Search Results

UFP DEALER LOCKOUT

DEALER LOCKOUT -6K/7K

10" Disc Brake Assemblies

Stainless Steel

BEARING 1-1/16" [44649] qty2 BEARING 1-3/8" [68149] qty2 SEAL 1-3/8"[UFP][257-168] qty2 BEARING PROTECTOR SET S/S #1.980 qty1 DISC ROTOR AND HUB S/S 10" 5L [UFP] qty2 DISC BRAKE CALIPER S/S LH [UFP DB35 qty1 DISC BRAKE CALIPER S/S RH [UFP DB35 qty1 7/16"X1"SHCS BOLT [UFP DISC CALIPER qty4 COTTER PIN 1/8"X1-1/4"[UFP AXLE] qty2

10" Disc Rotors

DISC ROTOR 10" 5LUG [UFP]

12" Disc Brake Assemblies

2 sizes available

BEARING 1-1/4" [67048] qty2 BEARING 1-3/4" [25580] qty2 SEAL 1-3/4"[UFP][21333] qty2 BEARING PROTECTOR SET #2.717 qty1 DISC ROTOR AND HUB S/S 12" 8L [UFP] qty2 DISC BRAKE CALIPER S/S LH [UFP DB35 qty1 DISC BRAKE CALIPER S/S RH [UFP DB35 qty1 7/16"X1"SHCS BOLT [UFP DISC CALIPER qty4 COTTER PIN 1/8"X1-1/4"[UFP AXLE] qty2

2" x 2" 93" Track 76"SC Straight Spring Axles

2 sizes available

2"x2" 93" Track 75"SC "V" Spring Axles

5 sizes available

2"x2" 93" Track 75"SC Straight Spring Axles

2 sizes available

2"x2" 93" Track 76" SC "V" Spring Axles

3 sizes available

2"x2" 93" Track 77"SC Straight Spring Axles

2 sizes available

2"x2" 71" Track 57-3/8"SC Straight Spring Axles

4 sizes available

2"x2" 81.5" Track 68-3/8" SC "V" Spring Axles

3 sizes available

2"x2" 84" Track 67" SC "V" Spring Axles

3 sizes available

2"x2" 84" Track 67" SC Straight Axles

2X2X84TR 67SC 5L HD W/BRK. FLANG

2"x2" 84" Track 68" SC "V" Spring Axles

2X2X84TR 68SC 5LHD

2"x2" 84" Track 68"SC Straight Spring Axles

2 sizes available

2"x2" 86.5" Track 77 3/8"SC Straight Spring Axles

3 sizes available

2"x2" 86.5"Track 73-3/8"SC "V" Spring Axles

2 sizes available

2"x2" 87" Track 73-3/8"SC "V" Spring Axles

2 sizes available

2"x2" 88" Track 73-3/8"SC Straight Spring Axles

2 sizes available

2"x2" 91"Track 73"SC "V" Spring Axles

2 sizes available

2"x2" 91"Track 73"SC Straight Axles

2 sizes available

2"x2" 93.5" Track 80-3/8"SC Straight Spring Axles

3 sizes available

2"x2" 93" Track 77.5" SC "V" Spring Axles

2 sizes available

2"x2" 93" Track 77.5"SC Straight Spring Axles

2X2X93TR 77.5 SC 5L HD

2"x2" 93" Track 78.5"SC "V" Spring Axles

2 sizes available

2"x2" 93"Track 77"SC "V" Spring Axles

3 sizes available

2"x2" 95" Track 78.5"SC "V" Spring Axles

2 sizes available

2"x3" 84" Track 67"SC "V" Spring Axles

3 sizes available

2"x3" 86.5" Track 73-3/8"SC "V" Spring Axles

2 sizes available

2"x3" 86" Track 67"SC "V" Spring Axles

3 sizes available

2"x3" 91" Track 73"SC "V" Spring Axles

4 sizes available

2"x3" 93.5" Track 80-3/8"SC "V" Spring Axles

2 sizes available

2"x3" 93" Track 75"SC "V" Spring Axles

5 sizes available

2"x3" 93" Track 75"SC Straight Spring Axles

2 sizes available

2"x3" 93" Track 76.5"SC "V" Spring Axles

2 sizes available

2"x3" 93" Track 76"SC "V" Spring Axles

6 sizes available

2"x3" 93" Track 78.5"SC "V" Spring Axles

2 sizes available

2"x3" 93" Track 80-3/8"SC Straight Spring Axles

2 sizes available

2"x3" 93" Track 86"SC Straight Spring Axles

2 sizes available

2"x3" 95" Track 76"SC "V" Spring Axles

2 sizes available

3-1/2" x 3-1/2" 79"FW Straight Torsion Axles

3 sizes available

3-1/2" x 3-1/2" 79"FW "V" Torsion Axles

3 sizes available

3" x 3" 69"FW Straight Torsion Axles

2 sizes available

3" x 3" 70"FW "V" Torsion Axles

2 sizes available

3" x 3" 70"FW Straight Torsion Axles

2 sizes available

3" x 3" 76"FW "V" Torsion Axles

2 sizes available

3" x 3" 76"FW Straight Torsion Axles

2 sizes available

3" x 3" 79"FW "V" Torsion Axles

3 sizes available

3" x 3" 79"FW Straight Torsion Axles

2 sizes available

3" x 3" FW 86" Straight Torsion Axles

AX[STR]3X3 W/5LUG 86FRM ASSY

5 Lug Hubs

HUB W/RACE 1-1/16"X1-1/16" 5L

5Lug Hub Assemblies

HUB ASSY 1-3/8X1-1/16 5L

6Lug Hub Assemblies

2 sizes available

6Lug Hub Assemblies (Copy)

