Search Results

10" Disc Brake Assemblies

Stainless Steel

BEARING 1-1/16" [44649] qty2 BEARING 1-3/8" [68149] qty2 SEAL 1-3/8"[UFP][257-168] qty2 BEARING PROTECTOR SET S/S #1.980 qty1 DISC ROTOR AND HUB S/S 10" 5L [UFP] qty2 DISC BRAKE CALIPER S/S LH [UFP DB35 qty1 DISC BRAKE CALIPER S/S RH [UFP DB35 qty1 7/16"X1"SHCS BOLT [UFP DISC CALIPER qty4 COTTER PIN 1/8"X1-1/4"[UFP AXLE] qty2

100-07134-GL ~ FENDER BRACKET TORSION AXLES ALUMINUM FENDER (KARAVAN)

REPRESENTATION PHOTO MAGIC TILT FENDER BRACKET ~ 100-07134-GL MOUNTING HARDWARE NOT INCLUDED MOUNTS TO TORSION ARM ON AXLE (USE NYLOCK NUTS)

100-07313-GL ~ FENDER BRACKET TORSION AXLES PLASTIC FENDER (KARAVAN)

REPRESENTATION PHOTO MAGIC TILT FENDER BRACKET ~ 100-07313-GL MOUNTING HARDWARE NOT INCLUDED MOUNTS TO TORSION ARM ON AXLE (USE NYLOCK NUTS)

12" Disc Brake Assemblies

2 sizes available

BEARING 1-1/4" [67048] qty2 BEARING 1-3/4" [25580] qty2 SEAL 1-3/4"[UFP][21333] qty2 BEARING PROTECTOR SET #2.717 qty1 DISC ROTOR AND HUB S/S 12" 8L [UFP] qty2 DISC BRAKE CALIPER S/S LH [UFP DB35 qty1 DISC BRAKE CALIPER S/S RH [UFP DB35 qty1 7/16"X1"SHCS BOLT [UFP DISC CALIPER qty4 COTTER PIN 1/8"X1-1/4"[UFP AXLE] qty2

2" x 2" 93" Track 76"SC Straight Spring Axles

3 sizes available

2"x2" 93" Track 75"SC "V" Spring Axles

5 sizes available

2"x2" 93" Track 75"SC Straight Spring Axles

2 sizes available

2"x2" 93" Track 76" SC "V" Spring Axles

7 sizes available

2"x2" 93" Track 77"SC Straight Spring Axles

2 sizes available

2"x2" 71" Track 57-3/8"SC Straight Spring Axles

4 sizes available

2"x2" 81.5" Track 68-3/8" SC "V" Spring Axles

3 sizes available

2"x2" 84" Track 67" SC "V" Spring Axles

4 sizes available

2"x2" 84" Track 67" SC Straight Axles

2X2X84TR 67SC 5L HD W/BRK. FLANG

2"x2" 84" Track 68" SC "V" Spring Axles

2X2X84TR 68SC 5LHD

2"x2" 84" Track 68"SC Straight Spring Axles

2 sizes available

2"x2" 86.5" Track 77 3/8"SC Straight Spring Axles

3 sizes available

2"x2" 86.5"Track 73-3/8"SC "V" Spring Axles

4 sizes available

2"x2" 87" Track 73-3/8"SC "V" Spring Axles

2 sizes available

2"x2" 88" Track 73-3/8"SC Straight Spring Axles

2 sizes available

2"x2" 91"Track 73"SC "V" Spring Axles

4 sizes available

2"x2" 91"Track 73"SC Straight Axles

2 sizes available

2"x2" 93.5" Track 80-3/8"SC Straight Spring Axles

3 sizes available

2"x2" 93" Track 77.5" SC "V" Spring Axles

3 sizes available

2"x2" 93" Track 77.5"SC Straight Spring Axles

2X2X93TR 77.5 SC 5L HD

2"x2" 93" Track 78.5"SC "V" Spring Axles

3 sizes available

2"x2" 93"Track 77"SC "V" Spring Axles

3 sizes available

2"x2" 95" Track 78.5"SC "V" Spring Axles

2 sizes available

2"x3" 84" Track 67"SC "V" Spring Axles

3 sizes available

2"x3" 86.5" Track 73-3/8"SC "V" Spring Axles

2 sizes available

2"x3" 86" Track 67"SC "V" Spring Axles

3 sizes available

2"x3" 91" Track 73"SC "V" Spring Axles

4 sizes available

2"x3" 93.5" Track 80-3/8"SC "V" Spring Axles

2 sizes available

2"x3" 93" Track 75"SC "V" Spring Axles

6 sizes available

2"x3" 93" Track 75"SC Straight Spring Axles

2 sizes available

2"x3" 93" Track 76.5"SC "V" Spring Axles

2 sizes available

2"x3" 93" Track 76"SC "V" Spring Axles

6 sizes available

2"x3" 93" Track 78.5"SC "V" Spring Axles

2 sizes available

2"x3" 93" Track 80-3/8"SC Straight Spring Axles

2 sizes available

2"x3" 93" Track 86"SC Straight Spring Axles

3 sizes available

2"x3" 95" Track 76"SC "V" Spring Axles

2 sizes available

200-00061 ~ TORSION AXLE 2-1/2" "V" 88-3/4T 78FW 3.75K W/HUBS KNOTT (KARAVAN)

REPRESENTATION PHOTO MAGIC TILT TORSION AXLE W/ HUBS (KNOTT) TRACK (HUB FACE TO HUB FACE): 88-3/4" LUG NUTS NOT INCLUDED MOUNTING HARDWARE (NOT INCLUDED) ALUMINUM TUBE FRAME BOTTOM CHANNEL PY9145-T ALUMINUM I-BEAM FRAME PY9145 GALVANIZED TUBE FRAME U-BOLTS 95x12x10

200-00102 ~ TORSION AXLE 2-1/2" "V" 89-1/4T 74-1/2FW 3.75K W/HUBS KNOTT (KARAVAN)

REPRESENTATION PHOTO MAGIC TILT TORSION AXLE W/ HUBS (KNOTT) TRACK (HUB FACE TO HUB FACE): 89-1/4" LUG NUTS NOT INCLUDED MOUNTING HARDWARE (NOT INCLUDED) ALUMINUM TUBE FRAME BOTTOM CHANNEL PY9145-T ALUMINUM I-BEAM FRAME PY9145 GALVANIZED TUBE FRAME U-BOLTS 96x12x10

200-00124-GL ~ TORSION AXLE 2-1/4" STRAIGHT 53T 44FW 1.5K W/HUBS KNOTT (KARAVAN)

REPRESENTATION PHOTO MAGIC TILT TORSION AXLE W/ HUBS (KNOTT) TRACK (HUB FACE TO HUB FACE): 53" LUG NUTS NOT INCLUDED MOUNTING HARDWARE (NOT INCLUDED) ALUMINUM TUBE FRAME BOTTOM CHANNEL PY9145-T ALUMINUM I-BEAM FRAME PY9145 GALVANIZED TUBE FRAME U-BOLTS 60x13x8

206-00116-AL ~ 1-AXLE FENDER ALUMINUM 8" x 9-3/4" x 26-1/2" (KARAVAN)

REPRESENTATION PHOTO PRIMARILY USED ON KARAVAN TRAILERS WITH KNOTT TORSION AXES AND 13" TIRES (MAY WORK IN OTHER APPLICATIONS) COMES WITH PRE-DRILLED HOLES FOR 100-07134-GL FENDER BRACKET ON KNOTT TORSION AXLES MOUNTING HARDWARE NOT INCLUDED

3-1/2" x 3-1/2" 79"FW Straight Torsion Axles

3 sizes available

3-1/2" x 3-1/2" 79"FW "V" Torsion Axles

3 sizes available

3" x 3" 69"FW Straight Torsion Axles

2 sizes available

3" x 3" 70"FW "V" Torsion Axles

2 sizes available

3" x 3" 70"FW Straight Torsion Axles

2 sizes available

3" x 3" 76"FW "V" Torsion Axles

2 sizes available

3" x 3" 76"FW Straight Torsion Axles

2 sizes available

3" x 3" 79"FW "V" Torsion Axles

3 sizes available

3" x 3" 79"FW Straight Torsion Axles

2 sizes available

3" x 3" FW 86" Straight Torsion Axles

AX[STR]3X3 W/5LUG 86FRM ASSY

4" x 4" 79"FW Straight Torsion Axles

7 sizes available

Aluminum Fenders for Single Axle Trailers

5 sizes available

Round fender covers 1 tire on your single-axle trailer Acts as a splash guard to keep road debris from hitting other vehicles and to help protect your trailer's cargo Diamond tread plating provides a stylish look and non-slip surface Sturdy, lightweight, 14-gauge aluminum construction resists corrosion bolt-on installation Not pre-drilled Mounting brackets for bolt-on installation sold separately Made in the USA

Aluminum Fenders for Tandem Axle Trailers

2 sizes available

Aluminum Smooth Fenders for Single Axle Trailers

4 sizes available

DECAL NOT INCLUDED

Aluminum Smooth Fenders for Tandem Axle Trailers

4 sizes available

Magic Tilt Non-Skid not included

Angles for Single Axle

11 sizes available

Bearing Kits & Conversion Kits

HD 1-3/4"X1-1/4" UFP

Kit Includes: Part Description Qty PE1550 BEARING HD 1-1/4" [15123] 1 PE1600 BEARING 1-3/4" [25580] 1 PE1850 RACE-HD 1-1/4" [15245] 1 PE1900 RACE 1-3/4" [25520] 1 PE2101 SEAL 1-3/4"[UFP][21333] 1 PH2012 COTTER PIN 1/8"X1-1/4"[UFP AXLE] 1

Brake Line Kits for Single Axle

6 sizes available

1- HYD. BRAKE HOSE W/SWIVEL 19' 1- HYD.BRAKE/BRASS T-FITTING 1- HYD. BRAKE HOSE W/SWIVEL 1' 1- HYD. BRAKE HOSE W/SWIVEL 6'6" 10 - PLASTIC WIRE TIE HD 14-1/2""

BRAKE PADS

UNIVERSAL BRAKE PAD (SET)

Complete axle set, pre-boxed as full axle set of 4

COTTER PINS

COTTER PIN 1/8"X1-1/4"[UFP AXLE]

Double Eye Springs

5 sizes available

Galvanized Fenders for Single Axle Trailers

8 sizes available

Galvanized Fenders for Tandem Axle Trailers

4 sizes available

PD1300 ~ 4-LUG HUB ASSEMBLY 1-1/16"

REPRESENTATION PHOTO MAGIC TILT HUB KIT ASSEMBLY ~ PD1300 INCLUDES: 1 x HUB W/ RACE-DACRO 1-1/16" 4-LUG 4 x LUG NUT 13/16" 2 x BEARING 1-1/16" (44649) 1 x SEAL 1-1/16" (198-125) 1 x DUST CAP (1.980) 1 x COTTER PIN 1/8" x 1-3/4" PLATED DO YOU NEED BEARING PROTECTORS AND BRAS? (NOT INCLUDED) PF1054 BEARING PROTECTOR PF1060 BRA

PD1600 ~ 5-LUG HUB ASSEMBLY 1-1/16" BEARINGS 1.38" ID SEAL GREASED (UFP)

