Search Results

219-00055-NA ~ SINGLE-EYE HOOK SPRING 27-1/2" KARAVAN

REPRESENTATION PHOTO MAGIC TILT LEAF SPRING ~ 219-00055-NA SINGLE-EYE HOOK SPRINGS ARE MEASURED FROM THE CENTER OF THE FRONT EYE TO THE END OF THE HOOK. INCLUDES .58" ID NYLON SPRING BUSHINGS (ALLOWS FOR GALVANIZED 1/2" BOLT) DOES NOT INCLUDE MOUNTING HARDWARE MOUNTING HARDWARE KITS HARDWARE KITS SPRING EYE BOLT PK1450

3" CHANNEL U-BOLT KIT (Minimum Order of 20 Each)

1 - 7/16X3-1/16X2-13/16 Ubolt, 2- 7/16 Lock Washers, and 2- 7/16 Nut

6Lug Hub Assemblies (Copy)

HUB KIT ASSY, GREASED

Bearing Kits & Conversion Kits

HD 1-3/4"X1-1/4" UFP

Kit Includes: Part Description Qty PE1550 BEARING HD 1-1/4" [15123] 1 PE1600 BEARING 1-3/4" [25580] 1 PE1850 RACE-HD 1-1/4" [15245] 1 PE1900 RACE 1-3/4" [25520] 1 PE2101 SEAL 1-3/4"[UFP][21333] 1 PH2012 COTTER PIN 1/8"X1-1/4"[UFP AXLE] 1

Bow Board Kits

BOW SUPPORT ALS TO 24'

Bow Board Kits

BOW SUPPORT ALS 26'

Brake Line Kits for Single Axle

6 sizes available

1- HYD. BRAKE HOSE W/SWIVEL 19' 1- HYD.BRAKE/BRASS T-FITTING 1- HYD. BRAKE HOSE W/SWIVEL 1' 1- HYD. BRAKE HOSE W/SWIVEL 6'6" 10 - PLASTIC WIRE TIE HD 14-1/2""

Clamp-On Sockets

CLAMP ON H.W.KIT FOR 2X2 TUBE

COTTER PINS

COTTER PIN 1/8"X1-1/4"[UFP AXLE]

Coupler Repair Kit

COUPLER REPAIR KIT 2" D&L

DISC BRAKE ROTOR KIT 12" 6L [NO CAL] EA.

UFP

Dust Caps

4 sizes available

PD1300 ~ 4-LUG HUB ASSEMBLY 1-1/16"

REPRESENTATION PHOTO MAGIC TILT HUB KIT ASSEMBLY ~ PD1300 INCLUDES: 1 x HUB W/ RACE-DACRO 1-1/16" 4-LUG 4 x LUG NUT 13/16" 2 x BEARING 1-1/16" (44649) 1 x SEAL 1-1/16" (198-125) 1 x DUST CAP (1.980) 1 x COTTER PIN 1/8" x 1-3/4" PLATED DO YOU NEED BEARING PROTECTORS AND BRAS? (NOT INCLUDED) PF1054 BEARING PROTECTOR PF1060 BRA

PD1360 ~ 4-LUG HUB WITH RACE 1-1/16" COATED

REPRESENTATION PHOTO MAGIC TILT HUB WITH RACE ~ PD1360 INCLUDES RACES ALREADY INSTALLED NOT INCLUDED BEARING KIT PE1100 BEARING PROTECTOR PF1054 AND BRA PF1060

PD1600 ~ 5-LUG HUB ASSEMBLY 1-1/16" BEARINGS 1.38" ID SEAL GREASED (UFP)

REPRESENTATION PHOTO MAGIC TILT KUB KIT ASSEMBLY ~ PD1600 INCLUDES: 1 x HUB ZINC W/ RACES 5-LUG 5 x LUG NUT 13/16" 2 x BEARING 1-1/16" (44649) 1 x SEAL 1-1/16" UFP (198-138) 1 x DUST CAP 1" (1.980) 1 x COTTER PIN 1/8" x 1-3/4" PLATED DO YOU NEED? (NOT INCLUDED) PF1054 BEARING PROTECTOR PF1060 BRA

PD1602-L ~ 5-LUG HUB ASSEMBLY 1-1/16" BEARINGS 1.25" ID SEAL GREASED (UFP & NON-UFP)

REPRESENTATION PHOTO MAGIC TILT PRE-GREASED HUB ASSEMBLY ~ PD1602-L APPLICATION: ALL 1-1/2" x 1-1/2" AXLES USING 1-1/16" BEARINGS AND 1.25" ID SEAL (UFP AND NON-UFP) ALL 2" x 2" 1,500 TO 2,500-POUND UFP AXLES FROM 2022 ON COMES PRE-GREASED AND ASSEMBLED - READY TO USE IF YOU HAVE A 2" x 2" UFP AXLE THAT USES 1-1/16" BEARINGS A 1.38" ID SEAL, USE PD1600 HUB KIT. INCLUDES: 1 x PD1670 GALV HUB 5 x PD2250 LUG NUT 1/2" 2 x PE1400 BEARING 1-1/16" (44649) (INSTALLED) 2 x PE1710 RACE (44610) (INSTALLED) 1 x PE2010 SEAL 1.98" OD x 1.25" ID (INSTALLED) 1 x PE2301 POSI-LUBE DUST CAP 1.98" 1 x PE2311 POSI-LUBE RUBBER PLUG 1 x PH2014 COTTER PIN 1/8" x 1-3/4" PLATED DO YOU NEED? (NOT INCLUDED) PF1054 BEARING PROTECTOR PF1060 BRA

PD1670 ~ 5-LUG HUB WITH RACE 1-1/16" GALVANIZED

REPRESENTATION PHOTO MAGIC TILT HUB W/ RACE ~ PD1670 INCLUDES RACES ALREADY INSTALLED NOT INCLUDED BEARING PROTECTOR PF1054 AND BRA PF1060

PD1700-L ~ 5-LUG HUB ASSEMBLY 1-1/16"x1-3/8" GREASED (UFP)

Magic Tilt Pre-Greased Hub Assembly ~ PD1700-L Any Axle Using 1-1/16" x 1-3/8" Bearings and a seal with 1.68" ID Included in this kit: 1 x PD1760 Galv Hub 5 x PD2250 Lug Nut 1/2" 1 x PE1400 Bearing 1-1/16" (44649) (Installed) 1 x PE1450 Bearing 1-3/8" (68149) (Installed) 1 x PE1710 Race (44610) (Installed) 1 x PE1750 Race (68111) (Installed) 1 x PE2055 Seal 2.561" OD x 1.687" ID (Installed) 1 x PE2301 Posi-Lube Dust Cap 1.98" 1 x PE2311 Posi-Lube Rubber Plug 1 x PH2012 Cotter Pin 1/8" x 1-1/4" Plated Good to know: Comes pre-greased and assembled - ready to use Need? (sold separately) PF1054 Bearing Protector PF1060 Bra

PD1702-L-100 ~ 5-LUG HUB ASSEMBLY 1-1/16"x1-3/8" GREASED (NON UFP)

PALLET OF 100

PD1760 ~ 5-LUG HUB WITH RACE 1-1/16" x 1-3/8" GALVANIZED

REPRESENTATION PHOTO MAGIC TILT HUB W/ RACE ~ PD1760 INCLUDES RACES ALREADY INSTALLED NOT INCLUDED BEARING KIT PE1152 (UFP), PE1150 (NON-UFP) BEARING PROTECTOR PF1054 AND BRA PF1060

PD1857 ~ 6-LUG HUB WITH RACE 1-1/4" x 1-3/4" GALVANIZED

REPRESENTATION PHOTO MAGIC TILT HUB WITH RACE ~ PD1857 INCLUDES RACES ALREADY INSTALLED NOT INCLUDED USE BEARING KITS PE1201 (UFP AXLES) OR PE1250 (NON-UFP AXLES) BEARING PROTECTOR PF1101 AND BRA PF1063

PD1860 ~ 8-LUG HUB WITH RACES 1-1/4" x 1-3/4" GALVANIZED

REPRESENTATION PHOTO MAGIC TILT HUB WITH RACE ~ PA1860 INCLUDES RACES ALREADY INSTALLED NOT INCLUDED USE BEARING KITS PE1256 (UFP), PE1255 (NON-UFP) BEARING PROTECTOR PF1103 AND BRA PF1063

PE1100 ~ BEARING KIT 1-1/16" x 1-1/16" (NON-UFP)

REPRESENTATION PHOTO MAGIC TILT BEARING KIT ~ PE1100 USE WITH HUBS PD1360 , PD1670 , PD1660 INCLUDES: 2 x PE1400 BEARING 1-1/16" (44649) 2 x PE1710 RACE 1" OR 1-1/16" (44610) 1 x PE2010 SEAL 1-1/16" (198-125) 1 x PH2014 COTTER PIN 1/8" x 1-3/4" PLATED

PE1101 ~ BEARING KIT 1-1/16 x 1-1/16" (UFP)

REPRESENTATION PHOTO MAGIC TILT BEARING KIT ~ PE1101 USE WITH HUBS PD1670 , PD1660 INCLUDES: 2 x PE1400 BEARING 1-1/16" (44649) 2 x PE1710 RACE 1" OR 1-1/16" (44610) 1 x PE2015 SEAL 1-1/16" UFP (198-138) 1 x PH2012 COTTER PIN 1/8" x 1-1/4" UFP PLATED

PE1150 ~ BEARING KIT 1-1/16" x 1-3/8" (NON-UFP)

REPRESENTATION PHOTO MAGIC TILT BEARING KIT ~ PE1150 USE WITH HUBS PD1750 , PD1760 INCLUDES: 1 x PE1400 BEARING 1-1/16" (44649) 1 x PE1450 BEARING 1-3/8" (68149) 1 x PE1710 RACE 1" OR 1-1/16" (44610) 1 x PE1750 RACE 1-3/8" UCF (68111) 1 x PE2050 SEAL 1-3/8" (255-171) 1 x PH2014 COTTER PIN 1/8" x 1-3/4" PLATED

PE1151 ~ BEARING KIT 1-1/16" x 1-3/8" (UFP)

Magic Tilt Bearing Kit ~ PE1151 Good to know: Use with rotor/hub combinations PG2026-1 , PG2026-2, PG2024 Inner Race (PE1749) Used Exclusively In 5-Lug UFP 1-Piece Disk Brake Rotors Kit Contains: 1 x PE1400 Bearing 1-1/16" (44649) 1 x PE1450 Bearing 1-3/8" (68149) 1 x PE1710 Race 1" Or 1-1/16" (44610) 1 x PE1749 Race 1-3/8" UFP (68110) 1 x PE2055 Seal 1-3/8" UFP (257-168) 1 x PH2012 Cotter Pin 1/8" x 1-1/4" UFP

PE1152 ~ BEARING KIT 1-1/16" x 1-3/8" (UFP)

REPRESENTATION PHOTO MAGIC TILT BEARING KIT ~ PE1152 USE WITH HUBS PD1750 , PD1760 INCLUDES: 1 x PE1400 BEARING 1-1/16" (44649) 1 x PE1450 BEARING 1-3/8" (68149) 1 x PE1710 RACE 1" OR 1-1/16" (44610) 1 x PE1750 RACE 1-3/8" UCF (68111) 1 x PE2055 SEAL 1-3/8" UFP (257-168) 1 x PH2012 COTTER PIN 1/8" x 1-1/4" UFP

