Search Results

2"x2" 93.5" Track 80-3/8"SC Straight Spring Axles

2X2X93.5TR 80-3/8 SC 5L DISC

$702.00

2"x2" 93" Track 77.5" SC "V" Spring Axles

2X2X93TR 77.5SC 5L DISC

2"x2" 93" Track 78.5"SC "V" Spring Axles

2X2X93TR 78-1/2" SC 5L DISC

2"x2" 93"Track 77"SC "V" Spring Axles

2X2X93TR 77 SC 5L DISC

2"x3" 84" Track 67"SC "V" Spring Axles

2X3X84TR 67SC 5L HD DISC

$767.00

2"x3" 86" Track 67"SC "V" Spring Axles

2X3X86TR 67SC 6L DISC

$1007.50

2"x3" 93" Track 75"SC "V" Spring Axles

2 sizes available

From$1007.50Choose size

2"x3" 93" Track 76.5"SC "V" Spring Axles

2X3X93TR 76.5SC 5L DISC

$832.00

2"x3" 93" Track 76"SC "V" Spring Axles

2 sizes available

From$832.00Choose size

2"x3" 93" Track 86"SC Straight Spring Axles

2X3X86TR 67SC 6L

$1215.50

205-00308-NA ~ 4-WAY PIGTAIL KARAVAN

REPRESENTATION PHOTO MAGIC TILT REPLACEMENT PIGTAIL FOR KARAVAN ~ 205-00308-NA REPLACEMENT 4-PIN PIGTAIL FOR MAGIC TILT TRAILERS MADE BY KARAVAN INCLUDED MOLDED CONNECTORS 4 X DOUBLE, 2 X SINGLE USED ON TRAILERS WITHOUT BRAKES

$40.95

Out of Stock

205-00309-NA ~ 5-WAY PIGTAIL KARAVAN/SEE 205-00327-NA FOR ALTERNATIVE

SEE 205-00327-NA MAGIC TILT REPLACEMENT PIGTAIL FOR KARAVAN ~ 205-00309-NA RPLACEMENT 5-PIN PIGTAIL FOR MAGIC TILT TRAILERS MADE BY KARAVAN INCLUDED MOLDED CONNECTORS USED ON TRAILERS WITH BRAKES

$63.95

3" x 3" 69"FW Straight Torsion Axles

AX[STR]3X3 W/DISC 69FRM ASS

$1046.50

3" x 3" 70"FW "V" Torsion Axles

AX[V]3X3 HD DISC 70FRM ASSY

$1066.00

3" x 3" 76"FW Straight Torsion Axles

AX[STR]3X3 HD DISC 76FRM

Track:

$1053.00

3" x 3" 79"FW "V" Torsion Axles

AX[V]3X3 HD DISC 79FRM ASSY

$1111.50

3" x 3" 79"FW Straight Torsion Axles

AX[STR]3X3 HD DISC 79FRM ASSY

$1066.00

90885 ~ TEKONSHA P2 ELECTRIC BRAKE CONTROLLER

REPRESENTATION PHOTO ** THIS IS A SPECIAL BUY OFFERED AT A GREATLY REDUCE PRICE! ** MAGIC TILT ELECTRIC BRAKE CONTOLLER ~ 90885 The Prodigy P2 electric brake controller supplies power to your tow vehicle's brakes proportionally. This means that your trailer brakes at the same time and with the same strength as your vehicle - even in reverse gear. If you have to slam on your truck's brakes, the trailer's brakes respond instantly, too - there's no delay. Therefore your vehicle's brakes aren't overworked from trying to stop the entire load, and they suffer less wear and tear extending the longevity of your brakes compared to time based controls. The P2 also cuts power to the trailer's brakes when your vehicle is stopped - extending the life of the magnets and brake shoes in the trailer's brake assemblies. Aside from smoother, more efficient braking that results from proportional application of stopping power, the Prodigy P2 also has a boost feature that gives you more initial braking power for those times when you're towing heavier loads. That's when more braking power is needed to stop the trailer at the same time as the tow vehicle. The boost setting sends 13 or 25 percent more power (depending on which setting you choose) back to the trailer brakes, thus compensating for heavier loads. You can boost the power manually at the push of a button as well. The boost feature gets more power to the trailer brakes exactly when you need it most, and your fully loaded rig brakes smoothly and comfortably. This brake controller levels automatically as you drive, so there's no problem using it on steep hills or when towing through the mountains. The self-leveling feature also makes the Prodigy easy to install: Simply mount it in your cab at any vertical angle (it has 360-degree rotation). It's easy to see the display and to access the pivoting manual override lever on the bottom of the unit. The P2's continuous diagnostic check monitors your connection and magnet condition, so you can fix any problems before they land you on the side of the road. This newest version of Tekonsha's popular Prodigy brake controller has reverse battery protection to preserve the unit and accessory systems. And the power-save mode reduces battery drain when the controller isn't in use.

$134.95

Actuator Cover Plate

BRAKE LOCKOUT CAP-UFP

$26.00

Actuators for 3" Tongues, In-Line

6K# 3HOLE ACTUATOR

$370.50

Actuators for 3" Tongues, In-Line W/Swing

6K# ACTUATOR W/SWING

$487.50

DISC BRAKE ASSY 10" 5L [NO CAL] EA.