2 sizes available

8Lug Hub Assemblies

2 sizes available

Actuator Components

2 sizes available

Actuator Cover Plate

BRAKE LOCKOUT CAP-UFP

Actuators for 3" Tongues, In-Line

6K# 3HOLE ACTUATOR

Actuators for 3" Tongues, In-Line W/Swing

6K# ACTUATOR W/SWING

Actuators for 3" Tongues, In-Line W/Swing

7K# ACTUATOR W/3X4 SWING ASSY

Bearing Kits & Conversion Kits

HD 1-3/4"X1-1/4" UFP

Kit Includes: Part Description Qty PE1550 BEARING HD 1-1/4" [15123] 1 PE1600 BEARING 1-3/4" [25580] 1 PE1850 RACE-HD 1-1/4" [15245] 1 PE1900 RACE 1-3/4" [25520] 1 PE2101 SEAL 1-3/4"[UFP][21333] 1 PH2012 COTTER PIN 1/8"X1-1/4"[UFP AXLE] 1

Brake Caliper Components

BRAKE LINE COUPLER

These unions are the best option to join two 3/16" brake lines together.

BRAKE PADS

UNIVERSAL BRAKE PAD (SET)

Complete axle set, pre-boxed as full axle set of 4

COTTER PINS

COTTER PIN 1/8"X1-1/4"[UFP AXLE]

DISC BRAKE ASSY 10" 5L [NO CAL] EA.

UFP

includes : PD2250 LUG NUT 13/16" qty: 5 PD1400 BEARING 1-1/16" [44649] qty: 1 PD1450 BEARING 1-3/8" [68149] qty: 1 PD2055 SEAL 1-3/8"[UFP][257-168] qty: 1 PG2026-1 DISC ROTOR & HUB 10" 5L PLTD UFP bearing protectors sold separately

DISC BRAKE ROTOR KIT 12" 6L [NO CAL] EA.

UFP

ML Series Spare Tire Mounts

2 sizes available

PD1600 ~ 5-LUG HUB ASSEMBLY 1-1/16" BEARINGS 1.38" ID SEAL GREASED (UFP)

REPRESENTATION PHOTO MAGIC TILT KUB KIT ASSEMBLY ~ PD1600 INCLUDES: 1 x HUB ZINC W/ RACES 5-LUG 5 x LUG NUT 13/16" 2 x BEARING 1-1/16" (44649) 1 x SEAL 1-1/16" UFP (198-138) 1 x DUST CAP 1" (1.980) 1 x COTTER PIN 1/8" x 1-3/4" PLATED DO YOU NEED? (NOT INCLUDED) PF1054 BEARING PROTECTOR PF1060 BRA

PD1602-L ~ 5-LUG HUB ASSEMBLY 1-1/16" BEARINGS 1.25" ID SEAL GREASED (UFP & NON-UFP)

REPRESENTATION PHOTO MAGIC TILT PRE-GREASED HUB ASSEMBLY ~ PD1602-L APPLICATION: ALL 1-1/2" x 1-1/2" AXLES USING 1-1/16" BEARINGS AND 1.25" ID SEAL (UFP AND NON-UFP) ALL 2" x 2" 1,500 TO 2,500-POUND UFP AXLES FROM 2022 ON COMES PRE-GREASED AND ASSEMBLED - READY TO USE IF YOU HAVE A 2" x 2" UFP AXLE THAT USES 1-1/16" BEARINGS A 1.38" ID SEAL, USE PD1600 HUB KIT. INCLUDES: 1 x PD1670 GALV HUB 5 x PD2250 LUG NUT 1/2" 2 x PE1400 BEARING 1-1/16" (44649) (INSTALLED) 2 x PE1710 RACE (44610) (INSTALLED) 1 x PE2010 SEAL 1.98" OD x 1.25" ID (INSTALLED) 1 x PE2301 POSI-LUBE DUST CAP 1.98" 1 x PE2311 POSI-LUBE RUBBER PLUG 1 x PH2014 COTTER PIN 1/8" x 1-3/4" PLATED DO YOU NEED? (NOT INCLUDED) PF1054 BEARING PROTECTOR PF1060 BRA

PD1602-L-100 ~ 5-LUG HUB ASSEMBLY 1-1/16" BEARINGS 1.25" ID SEAL GREASED (UFP & NON-UFP)

PALLET OF 100

PD1602-L Quantity of 100 Palletized

PD1670 ~ 5-LUG HUB WITH RACE 1-1/16" GALVANIZED

REPRESENTATION PHOTO MAGIC TILT HUB W/ RACE ~ PD1670 INCLUDES RACES ALREADY INSTALLED NOT INCLUDED BEARING PROTECTOR PF1054 AND BRA PF1060

PD1700-L ~ 5-LUG HUB ASSEMBLY 1-1/16"x1-3/8" GREASED (UFP)

Magic Tilt Pre-Greased Hub Assembly ~ PD1700-L Any Axle Using 1-1/16" x 1-3/8" Bearings and a seal with 1.68" ID Included in this kit: 1 x PD1760 Galv Hub 5 x PD2250 Lug Nut 1/2" 1 x PE1400 Bearing 1-1/16" (44649) (Installed) 1 x PE1450 Bearing 1-3/8" (68149) (Installed) 1 x PE1710 Race (44610) (Installed) 1 x PE1750 Race (68111) (Installed) 1 x PE2055 Seal 2.561" OD x 1.687" ID (Installed) 1 x PE2301 Posi-Lube Dust Cap 1.98" 1 x PE2311 Posi-Lube Rubber Plug 1 x PH2012 Cotter Pin 1/8" x 1-1/4" Plated Good to know: Comes pre-greased and assembled - ready to use Need? (sold separately) PF1054 Bearing Protector PF1060 Bra