PE1200 ~ BEARING KIT 1-1/4" x 1-3/4" SELECT 6-LUG UFP HUBS/ROTORS

REPRESENTATION PHOTO MAGIC TILT BEARING KIT ~ PE1200 APPLICATION: - USE ROTORS PG2027-1 & PG2027-2 PRIOR TO 3/24 WITH 2.328" DUST CAPS - 5,200-POUND UFP AXLES (2"x3" SPRING AND 3-1/2" TORSION) USING SEAL WITH 2.13" INSIDE DIAMETER INCLUDES: 1 x PE1500 1-1/4" BEARING (67048) 1 x PE1600 1-3/4" BEARING (25580) 1 x PE1800 RACE (67010) 1 x PE1900 RACE (25520) 1 x PE2101 SEAL (21333) 1 x PH2012 1/8" x 1-1/4" COTTER PIN

PE1201 ~ BEARING KIT 1-1/4" x 1-3/4" SELECT 6-LUG UFP HUBS/ROTORS

REPRESENTATION PHOTO MAGIC TILT BEARING KIT ~ PE1201 APPLICATION: - USE WITH HUB PD1857 , ROTORS PG2027-1 & PG2027-2 (AFTER 3/24 WITH 2.44" DUST CAPS) ON UFP AXLES - 5,200-POUND UFP AXLES (2"x3" SPRING AND 3-1/2" TORSION) USING 2.13" INSIDE DIAMETER SEALS - SELECT 6-LUG NON-UFP HUBS (D-MAX, KODIAK, DRUM) ON UFP AXLES USING 2.13" INSIDE DIAMETER SEALS INCLUDES: 1 x PE1550 1-1/4" BEARING (15123) 1 x PE1600 1-3/4" BEARING (25580) 1 x PE1850 RACE (15245) 1 x PE1900 RACE (25520) 1 x PE2101 SEAL (21333) 1 x PH2012 1/8" x 1-1/4" COTTER PIN

PE1250 ~ BEARING KIT 1-1/4" x 1-3/4" SELECT 6-LUG NON-UFP HUBS/ROTORS

REPRESENTATION PHOTO MAGIC TILT BEARING KIT ~ PE1250 APPLICATION: - USE WITH HUB PD1857 AND ROTORS PG2027-1 & PG2027-2 (AFTER 3/24 WITH 2.44" DUST CAPS) ON NON-UFP AXLES - 5,200-POUND NON-UFP AXLES (2"x3" SPRING AND 3-1/2" TORSION) USING SEAL WITH 2.23" INSIDE DIAMETER - SELECT 6-LUG NON-UFP HUBS (D-MAX, KODIAK, DRUM) ON NON-UFP AXLES ON AXLES USING A SEAL WITH 2.23" INSIDE DIAMETER INCLUDES: 1 x PE1550 BEARING HD 1-1/4" (15123) 1 x PE1600 BEARING 1-3/4" (25580) 1 x PE1850 RACE HD 1-1/4" (15245) 1 x PE1900 RACE 1-3/4" (25520) 1 x PE2100 SEAL 1-3/4" (22333) 1 x PH2014 COTTER PIN 1/8" x 1-3/4" PLATED

PE1255 ~ BEARING KIT 1-1/4" x 1-3/4" 8-LUG NON-UFP HUBS

REPRESENTATION PHOTO MAGIC TILT BEARING KIT ~ PE1255 USE WITH 8-LUG HUB PD1860 OR ROTORS PG2028-1 AND PG2028-2 ON NON-UFP AXLES INCLUDES: 1 x PE1555 BEARING 1-1/4" (14125A) 1 x PE1600 BEARING 1-3/4" (25580) 1 x PE1855 RACE 1-1/4" 8-LUG (14276) 1 x PE1900 RACE 1-3/4" (25520) 1 x PE2100 SEAL 1-3/4" (22333) 1 x PH2014 COTTER PIN 1/8" x 1-3/4" PLATED

PE1256 ~ BEARING KIT 1-1/4" x 1-3/4" 8-LUG UFP HUBS

REPRESENTATION PHOTO MAGIC TILT BEARING KIT ~ PE1256 USE WITH 8-LUG HUB PD1860 OR ROTORS PG2028-1 AND PG2028-2 ON UFP AXLES INCLUDES: 1 x PE1555 BEARING 1-1/4" (14125A) 1 x PE1600 BEARING 1-3/4" (25580) 1 x PE1855 RACE 1-1/4" 8-LUG (14276) 1 x PE1900 RACE 1-3/4" (25520) 1 x PE2101 UFP SEAL 1-3/4" (21333) 1 x PH2012 x COTTER PIN 1/8" x 1-1/4" (UFP AXLE)

PE1400 ~ BEARING 1-1/16" (44649)

REPRESENTATION PHOTO MAGIC TILT BEARING ~ PE1400 SOLD INDIVIDUALLY

PE1450 ~ BEARING 1-3/8" (68149)

REPRESENTATION PHOTO MAGIC TILT BEARING ~ PE1450 SOLD INDIVIDUALLY

PE1500 ~ BEARING 1-1/4" (67048)

REPRESENTATION PHOTO MAGIC TILT BEARING ~ PE1500 SOLD INDIVIDUALLY

PE1550 ~ BEARING 1-1/4" (15123)

REPRESENTATION PHOTO MAGIC TILT H.D. BEARING ~ PE1550 SOLD INDIVIDUALLY

PE1555 ~ BEARING 1-1/4" (14125A)

REPRESENTATION PHOTO MAGIC TILT BEARING ~ PE1555 SOLD INDIVIDUALLY FOR 8 LUG HUBS

PE1600 ~ BEARING 1-3/4" (25580)

REPRESENTATION PHOTO MAGIC TILT BEARING ~ PE1600 SOLD INDIVIDUALLY

PE1710 ~ RACE 1-1/16" (44610)

REPRESENTATION PHOTO MAGIC TILT RACE ~ PE1710 SOLD INDIVIDUALLY

PE1749 ~ RACE 1-3/8" (68110)

REPRESENTATION PHOTO MAGIC TILT RACE ~ PE1749 SOLD INDIVIDUALLY

PE1750 ~ RACE 1-3/8" (68111)

REPRESENTATION PHOTO MAGIC TILT RACE ~ PE1750 SOLD INDIVIDUALLY

PE1800 ~ RACE 1-1/4" (67010)

REPRESENTATION PHOTO MAGIC TILT RACE ~ PE1800 SOLD INDIVIDUALLY

PE1850 ~ RACE 1-1/4" (15245)

REPRESENTATION PHOTO MAGIC TILT H.D. RACE ~ PE1850 SOLD INDIVIDUALLY FOR 6 LUG HEAVY DUTY NON-UFP HUBS

PE1855 ~ RACE 1-1/4" (14276)

REPRESENTATION PHOTO MAGIC TILT RACE ~ PE1855 SOLD INDIVIDUALLY FOR 8 LUG HUBS

PE1900 ~ RACE 1-3/4" (25520)

REPRESENTATION PHOTO MAGIC TILT RACE ~ PE1900 SOLD INDIVIDUALLY

PE2010 ~ SEAL 1-1/16" SPINDLES NON-UFP, UFP AFTER 2019 (125-198)

REPRESENTATION PHOTO MAGIC TILT GREASE SEAL ~ PE2010 SOLD INDIVIDUALLY APPLICATION: USED ON NON-UFP 1,500 TO 2,500 POUND AXLES WITH 1-1/6" X 1-1/16" SPINDLES USED ON UFP 1,500 TO 2,500 POUND AXLES WITH 1-1/6" X 1-1/16" SPINDLES AFTER 2019 FOR UFP 1,500 TO 2,500 POUND AXLES PRIOR TO 2020, USE SEAL PE2015

PE2015 ~ SEAL 1-1/16" SPINDLES UFP BEFORE 2020 (138-198)

REPRESENTATION PHOTO MAGIC TILT GREASE SEAL ~ PE2015 SOLD INDIVIDUALLY UFP 2", 2.5K AXLES BUILT AFTER MID 2019 USE THE PE2010 SEAL WITH 1.25" INSIDE DIAMETER. MEASURE THE SPINDLE SURFACE FOR THE SEAL BEFORE ORDERING.

PE2050 ~ SEAL 1-3/8" NON-UFP (171-255)

REPRESENTATION PHOTO MAGIC TILT GREASE SEAL ~ PE2050 SOLD INDIVIDUALLY

PE2055 ~ SEAL 1-3/8" UFP (168-257)

REPRESENTATION PHOTO MAGIC TILT GREASE SEAL ~ PE2055 SOLD INDIVIDUALLY

PE2100 ~ SEAL 1-3/4" NON-UFP (22333)

REPRESENTATION PHOTO MAGIC TILT GREASE SEAL ~ PE2100 SOLD INDIVIDUALLY FOR USE ON 4 x 4 TORSION AXLES

PE2101 ~ SEAL 1-3/4" UFP (21333)

REPRESENTATION PHOTO MAGIC TILT GREASE SEAL ~ PE2101 SOLD INDIVIDUALLY

PE2311 ~ CENTER HOLE CAP RUBBER PLUG (POSI-LUBE)

REPRESENTATION PHOTO MAGIC TILT RUBBER PLUG FOR POSI-LUBE DUST CAPS ~ PE2311 SOLD INDIVIDUALLY FITS ALL MODERN POSI-LUBE DUST CAPS OLDER POSI-LUBE DUST CAPS FOR 6 AND 8-LUG HUBS ONCE USED A LARGER PLUG. ALL NEWER DUST CAPS USE THIS UNIVERSAL PLUG.

PG1030 COMPLETE 5-LUG DISC BRAKE KIT ≤7.5K TOP-MOUNT (DEXTER / UFP)

REPRESENTATION PHOTO IF YOU WANT TO ADD BRAKES TO A TRAILER THAT WAS NEVER EQUIPPED WITH THEM, MAKE SURE THERE IS AT LEAST FOUR-INCHES OF CLEARANCE FROM THE BRAKE MOUNTING PLATE ON THE AXLE OR TORSION ARM TO THE OUTSIDE EDGE OF THE FRAME. MAGIC TILT BRAKE KIT ~ PG1030 NEW TOP-MOUNT ACTUATOR REPLACES THE PG1088 INLINE 3-HOLE ACTUATOR ON 3" TALL TONGUES. NEW HOLES WILL NEED TO BE DRILLED IN THE TRAILER TONGUE. COMES WITH PG4856 DOUBLE BANJO FITTING TO CONNECT BRAKE LINES. UFP SPINDLE MOUNTING HARDWARE (NOT INCLUDED): PH2125 IF USING ON NON-UFP AXLES WITH 1" SPINDLE THREADS YOU WILL NEED THE PH2160 CONVERSION KIT (NOT INCLUDED). ADDITIONAL AXLE(S) BRAKE KIT PG1040 (NOT INCLUDED) INCLUDES: 2 x BEARING 1-1/16" (44649) 2 x BEARING 1-3/8" (68149) 2 x SEAL 1-3/8" UFP (257-168) 1 x BEARING PROTECTOR SET SS 1.980 1 x PG1072 ACTUATOR TOP MOUNT DISC DEMCO #7,000 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 8' 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 23' 2 x PG2026-1 DISC ROTOR AND HUB 10" 5-LUG UFP 1 x CALIPER FITTING PLUG UFP #32212 1 x PG5003 DISC BRAKE CALIPER ASSEMBLY LH UFP DB3 (DOUBLE BANJO FITTING) 1 x PG5005 DISC BRAKE CALIPER ASSEMBLY RH UFP DB3 (DOUBLE BANJO FITTING) 4 x 7/16" x 1" SHCS BOLT UFP DISC CALIPER 1 x PL2128 5-WAY FULL GROUND WIRE HARNESS 30' 6 x PLASTIC WIRE TIE HD 14-1/2" 2 x 1/4" CHAIN W/ ONE HOOK 40" 3 x CAPSCREW PLATED NC 1/2 x 4-1/2 GR5 3 x NUT LOCK NI 1/2-13 PLATED OWNERS MANUAL