REPRESENTATION PHOTO MAGIC TILT KUB KIT ASSEMBLY ~ PD1600 INCLUDES: 1 x HUB ZINC W/ RACES 5-LUG 5 x LUG NUT 13/16" 2 x BEARING 1-1/16" (44649) 1 x SEAL 1-1/16" UFP (198-138) 1 x DUST CAP 1" (1.980) 1 x COTTER PIN 1/8" x 1-3/4" PLATED DO YOU NEED? (NOT INCLUDED) PF1054 BEARING PROTECTOR PF1060 BRA

PD1602-L ~ 5-LUG HUB ASSEMBLY 1-1/16" BEARINGS 1.25" ID SEAL GREASED (UFP & NON-UFP)

REPRESENTATION PHOTO MAGIC TILT PRE-GREASED HUB ASSEMBLY ~ PD1602-L APPLICATION: ALL 1-1/2" x 1-1/2" AXLES USING 1-1/16" BEARINGS AND 1.25" ID SEAL (UFP AND NON-UFP) ALL 2" x 2" 1,500 TO 2,500-POUND UFP AXLES FROM 2022 ON COMES PRE-GREASED AND ASSEMBLED - READY TO USE IF YOU HAVE A 2" x 2" UFP AXLE THAT USES 1-1/16" BEARINGS A 1.38" ID SEAL, USE PD1600 HUB KIT. INCLUDES: 1 x PD1670 GALV HUB 5 x PD2250 LUG NUT 1/2" 2 x PE1400 BEARING 1-1/16" (44649) (INSTALLED) 2 x PE1710 RACE (44610) (INSTALLED) 1 x PE2010 SEAL 1.98" OD x 1.25" ID (INSTALLED) 1 x PE2301 POSI-LUBE DUST CAP 1.98" 1 x PE2311 POSI-LUBE RUBBER PLUG 1 x PH2014 COTTER PIN 1/8" x 1-3/4" PLATED DO YOU NEED? (NOT INCLUDED) PF1054 BEARING PROTECTOR PF1060 BRA

PD1700-L ~ 5-LUG HUB ASSEMBLY 1-1/16"x1-3/8" GREASED (UFP)

Magic Tilt Pre-Greased Hub Assembly ~ PD1700-L Any Axle Using 1-1/16" x 1-3/8" Bearings and a seal with 1.68" ID Included in this kit: 1 x PD1760 Galv Hub 5 x PD2250 Lug Nut 1/2" 1 x PE1400 Bearing 1-1/16" (44649) (Installed) 1 x PE1450 Bearing 1-3/8" (68149) (Installed) 1 x PE1710 Race (44610) (Installed) 1 x PE1750 Race (68111) (Installed) 1 x PE2055 Seal 2.561" OD x 1.687" ID (Installed) 1 x PE2301 Posi-Lube Dust Cap 1.98" 1 x PE2311 Posi-Lube Rubber Plug 1 x PH2012 Cotter Pin 1/8" x 1-1/4" Plated Good to know: Comes pre-greased and assembled - ready to use Need? (sold separately) PF1054 Bearing Protector PF1060 Bra

PD1702-L ~ 5-LUG HUB ASSEMBLY 1-1/16"x1-3/8" GREASED (NON UFP)

REPRESENTATION PHOTO MAGIC TILT PRE-GREASED HUB ASSEMBLY ~ PD1702-L INCLUDES: 1 x PD1760 GALV HUB 5 x PD2250 LUG NUT 1/2" 1 x PE1400 BEARING 1-1/16" (44649) (INSTALLED) 1 x PE1450 BEARING 1-3/8" (68149) (INSTALLED) 1 x PE1710 RACE (44610) (INSTALLED) 1 x PE1750 RACE (68111) (INSTALLED) 1 x PE2050 SEAL 2.565" OD x 1.719" ID (INSTALLED) 1 x PE2301 POSI-LUBE DUST CAP 1.98" 1 x PE2311 POSI-LUBE RUBBER PLUG 1 x PH2014 COTTER PIN 1/8" x 1-3/4" PLATED COMES PRE-GREASED AND ASSEMBLED - READY TO USE DO YOU NEED? (NOT INCLUDED) PF1054 BEARING PROTECTOR PF1060 BRA

PD1857 ~ 6-LUG HUB WITH RACE 1-1/4" x 1-3/4" GALVANIZED

REPRESENTATION PHOTO MAGIC TILT HUB WITH RACE ~ PD1857 INCLUDES RACES ALREADY INSTALLED NOT INCLUDED USE BEARING KITS PE1201 (UFP AXLES) OR PE1250 (NON-UFP AXLES) BEARING PROTECTOR PF1101 AND BRA PF1063

PD1861-L ~ 8-LUG HUB ASSEMBLY 1-1/4"x1-3/4" GREASED (NON-UFP)

REPRESENTATION PHOTO MAGIC TILT PRE-GREASED HUB ASSEMBLY ~ PD1861-L ALL 6K TO 7K AXLES THAT USE A 2.23" ID SEAL AND A 1" CASTLE NUT INCLUDES: 1 x PD1860 GALV HUB W/ LONG STUDS 8 x PD2250 LUG NUT 1/2" 1 x PE1555 BEARING 1-1/4" (14125A) (INSTALLED) 1 x PE1600 BEARING 1-3/4" (25580) (INSTALLED) 1 x PE1855 RACE OUTER (14276) (INSTALLED) 1 x PE1900 RACE INNER (25520) (INSTALLED) 1 x PE2100 SEAL 3.38" OD x 2.23" ID (22333) (INSTALLED) 1 x PE2308 POSI-LUBE DUST CAP 2.717" 1 x PE2311 POSI-LUBE RUBBER PLUG 1 x PH1340 COTTER PIN 1/8" x 1-3/4" PLATED COMES PRE-GREASED AND ASSEMBLED - READY TO USE

PD2450-L ~ 6-LUG HUB ASSEMBLY 1-1/4"x1-3/4" GREASED (NON UFP)

REPRESENTATION PHOTO MAGIC TILT PRE-GREASED HUB ASSEMBLY ~ PD2450-L INCLUDES: 1 x PD1857 GALV HUB W/ LONG STUDS 6 x PD2250 LUG NUT 1/2" 1 x PE1550 BEARING 1-1/4" (15123) (INSTALLED) 1 x PE1600 BEARING 1-3/4" (25580) (INSTALLED) 1 x PE1850 RACE OUTER (15245) (INSTALLED) 1 x PE1900 RACE INNER (25520) (INSTALLED) 1 x PE2100 SEAL 3.38" OD x 2.25" ID (22333) (INSTALLED) 1 x PE2303 POSI-LUBE DUST CAP 2.441" 1 x PE2311 POSI-LUBE RUBBER PLUG 1 x PH2014 COTTER PIN 1/8" x 1-3/4" PLATED COMES PRE-GREASED AND ASSEMBLED - READY TO USE DO YOU NEED? (NOT INCLUDED) PF1101 BEARING PROTECTOR PF1063 BRA

PD2550-L ~ 6-LUG HUB ASSEMBLY 1-1/4"x1-3/4" GREASED (UFP)

REPRESENTATION PHOTO MAGIC TILT PRE-GREASED HUB ASSEMBLY ~ PD2550-L ANY AXLE USING 1-1/4" x 1-3/4" BEARINGS, A SEAL WITH 2.125" ID, PH2130 HARDWARE INCLUDES: 1 x PD1857 GALV HUB W/ 2" LONG STUDS 6 x PD2250 LUG NUT 1/2" 1 x PE1550 BEARING 1-1/4" (151123) (INSTALLED) 1 x PE1600 BEARING 1-3/4" (25580) (INSTALLED) 1 x PE1850 RACE OUTER (15245) (INSTALLED) 1 x PE1900 RACE INNER (25520) (INSTALLED) 1 x PE2101 SEAL 3.38" OD x 2.125" ID (21333) (INSTALLED) 1 x PE2303 POSI-LUBE DUST CAP 2.441" 1 x PE2311 POSI-LUBE RUBBER PLUG 1 x PH2012 COTTER PIN 1/8" x 1-1/4" PLATED COMES PRE-GREASED AND ASSEMBLED - READY TO USE

PD2750 ~ 5-LUG MAINTENANCE-FREE HUB ASSEMBLY KNOTT (KARAVAN 200-00036-SP2)

REPRESENTATION PHOTO MAGIC TILT KNOTT HUB ASSEMBLY ~ PD2750 INCLUDES: 1 X GALVANIZED HUB WITH SEALED BEARINGS 5 X LUG NUTS PLATED 1 X CRUSH SPINDLE NUT 1 X DUST CAP 1 X DUST CAP O-RING PLEASE NOTE NEVER REUSE THE OLD AXLE NUT TIGHTEN THE NEW AXLE NUT TO 207 FT-LBS (280 NM)

PE1200 ~ BEARING KIT 1-1/4" x 1-3/4" SELECT 6-LUG UFP HUBS/ROTORS

REPRESENTATION PHOTO MAGIC TILT BEARING KIT ~ PE1200 APPLICATION: - USE ROTORS PG2027-1 & PG2027-2 PRIOR TO 3/24 WITH 2.328" DUST CAPS - 5,200-POUND UFP AXLES (2"x3" SPRING AND 3-1/2" TORSION) USING SEAL WITH 2.13" INSIDE DIAMETER INCLUDES: 1 x PE1500 1-1/4" BEARING (67048) 1 x PE1600 1-3/4" BEARING (25580) 1 x PE1800 RACE (67010) 1 x PE1900 RACE (25520) 1 x PE2101 SEAL (21333) 1 x PH2012 1/8" x 1-1/4" COTTER PIN

PE1201 ~ BEARING KIT 1-1/4" x 1-3/4" SELECT 6-LUG UFP HUBS/ROTORS

REPRESENTATION PHOTO MAGIC TILT BEARING KIT ~ PE1201 APPLICATION: - USE WITH HUB PD1857 , ROTORS PG2027-1 & PG2027-2 (AFTER 3/24 WITH 2.44" DUST CAPS) ON UFP AXLES - 5,200-POUND UFP AXLES (2"x3" SPRING AND 3-1/2" TORSION) USING 2.13" INSIDE DIAMETER SEALS - SELECT 6-LUG NON-UFP HUBS (D-MAX, KODIAK, DRUM) ON UFP AXLES USING 2.13" INSIDE DIAMETER SEALS INCLUDES: 1 x PE1550 1-1/4" BEARING (15123) 1 x PE1600 1-3/4" BEARING (25580) 1 x PE1850 RACE (15245) 1 x PE1900 RACE (25520) 1 x PE2101 SEAL (21333) 1 x PH2012 1/8" x 1-1/4" COTTER PIN

PE1250 ~ BEARING KIT 1-1/4" x 1-3/4" SELECT 6-LUG NON-UFP HUBS/ROTORS

REPRESENTATION PHOTO MAGIC TILT BEARING KIT ~ PE1250 APPLICATION: - USE WITH HUB PD1857 AND ROTORS PG2027-1 & PG2027-2 (AFTER 3/24 WITH 2.44" DUST CAPS) ON NON-UFP AXLES - 5,200-POUND NON-UFP AXLES (2"x3" SPRING AND 3-1/2" TORSION) USING SEAL WITH 2.23" INSIDE DIAMETER - SELECT 6-LUG NON-UFP HUBS (D-MAX, KODIAK, DRUM) ON NON-UFP AXLES ON AXLES USING A SEAL WITH 2.23" INSIDE DIAMETER INCLUDES: 1 x PE1550 BEARING HD 1-1/4" (15123) 1 x PE1600 BEARING 1-3/4" (25580) 1 x PE1850 RACE HD 1-1/4" (15245) 1 x PE1900 RACE 1-3/4" (25520) 1 x PE2100 SEAL 1-3/4" (22333) 1 x PH2014 COTTER PIN 1/8" x 1-3/4" PLATED