PD1702-L ~ 5-LUG HUB ASSEMBLY 1-1/16"x1-3/8" GREASED (NON UFP)

REPRESENTATION PHOTO MAGIC TILT PRE-GREASED HUB ASSEMBLY ~ PD1702-L INCLUDES: 1 x PD1760 GALV HUB 5 x PD2250 LUG NUT 1/2" 1 x PE1400 BEARING 1-1/16" (44649) (INSTALLED) 1 x PE1450 BEARING 1-3/8" (68149) (INSTALLED) 1 x PE1710 RACE (44610) (INSTALLED) 1 x PE1750 RACE (68111) (INSTALLED) 1 x PE2050 SEAL 2.565" OD x 1.719" ID (INSTALLED) 1 x PE2301 POSI-LUBE DUST CAP 1.98" 1 x PE2311 POSI-LUBE RUBBER PLUG 1 x PH2014 COTTER PIN 1/8" x 1-3/4" PLATED COMES PRE-GREASED AND ASSEMBLED - READY TO USE DO YOU NEED? (NOT INCLUDED) PF1054 BEARING PROTECTOR PF1060 BRA

PD1702-L-100 ~ 5-LUG HUB ASSEMBLY 1-1/16"x1-3/8" GREASED (NON UFP)

PALLET OF 100

PD1760 ~ 5-LUG HUB WITH RACE 1-1/16" x 1-3/8" GALVANIZED

REPRESENTATION PHOTO MAGIC TILT HUB W/ RACE ~ PD1760 INCLUDES RACES ALREADY INSTALLED NOT INCLUDED BEARING KIT PE1152 (UFP), PE1150 (NON-UFP) BEARING PROTECTOR PF1054 AND BRA PF1060

PD1857 ~ 6-LUG HUB WITH RACE 1-1/4" x 1-3/4" GALVANIZED

REPRESENTATION PHOTO MAGIC TILT HUB WITH RACE ~ PD1857 INCLUDES RACES ALREADY INSTALLED NOT INCLUDED USE BEARING KITS PE1201 (UFP AXLES) OR PE1250 (NON-UFP AXLES) BEARING PROTECTOR PF1101 AND BRA PF1063

PD1860 ~ 8-LUG HUB WITH RACES 1-1/4" x 1-3/4" GALVANIZED

REPRESENTATION PHOTO MAGIC TILT HUB WITH RACE ~ PA1860 INCLUDES RACES ALREADY INSTALLED NOT INCLUDED USE BEARING KITS PE1256 (UFP), PE1255 (NON-UFP) BEARING PROTECTOR PF1103 AND BRA PF1063

PD1861-L ~ 8-LUG HUB ASSEMBLY 1-1/4"x1-3/4" GREASED (NON-UFP)

REPRESENTATION PHOTO MAGIC TILT PRE-GREASED HUB ASSEMBLY ~ PD1861-L ALL 6K TO 7K AXLES THAT USE A 2.23" ID SEAL AND A 1" CASTLE NUT INCLUDES: 1 x PD1860 GALV HUB W/ LONG STUDS 8 x PD2250 LUG NUT 1/2" 1 x PE1555 BEARING 1-1/4" (14125A) (INSTALLED) 1 x PE1600 BEARING 1-3/4" (25580) (INSTALLED) 1 x PE1855 RACE OUTER (14276) (INSTALLED) 1 x PE1900 RACE INNER (25520) (INSTALLED) 1 x PE2100 SEAL 3.38" OD x 2.23" ID (22333) (INSTALLED) 1 x PE2308 POSI-LUBE DUST CAP 2.717" 1 x PE2311 POSI-LUBE RUBBER PLUG 1 x PH1340 COTTER PIN 1/8" x 1-3/4" PLATED COMES PRE-GREASED AND ASSEMBLED - READY TO USE

PD2450-L ~ 6-LUG HUB ASSEMBLY 1-1/4"x1-3/4" GREASED (NON UFP)

REPRESENTATION PHOTO MAGIC TILT PRE-GREASED HUB ASSEMBLY ~ PD2450-L INCLUDES: 1 x PD1857 GALV HUB W/ LONG STUDS 6 x PD2250 LUG NUT 1/2" 1 x PE1550 BEARING 1-1/4" (15123) (INSTALLED) 1 x PE1600 BEARING 1-3/4" (25580) (INSTALLED) 1 x PE1850 RACE OUTER (15245) (INSTALLED) 1 x PE1900 RACE INNER (25520) (INSTALLED) 1 x PE2100 SEAL 3.38" OD x 2.25" ID (22333) (INSTALLED) 1 x PE2303 POSI-LUBE DUST CAP 2.441" 1 x PE2311 POSI-LUBE RUBBER PLUG 1 x PH2014 COTTER PIN 1/8" x 1-3/4" PLATED COMES PRE-GREASED AND ASSEMBLED - READY TO USE DO YOU NEED? (NOT INCLUDED) PF1101 BEARING PROTECTOR PF1063 BRA

PD2550-L ~ 6-LUG HUB ASSEMBLY 1-1/4"x1-3/4" GREASED (UFP)