PG1031 COMPLETE 5-LUG DISC BRAKE KIT ≤7.5K IN-LINE (DEXTER / UFP)

REPRESENTATION PHOTO IF YOU WANT TO ADD BRAKES TO A TRAILER THAT WAS NEVER EQUIPPED WITH THEM, MAKE SURE THERE IS AT LEAST FOUR-INCHES OF CLEARANCE FROM THE BRAKE MOUNTING PLATE ON THE AXLE OR TORSION ARM TO THE OUTSIDE EDGE OF THE FRAME. MAGIC TILT BRAKE KIT ~ PG1031 COMES WITH PG4856 DOUBLE BANJO FITTING TO CONNECT BRAKE LINES. IF USING ON NON-UFP AXLES WITH 1" SPINDLE THREADS YOU WILL NEED THE PH2160 CONVERSION KIT (NOT INCLUDED) UFP SPINDLE MOUNTING HARDWARE (NOT INCLUDED): PH2125 ADDITIONAL AXLE(S) BRAKE KIT PG1040 (NOT INCLUDED) INCLUDES: 2 x BEARING 1-1/16" (44649) 2 x BEARING 1-3/8" (68149) 2 x SEAL 1-3/8" UFP (257-168) 1 x BEARING PROTECTOR SET SS 1.980 1 x PG1090 ACTUATOR IN-LINE DISC UFP #7500 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 8' 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 23' 2 x PG2026-1 DISC ROTOR AND HUB 10" 5-LUG UFP 1 x CALIPER FITTING PLUG UFP #32212 1 x PG5003 DISC BRAKE CALIPER ASSEMBLY LH UFP DB3 (DOUBLE BANJO FITTING) 1 x PG5005 DISC BRAKE CALIPER ASSEMBLY RH UFP DB3 (DOUBLE BANJO FITTING) 4 x 7/16" x 1" SHCS BOLT UFP DISC CALIPER 1 x PL2128 5-WAY FULL GROUND WIRE HARNESS 30' 6 x PLASTIC WIRE TIE HD 14-1/2" 2 x 1/4" CHAIN W/ ONE HOOK 40" 4 x CAPSCREW PLATED NC 1/2 x 4-1/2 GR5 4 x NUT LOCK NI 1/2-13 PLATED OWNERS MANUAL

PG1033 COMPLETE 5-LUG DISC BRAKE KIT 7.5K TO 16K (DEXTER / UFP)

REPRESENTATION PHOTO IF YOU WANT TO ADD BRAKES TO A TRAILER THAT WAS NEVER EQUIPPED WITH THEM, MAKE SURE THERE IS AT LEAST FOUR-INCHES OF CLEARANCE FROM THE BRAKE MOUNTING PLATE ON THE AXLE OR TORSION ARM TO THE OUTSIDE EDGE OF THE FRAME. MAGIC TILT BRAKE KIT ~ PG1033 COMES WITH PG4856 DOUBLE BANJO FITTING TO CONNECT BRAKE LINES. UFP SPINDLE MOUNTING HARDWARE (NOT INCLUDED): PH2125 IF USING ON NON-UFP AXLES WITH 1" SPINDLE THREADS YOU WILL NEED THE PH2160 CONVERSION KIT (NOT INCLUDED) ADDITIONAL AXLE(S) BRAKE KIT PG1040 (NOT INCLUDED) INCLUDES: 2 x BEARING 1-1/16" (44649) 2 x BEARING 1-3/8" (68149) 2 x SEAL 1-3/8" UFP (257-168) 2 x BEARING PROTECTOR 1.980 STAINLESS 1 x PG1095 ACTUATOR IN-LINE DISC #16,000 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 8' 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 23' 2 x PG2026-1 DISC ROTOR AND HUB 10" 5-LUG UFP 1 x CALIPER FITTING PLUG UFP #32212 1 x PG5003 DISC BRAKE CALIPER ASSEMBLY LH UFP (DOUBLE BANJO FITTING) 1 x PG5005 DISC BRAKE CALIPER ASSEMBLY RH UFP (DOUBLE BANJO FITTING) 4 x 7/16" x 1" CALIPER BOLT UFP 1 x PL2128 5-WAY HARNESS 30' 6 x PLASTIC WIRE TIE HD 14-1/2" 2 x 1/4" CHAIN W/ ONE HOOK 40" 4 x CAPSCREW PLATED NC 1/2 x 4-1/2 GR5 4 x NUT LOCK NI 1/2-13 PLATED OWNERS MANUAL

PG1037 COMPLETE 6-LUG DISC BRAKE KIT 10K TO 16K (DEXTER / UFP)

REPRESENTATION PHOTO IF YOU WANT TO ADD BRAKES TO A TRAILER THAT WAS NEVER EQUIPPED WITH THEM, MAKE SURE THERE IS AT LEAST FOUR-INCHES OF CLEARANCE FROM THE BRAKE MOUNTING PLATE ON THE AXLE OR TORSION ARM TO THE OUTSIDE EDGE OF THE FRAME. MAGIC TILT BRAKE KIT ~ PG1037 COMES WITH PG4856 DOUBLE BANJO FITTING TO CONNECT BRAKE LINES. UFP SPINDLE MOUNTING HARDWARE (NOT INCLUDED): PH2130 IF USING ON NON-UFP AXLES WITH 1" SPINDLE THREADS YOU WILL NEED THE PH2165 CONVERSION KIT (NOT INCLUDED) ADDITIONAL AXLE(S) BRAKE KIT PG1042 (NOT INCLUDED) INCLUDES: 2 x BEARING 1-1/4" UFP 2 x BEARING 1-3/4" UFP (25580) 2 x SEAL 1-3/4" UFP (21333) 2 x PF1101 STAINLESS BEARING PROTECTOR 2.441" 1 x PG1095 ACTUATOR DISC UFP #16,000 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 8' 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 23' 2 x PG2027-1 DISC ROTOR AND HUB 12" 6-LUG UFP 1 x CALIPER FITTING PLUG UFP #32212 1 x PG5003 DISC BRAKE CALIPER ASSEMBLY LH UFP DB3 (DOUBLE BANJO FITTING) 1 x PG5005 DISC BRAKE CALIPER ASSEMBLY RH UFP DB3 (DOUBLE BANJO FITTING) 4 x DISC CALIPER BOLT 7/16" x 1" SHCS (UFP) 1 x PL2128 5-WAY FULL GROUND WIRE HARNESS 30' 6 x PLASTIC WIRE TIE HD 14-1/2" 2 x CHAIN W/ ONE HOOK 40" 4 x CAPSCREW PLATED NC 1/2" x 4-1/2" GR5 4 x NUT LOCK NI 1/2-13 PLATED OWNERS MANUAL

PG1038 COMPLETE 8-LUG DISC BRAKE KIT 12K TO 20K (DEXTER / UFP)

REPRESENTATION PHOTO IF YOU WANT TO ADD BRAKES TO A TRAILER THAT WAS NEVER EQUIPPED WITH THEM, MAKE SURE THERE IS AT LEAST FOUR-INCHES OF CLEARANCE FROM THE BRAKE MOUNTING PLATE ON THE AXLE OR TORSION ARM TO THE OUTSIDE EDGE OF THE FRAME. MAGIC TILT BRAKE KIT ~ PG1038 TANDEM 8,000-POUND (8-LUG) AXLE TRAILERS COMES WITH PG4856 DOUBLE BANJO FITTING TO CONNECT BRAKE LINES. UFP SPINDLE MOUNTING HARDWARE (NOT INCLUDED): PH2130 IF USING ON NON-UFP AXLES WITH 1" SPINDLE THREADS YOU WILL NEED THE PH2165 CONVERSION KIT (NOT INCLUDED) ADDITIONAL AXLE(S) BRAKE KIT PG1044 (NOT INCLUDED) INCLUDES: 2 x BEARING 1-1/4" UFP 2 x BEARING 1-3/4" UFP (25580) 2 x SEAL 1-3/4" UFP (21333) 1 x BEARING PROTECTOR SET SS 2.717 1 x PG1096 DEMCO ACTUATOR DISC #20000 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 8' 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 23' 2 x PG2028-1 DISC ROTOR AND HUB 12" 8-LUG UFP 1 x CALIPER FITTING PLUG UFP #32212 1 x PL2142 5-WAY FULL GROUND WIRE HARNESS 40' 1 x PG5003 DISC BRAKE CALIPER ASSEMBLY LH UFP DB3 (DOUBLE BANJO FITTING) 1 x PG5005 DISC BRAKE CALIPER ASSEMBLY RH UFP DB3 (DOUBLE BANJO FITTING) 4 x DISC CALIPER BOLT 7/16" x 1" SHCS (UFP) 6 x PLASTIC WIRE TIE HD 14-1/2" 2 x CHAIN W/ ONE HOOK 40" 4 x CAPSCREW PLATED NC 1/2" x 4-1/2" GR5 4 x NUT LOCK NI 1/2-13 PLATED OWNERS MANUAL

PG1040 ADDITIONAL AXLE 5-LUG DISC BRAKE KIT (DEXTER / UFP)

REPRESENTATION PHOTO IF YOU WANT TO ADD BRAKES TO A TRAILER THAT WAS NEVER EQUIPPED WITH THEM, MAKE SURE THERE IS AT LEAST FOUR-INCHES OF CLEARANCE FROM THE BRAKE MOUNTING PLATE ON THE AXLE OR TORSION ARM TO THE OUTSIDE EDGE OF THE FRAME. MAGIC TILT BRAKE KIT ~ PG1040 COMES WITH PG4856 DOUBLE BANJO FITTING TO CONNECT BRAKE LINES. UFP SPINDLE MOUNTING HARDWARE (NOT INCLUDED): PH2125 IF USING ON NON-UFP AXLES WITH 1" SPINDLE THREADS YOU WILL NEED THE PH2160 CONVERSION KIT (NOT INCLUDED) INCLUDES: 2 x BEARING 1-1/16" (44649) 2 x BEARING 1-3/8" (68149) 2 x SEAL 1-3/8" UFP (257-168) 1 x BEARING PROTECTOR SET SS 1.980 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 4' 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 8' 2 x PG2026-1 DISC ROTER AND HUB 10" 5-LUG UFP 1 x CALIPER FITTING PLUG UFP #32212 1 x PG5003 DISC BRAKE CALIPER ASSEMBLY LH UFP DB3 (DOUBLE BANJO FITTING) 1 x PG5005 DISC BRAKE CALIPER ASSEMBLY RH UFP DB3 (DOUBLE BANJO FITTING) 4 x DISC CALIPER BOLT 7/16" x 1" SHCS (UFP) 6 x PLASTIC WIRE TIE HD 14-1/2" OWNERS MANUAL

PG1042 ADDITIONAL AXLE 6-LUG DISC BRAKE KIT (DEXTER / UFP)