PE1255 ~ BEARING KIT 1-1/4" x 1-3/4" 8-LUG NON-UFP HUBS

REPRESENTATION PHOTO MAGIC TILT BEARING KIT ~ PE1255 USE WITH 8-LUG HUB PD1860 OR ROTORS PG2028-1 AND PG2028-2 ON NON-UFP AXLES INCLUDES: 1 x PE1555 BEARING 1-1/4" (14125A) 1 x PE1600 BEARING 1-3/4" (25580) 1 x PE1855 RACE 1-1/4" 8-LUG (14276) 1 x PE1900 RACE 1-3/4" (25520) 1 x PE2100 SEAL 1-3/4" (22333) 1 x PH2014 COTTER PIN 1/8" x 1-3/4" PLATED

PE1256 ~ BEARING KIT 1-1/4" x 1-3/4" 8-LUG UFP HUBS

REPRESENTATION PHOTO MAGIC TILT BEARING KIT ~ PE1256 USE WITH 8-LUG HUB PD1860 OR ROTORS PG2028-1 AND PG2028-2 ON UFP AXLES INCLUDES: 1 x PE1555 BEARING 1-1/4" (14125A) 1 x PE1600 BEARING 1-3/4" (25580) 1 x PE1855 RACE 1-1/4" 8-LUG (14276) 1 x PE1900 RACE 1-3/4" (25520) 1 x PE2101 UFP SEAL 1-3/4" (21333) 1 x PH2012 x COTTER PIN 1/8" x 1-1/4" (UFP AXLE)

PE2010 ~ SEAL 1-1/16" SPINDLES NON-UFP, UFP AFTER 2019 (125-198)

REPRESENTATION PHOTO MAGIC TILT GREASE SEAL ~ PE2010 SOLD INDIVIDUALLY APPLICATION: USED ON NON-UFP 1,500 TO 2,500 POUND AXLES WITH 1-1/6" X 1-1/16" SPINDLES USED ON UFP 1,500 TO 2,500 POUND AXLES WITH 1-1/6" X 1-1/16" SPINDLES AFTER 2019 FOR UFP 1,500 TO 2,500 POUND AXLES PRIOR TO 2020, USE SEAL PE2015

PE2015 ~ SEAL 1-1/16" SPINDLES UFP BEFORE 2020 (138-198)

REPRESENTATION PHOTO MAGIC TILT GREASE SEAL ~ PE2015 SOLD INDIVIDUALLY UFP 2", 2.5K AXLES BUILT AFTER MID 2019 USE THE PE2010 SEAL WITH 1.25" INSIDE DIAMETER. MEASURE THE SPINDLE SURFACE FOR THE SEAL BEFORE ORDERING.

PE2100 ~ SEAL 1-3/4" NON-UFP (22333)

REPRESENTATION PHOTO MAGIC TILT GREASE SEAL ~ PE2100 SOLD INDIVIDUALLY FOR USE ON 4 x 4 TORSION AXLES

PG1030 COMPLETE 5-LUG DISC BRAKE KIT ≤7.5K TOP-MOUNT (DEXTER / UFP)

REPRESENTATION PHOTO IF YOU WANT TO ADD BRAKES TO A TRAILER THAT WAS NEVER EQUIPPED WITH THEM, MAKE SURE THERE IS AT LEAST FOUR-INCHES OF CLEARANCE FROM THE BRAKE MOUNTING PLATE ON THE AXLE OR TORSION ARM TO THE OUTSIDE EDGE OF THE FRAME. MAGIC TILT BRAKE KIT ~ PG1030 NEW TOP-MOUNT ACTUATOR REPLACES THE PG1088 INLINE 3-HOLE ACTUATOR ON 3" TALL TONGUES. NEW HOLES WILL NEED TO BE DRILLED IN THE TRAILER TONGUE. COMES WITH PG4856 DOUBLE BANJO FITTING TO CONNECT BRAKE LINES. UFP SPINDLE MOUNTING HARDWARE (NOT INCLUDED): PH2125 IF USING ON NON-UFP AXLES WITH 1" SPINDLE THREADS YOU WILL NEED THE PH2160 CONVERSION KIT (NOT INCLUDED). ADDITIONAL AXLE(S) BRAKE KIT PG1040 (NOT INCLUDED) INCLUDES: 2 x BEARING 1-1/16" (44649) 2 x BEARING 1-3/8" (68149) 2 x SEAL 1-3/8" UFP (257-168) 1 x BEARING PROTECTOR SET SS 1.980 1 x PG1072 ACTUATOR TOP MOUNT DISC DEMCO #7,000 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 8' 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 23' 2 x PG2026-1 DISC ROTOR AND HUB 10" 5-LUG UFP 1 x CALIPER FITTING PLUG UFP #32212 1 x PG5003 DISC BRAKE CALIPER ASSEMBLY LH UFP DB3 (DOUBLE BANJO FITTING) 1 x PG5005 DISC BRAKE CALIPER ASSEMBLY RH UFP DB3 (DOUBLE BANJO FITTING) 4 x 7/16" x 1" SHCS BOLT UFP DISC CALIPER 1 x PL2128 5-WAY FULL GROUND WIRE HARNESS 30' 6 x PLASTIC WIRE TIE HD 14-1/2" 2 x 1/4" CHAIN W/ ONE HOOK 40" 3 x CAPSCREW PLATED NC 1/2 x 4-1/2 GR5 3 x NUT LOCK NI 1/2-13 PLATED OWNERS MANUAL

PG1031 COMPLETE 5-LUG DISC BRAKE KIT ≤7.5K IN-LINE (DEXTER / UFP)

REPRESENTATION PHOTO IF YOU WANT TO ADD BRAKES TO A TRAILER THAT WAS NEVER EQUIPPED WITH THEM, MAKE SURE THERE IS AT LEAST FOUR-INCHES OF CLEARANCE FROM THE BRAKE MOUNTING PLATE ON THE AXLE OR TORSION ARM TO THE OUTSIDE EDGE OF THE FRAME. MAGIC TILT BRAKE KIT ~ PG1031 COMES WITH PG4856 DOUBLE BANJO FITTING TO CONNECT BRAKE LINES. IF USING ON NON-UFP AXLES WITH 1" SPINDLE THREADS YOU WILL NEED THE PH2160 CONVERSION KIT (NOT INCLUDED) UFP SPINDLE MOUNTING HARDWARE (NOT INCLUDED): PH2125 ADDITIONAL AXLE(S) BRAKE KIT PG1040 (NOT INCLUDED) INCLUDES: 2 x BEARING 1-1/16" (44649) 2 x BEARING 1-3/8" (68149) 2 x SEAL 1-3/8" UFP (257-168) 1 x BEARING PROTECTOR SET SS 1.980 1 x PG1090 ACTUATOR IN-LINE DISC UFP #7500 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 8' 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 23' 2 x PG2026-1 DISC ROTOR AND HUB 10" 5-LUG UFP 1 x CALIPER FITTING PLUG UFP #32212 1 x PG5003 DISC BRAKE CALIPER ASSEMBLY LH UFP DB3 (DOUBLE BANJO FITTING) 1 x PG5005 DISC BRAKE CALIPER ASSEMBLY RH UFP DB3 (DOUBLE BANJO FITTING) 4 x 7/16" x 1" SHCS BOLT UFP DISC CALIPER 1 x PL2128 5-WAY FULL GROUND WIRE HARNESS 30' 6 x PLASTIC WIRE TIE HD 14-1/2" 2 x 1/4" CHAIN W/ ONE HOOK 40" 4 x CAPSCREW PLATED NC 1/2 x 4-1/2 GR5 4 x NUT LOCK NI 1/2-13 PLATED OWNERS MANUAL

PG1033 COMPLETE 5-LUG DISC BRAKE KIT 7.5K TO 16K (DEXTER / UFP)

REPRESENTATION PHOTO IF YOU WANT TO ADD BRAKES TO A TRAILER THAT WAS NEVER EQUIPPED WITH THEM, MAKE SURE THERE IS AT LEAST FOUR-INCHES OF CLEARANCE FROM THE BRAKE MOUNTING PLATE ON THE AXLE OR TORSION ARM TO THE OUTSIDE EDGE OF THE FRAME. MAGIC TILT BRAKE KIT ~ PG1033 COMES WITH PG4856 DOUBLE BANJO FITTING TO CONNECT BRAKE LINES. UFP SPINDLE MOUNTING HARDWARE (NOT INCLUDED): PH2125 IF USING ON NON-UFP AXLES WITH 1" SPINDLE THREADS YOU WILL NEED THE PH2160 CONVERSION KIT (NOT INCLUDED) ADDITIONAL AXLE(S) BRAKE KIT PG1040 (NOT INCLUDED) INCLUDES: 2 x BEARING 1-1/16" (44649) 2 x BEARING 1-3/8" (68149) 2 x SEAL 1-3/8" UFP (257-168) 2 x BEARING PROTECTOR 1.980 STAINLESS 1 x PG1095 ACTUATOR IN-LINE DISC #16,000 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 8' 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 23' 2 x PG2026-1 DISC ROTOR AND HUB 10" 5-LUG UFP 1 x CALIPER FITTING PLUG UFP #32212 1 x PG5003 DISC BRAKE CALIPER ASSEMBLY LH UFP (DOUBLE BANJO FITTING) 1 x PG5005 DISC BRAKE CALIPER ASSEMBLY RH UFP (DOUBLE BANJO FITTING) 4 x 7/16" x 1" CALIPER BOLT UFP 1 x PL2128 5-WAY HARNESS 30' 6 x PLASTIC WIRE TIE HD 14-1/2" 2 x 1/4" CHAIN W/ ONE HOOK 40" 4 x CAPSCREW PLATED NC 1/2 x 4-1/2 GR5 4 x NUT LOCK NI 1/2-13 PLATED OWNERS MANUAL

PG1037 COMPLETE 6-LUG DISC BRAKE KIT 10K TO 16K (DEXTER / UFP)

REPRESENTATION PHOTO IF YOU WANT TO ADD BRAKES TO A TRAILER THAT WAS NEVER EQUIPPED WITH THEM, MAKE SURE THERE IS AT LEAST FOUR-INCHES OF CLEARANCE FROM THE BRAKE MOUNTING PLATE ON THE AXLE OR TORSION ARM TO THE OUTSIDE EDGE OF THE FRAME. MAGIC TILT BRAKE KIT ~ PG1037 COMES WITH PG4856 DOUBLE BANJO FITTING TO CONNECT BRAKE LINES. UFP SPINDLE MOUNTING HARDWARE (NOT INCLUDED): PH2130 IF USING ON NON-UFP AXLES WITH 1" SPINDLE THREADS YOU WILL NEED THE PH2165 CONVERSION KIT (NOT INCLUDED) ADDITIONAL AXLE(S) BRAKE KIT PG1042 (NOT INCLUDED) INCLUDES: 2 x BEARING 1-1/4" UFP 2 x BEARING 1-3/4" UFP (25580) 2 x SEAL 1-3/4" UFP (21333) 2 x PF1101 STAINLESS BEARING PROTECTOR 2.441" 1 x PG1095 ACTUATOR DISC UFP #16,000 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 8' 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 23' 2 x PG2027-1 DISC ROTOR AND HUB 12" 6-LUG UFP 1 x CALIPER FITTING PLUG UFP #32212 1 x PG5003 DISC BRAKE CALIPER ASSEMBLY LH UFP DB3 (DOUBLE BANJO FITTING) 1 x PG5005 DISC BRAKE CALIPER ASSEMBLY RH UFP DB3 (DOUBLE BANJO FITTING) 4 x DISC CALIPER BOLT 7/16" x 1" SHCS (UFP) 1 x PL2128 5-WAY FULL GROUND WIRE HARNESS 30' 6 x PLASTIC WIRE TIE HD 14-1/2" 2 x CHAIN W/ ONE HOOK 40" 4 x CAPSCREW PLATED NC 1/2" x 4-1/2" GR5 4 x NUT LOCK NI 1/2-13 PLATED OWNERS MANUAL