REPRESENTATION PHOTO MAGIC TILT PRE-GREASED HUB ASSEMBLY ~ PD2550-L ANY AXLE USING 1-1/4" x 1-3/4" BEARINGS, A SEAL WITH 2.125" ID, PH2130 HARDWARE INCLUDES: 1 x PD1857 GALV HUB W/ 2" LONG STUDS 6 x PD2250 LUG NUT 1/2" 1 x PE1550 BEARING 1-1/4" (151123) (INSTALLED) 1 x PE1600 BEARING 1-3/4" (25580) (INSTALLED) 1 x PE1850 RACE OUTER (15245) (INSTALLED) 1 x PE1900 RACE INNER (25520) (INSTALLED) 1 x PE2101 SEAL 3.38" OD x 2.125" ID (21333) (INSTALLED) 1 x PE2303 POSI-LUBE DUST CAP 2.441" 1 x PE2311 POSI-LUBE RUBBER PLUG 1 x PH2012 COTTER PIN 1/8" x 1-1/4" PLATED COMES PRE-GREASED AND ASSEMBLED - READY TO USE

PE1100 ~ BEARING KIT 1-1/16" x 1-1/16" (NON-UFP)

REPRESENTATION PHOTO MAGIC TILT BEARING KIT ~ PE1100 USE WITH HUBS PD1360 , PD1670 , PD1660 INCLUDES: 2 x PE1400 BEARING 1-1/16" (44649) 2 x PE1710 RACE 1" OR 1-1/16" (44610) 1 x PE2010 SEAL 1-1/16" (198-125) 1 x PH2014 COTTER PIN 1/8" x 1-3/4" PLATED

PE1101 ~ BEARING KIT 1-1/16 x 1-1/16" (UFP)

REPRESENTATION PHOTO MAGIC TILT BEARING KIT ~ PE1101 USE WITH HUBS PD1670 , PD1660 INCLUDES: 2 x PE1400 BEARING 1-1/16" (44649) 2 x PE1710 RACE 1" OR 1-1/16" (44610) 1 x PE2015 SEAL 1-1/16" UFP (198-138) 1 x PH2012 COTTER PIN 1/8" x 1-1/4" UFP PLATED

PE1150 ~ BEARING KIT 1-1/16" x 1-3/8" (NON-UFP)

REPRESENTATION PHOTO MAGIC TILT BEARING KIT ~ PE1150 USE WITH HUBS PD1750 , PD1760 INCLUDES: 1 x PE1400 BEARING 1-1/16" (44649) 1 x PE1450 BEARING 1-3/8" (68149) 1 x PE1710 RACE 1" OR 1-1/16" (44610) 1 x PE1750 RACE 1-3/8" UCF (68111) 1 x PE2050 SEAL 1-3/8" (255-171) 1 x PH2014 COTTER PIN 1/8" x 1-3/4" PLATED

PE1151 ~ BEARING KIT 1-1/16" x 1-3/8" (UFP)

Magic Tilt Bearing Kit ~ PE1151 Good to know: Use with rotor/hub combinations PG2026-1 , PG2026-2, PG2024 Inner Race (PE1749) Used Exclusively In 5-Lug UFP 1-Piece Disk Brake Rotors Kit Contains: 1 x PE1400 Bearing 1-1/16" (44649) 1 x PE1450 Bearing 1-3/8" (68149) 1 x PE1710 Race 1" Or 1-1/16" (44610) 1 x PE1749 Race 1-3/8" UFP (68110) 1 x PE2055 Seal 1-3/8" UFP (257-168) 1 x PH2012 Cotter Pin 1/8" x 1-1/4" UFP

PE1152 ~ BEARING KIT 1-1/16" x 1-3/8" (UFP)

REPRESENTATION PHOTO MAGIC TILT BEARING KIT ~ PE1152 USE WITH HUBS PD1750 , PD1760 INCLUDES: 1 x PE1400 BEARING 1-1/16" (44649) 1 x PE1450 BEARING 1-3/8" (68149) 1 x PE1710 RACE 1" OR 1-1/16" (44610) 1 x PE1750 RACE 1-3/8" UCF (68111) 1 x PE2055 SEAL 1-3/8" UFP (257-168) 1 x PH2012 COTTER PIN 1/8" x 1-1/4" UFP

PE1200 ~ BEARING KIT 1-1/4" x 1-3/4" SELECT 6-LUG UFP HUBS/ROTORS

REPRESENTATION PHOTO MAGIC TILT BEARING KIT ~ PE1200 APPLICATION: - USE ROTORS PG2027-1 & PG2027-2 PRIOR TO 3/24 WITH 2.328" DUST CAPS - 5,200-POUND UFP AXLES (2"x3" SPRING AND 3-1/2" TORSION) USING SEAL WITH 2.13" INSIDE DIAMETER INCLUDES: 1 x PE1500 1-1/4" BEARING (67048) 1 x PE1600 1-3/4" BEARING (25580) 1 x PE1800 RACE (67010) 1 x PE1900 RACE (25520) 1 x PE2101 SEAL (21333) 1 x PH2012 1/8" x 1-1/4" COTTER PIN

PE1201 ~ BEARING KIT 1-1/4" x 1-3/4" SELECT 6-LUG UFP HUBS/ROTORS

REPRESENTATION PHOTO MAGIC TILT BEARING KIT ~ PE1201 APPLICATION: - USE WITH HUB PD1857 , ROTORS PG2027-1 & PG2027-2 (AFTER 3/24 WITH 2.44" DUST CAPS) ON UFP AXLES - 5,200-POUND UFP AXLES (2"x3" SPRING AND 3-1/2" TORSION) USING 2.13" INSIDE DIAMETER SEALS - SELECT 6-LUG NON-UFP HUBS (D-MAX, KODIAK, DRUM) ON UFP AXLES USING 2.13" INSIDE DIAMETER SEALS INCLUDES: 1 x PE1550 1-1/4" BEARING (15123) 1 x PE1600 1-3/4" BEARING (25580) 1 x PE1850 RACE (15245) 1 x PE1900 RACE (25520) 1 x PE2101 SEAL (21333) 1 x PH2012 1/8" x 1-1/4" COTTER PIN