REPRESENTATION PHOTO IF YOU WANT TO ADD BRAKES TO A TRAILER THAT WAS NEVER EQUIPPED WITH THEM, MAKE SURE THERE IS AT LEAST FOUR-INCHES OF CLEARANCE FROM THE BRAKE MOUNTING PLATE ON THE AXLE OR TORSION ARM TO THE OUTSIDE EDGE OF THE FRAME. MAGIC TILT BRAKE KIT ~ PG1042 COMES WITH PG4856 DOUBLE BANJO FITTING TO CONNECT BRAKE LINES. UFP SPINDLE MOUNTING HARDWARE (NOT INCLUDED): PH2130 IF USING ON NON-UFP AXLES WITH 1" SPINDLE THREADS YOU WILL NEED THE PH2165 CONVERSION KIT (NOT INCLUDED) INCLUDES: 2 x BEARING 1-1/4" 2 x BEARING 1-3/4" (25580) 2 x SEAL 1-3/4" UFP (21333) 2 x PF1101 STAINLESS BEARING PROTECTOR 2.441" 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 4' 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 8' 2 x PG2027-1 DISC ROTER AND HUB 12" 6-LUG UFP 1 x CALIPER FITTING PLUG UFP #32212 1 x PG5003 DISC BRAKE CALIPER ASSEMBLY LH UFP DB3 (DOUBLE BANJO FITTING) 1 x PG5005 DISC BRAKE CALIPER ASSEMBLY RH UFP DB3 (DOUBLE BANJO FITTING) 4 x DISC CALIPER BOLT 7/16" x 1" SHCS (UFP) 6 x PLASTIC WIRE TIE HD 14-1/2" OWNERS MANUAL

PG1044 ADDITIONAL AXLE 8-LUG DISC BRAKE KIT (DEXTER / UFP)

REPRESENTATION PHOTO IF YOU WANT TO ADD BRAKES TO A TRAILER THAT WAS NEVER EQUIPPED WITH THEM, MAKE SURE THERE IS AT LEAST FOUR-INCHES OF CLEARANCE FROM THE BRAKE MOUNTING PLATE ON THE AXLE OR TORSION ARM TO THE OUTSIDE EDGE OF THE FRAME. MAGIC TILT BRAKE KIT ~ PG1044 COMES WITH PG4856 DOUBLE BANJO FITTING TO CONNECT BRAKE LINES. UFP SPINDLE MOUNTING HARDWARE (NOT INCLUDED): PH2130 IF USING ON NON-UFP AXLES WITH 1" SPINDLE THREADS YOU WILL NEED THE PH2165 CONVERSION KIT (NOT INCLUDED) INCLUDES: 2 x BEARING 1-1/4" 2 x BEARING 1-3/4" (25580) 2 x SEAL 1-3/4" UFP (21333) 2 x BEARING PROTECTOR 2.328 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 4' 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 8' 1 x PG2028-1 DISC ROTER AND HUB 12" 8-LUG UFP 2 x CALIPER FITTING PLUG UFP #32212 1 x PG5003 DISC BRAKE CALIPER ASSEMBLY LH UFP DB3 (DOUBLE BANJO FITTING) 1 x PG5005 DISC BRAKE CALIPER ASSEMBLY RH UFP DB3 (DOUBLE BANJO FITTING) 4 x DISC CALIPER BOLT 7/16" x 1" SHCS (UFP) 6 x PLASTIC WIRE TIE HD 14-1/2" OWNERS MANUAL

PG1326-1

21' BRAKE LINE KIT, DOUBLE BANJO

PG1332 ~ BRAKE LINE KIT TO ADD SECOND AXLE SINGLE-BANJO

REPRESENTATION PHOTO MAGIC TILT BRAKE LINE KIT SECOND AXLE ~ PG1332 INCLUDES: 2 x PG1175 T-FITTINGS 2 x PG1178 1' BRAKE HOSE WITH SWIVEL 1 x PG1182 4' BRAKE HOSE WITH SWIVEL 1 x PG1183 6' 6" BRAKE HOSE WITH SWIVEL 6 x PL2954 14-1/2" PLASTIC WIRE TIES

PG1332-1 ~ BRAKE LINE KIT TO ADD SECOND AXLE DOUBLE-BANJO

REPRESENTATION PHOTO MAGIC TILT BRAKE LINE KIT SECOND AXLE ~ PG1332-1 INCLUDES: 1 x PG4862 BRAKE CALIPER FITTING PLUG 1 x PG1182 4' BRAKE HOSE WITH SWIVEL 1 x PG1186 8' BRAKE HOSE WITH SWIVEL 6 x PL2954 14" PLASTIC WIRE TIES

PG1334 ~ BRAKE LINE KIT TO ADD SECOND & THIRD AXLES SINGLE-BANJO

REPRESENTATION PHOTO MAGIC TILT BRAKE LINE KIT SECOND & THIRD AXLE ~ PG1334 INCLUDES: 4 x PG1175 T-FITTING 3 x PG1178 1' BRAKE HOSE WITH SWIVEL 2 x PG1182 4' BRAKE HOSE WITH SWIVEL 2 x PG1183 6' 6" BRAKE HOSE WITH SWIVEL 12 x PL2954 14" PLASTIC WIRE TIE

PG1334-1 ~ BRAKE LINE KIT TO ADD SECOND & THIRD AXLES DBL-BANJO

REPRESENTATION PHOTO MAGIC TILT BRAKE LINE KIT SECOND & THIRD AXLE ~ PG1334-1 INCLUDES: 1 x PG4862 CALIPER FIITING PLUG 2 x PG1182 4' BRAKE HOSE WITH SWIVEL 2 x PG1186 8' BRAKE HOSE WITH SWIVEL 12 x PL2954 14" PLASTIC WIRE TIE

PG2032

DISC BRAKE ROTOR KIT 10" 5L [NO CAL] EA. - UFP

PG2035 DISC BRAKE ASSEMBLY 8-LUG (DEXTER / UFP)

REPRESENTATION PHOTO IF YOU WANT TO ADD BRAKES TO A TRAILER THAT WAS NEVER EQUIPPED WITH THEM, MAKE SURE THERE IS AT LEAST FOUR-INCHES OF CLEARANCE FROM THE BRAKE MOUNTING PLATE ON THE AXLE OR TORSION ARM TO THE OUTSIDE EDGE OF THE FRAME. MAGIC TILT DISC BRAKE ASSEMBLY ~ PG2035 COMES WITH PG4856 DOUBLE BANJO FITTING TO CONNECT BRAKE LINES. UFP SPINDLE MOUNTING HARDWARE (NOT INCLUDED): PH2130 IF USING ON NON-UFP AXLES WITH 1" SPINDLE THREADS YOU WILL NEED THE PH2165 CONVERSION KIT (NOT INCLUDED) INCLUDES: 16 x LUG NUT 13/16" 2 x BEARING 1-1/4" (67048) 2 x BEARING 1-3/4" (25580) 2 x SEAL 1-3/4" UFP (21333) 1 x BEARING PROTECTOR SET 2.717 2 x PG2028-1 DISC ROTOR AND HUB 12" 8-LUG UFP 1 x PG5003 DISC BRAKE CALIPER ASSEMBLY LH UFP DB3 (DOUBLE BANJO FITTING) 1 x PG5005 DISC BRAKE CALIPER ASSEMBLY RH UFP DB3 (DOUBLE BANJO FITTING) 4 x 7/16" x 1" SHCS BOLT UFP DISC CALIPER 2 x COTTER PIN 1/8" x 1-1/4" UFP OWNERS MANUAL

PG2070-L ~ DISC BRAKE ASSEMBLY 5-LUG GREASED (DEXTER / UFP)

To Add brakes to a trailer that was never equipped with them, Confirm there is At least four-inches of clearance from the brake mounting plate on the axle or torsion arm to the outside edge of the frame. Magic Tilt Brake Assembly ~ PG2070-L Good to know: - Bearings, Races and seals are installed in rotors and greased (Ready-To-Go). - 2 x PE2050 Replacement Seals are in the box (Loose) To accomodate non-UFP spindles if needed. Customer is responsible for determination. - Ships with PG4856 Double banjo fittings to connect brake lines. - Includes UFP hub mounting hardware. If using on non-UFP axles with 1" Spindle Threads you'll also need the PH2160 Conversion Kit (Not Included). Included in this kit: 10 x PD2250 Lug Nut 13/16" 2 x PE1400 Bearing 1-1/16" (44649) - Installed 2 x PE1450 Bearing 1-3/8" (68149) - Installed 2 x PE2055 Seal 2.57" x 1.68" UFP (257-168) - Installed 2 x PF1054 Bearing Protector SS 1.980 2 x PF1060 Bearing Protector Bra 1.980 2 x PG2026-1 Disc Rotor And Hub 10" 5-Lug Plated UFP 1 x PG5003 Disc brake caliper assembly LH UFP db3 (Double Banjo Fitting) 1 x PG5005 Disc brake caliper assembly RH UFP db3 (Double Banjo Fitting) 4 x PG5007 Disc Caliper Bolt 7/16" x 1" Shcs (UFP) 2 x PH2012 Cotter Pin 1/8" x 1-1/4" Plated UFP 1 x PG4862 Caliper Fitting Plug Brass 2 x PH1980 Spindle Nut 13/16" UFP 2 x PH2108 Spindle Nut Retainer UFP 2 x PH2065 Axle D-Washer 3/4" x 3/32" UFP 2 x PE2050 Seal 2.55" x 1.71" Non-UFP - Loose Owners Manual

PG2071-L ~ DISC BRAKE ASSEMBLY 6-LUG GREASED (DEXTER / UFP)

REPRESENTATION PHOTO IF YOU WANT TO ADD BRAKES TO A TRAILER THAT WAS NEVER EQUIPPED WITH THEM, MAKE SURE THERE IS AT LEAST FOUR-INCHES OF CLEARANCE FROM THE BRAKE MOUNTING PLATE ON THE AXLE OR TORSION ARM TO THE OUTSIDE EDGE OF THE FRAME. MAGIC TILT DISC BRAKE ASSEMBLY ~ PG2071-L - BEARINGS, RACES AND SEALS ARE INSTALLED IN ROTORS AND GREASED (READY-TO-GO). - 2 x PE2100 REPLACEMENT SEALS ARE INCLUDED (LOOSE) TO ACCOMODATE NON-UFP SPINDLES IF NEEDED. CUSTOMER IS RESPONSIBLE FOR DETERMINATION. - COMES WITH PG4856 DOUBLE BANJO FITTING TO CONNECT BRAKE LINES. - INCLUDES UFP HUB MOUNTING HARDWARE. IF USING ON NON-UFP AXLES WITH 1" SPINDLE THREADS YOU WILL NEED THE PH2165 CONVERSION KIT (NOT INCLUDED). INCLUDES: 12 x PD2250 LUG NUT 13/16" 2 x PE1550 BEARING 1-1/4" (15123) - INSTALLED 2 x PE1600 BEARING 1-3/4" (25580) - INSTALLED 2 x PE2101 SEAL 3.37" x 2.13" UFP (21333) - INSTALLED 2 x PF1101 BEARING PROTECTOR SS 2.441" 2 x PF1063 BEARING PROTECTOR BRA 2.441" 2 x PG2027-1 DISC ROTOR AND HUB 12" 6-LUG PLATED UFP 1 x PG500 3 DISC BRAKE CALIPER ASSEMBLY LH UFP DB3 (DOUBLE BANJO FITTING) 1 x PG5005 DISC BRAKE CALIPER ASSEMBLY RH UFP DB3 (DOUBLE BANJO FITTING) 4 x PG5007 DISC CALIPER BOLT 7/16" x 1" SHCS (UFP) 2 x PH2012 COTTER PIN 1/8" x 1-1/4" PLATED UFP 1 x PG4862 CALIPER FITTING PLUG BRASS 2 x PH1980 SPINDLE NUT 13/16" UFP 2 x PH2108 SPINDLE NUT RETAINER UFP 2 x PH2066 AXLE D-WASHER 3/4" x 3/16" UFP 2 x PE2100 SEAL 3.37" x 2.23" NON-UFP - LOOSE OWNERS MANUAL

PG3052 ~COUPLER LATCH REPAIR KIT DEXTER / TITAN 4358400

REPRESENTATION PHOTO MAGIC TILT LEVER LOCK REPAIR KIT ~ PG3052 COUPLER REPAIR KIT FOR DEXTER / TITAN MODEL 60 COUPLERS AND BRAKE ACTUATORS