PG1038 COMPLETE 8-LUG DISC BRAKE KIT 12K TO 20K (DEXTER / UFP)

REPRESENTATION PHOTO IF YOU WANT TO ADD BRAKES TO A TRAILER THAT WAS NEVER EQUIPPED WITH THEM, MAKE SURE THERE IS AT LEAST FOUR-INCHES OF CLEARANCE FROM THE BRAKE MOUNTING PLATE ON THE AXLE OR TORSION ARM TO THE OUTSIDE EDGE OF THE FRAME. MAGIC TILT BRAKE KIT ~ PG1038 TANDEM 8,000-POUND (8-LUG) AXLE TRAILERS COMES WITH PG4856 DOUBLE BANJO FITTING TO CONNECT BRAKE LINES. UFP SPINDLE MOUNTING HARDWARE (NOT INCLUDED): PH2130 IF USING ON NON-UFP AXLES WITH 1" SPINDLE THREADS YOU WILL NEED THE PH2165 CONVERSION KIT (NOT INCLUDED) ADDITIONAL AXLE(S) BRAKE KIT PG1044 (NOT INCLUDED) INCLUDES: 2 x BEARING 1-1/4" UFP 2 x BEARING 1-3/4" UFP (25580) 2 x SEAL 1-3/4" UFP (21333) 1 x BEARING PROTECTOR SET SS 2.717 1 x PG1096 DEMCO ACTUATOR DISC #20000 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 8' 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 23' 2 x PG2028-1 DISC ROTOR AND HUB 12" 8-LUG UFP 1 x CALIPER FITTING PLUG UFP #32212 1 x PL2142 5-WAY FULL GROUND WIRE HARNESS 40' 1 x PG5003 DISC BRAKE CALIPER ASSEMBLY LH UFP DB3 (DOUBLE BANJO FITTING) 1 x PG5005 DISC BRAKE CALIPER ASSEMBLY RH UFP DB3 (DOUBLE BANJO FITTING) 4 x DISC CALIPER BOLT 7/16" x 1" SHCS (UFP) 6 x PLASTIC WIRE TIE HD 14-1/2" 2 x CHAIN W/ ONE HOOK 40" 4 x CAPSCREW PLATED NC 1/2" x 4-1/2" GR5 4 x NUT LOCK NI 1/2-13 PLATED OWNERS MANUAL

PG1040 ADDITIONAL AXLE 5-LUG DISC BRAKE KIT (DEXTER / UFP)

REPRESENTATION PHOTO IF YOU WANT TO ADD BRAKES TO A TRAILER THAT WAS NEVER EQUIPPED WITH THEM, MAKE SURE THERE IS AT LEAST FOUR-INCHES OF CLEARANCE FROM THE BRAKE MOUNTING PLATE ON THE AXLE OR TORSION ARM TO THE OUTSIDE EDGE OF THE FRAME. MAGIC TILT BRAKE KIT ~ PG1040 COMES WITH PG4856 DOUBLE BANJO FITTING TO CONNECT BRAKE LINES. UFP SPINDLE MOUNTING HARDWARE (NOT INCLUDED): PH2125 IF USING ON NON-UFP AXLES WITH 1" SPINDLE THREADS YOU WILL NEED THE PH2160 CONVERSION KIT (NOT INCLUDED) INCLUDES: 2 x BEARING 1-1/16" (44649) 2 x BEARING 1-3/8" (68149) 2 x SEAL 1-3/8" UFP (257-168) 1 x BEARING PROTECTOR SET SS 1.980 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 4' 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 8' 2 x PG2026-1 DISC ROTER AND HUB 10" 5-LUG UFP 1 x CALIPER FITTING PLUG UFP #32212 1 x PG5003 DISC BRAKE CALIPER ASSEMBLY LH UFP DB3 (DOUBLE BANJO FITTING) 1 x PG5005 DISC BRAKE CALIPER ASSEMBLY RH UFP DB3 (DOUBLE BANJO FITTING) 4 x DISC CALIPER BOLT 7/16" x 1" SHCS (UFP) 6 x PLASTIC WIRE TIE HD 14-1/2" OWNERS MANUAL

PG1042 ADDITIONAL AXLE 6-LUG DISC BRAKE KIT (DEXTER / UFP)

REPRESENTATION PHOTO IF YOU WANT TO ADD BRAKES TO A TRAILER THAT WAS NEVER EQUIPPED WITH THEM, MAKE SURE THERE IS AT LEAST FOUR-INCHES OF CLEARANCE FROM THE BRAKE MOUNTING PLATE ON THE AXLE OR TORSION ARM TO THE OUTSIDE EDGE OF THE FRAME. MAGIC TILT BRAKE KIT ~ PG1042 COMES WITH PG4856 DOUBLE BANJO FITTING TO CONNECT BRAKE LINES. UFP SPINDLE MOUNTING HARDWARE (NOT INCLUDED): PH2130 IF USING ON NON-UFP AXLES WITH 1" SPINDLE THREADS YOU WILL NEED THE PH2165 CONVERSION KIT (NOT INCLUDED) INCLUDES: 2 x BEARING 1-1/4" 2 x BEARING 1-3/4" (25580) 2 x SEAL 1-3/4" UFP (21333) 2 x PF1101 STAINLESS BEARING PROTECTOR 2.441" 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 4' 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 8' 2 x PG2027-1 DISC ROTER AND HUB 12" 6-LUG UFP 1 x CALIPER FITTING PLUG UFP #32212 1 x PG5003 DISC BRAKE CALIPER ASSEMBLY LH UFP DB3 (DOUBLE BANJO FITTING) 1 x PG5005 DISC BRAKE CALIPER ASSEMBLY RH UFP DB3 (DOUBLE BANJO FITTING) 4 x DISC CALIPER BOLT 7/16" x 1" SHCS (UFP) 6 x PLASTIC WIRE TIE HD 14-1/2" OWNERS MANUAL

PG1044 ADDITIONAL AXLE 8-LUG DISC BRAKE KIT (DEXTER / UFP)

REPRESENTATION PHOTO IF YOU WANT TO ADD BRAKES TO A TRAILER THAT WAS NEVER EQUIPPED WITH THEM, MAKE SURE THERE IS AT LEAST FOUR-INCHES OF CLEARANCE FROM THE BRAKE MOUNTING PLATE ON THE AXLE OR TORSION ARM TO THE OUTSIDE EDGE OF THE FRAME. MAGIC TILT BRAKE KIT ~ PG1044 COMES WITH PG4856 DOUBLE BANJO FITTING TO CONNECT BRAKE LINES. UFP SPINDLE MOUNTING HARDWARE (NOT INCLUDED): PH2130 IF USING ON NON-UFP AXLES WITH 1" SPINDLE THREADS YOU WILL NEED THE PH2165 CONVERSION KIT (NOT INCLUDED) INCLUDES: 2 x BEARING 1-1/4" 2 x BEARING 1-3/4" (25580) 2 x SEAL 1-3/4" UFP (21333) 2 x BEARING PROTECTOR 2.328 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 4' 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 8' 1 x PG2028-1 DISC ROTER AND HUB 12" 8-LUG UFP 2 x CALIPER FITTING PLUG UFP #32212 1 x PG5003 DISC BRAKE CALIPER ASSEMBLY LH UFP DB3 (DOUBLE BANJO FITTING) 1 x PG5005 DISC BRAKE CALIPER ASSEMBLY RH UFP DB3 (DOUBLE BANJO FITTING) 4 x DISC CALIPER BOLT 7/16" x 1" SHCS (UFP) 6 x PLASTIC WIRE TIE HD 14-1/2" OWNERS MANUAL

PG1332 ~ BRAKE LINE KIT TO ADD SECOND AXLE SINGLE-BANJO

REPRESENTATION PHOTO MAGIC TILT BRAKE LINE KIT SECOND AXLE ~ PG1332 INCLUDES: 2 x PG1175 T-FITTINGS 2 x PG1178 1' BRAKE HOSE WITH SWIVEL 1 x PG1182 4' BRAKE HOSE WITH SWIVEL 1 x PG1183 6' 6" BRAKE HOSE WITH SWIVEL 6 x PL2954 14-1/2" PLASTIC WIRE TIES

PG1332-1 ~ BRAKE LINE KIT TO ADD SECOND AXLE DOUBLE-BANJO

REPRESENTATION PHOTO MAGIC TILT BRAKE LINE KIT SECOND AXLE ~ PG1332-1 INCLUDES: 1 x PG4862 BRAKE CALIPER FITTING PLUG 1 x PG1182 4' BRAKE HOSE WITH SWIVEL 1 x PG1186 8' BRAKE HOSE WITH SWIVEL 6 x PL2954 14" PLASTIC WIRE TIES

PG1334 ~ BRAKE LINE KIT TO ADD SECOND & THIRD AXLES SINGLE-BANJO

REPRESENTATION PHOTO MAGIC TILT BRAKE LINE KIT SECOND & THIRD AXLE ~ PG1334 INCLUDES: 4 x PG1175 T-FITTING 3 x PG1178 1' BRAKE HOSE WITH SWIVEL 2 x PG1182 4' BRAKE HOSE WITH SWIVEL 2 x PG1183 6' 6" BRAKE HOSE WITH SWIVEL 12 x PL2954 14" PLASTIC WIRE TIE

PG1334-1 ~ BRAKE LINE KIT TO ADD SECOND & THIRD AXLES DBL-BANJO

REPRESENTATION PHOTO MAGIC TILT BRAKE LINE KIT SECOND & THIRD AXLE ~ PG1334-1 INCLUDES: 1 x PG4862 CALIPER FIITING PLUG 2 x PG1182 4' BRAKE HOSE WITH SWIVEL 2 x PG1186 8' BRAKE HOSE WITH SWIVEL 12 x PL2954 14" PLASTIC WIRE TIE

PG2035 DISC BRAKE ASSEMBLY 8-LUG (DEXTER / UFP)