PE1250 ~ BEARING KIT 1-1/4" x 1-3/4" SELECT 6-LUG NON-UFP HUBS/ROTORS

REPRESENTATION PHOTO MAGIC TILT BEARING KIT ~ PE1250 APPLICATION: - USE WITH HUB PD1857 AND ROTORS PG2027-1 & PG2027-2 (AFTER 3/24 WITH 2.44" DUST CAPS) ON NON-UFP AXLES - 5,200-POUND NON-UFP AXLES (2"x3" SPRING AND 3-1/2" TORSION) USING SEAL WITH 2.23" INSIDE DIAMETER - SELECT 6-LUG NON-UFP HUBS (D-MAX, KODIAK, DRUM) ON NON-UFP AXLES ON AXLES USING A SEAL WITH 2.23" INSIDE DIAMETER INCLUDES: 1 x PE1550 BEARING HD 1-1/4" (15123) 1 x PE1600 BEARING 1-3/4" (25580) 1 x PE1850 RACE HD 1-1/4" (15245) 1 x PE1900 RACE 1-3/4" (25520) 1 x PE2100 SEAL 1-3/4" (22333) 1 x PH2014 COTTER PIN 1/8" x 1-3/4" PLATED

PE1255 ~ BEARING KIT 1-1/4" x 1-3/4" 8-LUG NON-UFP HUBS

REPRESENTATION PHOTO MAGIC TILT BEARING KIT ~ PE1255 USE WITH 8-LUG HUB PD1860 OR ROTORS PG2028-1 AND PG2028-2 ON NON-UFP AXLES INCLUDES: 1 x PE1555 BEARING 1-1/4" (14125A) 1 x PE1600 BEARING 1-3/4" (25580) 1 x PE1855 RACE 1-1/4" 8-LUG (14276) 1 x PE1900 RACE 1-3/4" (25520) 1 x PE2100 SEAL 1-3/4" (22333) 1 x PH2014 COTTER PIN 1/8" x 1-3/4" PLATED

PE1256 ~ BEARING KIT 1-1/4" x 1-3/4" 8-LUG UFP HUBS

REPRESENTATION PHOTO MAGIC TILT BEARING KIT ~ PE1256 USE WITH 8-LUG HUB PD1860 OR ROTORS PG2028-1 AND PG2028-2 ON UFP AXLES INCLUDES: 1 x PE1555 BEARING 1-1/4" (14125A) 1 x PE1600 BEARING 1-3/4" (25580) 1 x PE1855 RACE 1-1/4" 8-LUG (14276) 1 x PE1900 RACE 1-3/4" (25520) 1 x PE2101 UFP SEAL 1-3/4" (21333) 1 x PH2012 x COTTER PIN 1/8" x 1-1/4" (UFP AXLE)

PE1850 ~ RACE 1-1/4" (15245)

REPRESENTATION PHOTO MAGIC TILT H.D. RACE ~ PE1850 SOLD INDIVIDUALLY FOR 6 LUG HEAVY DUTY NON-UFP HUBS

PE2010 ~ SEAL 1-1/16" SPINDLES NON-UFP, UFP AFTER 2019 (125-198)

REPRESENTATION PHOTO MAGIC TILT GREASE SEAL ~ PE2010 SOLD INDIVIDUALLY APPLICATION: USED ON NON-UFP 1,500 TO 2,500 POUND AXLES WITH 1-1/6" X 1-1/16" SPINDLES USED ON UFP 1,500 TO 2,500 POUND AXLES WITH 1-1/6" X 1-1/16" SPINDLES AFTER 2019 FOR UFP 1,500 TO 2,500 POUND AXLES PRIOR TO 2020, USE SEAL PE2015

PE2015 ~ SEAL 1-1/16" SPINDLES UFP BEFORE 2020 (138-198)

REPRESENTATION PHOTO MAGIC TILT GREASE SEAL ~ PE2015 SOLD INDIVIDUALLY UFP 2", 2.5K AXLES BUILT AFTER MID 2019 USE THE PE2010 SEAL WITH 1.25" INSIDE DIAMETER. MEASURE THE SPINDLE SURFACE FOR THE SEAL BEFORE ORDERING.

PE2050 ~ SEAL 1-3/8" NON-UFP (171-255)

REPRESENTATION PHOTO MAGIC TILT GREASE SEAL ~ PE2050 SOLD INDIVIDUALLY

PE2055 ~ SEAL 1-3/8" UFP (168-257)

REPRESENTATION PHOTO MAGIC TILT GREASE SEAL ~ PE2055 SOLD INDIVIDUALLY

PE2100 ~ SEAL 1-3/4" NON-UFP (22333)

REPRESENTATION PHOTO MAGIC TILT GREASE SEAL ~ PE2100 SOLD INDIVIDUALLY FOR USE ON 4 x 4 TORSION AXLES

PE2101 ~ SEAL 1-3/4" UFP (21333)

REPRESENTATION PHOTO MAGIC TILT GREASE SEAL ~ PE2101 SOLD INDIVIDUALLY

PE2311 ~ CENTER HOLE CAP RUBBER PLUG (POSI-LUBE)

REPRESENTATION PHOTO MAGIC TILT RUBBER PLUG FOR POSI-LUBE DUST CAPS ~ PE2311 SOLD INDIVIDUALLY FITS ALL MODERN POSI-LUBE DUST CAPS OLDER POSI-LUBE DUST CAPS FOR 6 AND 8-LUG HUBS ONCE USED A LARGER PLUG. ALL NEWER DUST CAPS USE THIS UNIVERSAL PLUG.