PG3056 ~ BREAKAWAY LEVER ASSEMBLY DEXTER / TITAN MODEL 60 (068-188-00)

REPRESENTATION PHOTO MAGIC TILT DISC BRAKE BREAKAWAY LEVER ASSEMBLY : OLD PART NUMBER 43595 INCLUDES: BREAKAWAY CABLE AND HOOK MAY COME WTH S-HOOK

PG3216 ~ BREAKAWAY LEVER DEXTER / TITAN 068-017-00

REPRESENTATION PHOTO MAGIC TILT DISC BRAKE BREAKAWAY LEVER ASSEMBLY ~ PG3216 : REPLACES OLD PART NUMBER 1054100 CABLE SOLD SEPERATELY

PG4808 ~ COUPLER LATCH REPAIR KIT A-60, A-75 DEXTER / UFP

REPRESENTATION PHOTO MAGIC TILT LATCH REPLACEMENT KIT ~ PG4808

PG4812 ~ BREAKAWAY CABLE A-60, A-75 DEXTER / UFP

REPRESENTATION PHOTO MAGIC TILT BREAKAWAY CABLE ~ PG4812 SEE REPLACEMENT VIDEO IN OUR TRAILER KNOWLEDGE SECTION

PG4820 ~ LATCH PIN KIT A-60, A-75, A-160 DEXTER / UFP

REPRESENTATION PHOTO MAGIC TILT LATCH PIN KIT ~ PG4820 INCLUDES REPLACEMENT SNAP RING FOR 7.5K UFP ACTUATORS ATTACHES TO 16K ACTUATORS WITH POP RIVET (NOT INCLUDED)

PG4823 ~ LATCH PIN KIT 1-1/4" DEXTER / UFP

REPRESENTATION PHOTO MAGIC TILT HITCH PIN KIT ~ PG4823 INCLUDES : PIN, CLIP, AND CABLE WILL NOT WORK ON NEWER IN-LINE STYLE ACTUATORS

PG4824 ~ ROLLER PIN / PAD SERVICE KIT A160 ACTUATOR DEXTER / UFP K71-772-00

REPRESENTATION PHOTO MAGIC TILT ACTUATOR REPAIR KIT ~ PG4824 PROVIDES REPLACEMENT WEAR ITEMS FOR SMOOTH OPERATION. INCLUDES: 2 X RUB PADS 7-5/8" x 3-3/8" x 1" 2 X BUSHINGS 15/16" OD x 1-1/4" 4 X ROLLER PINS 3/4" x 4-5/16" 8 X SNAP RINGS 3/4"

PG4826 ~ COUPLER LATCH REPAIR KIT A-160 DEXTER / UFP

REPRESENTATION PHOTO MAGIC TILT LATCH REPLACEMENT KIT ~ PG4826

PG4827 ~ BREAKAWAY CABLE TOP MOUNT DEXTER/UFP A-160

REPRESENTATION PHOTO MAGIC TILT BREAWAY CABLE ~ PG4827

PG4832 ~ BREAKAWAY CABLE TOP MOUNT DEMCO

REPRESENTATION PHOTO MAGIC TILT BREAWAY CABLE ~ PG4832

PH1320 ~ REMOVABLE SPINDLE 3750# TORSION DEXTER / TIE DOWN

REPRESENTATION PHOTO MAGIC TILT TORSION AXLE SPINDLE ~ PH1320 INCLUDES: 1" NUT, WASHER AND COTTER PIN FOR MOUNTING SPINDLE TO TORSION ARM DOES NOT INCLUDE FOLLOWING SPINDLE-TO-HUB HARDWARE: PH2060 SPINDLE WASHER PH2000 SPINDLE NUT PH2014 COTTER PIN USE WITH FOLLOWING HUBS (NOT INCLUDED): PD1702-L IDLER HUB KIT PG2026-1 DISC ROTOR

PH1325 ~ TORSION ARM 3" AXLES NON-POSI LUBE DEXTER / UFP

REPRESENTATION PHOTO MAGIC TILT TORSION ARM & SPINDLE ~ PH1325 CAUTION – MAKE SURE YOU PROPERLY IDENTIFY YOUR BRAND OF TORSION ARM AS UFP (SEE SECOND IMAGE) INCLUDES 4-HOLE BRAKE PLATE AND TORSION ARM MOUNTING BOLT REQUIRES THE FOLLOWING HUB MOUNTING HARDWARE KIT PH2125 (NOT INCLUDED)

PH1327 ~ TORSION ARM 3" AXLES W/ POSI-LUBE DEXTER / UFP

REPRESENTATION PHOTO MAGIC TILT TORSION ARM & SPINDLE ~ PH1327 CAUTION – MAKE SURE YOU PROPERLY IDENTIFY YOUR BRAND OF TORSION ARM AS UFP (SEE SECOND IMAGE) INCLUDES 4-HOLE BRAKE PLATE AND TORSION ARM MOUNTING BOLT REQUIRES THE FOLLOWING HUB MOUNTING HARDWARE KIT PH2125 (NOT INCLUDED)

PH1980 ~ SPINDLE NUT 13/16"

REPRESENTATION PHOTO MAGIC TILT SPINDLE NUT ~ PH1980 SOLD INDIVIDUALLY

PH2000 ~ SPINDLE NUT 1"

REPRESENTATION PHOTO MAGIC TILT SPINDLE NUT ~ PH2000 SOLD INDIVIDUALLY

PH2108 ~ SPINDLE NUT RETAINER

REPRESENTATION PHOTO MAGIC TILT SPINDLE NUT RETAINER ~ PH2108 SOLD INDIVIDUALLY

PH2145 ~ HUB CONVERSION KIT 1-1/16" SPINDLES (NON-UFP HUBS to UFP AXLES)

REPRESENTATION PHOTO MAGIC TILT HUB CONVERSION KIT ~ PH2145 INCLUDES: ENOUGH HARDWARE TO CONVERT TWO HUBS TO 1-1/16" UFP-STYLE SPINDLES 2 x PE2010 SEAL 1-1/16" UFP (125-198) 2 x PH1980 SPINDLE NUT 13/16" UFP 2 x PH2012 COTTER PIN 1/8" x 1-1/4" UFP 2 x PH2065 3/4" AXLE D WASHER 3/32" UFP 2 x PH2108 SPINDLE NUT RETAINER UFP

PH2150 ~ HUB CONVERSION KIT 1-3/8" SPINDLES (NON-UFP HUBS to UFP AXLES)

REPRESENTATION PHOTO MAGIC TILT HUB CONVERSION KIT ~ PH2150 INCLUDES: ENOUGH HARDWARE TO CONVERT TWO HUBS TO 3.5K UFP-STYLE SPINDLES 2 x PE2055 SEAL 1-3/8" UFP (168-257) 2 x PH1980 SPINDLE NUT 13/16" UFP 2 x PH2012 COTTER PIN 1/8" x 1-1/4" UFP 2 x PH2065 3/4" AXLE D WASHER 3/32" UFP 2 x PH2108 SPINDLE NUT RETAINER UFP

PH2155 ~ HUB CONVERSION KIT 1-3/4" SPINDLES (NON-UFP HUBS to UFP AXLES)

REPRESENTATION PHOTO MAGIC TILT HUB CONVERSION KIT ~ PH2155 INCLUDES: ENOUGH HARDWARE TO CONVERT TWO HUBS TO ALL UFP-STYLE 1-1/4" x 1-3/4" SPINDLES 2 x PE2101 SEAL 1-3/4" UFP (21333) 2 x PH1980 SPINDLE NUT 13/16" UFP 2 x PH2012 COTTER PIN 1/8" x 1-1/4" UFP 2 x PH2066 3/4" AXLE D WASHER 3/16" UFP 2 x PH2108 SPINDLE NUT RETAINER UFP

PH2160 ~ CONVERSION KIT (5-LUG 3.5K UFP ROTORS & HUBS to NON-UFP AXLES)

REPRESENTATION PHOTO MAGIC TILT HUB/ROTOR CONVERSION KIT ~ PH2160 INCLUDES: ENOUGH HARDWARE TO CONVERT TWO 5-LUG ROTORS OR HUBS TO EITHER 1" D OR 1" ROUND SPINDLES 2 x PE2050 SEAL 1-3/8" NON-UFP (171-255) 2 x PH2014 COTTER PIN 1/8" x 1-3/4" (1" SPINDLE THREADS) 2 x PH2000 AXLE NUT 1" CASTLE NON-UFP 2 x PH2105 TANG WASHER (1" D-SPINDLES) 2 x PH2070 SPINDLE WASHER (1" D-SPINDLES) 2 x PH2060 SPINDLE WASHER (1" ROUND SPINDLES)

PH2165 ~ CONVERSION KIT (6 & 8-LUG UFP ROTORS & HUBS TO NON-UFP AXLES)

REPRESENTATION PHOTO MAGIC TILT HUB/ROTOR CONVERSION KIT ~ PH2165 INCLUDES: ENOUGH HARDWARE TO CONVERT TWO 6 OR 8-LUG ROTORS OR HUBS TO EITHER 1" D OR 1" ROUND SPINDLES 2 x PE2100 SEAL 1-3/4" NON-UFP (22333) 2 x PH2014 COTTER PIN 1/8" x 1-3/4" (1" SPINDLE THREADS) 2 x PH2000 AXLE NUT 1" CASTLE NON-UFP 2 x PH2105 TANG WASHER (1" D-SPINDLES) 2 x PH2070 SPINDLE WASHER (1" D-SPINDLES) 2 x PH2060 SPINDLE WASHER (1" ROUND SPINDLES)

PJ1350 ~ DOUBLE-EYE SPRING 20"

REPRESENTATION PHOTO MAGIC TILT LEAF SPRING ~ PJ1350 # LEAF: 3 DOUBLE-EYE SPRINGS ARE MEASURED FROM THE CENTER OF THE FRONT EYE TO THE CENTER OF THE REAR EYE. INCLUDES .58" ID NYLON SPRING BUSHINGS (ALLOWS FOR GALVANIZED 1/2" BOLT) DOES NOT INCLUDE MOUNTING HARDWARE MOUNTING HARDWARE KITS HARDWARE KITS

PK1000 ~ 1-AXLE MOUNT KIT 1-EYE 1-1/2" AXLE GALVANIZED

REPRESENTATION PHOTO MAGIC TILT SINGLE AXLE MOUNT KIT ~ PK1000 Provides all necessary hardware to mount single-eye springs on one 1-1/2" square axle. FOR CORRECT U-BOLT, SELECT NUMBER OF SPRING LEAVES IN DROP-DOWN INCLUDES: 2 x PK1200 3-HOLE PLATES GALVANIZED 2 x CAPSCREW 1/2" x 3-1/2" GR 5 PLATED 2 x NUT NYLOC 1/2-13 PLATED 4 x NUT HEX 1/2-13 GALVANIZED 4 x WASHER FLAT 1/2" GALVANIZED 4 x WASHER LOCK 1/2" GALVANIZED 2 x U-BOLT 1/2" x 2-3/4" x SELECT GALVANIZED

PK1050 ~ 1-AXLE MOUNT KIT 1-EYE 2x2 AXLE GALVANIZED

REPRESENTATION PHOTO MAGIC TILT SINGLE AXLE MOUNT KIT ~ PK1050 PROVIDES ALL NECESSARY HARDWARE TO MOUNT SINGLE-EYE SPRINGS ON ONE 2" SQUARE AXLE FOR CORRECT U-BOLT, SELECT NUMBER OF SPRING LEAVES IN DROP-DOWN 3, 4, 5, 6 INCLUDES: 2 x PK1250 5-HOLE PLATES GALV 2 x CAPSCREW 1/2" x 3-1/2" GR 5 PLATED 2 x NUT NYLOCK 1/2-13 PLATED 8 x NUT HEX 1/2-13 GALV 8 x WASHER FLAT USS 1/2" GALV 8 x WASHER LOCK 1/2" GALV 4 x U-BOLT 1/2" x 2-1/16" x SELECT GALV