UFP

includes : PD2250 LUG NUT 13/16" qty: 5 PD1400 BEARING 1-1/16" [44649] qty: 1 PD1450 BEARING 1-3/8" [68149] qty: 1 PD2055 SEAL 1-3/8"[UFP][257-168] qty: 1 PG2026-1 DISC ROTOR & HUB 10" 5L PLTD UFP bearing protectors sold separately

$102.70

Disc Brake Calipers

2 sizes available

From$149.50Choose size

DISC BRAKE ROTOR KIT 12" 6L [NO CAL] EA.

UFP

$162.50

HYDRAULIC RUBBER BRAKE HOSES

15 sizes available

From$18.85Choose size

PE1151 ~ BEARING KIT 1-1/16" x 1-3/8" (UFP)

Magic Tilt Bearing Kit ~ PE1151 Good to know: Use with rotor/hub combinations PG2026-1 , PG2026-2, PG2024 Inner Race (PE1749) Used Exclusively In 5-Lug UFP 1-Piece Disk Brake Rotors Kit Contains: 1 x PE1400 Bearing 1-1/16" (44649) 1 x PE1450 Bearing 1-3/8" (68149) 1 x PE1710 Race 1" Or 1-1/16" (44610) 1 x PE1749 Race 1-3/8" UFP (68110) 1 x PE2055 Seal 1-3/8" UFP (257-168) 1 x PH2012 Cotter Pin 1/8" x 1-1/4" UFP

$19.95

PG1030 COMPLETE 5-LUG DISC BRAKE KIT ≤7.5K TOP-MOUNT (DEXTER / UFP)

REPRESENTATION PHOTO IF YOU WANT TO ADD BRAKES TO A TRAILER THAT WAS NEVER EQUIPPED WITH THEM, MAKE SURE THERE IS AT LEAST FOUR-INCHES OF CLEARANCE FROM THE BRAKE MOUNTING PLATE ON THE AXLE OR TORSION ARM TO THE OUTSIDE EDGE OF THE FRAME. MAGIC TILT BRAKE KIT ~ PG1030 NEW TOP-MOUNT ACTUATOR REPLACES THE PG1088 INLINE 3-HOLE ACTUATOR ON 3" TALL TONGUES. NEW HOLES WILL NEED TO BE DRILLED IN THE TRAILER TONGUE. COMES WITH PG4856 DOUBLE BANJO FITTING TO CONNECT BRAKE LINES. UFP SPINDLE MOUNTING HARDWARE (NOT INCLUDED): PH2125 IF USING ON NON-UFP AXLES WITH 1" SPINDLE THREADS YOU WILL NEED THE PH2160 CONVERSION KIT (NOT INCLUDED). ADDITIONAL AXLE(S) BRAKE KIT PG1040 (NOT INCLUDED) INCLUDES: 2 x BEARING 1-1/16" (44649) 2 x BEARING 1-3/8" (68149) 2 x SEAL 1-3/8" UFP (257-168) 1 x BEARING PROTECTOR SET SS 1.980 1 x PG1072 ACTUATOR TOP MOUNT DISC DEMCO #7,000 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 8' 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 23' 2 x PG2026-1 DISC ROTOR AND HUB 10" 5-LUG UFP 1 x CALIPER FITTING PLUG UFP #32212 1 x PG5003 DISC BRAKE CALIPER ASSEMBLY LH UFP DB3 (DOUBLE BANJO FITTING) 1 x PG5005 DISC BRAKE CALIPER ASSEMBLY RH UFP DB3 (DOUBLE BANJO FITTING) 4 x 7/16" x 1" SHCS BOLT UFP DISC CALIPER 1 x PL2128 5-WAY FULL GROUND WIRE HARNESS 30' 6 x PLASTIC WIRE TIE HD 14-1/2" 2 x 1/4" CHAIN W/ ONE HOOK 40" 3 x CAPSCREW PLATED NC 1/2 x 4-1/2 GR5 3 x NUT LOCK NI 1/2-13 PLATED OWNERS MANUAL

$1159.95

PG1031 COMPLETE 5-LUG DISC BRAKE KIT ≤7.5K IN-LINE (DEXTER / UFP)

REPRESENTATION PHOTO IF YOU WANT TO ADD BRAKES TO A TRAILER THAT WAS NEVER EQUIPPED WITH THEM, MAKE SURE THERE IS AT LEAST FOUR-INCHES OF CLEARANCE FROM THE BRAKE MOUNTING PLATE ON THE AXLE OR TORSION ARM TO THE OUTSIDE EDGE OF THE FRAME. MAGIC TILT BRAKE KIT ~ PG1031 COMES WITH PG4856 DOUBLE BANJO FITTING TO CONNECT BRAKE LINES. IF USING ON NON-UFP AXLES WITH 1" SPINDLE THREADS YOU WILL NEED THE PH2160 CONVERSION KIT (NOT INCLUDED) UFP SPINDLE MOUNTING HARDWARE (NOT INCLUDED): PH2125 ADDITIONAL AXLE(S) BRAKE KIT PG1040 (NOT INCLUDED) INCLUDES: 2 x BEARING 1-1/16" (44649) 2 x BEARING 1-3/8" (68149) 2 x SEAL 1-3/8" UFP (257-168) 1 x BEARING PROTECTOR SET SS 1.980 1 x PG1090 ACTUATOR IN-LINE DISC UFP #7500 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 8' 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 23' 2 x PG2026-1 DISC ROTOR AND HUB 10" 5-LUG UFP 1 x CALIPER FITTING PLUG UFP #32212 1 x PG5003 DISC BRAKE CALIPER ASSEMBLY LH UFP DB3 (DOUBLE BANJO FITTING) 1 x PG5005 DISC BRAKE CALIPER ASSEMBLY RH UFP DB3 (DOUBLE BANJO FITTING) 4 x 7/16" x 1" SHCS BOLT UFP DISC CALIPER 1 x PL2128 5-WAY FULL GROUND WIRE HARNESS 30' 6 x PLASTIC WIRE TIE HD 14-1/2" 2 x 1/4" CHAIN W/ ONE HOOK 40" 4 x CAPSCREW PLATED NC 1/2 x 4-1/2 GR5 4 x NUT LOCK NI 1/2-13 PLATED OWNERS MANUAL