REPRESENTATION PHOTO IF YOU WANT TO ADD BRAKES TO A TRAILER THAT WAS NEVER EQUIPPED WITH THEM, MAKE SURE THERE IS AT LEAST FOUR-INCHES OF CLEARANCE FROM THE BRAKE MOUNTING PLATE ON THE AXLE OR TORSION ARM TO THE OUTSIDE EDGE OF THE FRAME. MAGIC TILT DISC BRAKE ASSEMBLY ~ PG2035 COMES WITH PG4856 DOUBLE BANJO FITTING TO CONNECT BRAKE LINES. UFP SPINDLE MOUNTING HARDWARE (NOT INCLUDED): PH2130 IF USING ON NON-UFP AXLES WITH 1" SPINDLE THREADS YOU WILL NEED THE PH2165 CONVERSION KIT (NOT INCLUDED) INCLUDES: 16 x LUG NUT 13/16" 2 x BEARING 1-1/4" (67048) 2 x BEARING 1-3/4" (25580) 2 x SEAL 1-3/4" UFP (21333) 1 x BEARING PROTECTOR SET 2.717 2 x PG2028-1 DISC ROTOR AND HUB 12" 8-LUG UFP 1 x PG5003 DISC BRAKE CALIPER ASSEMBLY LH UFP DB3 (DOUBLE BANJO FITTING) 1 x PG5005 DISC BRAKE CALIPER ASSEMBLY RH UFP DB3 (DOUBLE BANJO FITTING) 4 x 7/16" x 1" SHCS BOLT UFP DISC CALIPER 2 x COTTER PIN 1/8" x 1-1/4" UFP OWNERS MANUAL

PG2070-L ~ DISC BRAKE ASSEMBLY 5-LUG GREASED (DEXTER / UFP)

To Add brakes to a trailer that was never equipped with them, Confirm there is At least four-inches of clearance from the brake mounting plate on the axle or torsion arm to the outside edge of the frame. Magic Tilt Brake Assembly ~ PG2070-L Good to know: - Bearings, Races and seals are installed in rotors and greased (Ready-To-Go). - 2 x PE2050 Replacement Seals are in the box (Loose) To accomodate non-UFP spindles if needed. Customer is responsible for determination. - Ships with PG4856 Double banjo fittings to connect brake lines. - Includes UFP hub mounting hardware. If using on non-UFP axles with 1" Spindle Threads you'll also need the PH2160 Conversion Kit (Not Included). Included in this kit: 10 x PD2250 Lug Nut 13/16" 2 x PE1400 Bearing 1-1/16" (44649) - Installed 2 x PE1450 Bearing 1-3/8" (68149) - Installed 2 x PE2055 Seal 2.57" x 1.68" UFP (257-168) - Installed 2 x PF1054 Bearing Protector SS 1.980 2 x PF1060 Bearing Protector Bra 1.980 2 x PG2026-1 Disc Rotor And Hub 10" 5-Lug Plated UFP 1 x PG5003 Disc brake caliper assembly LH UFP db3 (Double Banjo Fitting) 1 x PG5005 Disc brake caliper assembly RH UFP db3 (Double Banjo Fitting) 4 x PG5007 Disc Caliper Bolt 7/16" x 1" Shcs (UFP) 2 x PH2012 Cotter Pin 1/8" x 1-1/4" Plated UFP 1 x PG4862 Caliper Fitting Plug Brass 2 x PH1980 Spindle Nut 13/16" UFP 2 x PH2108 Spindle Nut Retainer UFP 2 x PH2065 Axle D-Washer 3/4" x 3/32" UFP 2 x PE2050 Seal 2.55" x 1.71" Non-UFP - Loose Owners Manual

PG2071-L ~ DISC BRAKE ASSEMBLY 6-LUG GREASED (DEXTER / UFP)

REPRESENTATION PHOTO IF YOU WANT TO ADD BRAKES TO A TRAILER THAT WAS NEVER EQUIPPED WITH THEM, MAKE SURE THERE IS AT LEAST FOUR-INCHES OF CLEARANCE FROM THE BRAKE MOUNTING PLATE ON THE AXLE OR TORSION ARM TO THE OUTSIDE EDGE OF THE FRAME. MAGIC TILT DISC BRAKE ASSEMBLY ~ PG2071-L - BEARINGS, RACES AND SEALS ARE INSTALLED IN ROTORS AND GREASED (READY-TO-GO). - 2 x PE2100 REPLACEMENT SEALS ARE INCLUDED (LOOSE) TO ACCOMODATE NON-UFP SPINDLES IF NEEDED. CUSTOMER IS RESPONSIBLE FOR DETERMINATION. - COMES WITH PG4856 DOUBLE BANJO FITTING TO CONNECT BRAKE LINES. - INCLUDES UFP HUB MOUNTING HARDWARE. IF USING ON NON-UFP AXLES WITH 1" SPINDLE THREADS YOU WILL NEED THE PH2165 CONVERSION KIT (NOT INCLUDED). INCLUDES: 12 x PD2250 LUG NUT 13/16" 2 x PE1550 BEARING 1-1/4" (15123) - INSTALLED 2 x PE1600 BEARING 1-3/4" (25580) - INSTALLED 2 x PE2101 SEAL 3.37" x 2.13" UFP (21333) - INSTALLED 2 x PF1101 BEARING PROTECTOR SS 2.441" 2 x PF1063 BEARING PROTECTOR BRA 2.441" 2 x PG2027-1 DISC ROTOR AND HUB 12" 6-LUG PLATED UFP 1 x PG500 3 DISC BRAKE CALIPER ASSEMBLY LH UFP DB3 (DOUBLE BANJO FITTING) 1 x PG5005 DISC BRAKE CALIPER ASSEMBLY RH UFP DB3 (DOUBLE BANJO FITTING) 4 x PG5007 DISC CALIPER BOLT 7/16" x 1" SHCS (UFP) 2 x PH2012 COTTER PIN 1/8" x 1-1/4" PLATED UFP 1 x PG4862 CALIPER FITTING PLUG BRASS 2 x PH1980 SPINDLE NUT 13/16" UFP 2 x PH2108 SPINDLE NUT RETAINER UFP 2 x PH2066 AXLE D-WASHER 3/4" x 3/16" UFP 2 x PE2100 SEAL 3.37" x 2.23" NON-UFP - LOOSE OWNERS MANUAL

PG2100 ~ BRAKE FLANGE WELD-ON 4-BOLT

REPRESENTATION PHOTO MAGIC TILT BRAKE FLANGE ~ PG2100 FOR USE ON 3500 POUND SPRING AXLES

PG5058 ~ DISC BRAKE ADAPTER PLATE (DEXTER / UFP)

REPRESENTATION PHOTO MAGIC TILT ADAPTER PLATE ~ PG5058 ADAPTS 5-HOLE ROUND BRAKE PLATES TO 4-HOLE SQUARE ON 5.2K TO 7K AXLES. ALOWS DIRECT MOUNTING OF DEXTER / UFP CALIPERS ON 12" ROTORS. REQUIRES THE FOLLOWING HARDWARE (NOT INCLUDED) 5 X PY0215 3/8" x 1-1/14" BOLT 5 X PY1305 3/8" NYLOCK NUT

PH1300 ~ SPRING AXLE 2 x 2 (CUSTOM)

3.5K DEXTER / UFP

Magic Tilt Heavy duty custom spring axle no Hubs ~ PH1300 Contact us at 877-795-1965 for a shipping quote (V - Add PH0999, $27.95) V - Above Springs Only Good to know: Includes 4-Hole Square Brake Plate Axle will come with an "X" Drawn On The Tube. The x should face the back of the trailer when installed.

PH1305-1 ~ POSI-LUBE SPINDLE AXLE UPGRADE

REPRESENTATION PHOTO MAGIC TILT POSI-LUBE SPINDLE UPGRADE ~ PH1305-1 AXLES DO NOT COME STANDARD WITH THE POSI-LUBE FEATURE. THIS PART NUMBER UPGRADES THE STANDARD SPINDLES ON ONE AXLE TO POSI-LUBE. POSI-LUBE SPINDLES HAVE A GREASE FITTING ON THE END ALLOWING GREASE TO BE PUMPED TO THE BACK OF THE SPINDLE. WHILE MANY OLDER MAGIC TILT AXLES WERE BUILT WITH THIS FEATURE, IT IS NOW RECOMENDED TO USE BEARING PROTECTORS ON THE HUBS.

PH1305-2 ~ POSI-LUBE SPINDLE UPGRADE

REPRESENTATION PHOTO MAGIC TILT POSI-LUBE SPINDLE UPGRADE ~ PH1305-2 AXLES DO NOT COME STANDARD WITH THE POSI-LUBE FEATURE. THIS PART NUMBER UPGRADES THE STANDARD SPINDLES ON ONE AXLE TO POSI-LUBE. POSI-LUBE SPINDLES HAVE A GREASE FITTING ON THE END ALLOWING GREASE TO BE PUMPED TO THE BACK OF THE SPINDLE. WHILE MANY OLDER MAGIC TILT AXLES WERE BUILT WITH THIS FEATURE, IT IS NOW RECOMENDED TO USE BEARING PROTECTORS ON THE HUBS.

PH1320 ~ REMOVABLE SPINDLE 3750# TORSION DEXTER / TIE DOWN

REPRESENTATION PHOTO MAGIC TILT TORSION AXLE SPINDLE ~ PH1320 INCLUDES: 1" NUT, WASHER AND COTTER PIN FOR MOUNTING SPINDLE TO TORSION ARM DOES NOT INCLUDE FOLLOWING SPINDLE-TO-HUB HARDWARE: PH2060 SPINDLE WASHER PH2000 SPINDLE NUT PH2014 COTTER PIN USE WITH FOLLOWING HUBS (NOT INCLUDED): PD1702-L IDLER HUB KIT PG2026-1 DISC ROTOR

PH1325 ~ TORSION ARM 3" AXLES NON-POSI LUBE DEXTER / UFP

REPRESENTATION PHOTO MAGIC TILT TORSION ARM & SPINDLE ~ PH1325 CAUTION – MAKE SURE YOU PROPERLY IDENTIFY YOUR BRAND OF TORSION ARM AS UFP (SEE SECOND IMAGE) INCLUDES 4-HOLE BRAKE PLATE AND TORSION ARM MOUNTING BOLT REQUIRES THE FOLLOWING HUB MOUNTING HARDWARE KIT PH2125 (NOT INCLUDED)

PH1327 ~ TORSION ARM 3" AXLES W/ POSI-LUBE DEXTER / UFP

REPRESENTATION PHOTO MAGIC TILT TORSION ARM & SPINDLE ~ PH1327 CAUTION – MAKE SURE YOU PROPERLY IDENTIFY YOUR BRAND OF TORSION ARM AS UFP (SEE SECOND IMAGE) INCLUDES 4-HOLE BRAKE PLATE AND TORSION ARM MOUNTING BOLT REQUIRES THE FOLLOWING HUB MOUNTING HARDWARE KIT PH2125 (NOT INCLUDED)

PH1330 ~ TORSION ARM 3-1/2" AXLES SQUARE PLATE DEXTER / UFP

REPRESENTATION PHOTO MAGIC TILT TORSION ARM & SPINDLE ~ PH1330 INCLUDES 4-HOLE BRAKE PLATE AND TORSION ARM-TO-AXLE MOUNTING HARDWARE

PH1349 ~ TORSION AXLE WELD-ON BRACKET 3" DEXTER / UFP

REPRESENTATION PHOTO MAGIC TILT WELD-ON BRACKET

PH1374 ~ TORSION AXLE 2-1/2" "V" 93T 79FW 3.8K NO HUBS DEXTER / TIE DOWN

REPRESENTATION PHOTO MAGIC TILT TORSION AXLE WITHOUT HUBS TIE DOWN ~ PH1374 ( PLEASE CALL 941-358-1117 FOR SHIPPING QUOTE) FRAME WIDTH: 80-1/2" (INSIDE MOUNT) 79" (OUTSIDE MOUNT) TRACK (HUB-FACE TO HUB-FACE): 93" INCLUDES 4-HOLE SQUARE BRAKE PLATES ADD-ONS (NOT INCLUDED) FRAME MOUNTING HARDWARE: ALUMINUM TUBE FRAME BOTTOM CHANNEL PY9145-T I-BEAM ALUMINUM FRAME PY9145 GALVANIZED TUBE FRAME U-BOLTS

PH1450 ~ CUSTOM SPRING AXLE 2x3 UP TO 89T 5-6K DEXTER / UFP

REPRESENTATION PHOTO MAGIC TILT HEAVY DUTY CUSTOM SPRING AXLE NO HUBS ~ PH1450 PLEASE CALL 941-358-1117 FOR SHIPPING QUOTE (V - ADD PH0999, $27.95) V - ABOVE SPRINGS ONLY INCLUDES 4-HOLE SQUARE BRAKE PLATES STANDARD. CAN BE ORDERED WITH 5-HOLE ROUND BRAKE PLATES AXLE WILL COME WITH AN "X" DRAWN ON THE TUBE. THE X SHOULD FACE THE BACK OF THE TRAILER WHEN INSTALLED.