PG1030 COMPLETE 5-LUG DISC BRAKE KIT ≤7.5K TOP-MOUNT (DEXTER / UFP)

REPRESENTATION PHOTO IF YOU WANT TO ADD BRAKES TO A TRAILER THAT WAS NEVER EQUIPPED WITH THEM, MAKE SURE THERE IS AT LEAST FOUR-INCHES OF CLEARANCE FROM THE BRAKE MOUNTING PLATE ON THE AXLE OR TORSION ARM TO THE OUTSIDE EDGE OF THE FRAME. MAGIC TILT BRAKE KIT ~ PG1030 NEW TOP-MOUNT ACTUATOR REPLACES THE PG1088 INLINE 3-HOLE ACTUATOR ON 3" TALL TONGUES. NEW HOLES WILL NEED TO BE DRILLED IN THE TRAILER TONGUE. COMES WITH PG4856 DOUBLE BANJO FITTING TO CONNECT BRAKE LINES. UFP SPINDLE MOUNTING HARDWARE (NOT INCLUDED): PH2125 IF USING ON NON-UFP AXLES WITH 1" SPINDLE THREADS YOU WILL NEED THE PH2160 CONVERSION KIT (NOT INCLUDED). ADDITIONAL AXLE(S) BRAKE KIT PG1040 (NOT INCLUDED) INCLUDES: 2 x BEARING 1-1/16" (44649) 2 x BEARING 1-3/8" (68149) 2 x SEAL 1-3/8" UFP (257-168) 1 x BEARING PROTECTOR SET SS 1.980 1 x PG1072 ACTUATOR TOP MOUNT DISC DEMCO #7,000 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 8' 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 23' 2 x PG2026-1 DISC ROTOR AND HUB 10" 5-LUG UFP 1 x CALIPER FITTING PLUG UFP #32212 1 x PG5003 DISC BRAKE CALIPER ASSEMBLY LH UFP DB3 (DOUBLE BANJO FITTING) 1 x PG5005 DISC BRAKE CALIPER ASSEMBLY RH UFP DB3 (DOUBLE BANJO FITTING) 4 x 7/16" x 1" SHCS BOLT UFP DISC CALIPER 1 x PL2128 5-WAY FULL GROUND WIRE HARNESS 30' 6 x PLASTIC WIRE TIE HD 14-1/2" 2 x 1/4" CHAIN W/ ONE HOOK 40" 3 x CAPSCREW PLATED NC 1/2 x 4-1/2 GR5 3 x NUT LOCK NI 1/2-13 PLATED OWNERS MANUAL

PG1031 COMPLETE 5-LUG DISC BRAKE KIT ≤7.5K IN-LINE (DEXTER / UFP)

REPRESENTATION PHOTO IF YOU WANT TO ADD BRAKES TO A TRAILER THAT WAS NEVER EQUIPPED WITH THEM, MAKE SURE THERE IS AT LEAST FOUR-INCHES OF CLEARANCE FROM THE BRAKE MOUNTING PLATE ON THE AXLE OR TORSION ARM TO THE OUTSIDE EDGE OF THE FRAME. MAGIC TILT BRAKE KIT ~ PG1031 COMES WITH PG4856 DOUBLE BANJO FITTING TO CONNECT BRAKE LINES. IF USING ON NON-UFP AXLES WITH 1" SPINDLE THREADS YOU WILL NEED THE PH2160 CONVERSION KIT (NOT INCLUDED) UFP SPINDLE MOUNTING HARDWARE (NOT INCLUDED): PH2125 ADDITIONAL AXLE(S) BRAKE KIT PG1040 (NOT INCLUDED) INCLUDES: 2 x BEARING 1-1/16" (44649) 2 x BEARING 1-3/8" (68149) 2 x SEAL 1-3/8" UFP (257-168) 1 x BEARING PROTECTOR SET SS 1.980 1 x PG1090 ACTUATOR IN-LINE DISC UFP #7500 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 8' 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 23' 2 x PG2026-1 DISC ROTOR AND HUB 10" 5-LUG UFP 1 x CALIPER FITTING PLUG UFP #32212 1 x PG5003 DISC BRAKE CALIPER ASSEMBLY LH UFP DB3 (DOUBLE BANJO FITTING) 1 x PG5005 DISC BRAKE CALIPER ASSEMBLY RH UFP DB3 (DOUBLE BANJO FITTING) 4 x 7/16" x 1" SHCS BOLT UFP DISC CALIPER 1 x PL2128 5-WAY FULL GROUND WIRE HARNESS 30' 6 x PLASTIC WIRE TIE HD 14-1/2" 2 x 1/4" CHAIN W/ ONE HOOK 40" 4 x CAPSCREW PLATED NC 1/2 x 4-1/2 GR5 4 x NUT LOCK NI 1/2-13 PLATED OWNERS MANUAL

PG1033 COMPLETE 5-LUG DISC BRAKE KIT 7.5K TO 16K (DEXTER / UFP)