PK1050-1 ~ 1-AXLE MOUNT KIT 1-EYE 2x3 AXLE GALVANIZED

REPRESENTATION PHOTO MAGIC TILT SINGLE AXLE MOUNT KIT ~ PK1050-1 PROVIDES ALL NECESSARY HARDWARE TO MOUNT SINGLE-EYE SPRINGS ON ONE 2" x 3" AXLE FOR CORRECT U-BOLT, SELECT NUMBER OF SPRING LEAVES IN DROP-DOWN 3, 4, 5, 6 INCLUDES: 2 x PK1250 5-HOLE PLATES GALV 2 x CAPSCREW 1/2" x 3-1/2" GR 5 PLATED 2 x NUT NYLOCK 1/2-13 PLATED 8 x NUT HEX 1/2-13 GALV 8 x WASHER FLAT USS 1/2" GALV 8 x WASHER LOCK 1/2" GALV 4 x U-BOLT 1/2" x 2-1/16" x SELECT GALV

PK1100 ~ 1-AXLE MOUNT KIT 2-EYE 2x2 AXLE GALVANIZED

REPRESENTATION PHOTO MAGIC TILT SINGLE AXLE MOUNT KIT ~ PK1100 Provides all necessary hardware to mount double-eye springs on one 2" square axle. FOR CORRECT U-BOLT, SELECT NUMBER OF SPRING LEAVES IN DROP-DOWN 3, 4, 5, 6 INCLUDES: 2 x PK1250 5-HOLE PLATES GALV 4 x PK1300 2-HOLE SHACKLE PLATE GALV 2 x SPACER DOUBLE EYE SPRING 1-3/4" ALUM 6 x CAPSCREW 1/2" x 3-1/2" GR 5 PLATED 6 x NUT NYLOCK 1/2-13 PLATED 8 x NUT HEX 1/2-13 GALV 12 x WASHER FLAT USS 1/2" GALV 8 x WASHER LOCK 1/2" GALV 4 x U-BOLT 1/2" x 2-1/16" x SELECT GALV

PK1100-1 ~ 1-AXLE MOUNT KIT 2-EYE 2x3 AXLE GALVANIZED

REPRESENTATION PHOTO MAGIC TILT SINGLE AXLE MOUNT KIT ~ PK1100-1 Provides all necessary hardware to mount double-eye springs on one 2" x 3" square axle. FOR CORRECT U-BOLT, SELECT NUMBER OF SPRING LEAVES IN DROP-DOWN 3, 4, 5, 6 INCLUDES: 2 x PK1250 5-HOLE PLATE GALV 4 x PK1300 2-HOLE SHACKLE PLATE GALV 2 x SPACER D-EYE SPRING 1-3/4" ALUM 6 x GRADE-5 BOLT (1/2" x 3-1/2") PLATED 6 x 1/2" NYLOCK NUT PLATED 8 x 1/2" HEX NUT GALV 12 x 1/2" FLAT WASHER GALV 8 x 1/2" LOCK WASHER GALV 4 x SQUARE U-BOLT 1/2" x 2-1/16" x SELECT GALV

PK1100-SS ~ 1-AXLE MOUNT KIT 2-EYE 2x2 AXLE STAINLESS / GALV

REPRESENTATION PHOTO MAGIC TILT SINGLE AXLE MOUNT KIT ~ PK1100-SS Provides all necessary hardware to mount double-eye springs on one 2" square axle. FOR CORRECT U-BOLT, SELECT NUMBER OF SPRING LEAVES IN DROP-DOWN 3, 4, 5, 6 INCLUDES: 2 x PK1250 5-HOLE PLATES GALV 4 x PK1300 2-HOLE SHACKLE PLATE GALV 2 x SPACER DOUBLE EYE SPRING 1-3/4" ALUM 6 x CAPSCREW 1/2" x 3-1/2" GR 5 PLATED 6 x NUT NYLOCK 1/2-13 PLATED 8 x NUT HEX 1/2-13 STAINLESS 12 x WASHER FLAT USS 1/2" GALV 8 x WASHER LOCK 1/2" STAINLESS 4 x U-BOLT 1/2" x 2-1/16" x SELECT STAINLESS

PK1150 ~ 2-AXLE MOUNT KIT 2-EYE 2x2 AXLE GALVANIZED

REPRESENTATION PHOTO MAGIC TILT TANDEM AXLE MOUNT KIT ~ PK1150 Provides all necessary hardware to mount double-eye springs on two 2" square axles. SPRING TYPE DOUBLE-EYE FOR CORRECT U-BOLT, SELECT NUMBER OF SPRING LEAVES IN DROP-DOWN 3, 4, 5, 6 INCLUDES: 4 x PK1250 5-HOLE PLATES GALV 8 x PK1300 2-HOLE SHACKLE PLATE GALV 12 x CAPSCREW 1/2" x 3-1/2" GR 5 PLATED 2 x CAPSCREW 1/2" x 4" GR 5 PLATED 14 x NUT NYLOCK 1/2-13 PLATED 16 x NUT HEX 1/2-13 GALV 28 x WASHER FLAT USS 1/2" GALV 16 x WASHER LOCK 1/2" GALV 8 x U-BOLT 1/2" x 2-1/16" x SELECT GALV

PK1150-SS ~ 2-AXLE MOUNT KIT 2-EYE 2x2 AXLE STAINLESS / GALV

REPRESENTATION PHOTO MAGIC TILT TANDEM AXLE MOUNT KIT ~ PK1150-SS Provides all necessary hardware to mount double-eye springs on two 2" square axles. FOR CORRECT U-BOLT, SELECT NUMBER OF SPRING LEAVES IN DROP-DOWN 3, 4, 5, 6 INCLUDES: 4 x PK1250 5-HOLE PLATES GALV 8 x PK1300 2-HOLE SHACKLE PLATE GALV 12 x CAPSCREW 1/2" x 3-1/2" GR 5 PLATED 2 x CAPSCREW 1/2" x 4" GR 5 PLATED 14 x NUT NYLOCK 1/2-13 PLATED 16 x NUT HEX 1/2-13 STAINLESS 28 x WASHER FLAT USS 1/2" GALV 16 x WASHER LOCK 1/2" STAINLESS 8 x U-BOLT 1/2" x 2-1/16" x SELECT STAINLESS

PK1152 ~ 2-AXLE MOUNT KIT 2-EYE 2x3 AXLE GALVANIZED

REPRESENTATION PHOTO MAGIC TILT TANDEM AXLE MOUNT KIT ~ PK1152 Provides all necessary hardware to mount double-eye springs on two 2" x 3" axles. FOR CORRECT U-BOLT, SELECT NUMBER OF SPRING LEAVES IN DROP-DOWN 3, 4, 5, 6 INCLUDES: 4 x PK1250 5-HOLE PLATES GALV 8 x PK1300 2-HOLE SHACKLE PLATE GALV 12 x CAPSCREW 1/2" x 3-1/2" GR 5 PLATED 2 x CAPSCREW 1/2" x 4" GR 5 PLATED 14 x NUT NYLOCK 1/2-13 PLATED 16 x NUT HEX 1/2-13 GALV 28 x WASHER FLAT USS 1/2" GALV 16 x WASHER LOCK 1/2" GALV 8 x U-BOLT 1/2" x 2-1/16" x SELECT GALV

PK1152-SS ~ 2-AXLE MOUNT KIT 2-EYE 2x3 AXLE STAINLESS / GALV

REPRESENTATION PHOTO MAGIC TILT TANDEM AXLE MOUNT KIT ~ PK1152-SS Provides all necessary hardware to mount double-eye springs on two 2" x 3" square axles FOR CORRECT U-BOLT, SELECT NUMBER OF SPRING LEAVES IN DROP-DOWN 3, 4, 5, 6 INCLUDES: 4 x PK1250 x 5-HOLE PLATES GALV 8 x PK1300 x 2-HOLE PLATES GALV 12 x PY0260 x CAPSCREW 1/2 x 3-1/2 GR5 PLATED 2 x PY0265 x CAPSCREW 1/2 x 4 GR5 PLATED 16 x PY1025 x LOCK WASHER 1/2 STAINLESS 14 x PY1315 x NUT NYLOCK 1/2-13 PLATED 28 x PY1515 x FLAT WASHER USS 1/2 GALV 16 x PY1785 x HEX NUT 1/2" STAINLESS 16 x PY1905 x FLAT WASHER 1/2" STAINLESS 8 x PY2538 x U-BOLT SS 1/2 x 2-1/16 x SELECT GALV

PK1153 ~ 3-AXLE MOUNT KIT 2-EYE 2x3 AXLE GALVANIZED

REPRESENTATION PHOTO MAGIC TILT TRIPLE AXLE MOUNT KIT ~ PK1153 Provides all necessary hardware to mount double-eye springs on three 2" x 3" axles. FOR CORRECT U-BOLT, SELECT NUMBER OF SPRING LEAVES IN DROP-DOWN 3, 4, 5, 6 INCLUDES: 6 x PK1250 x 5-HOLE PLATES GALV 16 x PK1300 x 2-HOLE SHACKLE PLATE GALV 20 x PY0260 x CAPSCREW 1/2" x 3-1/2" GR 5 PLATED 4 x PY0265 x CAPSCREW 1/2" x 4" GR 5 PLATED 24 x PY1315 x NUT NYLOCK 1/2-13 PLATED 24 x PY1410 x NUT HEX 1/2-13 GALV 48 x PY1515 x WASHER FLAT USS 1/2" GALV 24 x PY1610 x WASHER LOCK 1/2" GALV 12 x PY2050 x U-BOLT 1/2" x 2-1/16" x SELECT GALV

PK2512 ~ 1-AXLE UNDERCARRIAGE 38" 2-EYE INSIDE MOUNT

REPRESENTATION PHOTO SPECIAL ORDER. PLEASE ALLOW ADDITIONAL TIME. MAGIC TILT UNDERCARRIAGE ~ PK2512 WILL WORK ON EITHER LEFT OR RIGHT SIDE 31" BETWEEN STEP MOUNTS USED ON ALUMINUM FRAME TRAILERS HOLE SIZE FOR MOUNTING TO FRAME: 1/2" ON 4-1/4" CENTERS BOLT PATTERN FOR MOUNTING TO FRAME MAY NOT MATCH EXISTING UNDERCARRIAGE AXLE & SPRING-TO-UNDERCARRIAGE HARDWARE KITS: 2x2 AXLES: GALVANIZED PK1100 , STAINLESS/GALV PK1100-SS 2x3 AXLES: GALVANIZED PK1100-1

PK2513 ~ 1-AXLE UNDERCARRIAGE 38" 2-EYE OUTSIDE MOUNT

REPRESENTATION PHOTO MAGIC TILT UNDERCARRIAGE ~ PK2513 WILL WORK ON EITHER LEFT OR RIGHT SIDES 31" BETWEEN STEP MOUNTS USED ON ALUMINUM FRAME TRAILERS HOLE SIZE FOR MOUNTING TO FRAME: 1/2" BOLT PATTERN FOR MOUNTING TO FRAME MAY NOT MATCH EXISTING UNDERCARRIAGE AXLE & SPRING-TO-UNDERCARRIAGE HARDWARE KITS: 2x2 AXLES: GALVANIZED PK1100 , STAINLESS/GALV PK1100-SS 2x3 AXLES: GALVANIZED PK1100-1