PH1454 ~ TORSION AXLE 2-1/2" "V" 66-3/4T 56FW 2.1K W/HUBS KNOTT (KARAVAN 200-00049)

REPRESENTATION PHOTO MAGIC TILT TORSION AXLE W/ HUBS KNOTT ~ PH1454 TRACK (HUB FACE TO HUB FACE): 66-3/4" LUG NUTS NOT INCLUDED MOUNTING HARDWARE (NOT INCLUDED) ALUMINUM TUBE FRAME BOTTOM CHANNEL PY9145-T ALUMINUM I-BEAM FRAME PY9145 GALVANIZED TUBE FRAME U-BOLTS 74x12x10

PH1462 ~ TORSION AXLE 2-1/2" STRAIGHT 92T 81-1/2FW 3K W/ HUBS KNOTT

REPRESENTATION PHOTO MAGIC TILT TORSION AXLE WITH HUBS KNOTT ~ PH1462 ( PLEASE CALL 941-358-1117 FOR SHIPPING QUOTE) SPECIAL ORDER - PLEASE ALLOW EXTRA TIME FRAME WIDTH: 83" (INSIDE MOUNT) 81-1/2" (OUTSIDE MOUNT) TRACK (HUB FACE TO HUB FACE): 92" LUG NUTS NOT INCLUDED MOUNTING HARDWARE (NOT INCLUDED) ALUMINUM TUBE FRAME BOTTOM CHANNEL PY9145-T ALUMINUM I-BEAM FRAME PY9145 GALVANIZED TUBE FRAME U-BOLTS

PH1465 ~ TORSION AXLE 2-1/2" STRAIGHT 88-3/4T 77FW 3.8K W/ HUBS KNOTT (KARAVAN 200-200059-GL)

REPRESENTATION PHOTO MAGIC TILT TORSION AXLE WITH HUBS KNOTT ~ PH1465 ( PLEASE CALL 941-358-1117 FOR SHIPPING QUOTE) TRACK (HUB FACE TO HUB FACE): 88-3/4" LUG NUTS NOT INCLUDED MOUNTING HARDWARE (NOT INCLUDED) ALUMINUM TUBE FRAME BOTTOM CHANNEL PY9145-T I-BEAM ALUMINUM FRAME PY9145 GALVANIZED TUBE FRAME U-BOLTS

PH150-40 ~ TORSION ARM FOR 3" AXLES FA-35 (NON-UFP)

REPRESENTATION PHOTO MAGIC TILT TORSION ARM & SPINDLE ~ PH150-40 CAUTION – MAKE SURE YOU PROPERLY IDENTIFY YOUR BRAND OF TORSION ARM AS FA-35 (SEE SECOND IMAGE) INCLUDES 4-HOLE BRAKE PLATE, TORSION ARM MOUNTING BOLT, POSI-LUBE FITTING. THIS ARM WILL NOT WORK ON STANDARD DEXTER / UFP AXLES.

PH150-72 ~ TORSION AXLE WELD-ON BRACKET 4" UCF

REPRESENTATION PHOTO OUT OF STOCK MAGIC TILT MOUNTING BRACKET ~ PH150-72 TO ORDER, SELECT LEFT OR RIGHT FROM DROP-DOWN STANDING BEHIND TRAILER LOOKING FORWARD

PH1500 ~ CUSTOM SPRING AXLE 2x3 UP TO 88T 3.5K DEXTER / UFP

REPRESENTATION PHOTO MAGIC TILT HEAVY DUTY CUSTOM SPRING AXLE NO HUBS ~ PH1500 PLEASE CALL 941-358-1117 FOR SHIPPING QUOTE (V - ADD PH0999, $27.95) V - ABOVE SPRINGS ONLY INCLUDES 4-HOLE SQUARE BRAKE PLATES. AXLE WILL COME WITH AN "X" DRAWN ON THE TUBE. THE X SHOULD FACE THE BACK OF THE TRAILER WHEN INSTALLED.

PH1600 ~ TORSION AXLE 3x3 (CUSTOM) 73-95T 3.5K NO HUBS (NON UFP)

REPRESENTATION PHOTO MAGIC TILT CUSTOM 3x3 TORSION AXLE NO HUBS ~ PH1600 PLEASE CALL 941-358-1117 FOR SHIPPING QUOTE SPECIAL ORDER - PLEASE ALLOW ADDITIONAL TIME FOR SHIPPING V + $22.95 (PH0999) FRAME WIDTH MUST BE 63" OR GREATER INCLUDES 4-HOLE SQUARE BRAKE PLATES. MOUNTING HARDWARE (NOT INCLUDED) ALUMINUM TUBE FRAME BOTTOM CHANNEL PY9145-T I-BEAM ALUMINUM FRAME PY9145

PH1605 ~ CUSTOM TORSION AXLE 3-1/2x3-1/2 73-95T 5-6K DEXTER/UFP

REPRESENTATION PHOTO MAGIC TILT CUSTOM 3-1/2x3-1/2 TORSION AXLE NO HUBS ~ PH1605 (PLEASE CALL 941-358-1117 FOR SHIPPING QUOTE) SPECIAL ORDER - PLEASE ALLOW ADDITIONAL TIME FOR SHIPPING V + $22.95 (PH0999) INCLUDES 4-HOLE SQUARE BRAKE PLATES STANDARD. CAN BE ORDERED WITH 5-HOLE ROUND BRAKE PLATES. MOUNTING HARDWARE TO FRAME (NOT INCLUDED) ALUMINUM TUBE FRAME BOTTOM CHANNEL PY9145-T I-BEAM ALUMINUM FRAME PY9145

PH1752 ~ SPINDLE 1-1/16" x 1-1/16" 1.5K UCF

REPRESENTATION PHOTO MAGIC TILT SPINDLE ~ PH1752

PH1800 ~ SPINDLE 1-1/16" x 1-1/16" 2.5K DEXTER / UFP

REPRESENTATION PHOTO MAGIC TILT SPINDLE ~ PH1800

PH1849 ~ SPINDLE 1-1/16" x 1-3/8" 3.5K DEXTER / UFP

REPRESENTATION PHOTO MAGIC TILT SPINDLE ~ PH1849

PH1903 ~ SPINDLE 1-1/4" x 1-3/4" 5-6K DEXTER / UFP

REPRESENTATION PHOTO MAGIC TILT SPINDLE ~ PH1903 6,000 POUNDS (8-LUG)

PH1906 ~ SPINDLE 1-1/4" x 1-3/4" 5-6K DEXTER / UFP

REPRESENTATION PHOTO MAGIC TILT SPINDLE ~ PH1906 6,000 POUNDS (8-LUG)

PH1980 ~ SPINDLE NUT 13/16"

REPRESENTATION PHOTO MAGIC TILT SPINDLE NUT ~ PH1980 SOLD INDIVIDUALLY

PH2000 ~ SPINDLE NUT 1"

REPRESENTATION PHOTO MAGIC TILT SPINDLE NUT ~ PH2000 SOLD INDIVIDUALLY

PH2050 ~ AXLE WASHER 3/4" F436

REPRESENTATION PHOTO MAGIC TILT AXLE WASHER ~ PH2050 SOLD INDIVIDUALLY

PH2060 ~ AXLE WASHER 1"

REPRESENTATION PHOTO MAGIC TILT AXLE WASHER ~ PH2060 SOLD INDIVIDUALLY

PH2065 ~ AXLE D WASHER 3/4" x 13/16" x .137" (DEXTER / UFP)

REPRESENTATION PHOTO MAGIC TILT AXLE WASHER ~ PH2065 SOLD INDIVIDUALLY THINNER. USED ON 2000 TO 3500 LB. UFP AXLES

PH2066 ~ AXLE D WASHER 3/4" x 13/16" x .184" (DEXTER / UPF)

REPRESENTATION PHOTO MAGIC TILT AXLE WASHER ~ PH2066 SOLD INDIVIDUALLY THICKER. USED ON 5000 LB. AND GREATER UFP AXLES

PH2070 ~ AXLE D WASHER 1"

REPRESENTATION PHOTO MAGIC TILT AXLE WASHER ~ PH2070 SOLD INDIVIDUALLY

PH2105 ~ TANG WASHER 1"

REPRESENTATION PHOTO MAGIC TILT TANG WASHER ~ PH2105 SOLD INDIVIDUALLY

PH2108 ~ SPINDLE NUT RETAINER

REPRESENTATION PHOTO MAGIC TILT SPINDLE NUT RETAINER ~ PH2108 SOLD INDIVIDUALLY

PH2145 ~ HUB CONVERSION KIT 1-1/16" SPINDLES (NON-UFP HUBS to UFP AXLES)

REPRESENTATION PHOTO MAGIC TILT HUB CONVERSION KIT ~ PH2145 INCLUDES: ENOUGH HARDWARE TO CONVERT TWO HUBS TO 1-1/16" UFP-STYLE SPINDLES 2 x PE2010 SEAL 1-1/16" UFP (125-198) 2 x PH1980 SPINDLE NUT 13/16" UFP 2 x PH2012 COTTER PIN 1/8" x 1-1/4" UFP 2 x PH2065 3/4" AXLE D WASHER 3/32" UFP 2 x PH2108 SPINDLE NUT RETAINER UFP

PH2150 ~ HUB CONVERSION KIT 1-3/8" SPINDLES (NON-UFP HUBS to UFP AXLES)

REPRESENTATION PHOTO MAGIC TILT HUB CONVERSION KIT ~ PH2150 INCLUDES: ENOUGH HARDWARE TO CONVERT TWO HUBS TO 3.5K UFP-STYLE SPINDLES 2 x PE2055 SEAL 1-3/8" UFP (168-257) 2 x PH1980 SPINDLE NUT 13/16" UFP 2 x PH2012 COTTER PIN 1/8" x 1-1/4" UFP 2 x PH2065 3/4" AXLE D WASHER 3/32" UFP 2 x PH2108 SPINDLE NUT RETAINER UFP

PH2155 ~ HUB CONVERSION KIT 1-3/4" SPINDLES (NON-UFP HUBS to UFP AXLES)

REPRESENTATION PHOTO MAGIC TILT HUB CONVERSION KIT ~ PH2155 INCLUDES: ENOUGH HARDWARE TO CONVERT TWO HUBS TO ALL UFP-STYLE 1-1/4" x 1-3/4" SPINDLES 2 x PE2101 SEAL 1-3/4" UFP (21333) 2 x PH1980 SPINDLE NUT 13/16" UFP 2 x PH2012 COTTER PIN 1/8" x 1-1/4" UFP 2 x PH2066 3/4" AXLE D WASHER 3/16" UFP 2 x PH2108 SPINDLE NUT RETAINER UFP

