PG1030 COMPLETE 5-LUG DISC BRAKE KIT ≤7.5K TOP-MOUNT (DEXTER / UFP)

Specifications

• Shipping Weight85 lbs
• TYPECOMPLETE DISC BRAKE
• DIAMETER10"
• BOLT PATTERN5 x 4.5"
• CAPACITYUP TO 7,500 LBS.
• SPINDLE1-1/16" x 1-3/8"
• TONGUE SIZE3x3, 3x4, 3x5
• FINISHE-COAT
• BRANDDEXTER / UFP
• APPLICATIONONE OR TWO 3,500-POUND (5-LUG) AXLE TRAILERS
• REPRESENTATION PHOTO
• IF YOU WANT TO ADD BRAKES TO A TRAILER THAT WAS NEVER EQUIPPED WITH THEM, MAKE SURE THERE IS AT LEAST FOUR-INCHES OF CLEARANCE FROM THE BRAKE MOUNTING PLATE ON THE AXLE OR TORSION ARM TO THE OUTSIDE EDGE OF THE FRAME.
• MAGIC TILT BRAKE KIT ~ PG1030
• NEW HOLES WILL NEED TO BE DRILLED IN THE TRAILER TONGUE.
• COMES WITH PG4856 DOUBLE BANJO FITTING TO CONNECT BRAKE LINES.
• UFP SPINDLE MOUNTING HARDWARE (NOT INCLUDED): PH2125
• INCLUDES:
• 2 x BEARING 1-1/16" (44649)
• 2 x BEARING 1-3/8" (68149)
• 2 x SEAL 1-3/8" UFP (257-168)
• 1 x BEARING PROTECTOR SET SS 1.980
• 1 x PG1072 ACTUATOR TOP MOUNT DISC DEMCO #7,000
• 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 8'
• 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 23'
• 2 x PG2026-1 DISC ROTOR AND HUB 10" 5-LUG UFP
• 1 x CALIPER FITTING PLUG UFP #32212
• 1 x PG5003 DISC BRAKE CALIPER ASSEMBLY LH UFP DB3 (DOUBLE BANJO FITTING)
• 1 x PG5005 DISC BRAKE CALIPER ASSEMBLY RH UFP DB3 (DOUBLE BANJO FITTING)
• 4 x 7/16" x 1" SHCS BOLT UFP DISC CALIPER
• 1 x PL2128 5-WAY FULL GROUND WIRE HARNESS 30'
• 6 x PLASTIC WIRE TIE HD 14-1/2"
• 2 x 1/4" CHAIN W/ ONE HOOK 40"
• 3 x CAPSCREW PLATED NC 1/2 x 4-1/2 GR5
• 3 x NUT LOCK NI 1/2-13 PLATED
• OWNERS MANUAL