PK2550 ~ 2-AXLE UNDERCARRIAGE 63-1/2" NO STEPS

REPRESENTATION PHOTO MAGIC TILT UNDERCARRIAGE ~ PK2550 NO STEPS, FENDER BRACKETS, FRAME MOUNT HOLES USES TWO U-BOLTS TO GO AROUND TUBE OR C-CHANNEL FRAMES (NOT INCLUDED) BOTTOM CAN BE DRILLED TO BOLT DIRECTLY UNDER AN I-BEAM FRAME AXLE & SPRING-TO-UNDERCARRIAGE HARDWARE KITS: 2x2 AXLES: GALVANIZED PK1150 , STAINLESS/GALV PK1150-SS 2x3 AXLES: GALVANIZED PK1152 , STAINLESS/GALV PK1152-SS

PK2655 ~ 2-AXLE UNDERCARRIAGE 71" 68" FENDERS FOR ALUMINUM STEPS

Magic Tilt Undercarriage ~ PK2655 Good to know: Primarily used on aluminum i-beam trailers Hole size for mounting to frame: 1/2" On 4-1/4" Centers Bolt pattern for mounting to frame may not match existing undercarriage Axle & Spring-to-undercarriage hardware kits: 2x2 Axles: Galvanized PK1150 , Stainless/Galv PK1150-SS 2x3 Axles: Galvanized PK1152 , Stainless/Galv PK1152-SS

PK2658 ~ 2-AXLE UNDERCARRIAGE 71" 60" FENDERS FOR ALUMINUM STEPS

REPRESENTATION PHOTO MAGIC TILT UNDERCARRIAGE ~ PK2658 PRIMARILY USED ON ALUMINUM I-BEAM TRAILERS FOR PONTOON BOATS HOLE SIZE FOR MOUNTING TO FRAME: 1/2" ON 4-1/4" CENTERS BOLT PATTERN FOR MOUNTING TO FRAME MAY NOT MATCH EXISTING UNDERCARRIAGE AXLE & SPRING-TO-UNDERCARRIAGE HARDWARE KITS: 2x2 AXLES: GALVANIZED PK1150 , STAINLESS/GALV PK1150-SS 2x3 AXLES: GALVANIZED PK1152 , STAINLESS/GALV PK1152-SS

PK2705 ~ 2-AXLE UNDERCARRIAGE 78" WITH STEPS

REPRESENTATION PHOTO MAGIC TILT UNDERCARRIAGE ~ PK2705 NO FRAME MOUNTING HOLES PRIMARILY USED ON GALVANIZED TRAILERS USES TWO U-BOLTS TO GO AROUND TUBE OR C-CHANNEL FRAMES (NOT INCLUDED) AXLE & SPRING-TO-UNDERCARRIAGE HARDWARE KITS: 2x2 AXLES: GALVANIZED PK1150 , STAINLESS/GALV PK1150-SS 2x3 AXLES: GALVANIZED PK1152 , STAINLESS/GALV PK1152-SS

PK2770 ~ 3-AXLE UNDERCARRIAGE 112" WITH STEPS

REPRESENTATION PHOTO (PLEASE CALL 941-358-1117 FOR SHIPPING QUOTE) MAGIC TILT UNDERCARRIAGE ~ PK2770 NO FRAME MOUNTING HOLES USED ON ALUMINUM AND GALVANIZED TRAILERS USES U-BOLTS TO GO AROUND TUBE OR C-CHANNEL FRAMES (NOT INCLUDED) AXLE & SPRING-TO-UNDERCARRIAGE HARDWARE KIT: PK1153

PK2775 ~ 3-AXLE UNDERCARRIAGE 120" WITH STEPS

REPRESENTATION PHOTO (PLEASE CALL 941-358-1117 FOR SHIPPING QUOTE) MAGIC TILT UNDERCARRIAGE ~ PK2775 USED ON ALUMINUM AND GALVANIZED TRAILERS USES U-BOLTS TO GO AROUND TUBE OR C-CHANNEL FRAMES (NOT INCLUDED) AXLE & SPRING-TO-UNDERCARRIAGE HARDWARE KIT: PK1153

PL1160 ~ PIPE LIGHT KIT BULB (ONE PAIR)

REPRESENTATION PHOTO MAGIC TILT PIPE LIGHT KIT ~ PL1160 FEAUTRES: EASY INSERT ONTO EXISTING 2" PVC TRAILER GUIDE-ONS LONGER LASTING LIGHTS BECAUSE THEY AREN'T SUBMERGED IN WATER DURING LAUNCHING AND LOADING STOP, TAIL, AND TURN FUNCTIONS ON LIGHTS RAISED HIGHER THAN STANDARD TRAILER LIGHTS WHICH OFFERS BETTER VISIBILTY AMBER REFLECTIVE TAPE ON LIGHT HOUSING AIDS IN BACKING TRAILER AT NIGHT TYPE: BULB INCLUDES: - 10' WIRE LEADS - EASY INSTALLATION WIRE CONNECTORS

PL1162 ~ PIPE LIGHT KIT LED (ONE PAIR)

REPRESENTATION PHOTO MAGIC TILT PIPE LIGHT KIT ~ PL1162 EASY INSERT ONTO 2" PVC TRAILER GUIDE-ONS LONGER LASTING LIGHTS BECAUSE THEY AREN'T SUBMERGED IN WATER DURING LAUNCHING AND LOADING STOP, TAIL, AND TURN FUNCTIONS ON LIGHTS AMBER REFLECTIVE TAPE ON LIGHT HOUSING AIDS IN BACKING TRAILER AT NIGHT RAISED HIGHER THAN STANDARD TRAILER LIGHTS WHICH OFFERS BETTER VISIBILITY TYPE: LED INCLUDES: - 10' WIRE LEADS - EASY INSTALLATION WIRE CONNECTORS

PL2700 ~ BULB TRAILER LIGHTING & WIRING KIT <80"

REPRESENTATION PHOTO MAGIC TILT BULB TRAILER LIGHT & WIRING KIT ~ PL2700 APPLICATION: TRAILERS UNDER 80" WIDE TRAILERS WITHOUT SURGE DISC BRAKES INCLUDES: 1 x PL1100 WATERPROOF TAIL LIGHT LH (WITH LICENSE PLATE LIGHT) 1 x PL1150 WATERPROOF TAIL LIGHT RH 2 x PL1065 AMBER CLEARANCE LIGHT 1 x PL2060 25' WIRE HARNESS 4 x PL2311 HEAT-SHRINK BUTT CONNECTOR 14-16 GA 1 x PL2550 LICENSE TAG BRACKET 10 x PL2944 PLASTIC TIE 8"

PL2751 ~ LED TRAILER LIGHTING & WIRING KIT <80"

REPRESENTATION PHOTO MAGIC TILT LED TRAILER LIGHT & WIRING KIT <80"~ PL2751 APPLICATION: TRAILERS WITHOUT SURGE DISC BRAKES INCLUDES: 1 x PL1112 WATERPROOF LED TAIL LIGHT LH (WITH LICENSE PLATE LIGHT) 1 x PL1110 WATERPROOF LED TAIL LIGHT RH 2 x PL1116 AMBER "DOT" CLEARANCE LIGHTS W/ 8" LEAD 1 x PL2060 25' 4-FLAT WIRE HARNESS 4 x PL2311 HEAT-SHRINK BUTT CONNECTORS 14-16 GA 1 x PL2550 LICENSE TAG BRACKET 10 x PL2944 PLASTIC TIES 8"

PL2752 ~ LED TRAILER LIGHTING & WIRING KIT >80"

REPRESENTATION PHOTO MAGIC TILT TRAILER LIGHTING & WIRING KIT LED ~ PL2752 APPLICATION: TRAILERS WITHOUT SURGE DISC BRAKES INCLUDES: 1 x PL1112 WATERPROOF LED TAIL LIGHT LH (WITH LICENSE PLATE LIGHT) 1 x PL1110 WATERPROOF LED TAIL LIGHT RH 2 x PL1116 AMBER "DOT" CLEARANCE LIGHTS W/ 8" LEAD 1 X PL1186 3-LIGHT CLEARANCE BAR 1 x PL2060 25' 4-FLAT WIRE HARNESS 4 x PL2311 HEAT-SHRINK BUTT CONNECTORS 14-16 GA 1 x PL2550 LICENSE TAG BRACKET 10 x PL2944 PLASTIC TIES 8"

PL2755 ~ OPTRONICS TLL12RK LED COMBINATION TAIL LIGHT KIT OVAL

REPRESENTATION PHOTO MAGIC TILT LED SUBMERSIBLE TRAILER LIGHT KIT ~ PL2755 INCLUDES: 2 x 6" OVAL LED WATERPROOF COMBINATION TAIL LIGHTS 2 x RUBBER FRAME GROMMETS 2 x 3-POLE PIGTAILS LIMITED LIFETIME WARRANTY THROUGH OPTRONICS DOES NOT PROVIDE CLEARANCE OR LICENCE PLATE ILLUMINATION RELATED PARTS (NOT INCLUDED) PL2311 BUTT CONNECTOR PL2944 WIRE TIE WITH ANCHOR CHASSIS CLIPS

PL2756 ~ OPTRONICS TLL16RK LED COMBO TAIL LIGHT KIT <80"

REPRESENTATION PHOTO MAGIC TILT LED SUBMERSIBLE TRAILER LIGHT KIT ~ PL2756 INCLUDES: 1 x 8" LED WATERPROOF COMBINATION TAIL LIGHT LH WITH LICENSE PLATE LIGHT 1 x 8" LED WATERPROFF COMBINATION TAIL LIGHT RH 1 x LICENSE PLATE BRACKET 1 x 25&#39; WIRE HARNESS WITH 4-PIN FLAT CONNECTOR MOUNTING HARDWARE LIMITED LIFETIME WARRANTY THROUGH OPTRONICS

PL9060-1 ~ CLEARANCE / MARKER LED KIT

REPRESENTATION PHOTO MAGIC TILT CLEARANCE / MARKER KIT ~ PL9060-1

PO2981 ~ WINCH POST HANDLE

REPRESENTATION PHOTO MAGIC TILT WINCH POST HANDLE ~ P02981 FITS INSIDE 1-1/2" SQUARE TUBING WITH THE FOLLOWING HARDWARE (NOT INCLUDED) PS2210 NUT RETAINER PS2150 SET SCREW KIT

PS1925 ~ GALVANIZED TRAILER UNIVERSAL GUIDE POLE MOUNT PLATE

REPRESENTATION PHOTO MAGIC TILT MOUNT PLATE ~ PS1925 USED IN HARDWARE KIT PS1930 AND PV2155 GUIDE POLE ASSEMBLY. FOR MOUNTING GUIDE POLES TO GALVANIZED TRAILERS USING U-BOLTS.

PS2655 ~ CA CHANNEL MOUNT GUIDE POLE MOUNT PLATE ALUMINUM

REPRESENTATION PHOTO MAGIC TILT MOUNT PLATE ~ PS2655 USED IN HARDWARE KIT PS2658 . FOR MOUNTING GUIDE POLES TO CA SERIES ALUMINUM TRAILERS EQUIPED WITH UNDER-FRAME CHANNEL.