REPRESENTATION PHOTO IF YOU WANT TO ADD BRAKES TO A TRAILER THAT WAS NEVER EQUIPPED WITH THEM, MAKE SURE THERE IS AT LEAST FOUR-INCHES OF CLEARANCE FROM THE BRAKE MOUNTING PLATE ON THE AXLE OR TORSION ARM TO THE OUTSIDE EDGE OF THE FRAME. MAGIC TILT BRAKE KIT ~ PG1033 COMES WITH PG4856 DOUBLE BANJO FITTING TO CONNECT BRAKE LINES. UFP SPINDLE MOUNTING HARDWARE (NOT INCLUDED): PH2125 IF USING ON NON-UFP AXLES WITH 1" SPINDLE THREADS YOU WILL NEED THE PH2160 CONVERSION KIT (NOT INCLUDED) ADDITIONAL AXLE(S) BRAKE KIT PG1040 (NOT INCLUDED) INCLUDES: 2 x BEARING 1-1/16" (44649) 2 x BEARING 1-3/8" (68149) 2 x SEAL 1-3/8" UFP (257-168) 2 x BEARING PROTECTOR 1.980 STAINLESS 1 x PG1095 ACTUATOR IN-LINE DISC #16,000 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 8' 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 23' 2 x PG2026-1 DISC ROTOR AND HUB 10" 5-LUG UFP 1 x CALIPER FITTING PLUG UFP #32212 1 x PG5003 DISC BRAKE CALIPER ASSEMBLY LH UFP (DOUBLE BANJO FITTING) 1 x PG5005 DISC BRAKE CALIPER ASSEMBLY RH UFP (DOUBLE BANJO FITTING) 4 x 7/16" x 1" CALIPER BOLT UFP 1 x PL2128 5-WAY HARNESS 30' 6 x PLASTIC WIRE TIE HD 14-1/2" 2 x 1/4" CHAIN W/ ONE HOOK 40" 4 x CAPSCREW PLATED NC 1/2 x 4-1/2 GR5 4 x NUT LOCK NI 1/2-13 PLATED OWNERS MANUAL

PG1037 COMPLETE 6-LUG DISC BRAKE KIT 10K TO 16K (DEXTER / UFP)

REPRESENTATION PHOTO IF YOU WANT TO ADD BRAKES TO A TRAILER THAT WAS NEVER EQUIPPED WITH THEM, MAKE SURE THERE IS AT LEAST FOUR-INCHES OF CLEARANCE FROM THE BRAKE MOUNTING PLATE ON THE AXLE OR TORSION ARM TO THE OUTSIDE EDGE OF THE FRAME. MAGIC TILT BRAKE KIT ~ PG1037 COMES WITH PG4856 DOUBLE BANJO FITTING TO CONNECT BRAKE LINES. UFP SPINDLE MOUNTING HARDWARE (NOT INCLUDED): PH2130 IF USING ON NON-UFP AXLES WITH 1" SPINDLE THREADS YOU WILL NEED THE PH2165 CONVERSION KIT (NOT INCLUDED) ADDITIONAL AXLE(S) BRAKE KIT PG1042 (NOT INCLUDED) INCLUDES: 2 x BEARING 1-1/4" UFP 2 x BEARING 1-3/4" UFP (25580) 2 x SEAL 1-3/4" UFP (21333) 2 x PF1101 STAINLESS BEARING PROTECTOR 2.441" 1 x PG1095 ACTUATOR DISC UFP #16,000 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 8' 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 23' 2 x PG2027-1 DISC ROTOR AND HUB 12" 6-LUG UFP 1 x CALIPER FITTING PLUG UFP #32212 1 x PG5003 DISC BRAKE CALIPER ASSEMBLY LH UFP DB3 (DOUBLE BANJO FITTING) 1 x PG5005 DISC BRAKE CALIPER ASSEMBLY RH UFP DB3 (DOUBLE BANJO FITTING) 4 x DISC CALIPER BOLT 7/16" x 1" SHCS (UFP) 1 x PL2128 5-WAY FULL GROUND WIRE HARNESS 30' 6 x PLASTIC WIRE TIE HD 14-1/2" 2 x CHAIN W/ ONE HOOK 40" 4 x CAPSCREW PLATED NC 1/2" x 4-1/2" GR5 4 x NUT LOCK NI 1/2-13 PLATED OWNERS MANUAL

PG1038 COMPLETE 8-LUG DISC BRAKE KIT 12K TO 20K (DEXTER / UFP)

REPRESENTATION PHOTO IF YOU WANT TO ADD BRAKES TO A TRAILER THAT WAS NEVER EQUIPPED WITH THEM, MAKE SURE THERE IS AT LEAST FOUR-INCHES OF CLEARANCE FROM THE BRAKE MOUNTING PLATE ON THE AXLE OR TORSION ARM TO THE OUTSIDE EDGE OF THE FRAME. MAGIC TILT BRAKE KIT ~ PG1038 TANDEM 8,000-POUND (8-LUG) AXLE TRAILERS COMES WITH PG4856 DOUBLE BANJO FITTING TO CONNECT BRAKE LINES. UFP SPINDLE MOUNTING HARDWARE (NOT INCLUDED): PH2130 IF USING ON NON-UFP AXLES WITH 1" SPINDLE THREADS YOU WILL NEED THE PH2165 CONVERSION KIT (NOT INCLUDED) ADDITIONAL AXLE(S) BRAKE KIT PG1044 (NOT INCLUDED) INCLUDES: 2 x BEARING 1-1/4" UFP 2 x BEARING 1-3/4" UFP (25580) 2 x SEAL 1-3/4" UFP (21333) 1 x BEARING PROTECTOR SET SS 2.717 1 x PG1096 DEMCO ACTUATOR DISC #20000 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 8' 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 23' 2 x PG2028-1 DISC ROTOR AND HUB 12" 8-LUG UFP 1 x CALIPER FITTING PLUG UFP #32212 1 x PL2142 5-WAY FULL GROUND WIRE HARNESS 40' 1 x PG5003 DISC BRAKE CALIPER ASSEMBLY LH UFP DB3 (DOUBLE BANJO FITTING) 1 x PG5005 DISC BRAKE CALIPER ASSEMBLY RH UFP DB3 (DOUBLE BANJO FITTING) 4 x DISC CALIPER BOLT 7/16" x 1" SHCS (UFP) 6 x PLASTIC WIRE TIE HD 14-1/2" 2 x CHAIN W/ ONE HOOK 40" 4 x CAPSCREW PLATED NC 1/2" x 4-1/2" GR5 4 x NUT LOCK NI 1/2-13 PLATED OWNERS MANUAL