$1159.95

PG1033 COMPLETE 5-LUG DISC BRAKE KIT 7.5K TO 16K (DEXTER / UFP)

REPRESENTATION PHOTO IF YOU WANT TO ADD BRAKES TO A TRAILER THAT WAS NEVER EQUIPPED WITH THEM, MAKE SURE THERE IS AT LEAST FOUR-INCHES OF CLEARANCE FROM THE BRAKE MOUNTING PLATE ON THE AXLE OR TORSION ARM TO THE OUTSIDE EDGE OF THE FRAME. MAGIC TILT BRAKE KIT ~ PG1033 COMES WITH PG4856 DOUBLE BANJO FITTING TO CONNECT BRAKE LINES. UFP SPINDLE MOUNTING HARDWARE (NOT INCLUDED): PH2125 IF USING ON NON-UFP AXLES WITH 1" SPINDLE THREADS YOU WILL NEED THE PH2160 CONVERSION KIT (NOT INCLUDED) ADDITIONAL AXLE(S) BRAKE KIT PG1040 (NOT INCLUDED) INCLUDES: 2 x BEARING 1-1/16" (44649) 2 x BEARING 1-3/8" (68149) 2 x SEAL 1-3/8" UFP (257-168) 2 x BEARING PROTECTOR 1.980 STAINLESS 1 x PG1095 ACTUATOR IN-LINE DISC #16,000 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 8' 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 23' 2 x PG2026-1 DISC ROTOR AND HUB 10" 5-LUG UFP 1 x CALIPER FITTING PLUG UFP #32212 1 x PG5003 DISC BRAKE CALIPER ASSEMBLY LH UFP (DOUBLE BANJO FITTING) 1 x PG5005 DISC BRAKE CALIPER ASSEMBLY RH UFP (DOUBLE BANJO FITTING) 4 x 7/16" x 1" CALIPER BOLT UFP 1 x PL2128 5-WAY HARNESS 30' 6 x PLASTIC WIRE TIE HD 14-1/2" 2 x 1/4" CHAIN W/ ONE HOOK 40" 4 x CAPSCREW PLATED NC 1/2 x 4-1/2 GR5 4 x NUT LOCK NI 1/2-13 PLATED OWNERS MANUAL

$1639.95

PG1037 COMPLETE 6-LUG DISC BRAKE KIT 10K TO 16K (DEXTER / UFP)

REPRESENTATION PHOTO IF YOU WANT TO ADD BRAKES TO A TRAILER THAT WAS NEVER EQUIPPED WITH THEM, MAKE SURE THERE IS AT LEAST FOUR-INCHES OF CLEARANCE FROM THE BRAKE MOUNTING PLATE ON THE AXLE OR TORSION ARM TO THE OUTSIDE EDGE OF THE FRAME. MAGIC TILT BRAKE KIT ~ PG1037 COMES WITH PG4856 DOUBLE BANJO FITTING TO CONNECT BRAKE LINES. UFP SPINDLE MOUNTING HARDWARE (NOT INCLUDED): PH2130 IF USING ON NON-UFP AXLES WITH 1" SPINDLE THREADS YOU WILL NEED THE PH2165 CONVERSION KIT (NOT INCLUDED) ADDITIONAL AXLE(S) BRAKE KIT PG1042 (NOT INCLUDED) INCLUDES: 2 x BEARING 1-1/4" UFP 2 x BEARING 1-3/4" UFP (25580) 2 x SEAL 1-3/4" UFP (21333) 2 x PF1101 STAINLESS BEARING PROTECTOR 2.441" 1 x PG1095 ACTUATOR DISC UFP #16,000 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 8' 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 23' 2 x PG2027-1 DISC ROTOR AND HUB 12" 6-LUG UFP 1 x CALIPER FITTING PLUG UFP #32212 1 x PG5003 DISC BRAKE CALIPER ASSEMBLY LH UFP DB3 (DOUBLE BANJO FITTING) 1 x PG5005 DISC BRAKE CALIPER ASSEMBLY RH UFP DB3 (DOUBLE BANJO FITTING) 4 x DISC CALIPER BOLT 7/16" x 1" SHCS (UFP) 1 x PL2128 5-WAY FULL GROUND WIRE HARNESS 30' 6 x PLASTIC WIRE TIE HD 14-1/2" 2 x CHAIN W/ ONE HOOK 40" 4 x CAPSCREW PLATED NC 1/2" x 4-1/2" GR5 4 x NUT LOCK NI 1/2-13 PLATED OWNERS MANUAL