PH2160 ~ CONVERSION KIT (5-LUG 3.5K UFP ROTORS & HUBS to NON-UFP AXLES)

REPRESENTATION PHOTO MAGIC TILT HUB/ROTOR CONVERSION KIT ~ PH2160 INCLUDES: ENOUGH HARDWARE TO CONVERT TWO 5-LUG ROTORS OR HUBS TO EITHER 1" D OR 1" ROUND SPINDLES 2 x PE2050 SEAL 1-3/8" NON-UFP (171-255) 2 x PH2014 COTTER PIN 1/8" x 1-3/4" (1" SPINDLE THREADS) 2 x PH2000 AXLE NUT 1" CASTLE NON-UFP 2 x PH2105 TANG WASHER (1" D-SPINDLES) 2 x PH2070 SPINDLE WASHER (1" D-SPINDLES) 2 x PH2060 SPINDLE WASHER (1" ROUND SPINDLES)

PH2165 ~ CONVERSION KIT (6 & 8-LUG UFP ROTORS & HUBS TO NON-UFP AXLES)

REPRESENTATION PHOTO MAGIC TILT HUB/ROTOR CONVERSION KIT ~ PH2165 INCLUDES: ENOUGH HARDWARE TO CONVERT TWO 6 OR 8-LUG ROTORS OR HUBS TO EITHER 1" D OR 1" ROUND SPINDLES 2 x PE2100 SEAL 1-3/4" NON-UFP (22333) 2 x PH2014 COTTER PIN 1/8" x 1-3/4" (1" SPINDLE THREADS) 2 x PH2000 AXLE NUT 1" CASTLE NON-UFP 2 x PH2105 TANG WASHER (1" D-SPINDLES) 2 x PH2070 SPINDLE WASHER (1" D-SPINDLES) 2 x PH2060 SPINDLE WASHER (1" ROUND SPINDLES)

PH6025

AX[V]2X2X86TR 68SC HD W/FLG [NO HUBS]

PI0602 ~ 1-AXLE FENDER PLASTIC 7" x 5-1/2" x 20-1/4" (KARAVAN 206-00039)

REPRESENTATION PHOTO MAGIC TILT SINGLE AXLE FENDER ~ PI0602 PRIMARILY USED ON KARAVAN TRAILERS WITH KNOTT TORSION AXES AND 8" AND 10" TIRES (MAY WORK IN OTHER APPLICATIONS) COMES WITH PRE-DRILLED HOLES FOR 100-07133-GL FENDER BRACKET ON KNOTT TORSION AXLES MOUNTING HARDWARE NOT INCLUDED

PI0605 ~ 1-AXLE FENDER GALVANIZED PONTOON 9-1/2" x 8" x 22" (KARAVAN 206-00012)

REPRESENTATION PHOTO MAGIC TILT FENDER ~ PI0605 PRIMARILY USED ON KARAVAN PONTOON TRAILERS WITH 20.5/65-10 TIRES CAN USE EITHER THE PV9000-1 (OLD STYLE) OR PV9000 (NEW STYLE) NON-SKID FENDER DECALS (NOT INCLUDED) MOUNTING HARDWARE NOT INCLUDED

PI0606 ~ 1-AXLE FENDER GALVANIZED PONTOON 7" x 8-1/4" x 26" (KARAVAN 206-00109)

REPRESENTATION PHOTO MAGIC TILT PONTOON FENDER ~ PI0606 CAN BE USED IN PAIRS FOR A TANDEM-AXLE APPLICATION CAN USE THE PV9000-1 NON-SKID FENDER DECAL (NOT INCLUDED) FENDER BRACKETS (NOT INCLUDED) MOUNTING HARDWARE NOT INCLUDED

PI0610 ~ 1-AXLE FENDER PLASTIC 9" x 9-1/2" x 37" (KARAVAN 206-00056)

REPRESENTATION PHOTO MAGIC TILT SINGLE AXLE FENDER ~ PI0610 SPECIAL ORDER - PLEASE ALLOW ADDITIONAL TIME INCLUDES: FRONT, REAR, AND TOP STEPS MOUNTING SLOTS FOR EASY INSTALLATION BUILT-IN FENDER SKIRT NO PUNCHOUTS FOR LIGHTS MOUNTING HARDWARE NOT INCLUDED

PI1002 ~ 1-AXLE FENDER GALVANIZED 7" x 6" x 21"

REPRESENTATION PHOTO MAGIC TILT FENDER ~ PI1002 3/8" SIDE MOUNT HOLES ON 12" CENTERS CAN BE MOUNTED WITH TWO PI0100 BRACKETS MOST COMMONLY USED WITH 8" TIRES WHILE BOLTED TO FRAME MOUNTING HARDWARE NOT INCLUDED

PJ1350 ~ DOUBLE-EYE SPRING 20"

REPRESENTATION PHOTO MAGIC TILT LEAF SPRING ~ PJ1350 # LEAF: 3 DOUBLE-EYE SPRINGS ARE MEASURED FROM THE CENTER OF THE FRONT EYE TO THE CENTER OF THE REAR EYE. INCLUDES .58" ID NYLON SPRING BUSHINGS (ALLOWS FOR GALVANIZED 1/2" BOLT) DOES NOT INCLUDE MOUNTING HARDWARE MOUNTING HARDWARE KITS HARDWARE KITS

PK1000 ~ 1-AXLE MOUNT KIT 1-EYE 1-1/2" AXLE GALVANIZED

REPRESENTATION PHOTO MAGIC TILT SINGLE AXLE MOUNT KIT ~ PK1000 Provides all necessary hardware to mount single-eye springs on one 1-1/2" square axle. FOR CORRECT U-BOLT, SELECT NUMBER OF SPRING LEAVES IN DROP-DOWN INCLUDES: 2 x PK1200 3-HOLE PLATES GALVANIZED 2 x CAPSCREW 1/2" x 3-1/2" GR 5 PLATED 2 x NUT NYLOC 1/2-13 PLATED 4 x NUT HEX 1/2-13 GALVANIZED 4 x WASHER FLAT 1/2" GALVANIZED 4 x WASHER LOCK 1/2" GALVANIZED 2 x U-BOLT 1/2" x 2-3/4" x SELECT GALVANIZED

PK1050 ~ 1-AXLE MOUNT KIT 1-EYE 2x2 AXLE GALVANIZED

REPRESENTATION PHOTO MAGIC TILT SINGLE AXLE MOUNT KIT ~ PK1050 PROVIDES ALL NECESSARY HARDWARE TO MOUNT SINGLE-EYE SPRINGS ON ONE 2" SQUARE AXLE FOR CORRECT U-BOLT, SELECT NUMBER OF SPRING LEAVES IN DROP-DOWN 3, 4, 5, 6 INCLUDES: 2 x PK1250 5-HOLE PLATES GALV 2 x CAPSCREW 1/2" x 3-1/2" GR 5 PLATED 2 x NUT NYLOCK 1/2-13 PLATED 8 x NUT HEX 1/2-13 GALV 8 x WASHER FLAT USS 1/2" GALV 8 x WASHER LOCK 1/2" GALV 4 x U-BOLT 1/2" x 2-1/16" x SELECT GALV

PK1050-1 ~ 1-AXLE MOUNT KIT 1-EYE 2x3 AXLE GALVANIZED

REPRESENTATION PHOTO MAGIC TILT SINGLE AXLE MOUNT KIT ~ PK1050-1 PROVIDES ALL NECESSARY HARDWARE TO MOUNT SINGLE-EYE SPRINGS ON ONE 2" x 3" AXLE FOR CORRECT U-BOLT, SELECT NUMBER OF SPRING LEAVES IN DROP-DOWN 3, 4, 5, 6 INCLUDES: 2 x PK1250 5-HOLE PLATES GALV 2 x CAPSCREW 1/2" x 3-1/2" GR 5 PLATED 2 x NUT NYLOCK 1/2-13 PLATED 8 x NUT HEX 1/2-13 GALV 8 x WASHER FLAT USS 1/2" GALV 8 x WASHER LOCK 1/2" GALV 4 x U-BOLT 1/2" x 2-1/16" x SELECT GALV

PK1100 ~ 1-AXLE MOUNT KIT 2-EYE 2x2 AXLE GALVANIZED

REPRESENTATION PHOTO MAGIC TILT SINGLE AXLE MOUNT KIT ~ PK1100 Provides all necessary hardware to mount double-eye springs on one 2" square axle. FOR CORRECT U-BOLT, SELECT NUMBER OF SPRING LEAVES IN DROP-DOWN 3, 4, 5, 6 INCLUDES: 2 x PK1250 5-HOLE PLATES GALV 4 x PK1300 2-HOLE SHACKLE PLATE GALV 2 x SPACER DOUBLE EYE SPRING 1-3/4" ALUM 6 x CAPSCREW 1/2" x 3-1/2" GR 5 PLATED 6 x NUT NYLOCK 1/2-13 PLATED 8 x NUT HEX 1/2-13 GALV 12 x WASHER FLAT USS 1/2" GALV 8 x WASHER LOCK 1/2" GALV 4 x U-BOLT 1/2" x 2-1/16" x SELECT GALV

PK1100-1 ~ 1-AXLE MOUNT KIT 2-EYE 2x3 AXLE GALVANIZED

REPRESENTATION PHOTO MAGIC TILT SINGLE AXLE MOUNT KIT ~ PK1100-1 Provides all necessary hardware to mount double-eye springs on one 2" x 3" square axle. FOR CORRECT U-BOLT, SELECT NUMBER OF SPRING LEAVES IN DROP-DOWN 3, 4, 5, 6 INCLUDES: 2 x PK1250 5-HOLE PLATE GALV 4 x PK1300 2-HOLE SHACKLE PLATE GALV 2 x SPACER D-EYE SPRING 1-3/4" ALUM 6 x GRADE-5 BOLT (1/2" x 3-1/2") PLATED 6 x 1/2" NYLOCK NUT PLATED 8 x 1/2" HEX NUT GALV 12 x 1/2" FLAT WASHER GALV 8 x 1/2" LOCK WASHER GALV 4 x SQUARE U-BOLT 1/2" x 2-1/16" x SELECT GALV

PK1100-SS ~ 1-AXLE MOUNT KIT 2-EYE 2x2 AXLE STAINLESS / GALV

REPRESENTATION PHOTO MAGIC TILT SINGLE AXLE MOUNT KIT ~ PK1100-SS Provides all necessary hardware to mount double-eye springs on one 2" square axle. FOR CORRECT U-BOLT, SELECT NUMBER OF SPRING LEAVES IN DROP-DOWN 3, 4, 5, 6 INCLUDES: 2 x PK1250 5-HOLE PLATES GALV 4 x PK1300 2-HOLE SHACKLE PLATE GALV 2 x SPACER DOUBLE EYE SPRING 1-3/4" ALUM 6 x CAPSCREW 1/2" x 3-1/2" GR 5 PLATED 6 x NUT NYLOCK 1/2-13 PLATED 8 x NUT HEX 1/2-13 STAINLESS 12 x WASHER FLAT USS 1/2" GALV 8 x WASHER LOCK 1/2" STAINLESS 4 x U-BOLT 1/2" x 2-1/16" x SELECT STAINLESS