PS2658 ~ CA CHANNEL MOUNT GUIDE POLE MOUNT KIT

REPRESENTATION PHOTO MAGIC TILT GUIDE POLE MOUNT ASSEMBLY ~ PS2658 CHANNEL. INCLUDES: 2 x PS2653-1 CLAMP-ON FOR 1-1/2" GUIDE POLES GALV 2 x PS2655 GUIDE PLATE FOR CA SERIES TRAILERS WITH UNDER-FRAME CHANNEL ALUM 4 x PY1701 1/2" x 1-1/2" SQUARE-HEAD BOLT STAINLESS 4 x PY1820 1/2" NYLOCK NUT STAINLESS 4 x PY1905 1/2" FLAT WASHER STAINLESS 8 x PY1710 3/8" x 1-1/4" BOLT STAINLESS 8 x PY1810 3/8" NYLOCK NUT STAINLESS 16 x PY1902 3/8" FLAT WASHER STAINLESS

PS5100 ~ BOW REST ASSEMBLY 6'

REPRESENTATION PHOTO MAGIC TILT BOW REST KIT ~ PS5100 SPANS TWO 3" x 3" CROSSMEMBERS AT FRONT OF TRAILER INCLUDES: 2 x PV2281 ONE-PIECE BOW REST Y-SUPPORT GALV 2 x CARPETED HORIZONTAL BUNK 2" x 6" x 6' 2 x PS2653 2" TOP HAT BRACKET GALV 4 x PY2035 1/2" x 3-1/16" x 4-5/16" U-BOLT GALV 8 x PY1410 1/2" HEX NUT GALV 8 x PY1610 1/2" LOCK WASHER GALV

PT2190 ~ BOW BOARD HARDWARE KIT HEAVY DUTY ALUMINUM/STAINLESS

REPRESENTATION PHOTO MAGIC TILT BOW BOARD HARDWARE KIT ~ PT2190 DOES NOT INCLUDE LAG SCREWS TO FASTEN BOARDS INCLUDES: 4 X PS2653-A CLAMP-ON TOP HAT ALUMINUM 4 X PT1882 TUBE 2" x 2" x 12" WITH PIVOT HOLE ALUMINUM 4 X PT2075 PIVOT "L" BRACKET ALUMINUM 4 X PY1020 LOCK WASHER 3/8" STAINLESS 4 X PY1720 BOLT 3/8" x 3" STAINLESS 4 X PY1782 NUT 3/8" STAINLESS 8 X PY1902 FLAT WASHER 3/8" STAINLESS 8 X PY2540 U-BOLT 1/2" x 3-1/16" x 4-5/16" STAINLESS 16 X PY1025 LOCK WASHER 1/2" STAINLESS 16 X PY1785 NUT 1/2" STAINLESS

PT2200 ~ BOW BOARD KIT LIGHT-DUTY

6'

Magic Tilt Bow Board Kit ~ PT2200 Spans Two 3" x 3" Crossmembers at front of trailer. Can be used on other crossmember sizes by changing the u-bolts. Included in this kit: 4 x PT1565 8" Bunk Bracket Galv 2 x Carpeted Horizontal Bunk 2" x 6" x 6' 4 x PT2070 Pivot L-Bracket Galv 8 x PY0411 3/8 x 1-1/4" Lag Screw Galv 4 x PY1405 3/8 Hex Nut Galv 8 x PY1406 7/16 Hex Nut Galv 4 x PY1505 3/8 Flat Washer Galv 4 x PY1605 3/8 Lock Washer Galv 8 x PY1606 7/16 Lock Washer Galv 4 x PY1650 3/8 x 1-1/4" Bolt Galv 4 x PY2096 7/16 x 3-1/16" x 4-5/16" U-Bolt Galv

PV1883 ~ DOUBLE CROSS-FRAME SPARE MOUNT (BAR ONLY)

REPRESENTATION PHOTO MAGIC TILT DOUBLE CROSS-FRAME SPARE TIRE MOUNT (BAR ONLY)~ PV1883 REQUIRES THE FOLLOWING HARDWARE (NOT INCLUDED) 4 X PG4860 LUG BOLTS 4 X PG2250 LUG NUTS MOUNTING HARDWARE KITS (NOT INCLUDED) PY8000 (3x3 OR 3x4 TONGUES) PV1885-3 (3x5 TONGUES) DOES NOT WORK WITH 4 OR 8-LUG RIMS MOUNTS ACROSS TONGUE WITH PROPER HARDWARE INSTALLATION VIDEO

PV1885 ~ SINGLE CROSS-FRAME SPARE MOUNT (BAR ONLY)

REPRESENTATION PHOTO MAGIC TILT SINGLE SPARE TIRE MOUNT ~ PV1885 REQUIRES ONE OF THE FOLLOWING MOUNT KITS (NOT INCLUDED) PY8000 (3x3 OR 3x4 TONGUES) PV1885-3 (3x5 TONGUES) BAR ONLY DOES NOT WORK WITH 4 OR 8-LUG RIMS MOUNTS ACROSS A-FRAME AND TONGUE WITH PROPER HARDWARE (NOT INCLUDED) INSTALLATION VIDEO

PV1885-1 ~ SINGLE CROSS-FRAME SPARE MOUNT KIT (3x3, 3x4 TONGUES)

REPRESENTATION PHOTO MAGIC TILT SINGLE SPARE TIRE MOUNT ASSEMBLY ~ PV1885-1 DOES NOT WORK WITH 4 OR 8-LUG RIMS MOUNTS ACROSS A-FRAME AND TONGUE INSTALLATION VIDEO INCLUDES: 2 x PD2250 LUG NUT 13/16" 2 x PG4860 PRESS-IN STUD UFP 2 x PK1320 1-HOLE SLOT PLATE GALV 1 x NW0480 2x2 END CAP 1 x PV1885 ML SPARE TIRE MOUNT GALV 4 x PY1410 NUT HEX 1/2-13 GALV 4 x PY1610 WASHER LOCK 1/2 GALV 2 x PY2050 U-BOLT 1/2 x 2-1/16 x 6-13/16 GALV

PV1885-2 ~ SINGLE CROSS-FRAME SPARE MOUNT KIT 3x5 TONGUE

REPRESENTATION PHOTO MAGIC TILT SINGLE SPARE TIRE MOUNT ASSEMBLY FOR 3x5 TONGUE~ PV1885-2 DOES NOT WORK WITH 4 OR 8-LUG RIMS MOUNTS ACROSS A-FRAME AND TONGUE INSTALLATION VIDEO INCLUDES: 2 x PD2250 LUG NUT 13/16" 2 x PG4860 PRESS-IN STUD UFP 1 x NW0480 2x2 END CAP 1 x PV1885 ML SPARE TIRE MOUNT GALV 2 x PK1320 SLOT PLATE 1-HOLE GALV 2 x PK1300 SHACKLE PLATE 2-HOLE GALV 4 x PY1410 NUT HEX 1/2-13 GALV 4 x PY1659 SCREW HEX HEAD 1/2 x 9 GALV 8 x PY1515 FLAT WASHER US 1/2 GALV 4 x PY1610 LOCK WASHER 1/2 GALV

PV1885-3 ~ CROSS-FRAME SPARE HARDWARE KIT (3x5 TONGUE)

REPRESENTATION PHOTO MAGIC TILT CROSS-FRAME MOUNTING HARDWARE ~ PV1885-3 INCLUDES: 2 x PK1320 SLOT PLATE 1-HOLE GALV 2 x PK1300 SHACKLE PLATE 2-HOLE GALV 4 x PY1410 NUT HEX 1/2-13 GALV 4 x PY1659 SCREW HEX HEAD 1/2 x 9 GALV 8 x PY1515 FLAT WASHER US 1/2 GALV 4 x PY1610 LOCK WASHER 1/2 GALV INSTALLATION VIDEO

PV1930 ~ GALVANIZED TRAILER UNIVERSAL GUIDE POLE MOUNT KIT

REPRESENTATION PHOTO MAGIC TILT GUIDE-ON ASSEMBLY ~ PV1930 TO ORDER, SELECT FRAME HEIGHT IN DROP-DOWN INCLUDES: 2 x PV1925 UNIVERSAL GUIDE-ON BRACKET 4 x PY1995 U-BOLT 3/8" 1-9/16 x 2-5/8 GALV 4 x U-BOLT 1/2" 2-1/16 x * (SELECT FRAME HEIGHT IN DROP-DOWN) 8 x PY1405 3/8" NUT GALV 8 x PY1605 3/8" LOCK WASHER GALV 8 x PY1410 1/2" NUT GALV 8 x PY1610 1/2" LOCK WASHER GALV 8 x PY1515 1/2" FLAT WASHER GALV

PV2155 ~ TUBE GUIDE ASSY STANDARD UNIVERSAL GALVANIZED TRAILERS

REPRESENTATION PHOTO MAGIC TILT STANDARD GUIDE ASSEMBLY ~ PV2155 PLEASE CALL 941-358-1117 FOR SHIPPING QUOTE INDICATE FRAME HEIGHT WHEN CALLING 3", 4", 5" UNIVERSAL KIT FOR TRAILERS WITH 2" WIDE GALVANIZED FRAMES USES PV1930 MOUNTING KIT AND PV2159-66G GUIDE POLE OPTIONAL GUIDE POLE COVERS (62x30x5)

PV2158-2 ~ TUBE GUIDE ASSY STANDARD CA CHANNEL MOUNT

REPRESENTATION PHOTO MAGIC TILT STANDARD TUBE GUIDE ASSEMBLY ~ PV2158-2 PLEASE CALL 941-358-1117 FOR SHIPPING QUOTE INCLUDES: PS2658 HARDWARE KIT PV2159-66G GUIDE POLE PV2157 60" PVC SLEEVE WITH CAP OPTIONAL GUIDE POLE COVERS (62x30x5)

PY8000 ~ CROSS-FRAME SPARE HARDWARE KITS (3x3 & 3x4 TONGUES)

REPRESENTATION PHOTO MAGIC TILT CROSS-FRAME MOUNTING HARDWARE ~ PY8000 INSTALLATION VIDEO INCLUDES: 2 x PK1320 1-HOLE SLOT PLATE GALV 4 x PY1410 NUT HEX 1/2-13 GALV 4 x PY1610 WASHER LOCK 1/2 GALV 2 x PY2050 U-BOLT 1/2" x 2-1/16" x 6-13/16 GALV

PY9040-1 ~ REAR CROSSMEMBER HARDWARE KIT STAINLESS STEEL

REPRESENTATION PHOTO MAGIC TILT CROSSMEMBER HARDWARE KIT ~ PY9040-1 INCLUDES: 4 x PY0491 - SELF TAP SCREW (FOR RUB PAD) 4 x PY1710 - BOLT SS 3/8" x 1-1/4" 4 x PY1820 - NUT NYLOCK SS 1/2" 4 x PY1905 - FLAT WASHER SS 1/2" 2 x PY2540 - U-BOLT SS 1/2" x 3-1/16" x 4-5/16" 12 x PY1810 - NUT NYLOCK SS 3/8" (8 FOR GUIDE POLES) 12 x PY1902 - FLAT WASHER SS 3/8" (8 FOR GUIDE POLES) 4 x PY2500 - U-BOLT SS 3/8" x 1-9/16" x 2-5/8" (FOR GUIDE POLES)

PY9045-1 ~ MID CROSSMEMBER HARDWARE KIT STAINLESS STEEL

REPRESENTATION PHOTO MAGIC TILT CROSSMEMBER HARDWARE KIT ~ PY9045-1 INCLUDES: 4 x PY0491 - SELF TAP SCREW (FOR RUB PAD) 4 x PY1710 - BOLT SS 3/8 x 1-1/4 8 x PY1810 - NUT NYLOCK SS 3/8 16 x PY1902 - FLAT WASHER SS 3/8 4 x PY1725 - BOLT SS 3/8 x 4

RM-U-Bolt Kits (Minimum Order of 20 Each)

11 sizes available

Rubber Plugs for Center Hole Cap

RUBBER PLUG-KNOTT

Side Guide Assemblies

GUIDE BOARD ASSY

SPINDLE NUT

AXLE NUT 3/4" ID

Spindle Seal Kits for UFP Spindles

2 sizes available

2 Rings and 2 O-Rings