$1795.95

PG1038 COMPLETE 8-LUG DISC BRAKE KIT 12K TO 20K (DEXTER / UFP)

REPRESENTATION PHOTO IF YOU WANT TO ADD BRAKES TO A TRAILER THAT WAS NEVER EQUIPPED WITH THEM, MAKE SURE THERE IS AT LEAST FOUR-INCHES OF CLEARANCE FROM THE BRAKE MOUNTING PLATE ON THE AXLE OR TORSION ARM TO THE OUTSIDE EDGE OF THE FRAME. MAGIC TILT BRAKE KIT ~ PG1038 TANDEM 8,000-POUND (8-LUG) AXLE TRAILERS COMES WITH PG4856 DOUBLE BANJO FITTING TO CONNECT BRAKE LINES. UFP SPINDLE MOUNTING HARDWARE (NOT INCLUDED): PH2130 IF USING ON NON-UFP AXLES WITH 1" SPINDLE THREADS YOU WILL NEED THE PH2165 CONVERSION KIT (NOT INCLUDED) ADDITIONAL AXLE(S) BRAKE KIT PG1044 (NOT INCLUDED) INCLUDES: 2 x BEARING 1-1/4" UFP 2 x BEARING 1-3/4" UFP (25580) 2 x SEAL 1-3/4" UFP (21333) 1 x BEARING PROTECTOR SET SS 2.717 1 x PG1096 DEMCO ACTUATOR DISC #20000 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 8' 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 23' 2 x PG2028-1 DISC ROTOR AND HUB 12" 8-LUG UFP 1 x CALIPER FITTING PLUG UFP #32212 1 x PL2142 5-WAY FULL GROUND WIRE HARNESS 40' 1 x PG5003 DISC BRAKE CALIPER ASSEMBLY LH UFP DB3 (DOUBLE BANJO FITTING) 1 x PG5005 DISC BRAKE CALIPER ASSEMBLY RH UFP DB3 (DOUBLE BANJO FITTING) 4 x DISC CALIPER BOLT 7/16" x 1" SHCS (UFP) 6 x PLASTIC WIRE TIE HD 14-1/2" 2 x CHAIN W/ ONE HOOK 40" 4 x CAPSCREW PLATED NC 1/2" x 4-1/2" GR5 4 x NUT LOCK NI 1/2-13 PLATED OWNERS MANUAL

$2099.95

PG1040 ADDITIONAL AXLE 5-LUG DISC BRAKE KIT (DEXTER / UFP)

REPRESENTATION PHOTO IF YOU WANT TO ADD BRAKES TO A TRAILER THAT WAS NEVER EQUIPPED WITH THEM, MAKE SURE THERE IS AT LEAST FOUR-INCHES OF CLEARANCE FROM THE BRAKE MOUNTING PLATE ON THE AXLE OR TORSION ARM TO THE OUTSIDE EDGE OF THE FRAME. MAGIC TILT BRAKE KIT ~ PG1040 COMES WITH PG4856 DOUBLE BANJO FITTING TO CONNECT BRAKE LINES. UFP SPINDLE MOUNTING HARDWARE (NOT INCLUDED): PH2125 IF USING ON NON-UFP AXLES WITH 1" SPINDLE THREADS YOU WILL NEED THE PH2160 CONVERSION KIT (NOT INCLUDED) INCLUDES: 2 x BEARING 1-1/16" (44649) 2 x BEARING 1-3/8" (68149) 2 x SEAL 1-3/8" UFP (257-168) 1 x BEARING PROTECTOR SET SS 1.980 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 4' 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 8' 2 x PG2026-1 DISC ROTER AND HUB 10" 5-LUG UFP 1 x CALIPER FITTING PLUG UFP #32212 1 x PG5003 DISC BRAKE CALIPER ASSEMBLY LH UFP DB3 (DOUBLE BANJO FITTING) 1 x PG5005 DISC BRAKE CALIPER ASSEMBLY RH UFP DB3 (DOUBLE BANJO FITTING) 4 x DISC CALIPER BOLT 7/16" x 1" SHCS (UFP) 6 x PLASTIC WIRE TIE HD 14-1/2" OWNERS MANUAL

$647.95

PG1042 ADDITIONAL AXLE 6-LUG DISC BRAKE KIT (DEXTER / UFP)

REPRESENTATION PHOTO IF YOU WANT TO ADD BRAKES TO A TRAILER THAT WAS NEVER EQUIPPED WITH THEM, MAKE SURE THERE IS AT LEAST FOUR-INCHES OF CLEARANCE FROM THE BRAKE MOUNTING PLATE ON THE AXLE OR TORSION ARM TO THE OUTSIDE EDGE OF THE FRAME. MAGIC TILT BRAKE KIT ~ PG1042 COMES WITH PG4856 DOUBLE BANJO FITTING TO CONNECT BRAKE LINES. UFP SPINDLE MOUNTING HARDWARE (NOT INCLUDED): PH2130 IF USING ON NON-UFP AXLES WITH 1" SPINDLE THREADS YOU WILL NEED THE PH2165 CONVERSION KIT (NOT INCLUDED) INCLUDES: 2 x BEARING 1-1/4" 2 x BEARING 1-3/4" (25580) 2 x SEAL 1-3/4" UFP (21333) 2 x PF1101 STAINLESS BEARING PROTECTOR 2.441" 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 4' 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 8' 2 x PG2027-1 DISC ROTER AND HUB 12" 6-LUG UFP 1 x CALIPER FITTING PLUG UFP #32212 1 x PG5003 DISC BRAKE CALIPER ASSEMBLY LH UFP DB3 (DOUBLE BANJO FITTING) 1 x PG5005 DISC BRAKE CALIPER ASSEMBLY RH UFP DB3 (DOUBLE BANJO FITTING) 4 x DISC CALIPER BOLT 7/16" x 1" SHCS (UFP) 6 x PLASTIC WIRE TIE HD 14-1/2" OWNERS MANUAL