PK1150 ~ 2-AXLE MOUNT KIT 2-EYE 2x2 AXLE GALVANIZED

REPRESENTATION PHOTO MAGIC TILT TANDEM AXLE MOUNT KIT ~ PK1150 Provides all necessary hardware to mount double-eye springs on two 2" square axles. SPRING TYPE DOUBLE-EYE FOR CORRECT U-BOLT, SELECT NUMBER OF SPRING LEAVES IN DROP-DOWN 3, 4, 5, 6 INCLUDES: 4 x PK1250 5-HOLE PLATES GALV 8 x PK1300 2-HOLE SHACKLE PLATE GALV 12 x CAPSCREW 1/2" x 3-1/2" GR 5 PLATED 2 x CAPSCREW 1/2" x 4" GR 5 PLATED 14 x NUT NYLOCK 1/2-13 PLATED 16 x NUT HEX 1/2-13 GALV 28 x WASHER FLAT USS 1/2" GALV 16 x WASHER LOCK 1/2" GALV 8 x U-BOLT 1/2" x 2-1/16" x SELECT GALV

PK1150-SS ~ 2-AXLE MOUNT KIT 2-EYE 2x2 AXLE STAINLESS / GALV

REPRESENTATION PHOTO MAGIC TILT TANDEM AXLE MOUNT KIT ~ PK1150-SS Provides all necessary hardware to mount double-eye springs on two 2" square axles. FOR CORRECT U-BOLT, SELECT NUMBER OF SPRING LEAVES IN DROP-DOWN 3, 4, 5, 6 INCLUDES: 4 x PK1250 5-HOLE PLATES GALV 8 x PK1300 2-HOLE SHACKLE PLATE GALV 12 x CAPSCREW 1/2" x 3-1/2" GR 5 PLATED 2 x CAPSCREW 1/2" x 4" GR 5 PLATED 14 x NUT NYLOCK 1/2-13 PLATED 16 x NUT HEX 1/2-13 STAINLESS 28 x WASHER FLAT USS 1/2" GALV 16 x WASHER LOCK 1/2" STAINLESS 8 x U-BOLT 1/2" x 2-1/16" x SELECT STAINLESS

PK1152 ~ 2-AXLE MOUNT KIT 2-EYE 2x3 AXLE GALVANIZED

REPRESENTATION PHOTO MAGIC TILT TANDEM AXLE MOUNT KIT ~ PK1152 Provides all necessary hardware to mount double-eye springs on two 2" x 3" axles. FOR CORRECT U-BOLT, SELECT NUMBER OF SPRING LEAVES IN DROP-DOWN 3, 4, 5, 6 INCLUDES: 4 x PK1250 5-HOLE PLATES GALV 8 x PK1300 2-HOLE SHACKLE PLATE GALV 12 x CAPSCREW 1/2" x 3-1/2" GR 5 PLATED 2 x CAPSCREW 1/2" x 4" GR 5 PLATED 14 x NUT NYLOCK 1/2-13 PLATED 16 x NUT HEX 1/2-13 GALV 28 x WASHER FLAT USS 1/2" GALV 16 x WASHER LOCK 1/2" GALV 8 x U-BOLT 1/2" x 2-1/16" x SELECT GALV

PK1152-SS ~ 2-AXLE MOUNT KIT 2-EYE 2x3 AXLE STAINLESS / GALV

REPRESENTATION PHOTO MAGIC TILT TANDEM AXLE MOUNT KIT ~ PK1152-SS Provides all necessary hardware to mount double-eye springs on two 2" x 3" square axles FOR CORRECT U-BOLT, SELECT NUMBER OF SPRING LEAVES IN DROP-DOWN 3, 4, 5, 6 INCLUDES: 4 x PK1250 x 5-HOLE PLATES GALV 8 x PK1300 x 2-HOLE PLATES GALV 12 x PY0260 x CAPSCREW 1/2 x 3-1/2 GR5 PLATED 2 x PY0265 x CAPSCREW 1/2 x 4 GR5 PLATED 16 x PY1025 x LOCK WASHER 1/2 STAINLESS 14 x PY1315 x NUT NYLOCK 1/2-13 PLATED 28 x PY1515 x FLAT WASHER USS 1/2 GALV 16 x PY1785 x HEX NUT 1/2" STAINLESS 16 x PY1905 x FLAT WASHER 1/2" STAINLESS 8 x PY2538 x U-BOLT SS 1/2 x 2-1/16 x SELECT GALV

PK1153 ~ 3-AXLE MOUNT KIT 2-EYE 2x3 AXLE GALVANIZED

REPRESENTATION PHOTO MAGIC TILT TRIPLE AXLE MOUNT KIT ~ PK1153 Provides all necessary hardware to mount double-eye springs on three 2" x 3" axles. FOR CORRECT U-BOLT, SELECT NUMBER OF SPRING LEAVES IN DROP-DOWN 3, 4, 5, 6 INCLUDES: 6 x PK1250 x 5-HOLE PLATES GALV 16 x PK1300 x 2-HOLE SHACKLE PLATE GALV 20 x PY0260 x CAPSCREW 1/2" x 3-1/2" GR 5 PLATED 4 x PY0265 x CAPSCREW 1/2" x 4" GR 5 PLATED 24 x PY1315 x NUT NYLOCK 1/2-13 PLATED 24 x PY1410 x NUT HEX 1/2-13 GALV 48 x PY1515 x WASHER FLAT USS 1/2" GALV 24 x PY1610 x WASHER LOCK 1/2" GALV 12 x PY2050 x U-BOLT 1/2" x 2-1/16" x SELECT GALV

PK2512 ~ 1-AXLE UNDERCARRIAGE 38" 2-EYE INSIDE MOUNT

REPRESENTATION PHOTO SPECIAL ORDER. PLEASE ALLOW ADDITIONAL TIME. MAGIC TILT UNDERCARRIAGE ~ PK2512 WILL WORK ON EITHER LEFT OR RIGHT SIDE 31" BETWEEN STEP MOUNTS USED ON ALUMINUM FRAME TRAILERS HOLE SIZE FOR MOUNTING TO FRAME: 1/2" ON 4-1/4" CENTERS BOLT PATTERN FOR MOUNTING TO FRAME MAY NOT MATCH EXISTING UNDERCARRIAGE AXLE & SPRING-TO-UNDERCARRIAGE HARDWARE KITS: 2x2 AXLES: GALVANIZED PK1100 , STAINLESS/GALV PK1100-SS 2x3 AXLES: GALVANIZED PK1100-1

PK2513 ~ 1-AXLE UNDERCARRIAGE 38" 2-EYE OUTSIDE MOUNT

REPRESENTATION PHOTO MAGIC TILT UNDERCARRIAGE ~ PK2513 WILL WORK ON EITHER LEFT OR RIGHT SIDES 31" BETWEEN STEP MOUNTS USED ON ALUMINUM FRAME TRAILERS HOLE SIZE FOR MOUNTING TO FRAME: 1/2" BOLT PATTERN FOR MOUNTING TO FRAME MAY NOT MATCH EXISTING UNDERCARRIAGE AXLE & SPRING-TO-UNDERCARRIAGE HARDWARE KITS: 2x2 AXLES: GALVANIZED PK1100 , STAINLESS/GALV PK1100-SS 2x3 AXLES: GALVANIZED PK1100-1

PK2550 ~ 2-AXLE UNDERCARRIAGE 63-1/2" NO STEPS

REPRESENTATION PHOTO MAGIC TILT UNDERCARRIAGE ~ PK2550 NO STEPS, FENDER BRACKETS, FRAME MOUNT HOLES USES TWO U-BOLTS TO GO AROUND TUBE OR C-CHANNEL FRAMES (NOT INCLUDED) BOTTOM CAN BE DRILLED TO BOLT DIRECTLY UNDER AN I-BEAM FRAME AXLE & SPRING-TO-UNDERCARRIAGE HARDWARE KITS: 2x2 AXLES: GALVANIZED PK1150 , STAINLESS/GALV PK1150-SS 2x3 AXLES: GALVANIZED PK1152 , STAINLESS/GALV PK1152-SS

PK2655 ~ 2-AXLE UNDERCARRIAGE 71" 68" FENDERS FOR ALUMINUM STEPS

Magic Tilt Undercarriage ~ PK2655 Good to know: Primarily used on aluminum i-beam trailers Hole size for mounting to frame: 1/2" On 4-1/4" Centers Bolt pattern for mounting to frame may not match existing undercarriage Axle & Spring-to-undercarriage hardware kits: 2x2 Axles: Galvanized PK1150 , Stainless/Galv PK1150-SS 2x3 Axles: Galvanized PK1152 , Stainless/Galv PK1152-SS

PK2658 ~ 2-AXLE UNDERCARRIAGE 71" 60" FENDERS FOR ALUMINUM STEPS

REPRESENTATION PHOTO MAGIC TILT UNDERCARRIAGE ~ PK2658 PRIMARILY USED ON ALUMINUM I-BEAM TRAILERS FOR PONTOON BOATS HOLE SIZE FOR MOUNTING TO FRAME: 1/2" ON 4-1/4" CENTERS BOLT PATTERN FOR MOUNTING TO FRAME MAY NOT MATCH EXISTING UNDERCARRIAGE AXLE & SPRING-TO-UNDERCARRIAGE HARDWARE KITS: 2x2 AXLES: GALVANIZED PK1150 , STAINLESS/GALV PK1150-SS 2x3 AXLES: GALVANIZED PK1152 , STAINLESS/GALV PK1152-SS

PK2705 ~ 2-AXLE UNDERCARRIAGE 78" WITH STEPS

REPRESENTATION PHOTO MAGIC TILT UNDERCARRIAGE ~ PK2705 NO FRAME MOUNTING HOLES PRIMARILY USED ON GALVANIZED TRAILERS USES TWO U-BOLTS TO GO AROUND TUBE OR C-CHANNEL FRAMES (NOT INCLUDED) AXLE & SPRING-TO-UNDERCARRIAGE HARDWARE KITS: 2x2 AXLES: GALVANIZED PK1150 , STAINLESS/GALV PK1150-SS 2x3 AXLES: GALVANIZED PK1152 , STAINLESS/GALV PK1152-SS

PK2770 ~ 3-AXLE UNDERCARRIAGE 112" WITH STEPS

REPRESENTATION PHOTO (PLEASE CALL 941-358-1117 FOR SHIPPING QUOTE) MAGIC TILT UNDERCARRIAGE ~ PK2770 NO FRAME MOUNTING HOLES USED ON ALUMINUM AND GALVANIZED TRAILERS USES U-BOLTS TO GO AROUND TUBE OR C-CHANNEL FRAMES (NOT INCLUDED) AXLE & SPRING-TO-UNDERCARRIAGE HARDWARE KIT: PK1153

PK2775 ~ 3-AXLE UNDERCARRIAGE 120" WITH STEPS

REPRESENTATION PHOTO (PLEASE CALL 941-358-1117 FOR SHIPPING QUOTE) MAGIC TILT UNDERCARRIAGE ~ PK2775 USED ON ALUMINUM AND GALVANIZED TRAILERS USES U-BOLTS TO GO AROUND TUBE OR C-CHANNEL FRAMES (NOT INCLUDED) AXLE & SPRING-TO-UNDERCARRIAGE HARDWARE KIT: PK1153

Plastic Fenders for Single Axle Trailers

FENDER 15" W/STEPS GRAY

Single Eye Spring

8 sizes available

SPINDLE NUT

AXLE NUT 3/4" ID

Spindles

2 sizes available

Spring Tabs

3 sizes available

Undercarriage Angles for Tandem Axle

4 sizes available