$849.95

PG1044 ADDITIONAL AXLE 8-LUG DISC BRAKE KIT (DEXTER / UFP)

REPRESENTATION PHOTO IF YOU WANT TO ADD BRAKES TO A TRAILER THAT WAS NEVER EQUIPPED WITH THEM, MAKE SURE THERE IS AT LEAST FOUR-INCHES OF CLEARANCE FROM THE BRAKE MOUNTING PLATE ON THE AXLE OR TORSION ARM TO THE OUTSIDE EDGE OF THE FRAME. MAGIC TILT BRAKE KIT ~ PG1044 COMES WITH PG4856 DOUBLE BANJO FITTING TO CONNECT BRAKE LINES. UFP SPINDLE MOUNTING HARDWARE (NOT INCLUDED): PH2130 IF USING ON NON-UFP AXLES WITH 1" SPINDLE THREADS YOU WILL NEED THE PH2165 CONVERSION KIT (NOT INCLUDED) INCLUDES: 2 x BEARING 1-1/4" 2 x BEARING 1-3/4" (25580) 2 x SEAL 1-3/4" UFP (21333) 2 x BEARING PROTECTOR 2.328 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 4' 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 8' 1 x PG2028-1 DISC ROTER AND HUB 12" 8-LUG UFP 2 x CALIPER FITTING PLUG UFP #32212 1 x PG5003 DISC BRAKE CALIPER ASSEMBLY LH UFP DB3 (DOUBLE BANJO FITTING) 1 x PG5005 DISC BRAKE CALIPER ASSEMBLY RH UFP DB3 (DOUBLE BANJO FITTING) 4 x DISC CALIPER BOLT 7/16" x 1" SHCS (UFP) 6 x PLASTIC WIRE TIE HD 14-1/2" OWNERS MANUAL

$809.95

PG1070 ~ BRAKE ACTUATOR 7.5K DISC DEXTER DX7.5 (K99-175-20)

REPRESENTATION PHOTO MAGIC TILT BRAKE ACTUATOR ~ PG1070 EQUIPPED "DROP-N-GO" COUPLER AND ELECTRIC REVERSE SOLENOID REQUIRES THREE PY0270 1/2" x 4-1/2" PLATED BOLTS AND FASTENERS (NOT INCLUDED) SEE SECOND IMAGE FOR MOUNT HOLE LOCATIONS

$471.95

PG1072 ~ BRAKE ACTUATOR 7K DISC DEMCO DA70 (8705101)

REPRESENTATION PHOTO MAGIC TILT BRAKE ACTUATOR ~ PG1072 EQUIPPED WITH E-Z LATCH COUPLER AND ELECTRIC REVERSE SOLENOID REQUIRES THREE PY0270 1/2" x 4-1/2" PLATED BOLTS AND FASTENERS (NOT INCLUDED) SEE SECOND IMAGE FOR MOUNT HOLE LOCATIONS REPLACEMENT EMERGENCY CABLE PG4832 OWNERS MANUAL

$343.95

PG1075 ~ BRAKE LOCKOUT PLUG A60/75 ACTUATORS DEXTER / UFP

REPRESENTATION PHOTO MAGIC TILT BRAKE LOCKOUT PLUG ~ PG1075 CAUTION! IF LOCKOUT IS NOT REMOVED DURING NORMAL TOWING THE TRAILER'S BRAKES WILL NOT FUNCTION. CUSTOMER ASSUMES RESPONSIBILITY FOR SAFE USAGE. ALLOWS TRAILERS WITH DEXTER / UFP IN-LINE SURGE DISC BRAKES TO BE BACKED UP WHILE NOT PLUGGED INTO THE VEHICLE. WORKS WITH ALL UFP A60/75 7.5K IN-LINE DISC BRAKE ACTUATORS. FOR A-160 16K ACTUATORS, USE THE PG1090-1 CLIP OWNERS MANUAL

PG1090 ~ BRAKE ACTUATOR 7.5K IN-LINE DISC DEXTER / UFP (A-60, A-75)

REPRESENTATION PHOTO MAGIC TILT BRAKE ACTUATOR ~ PG1090 BALL SIZE" 2" FOR 3x4 AND 3x5 TONGUES ONLY USE PG1091 FOR 3x3 TONGUES REPLACEMENT EMERGENCY CABLE PG4812 BRAKE LOCKOUT PLUG PG1075 HOW TO RELEASE THE EMERGENCY BRAKE CABLE IN TRAILER KNOWLEDGE OWNERS MANUAL

$399.95

PG1090-1 ~ BRAKE LOCKOUT CLIP A-160 ACTUATOR DEXTER / UFP

REPRESENTATION PHOTO MAGIC TILT BRAKE LOCKOUT CLIP ~ PG1090-1 CAUTION! IF LOCKOUT IS NOT REMOVED DURING NORMAL TOWING THE TRAILER'S BRAKES WILL NOT FUNCTION. CUSTOMER ASSUMES RESPONSIBILITY FOR SAFE USAGE. ALLOWS TRAILERS WITH DEXTER / UFP 16K IN-LINE SURGE DISC BRAKES TO BE BACKED UP WHILE NOT PLUGGED INTO THE VEHICLE. DESIGED TO SLIP BETWEEN HOUSING AND COUPLER TO FILL THE TRAVEL SLOT.

$6.95

PG1094 ~ BRAKE ACTUATOR 16K DISC DEMCO DA16 (8164311)

REPRESENTATION PHOTO MAGIC TILT BRAKE ACTUATOR ~ PG1094 SEE SECOND IMAGE FOR MOUNT HOLE LOCATIONS EQUIPED WITH E-Z LATCH COUPLER AND ELECTRIC REVERSE SOLENOID REQUIRES THREE PY0270 1/2" x 4-1/2" PLATED BOLTS AND FASTENERS (NOT INCLUDED) REPLACEMENT EMERGENCY BRAKE CABLE PG4832 OWNERS MANUAL

$692.95

PG1095 ~ BRAKE ACTUATOR 16K DISC DEXTER / UFP (A-160)

REPRESENTATION PHOTO MAGIC TILT BRAKE ACTUATOR ~ PG1095 REPLACEMENT EMERGENCY BRAKE CABLE PG4827 BRAKE LOCKOUT CLIP PG1090-1 HOW TO RELEASE THE EMERGENCY BRAKE CABLE IN TRAILER KNOWLEDGE OWNERS MANUAL

$908.95

PG1096 ~ BRAKE ACTUATOR 20K DISC DEMCO DA20 (8204311)

REPRESENTATION PHOTO MAGIC TILT BRAKE ACTUATOR ~ PG1096 SEE SECOND IMAGE FOR MOUNT HOLE LOCATIONS REPLACEMENT EMERGENCY BRAKE CABLE PG4832 OWNERS MANUAL

$919.95

PG1097 ~ BRAKE ACTUATOR 20K DISC DEXTER / TIE-DOWN DZ20

REPRESENTATION PHOTO MAGIC TILT BRAKE ACTUATOR ~ PG1097 SEE SECOND IMAGE FOR MOUNT HOLE LOCATIONS REPLACEMENT EMERGENCY BRAKE CABLE PG QUICK-LOCK DROP-N-GO COUPLER. COUPLER IN CLOSED POSITON WILL LOCK ON THE BALL. ALUMINUM MASTER CYLINDER DUAL SHOCK DAMPENERS OWNERS MANUAL

$1060.95

PG1166 ~ BRAKE LINE COUPLER

REPRESENTATION PHOTO MAGIC TILT BRAKE LINE COUPLER ~ PG1166

PG1175 ~ HYDRAULIC BRAKE T-FITTING

REPRESENTATION PHOTO MAGIC TILT HYDRAULIC BRAKE T-FITTING ~ PG1175

$9.95

PG1326-1

21' BRAKE LINE KIT, DOUBLE BANJO

$135.00

PG1332 ~ BRAKE LINE KIT TO ADD SECOND AXLE SINGLE-BANJO

REPRESENTATION PHOTO MAGIC TILT BRAKE LINE KIT SECOND AXLE ~ PG1332 INCLUDES: 2 x PG1175 T-FITTINGS 2 x PG1178 1' BRAKE HOSE WITH SWIVEL 1 x PG1182 4' BRAKE HOSE WITH SWIVEL 1 x PG1183 6' 6" BRAKE HOSE WITH SWIVEL 6 x PL2954 14-1/2" PLASTIC WIRE TIES

$123.95

PG1332-1 ~ BRAKE LINE KIT TO ADD SECOND AXLE DOUBLE-BANJO

REPRESENTATION PHOTO MAGIC TILT BRAKE LINE KIT SECOND AXLE ~ PG1332-1 INCLUDES: 1 x PG4862 BRAKE CALIPER FITTING PLUG 1 x PG1182 4' BRAKE HOSE WITH SWIVEL 1 x PG1186 8' BRAKE HOSE WITH SWIVEL 6 x PL2954 14" PLASTIC WIRE TIES

$123.95

PG1334 ~ BRAKE LINE KIT TO ADD SECOND & THIRD AXLES SINGLE-BANJO

REPRESENTATION PHOTO MAGIC TILT BRAKE LINE KIT SECOND & THIRD AXLE ~ PG1334 INCLUDES: 4 x PG1175 T-FITTING 3 x PG1178 1' BRAKE HOSE WITH SWIVEL 2 x PG1182 4' BRAKE HOSE WITH SWIVEL 2 x PG1183 6' 6" BRAKE HOSE WITH SWIVEL 12 x PL2954 14" PLASTIC WIRE TIE

$228.95

PG1334-1 ~ BRAKE LINE KIT TO ADD SECOND & THIRD AXLES DBL-BANJO

REPRESENTATION PHOTO MAGIC TILT BRAKE LINE KIT SECOND & THIRD AXLE ~ PG1334-1 INCLUDES: 1 x PG4862 CALIPER FIITING PLUG 2 x PG1182 4' BRAKE HOSE WITH SWIVEL 2 x PG1186 8' BRAKE HOSE WITH SWIVEL 12 x PL2954 14" PLASTIC WIRE TIE

$228.95

PG2032

DISC BRAKE ROTOR KIT 10" 5L [NO CAL] EA. - UFP

$121.54

PG2035 DISC BRAKE ASSEMBLY 8-LUG (DEXTER / UFP)

$674.95

PG2070-L ~ DISC BRAKE ASSEMBLY 5-LUG GREASED (DEXTER / UFP)

To Add brakes to a trailer that was never equipped with them, Confirm there is At least four-inches of clearance from the brake mounting plate on the axle or torsion arm to the outside edge of the frame. Magic Tilt Brake Assembly ~ PG2070-L Good to know: - Bearings, Races and seals are installed in rotors and greased (Ready-To-Go). - 2 x PE2050 Replacement Seals are in the box (Loose) To accomodate non-UFP spindles if needed. Customer is responsible for determination. - Ships with PG4856 Double banjo fittings to connect brake lines. - Includes UFP hub mounting hardware. If using on non-UFP axles with 1" Spindle Threads you'll also need the PH2160 Conversion Kit (Not Included). Included in this kit: 10 x PD2250 Lug Nut 13/16" 2 x PE1400 Bearing 1-1/16" (44649) - Installed 2 x PE1450 Bearing 1-3/8" (68149) - Installed 2 x PE2055 Seal 2.57" x 1.68" UFP (257-168) - Installed 2 x PF1054 Bearing Protector SS 1.980 2 x PF1060 Bearing Protector Bra 1.980 2 x PG2026-1 Disc Rotor And Hub 10" 5-Lug Plated UFP 1 x PG5003 Disc brake caliper assembly LH UFP db3 (Double Banjo Fitting) 1 x PG5005 Disc brake caliper assembly RH UFP db3 (Double Banjo Fitting) 4 x PG5007 Disc Caliper Bolt 7/16" x 1" Shcs (UFP) 2 x PH2012 Cotter Pin 1/8" x 1-1/4" Plated UFP 1 x PG4862 Caliper Fitting Plug Brass 2 x PH1980 Spindle Nut 13/16" UFP 2 x PH2108 Spindle Nut Retainer UFP 2 x PH2065 Axle D-Washer 3/4" x 3/32" UFP 2 x PE2050 Seal 2.55" x 1.71" Non-UFP - Loose Owners Manual

$539.95

PG2071-L ~ DISC BRAKE ASSEMBLY 6-LUG GREASED (DEXTER / UFP)

REPRESENTATION PHOTO IF YOU WANT TO ADD BRAKES TO A TRAILER THAT WAS NEVER EQUIPPED WITH THEM, MAKE SURE THERE IS AT LEAST FOUR-INCHES OF CLEARANCE FROM THE BRAKE MOUNTING PLATE ON THE AXLE OR TORSION ARM TO THE OUTSIDE EDGE OF THE FRAME. MAGIC TILT DISC BRAKE ASSEMBLY ~ PG2071-L - BEARINGS, RACES AND SEALS ARE INSTALLED IN ROTORS AND GREASED (READY-TO-GO). - 2 x PE2100 REPLACEMENT SEALS ARE INCLUDED (LOOSE) TO ACCOMODATE NON-UFP SPINDLES IF NEEDED. CUSTOMER IS RESPONSIBLE FOR DETERMINATION. - COMES WITH PG4856 DOUBLE BANJO FITTING TO CONNECT BRAKE LINES. - INCLUDES UFP HUB MOUNTING HARDWARE. IF USING ON NON-UFP AXLES WITH 1" SPINDLE THREADS YOU WILL NEED THE PH2165 CONVERSION KIT (NOT INCLUDED). INCLUDES: 12 x PD2250 LUG NUT 13/16" 2 x PE1550 BEARING 1-1/4" (15123) - INSTALLED 2 x PE1600 BEARING 1-3/4" (25580) - INSTALLED 2 x PE2101 SEAL 3.37" x 2.13" UFP (21333) - INSTALLED 2 x PF1101 BEARING PROTECTOR SS 2.441" 2 x PF1063 BEARING PROTECTOR BRA 2.441" 2 x PG2027-1 DISC ROTOR AND HUB 12" 6-LUG PLATED UFP 1 x PG500 3 DISC BRAKE CALIPER ASSEMBLY LH UFP DB3 (DOUBLE BANJO FITTING) 1 x PG5005 DISC BRAKE CALIPER ASSEMBLY RH UFP DB3 (DOUBLE BANJO FITTING) 4 x PG5007 DISC CALIPER BOLT 7/16" x 1" SHCS (UFP) 2 x PH2012 COTTER PIN 1/8" x 1-1/4" PLATED UFP 1 x PG4862 CALIPER FITTING PLUG BRASS 2 x PH1980 SPINDLE NUT 13/16" UFP 2 x PH2108 SPINDLE NUT RETAINER UFP 2 x PH2066 AXLE D-WASHER 3/4" x 3/16" UFP 2 x PE2100 SEAL 3.37" x 2.23" NON-UFP - LOOSE OWNERS MANUAL

$699.95

PG2100 ~ BRAKE FLANGE WELD-ON 4-BOLT

REPRESENTATION PHOTO MAGIC TILT BRAKE FLANGE ~ PG2100 FOR USE ON 3500 POUND SPRING AXLES

PG2150 ~ BRAKE FLANGE WELD-ON 5-BOLT

REPRESENTATION PHOTO MAGIC TILT BRAKE FLANGE ~ PG2150

$11.95

PG2252 ~ REVERSE LOCKOUT SOLENOID

REPRESENTATION PHOTO MAGIC TILT REVERSE LOCKOUT SOLENOID ~ PG2252 CAN BE USED WHEN CONVERTING A DRUM ACTUATOR FOR DISC BRAKE USE. MAY SHIP FROM STORE LOCATION

$94.50

PG3052 ~COUPLER LATCH REPAIR KIT DEXTER / TITAN 4358400

REPRESENTATION PHOTO MAGIC TILT LEVER LOCK REPAIR KIT ~ PG3052 COUPLER REPAIR KIT FOR DEXTER / TITAN MODEL 60 COUPLERS AND BRAKE ACTUATORS

$90.95

PG3056 ~ BREAKAWAY LEVER ASSEMBLY DEXTER / TITAN MODEL 60 (068-188-00)

REPRESENTATION PHOTO MAGIC TILT DISC BRAKE BREAKAWAY LEVER ASSEMBLY : OLD PART NUMBER 43595 INCLUDES: BREAKAWAY CABLE AND HOOK MAY COME WTH S-HOOK

$21.95

PG3216 ~ BREAKAWAY LEVER DEXTER / TITAN 068-017-00

REPRESENTATION PHOTO MAGIC TILT DISC BRAKE BREAKAWAY LEVER ASSEMBLY ~ PG3216 : REPLACES OLD PART NUMBER 1054100 CABLE SOLD SEPERATELY

$32.95

PG3229 ~ TEKONSHA ELECTRIC BRAKE CONTROLLER

REPRESENTATION PHOTO MAGIC TILT ELECTRIC BRAKE CONTOLLER ~ PG3229

$236.95

PG4814-1 ~ MASTER CYLINDER NEW STYLE DEXTER / UFP

REPRESENTATION PHOTO MAGIC TILT MASTER CYLINDER ~ PG4814-1 THIS IS THE "NEW-STYLE" REPLACEMENT MASTER CYLINDER FOR ALMOST EVERY SURGE ACTUATOR MADE BY UFP (NOW DEXTER). IT REPLACES THE OLD-STYLE MASTER CYLINDER THAT HAD THE REVERSE SOLENOID THREADED IN THE BACK OF THE HOUSING. THIS STYLE INCLUDES THE NEW PG4815-1 DROP-IN SOLENOID.

$134.95

PG4827 ~ BREAKAWAY CABLE TOP MOUNT DEXTER/UFP A-160

REPRESENTATION PHOTO MAGIC TILT BREAWAY CABLE ~ PG4827

$23.95

PG4832 ~ BREAKAWAY CABLE TOP MOUNT DEMCO

REPRESENTATION PHOTO MAGIC TILT BREAWAY CABLE ~ PG4832

$34.95

PG4849 ~ DISC BRAKE PAD DEXTER / UFP 1-PAD ONLY

REPRESENTATION PHOTO MAGIC TILT BRAKE PAD ~ PG4849 SOLD INDIVIDUALLY CONTAINS ONLY ONE BRAKE PAD. ORDER TWO TO OUTFIT ONE CALIPER. CAN ONLY BE USED ON DEXTER/UFP BRAKE SYSTEMS

$19.95

PG4855 ~ SINGLE BANJO FITTING

REPRESENTATION PHOTO MAGIC TILT SINGLE BANJO FITTING ~ PG4855 REQUIRES TWO COPPER WASHERS (PG4858) AND ONE BANJO BOLT (PG4857)

PG4856 ~ DOUBLE BANJO FITTING

REPRESENTATION PHOTO MAGIC TILT DOUBLE BANJO FITTING ~ PG4856 REQUIRES TWO COPPER WASHERS (PG4858) AND ONE BANJO BOLT (PG4857)

PG4858 ~ COPPER WASHER BANJO FITTING (UFP)

REPRESENTATION PHOTO MAGIC TILT BANJO WASHER ~ PG4858 USE WITH: SINGLE BANJO FITTING PG4855 OR DOUBLE BANJO FITTING PG4856 BANJO BOLT PG4857

$1.52

PG4859 ~ CALIPER BLEEDER SCREW (DEXTER / UFP)

REPRESENTATION PHOTO MAGIC TILT BLEEDER SCREW ~ PG4859

PG4862 ~ CALIPER FITTING PLUG (UFP)

REPRESENTATION PHOTO MAGIC TILT FITTING PLUG ~ PG4862 SOLD INDIVIDUALLY USE TO PLUG UNNEEDED PORTS ON DOUBLE BANJO FITTINGS

PG5007 ~ DISC CALIPER BOLT 7/16" x 1" DEXTER / UFP

REPRESENTATION PHOTO MAGIC TILT CALIPER BOLT ~ PG5007 USES 3/8" ALLEN WRENCH