PG1040 ADDITIONAL AXLE 5-LUG DISC BRAKE KIT (DEXTER / UFP)

REPRESENTATION PHOTO IF YOU WANT TO ADD BRAKES TO A TRAILER THAT WAS NEVER EQUIPPED WITH THEM, MAKE SURE THERE IS AT LEAST FOUR-INCHES OF CLEARANCE FROM THE BRAKE MOUNTING PLATE ON THE AXLE OR TORSION ARM TO THE OUTSIDE EDGE OF THE FRAME. MAGIC TILT BRAKE KIT ~ PG1040 COMES WITH PG4856 DOUBLE BANJO FITTING TO CONNECT BRAKE LINES. UFP SPINDLE MOUNTING HARDWARE (NOT INCLUDED): PH2125 IF USING ON NON-UFP AXLES WITH 1" SPINDLE THREADS YOU WILL NEED THE PH2160 CONVERSION KIT (NOT INCLUDED) INCLUDES: 2 x BEARING 1-1/16" (44649) 2 x BEARING 1-3/8" (68149) 2 x SEAL 1-3/8" UFP (257-168) 1 x BEARING PROTECTOR SET SS 1.980 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 4' 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 8' 2 x PG2026-1 DISC ROTER AND HUB 10" 5-LUG UFP 1 x CALIPER FITTING PLUG UFP #32212 1 x PG5003 DISC BRAKE CALIPER ASSEMBLY LH UFP DB3 (DOUBLE BANJO FITTING) 1 x PG5005 DISC BRAKE CALIPER ASSEMBLY RH UFP DB3 (DOUBLE BANJO FITTING) 4 x DISC CALIPER BOLT 7/16" x 1" SHCS (UFP) 6 x PLASTIC WIRE TIE HD 14-1/2" OWNERS MANUAL

PG1042 ADDITIONAL AXLE 6-LUG DISC BRAKE KIT (DEXTER / UFP)

REPRESENTATION PHOTO IF YOU WANT TO ADD BRAKES TO A TRAILER THAT WAS NEVER EQUIPPED WITH THEM, MAKE SURE THERE IS AT LEAST FOUR-INCHES OF CLEARANCE FROM THE BRAKE MOUNTING PLATE ON THE AXLE OR TORSION ARM TO THE OUTSIDE EDGE OF THE FRAME. MAGIC TILT BRAKE KIT ~ PG1042 COMES WITH PG4856 DOUBLE BANJO FITTING TO CONNECT BRAKE LINES. UFP SPINDLE MOUNTING HARDWARE (NOT INCLUDED): PH2130 IF USING ON NON-UFP AXLES WITH 1" SPINDLE THREADS YOU WILL NEED THE PH2165 CONVERSION KIT (NOT INCLUDED) INCLUDES: 2 x BEARING 1-1/4" 2 x BEARING 1-3/4" (25580) 2 x SEAL 1-3/4" UFP (21333) 2 x PF1101 STAINLESS BEARING PROTECTOR 2.441" 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 4' 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 8' 2 x PG2027-1 DISC ROTER AND HUB 12" 6-LUG UFP 1 x CALIPER FITTING PLUG UFP #32212 1 x PG5003 DISC BRAKE CALIPER ASSEMBLY LH UFP DB3 (DOUBLE BANJO FITTING) 1 x PG5005 DISC BRAKE CALIPER ASSEMBLY RH UFP DB3 (DOUBLE BANJO FITTING) 4 x DISC CALIPER BOLT 7/16" x 1" SHCS (UFP) 6 x PLASTIC WIRE TIE HD 14-1/2" OWNERS MANUAL

PG1044 ADDITIONAL AXLE 8-LUG DISC BRAKE KIT (DEXTER / UFP)

REPRESENTATION PHOTO IF YOU WANT TO ADD BRAKES TO A TRAILER THAT WAS NEVER EQUIPPED WITH THEM, MAKE SURE THERE IS AT LEAST FOUR-INCHES OF CLEARANCE FROM THE BRAKE MOUNTING PLATE ON THE AXLE OR TORSION ARM TO THE OUTSIDE EDGE OF THE FRAME. MAGIC TILT BRAKE KIT ~ PG1044 COMES WITH PG4856 DOUBLE BANJO FITTING TO CONNECT BRAKE LINES. UFP SPINDLE MOUNTING HARDWARE (NOT INCLUDED): PH2130 IF USING ON NON-UFP AXLES WITH 1" SPINDLE THREADS YOU WILL NEED THE PH2165 CONVERSION KIT (NOT INCLUDED) INCLUDES: 2 x BEARING 1-1/4" 2 x BEARING 1-3/4" (25580) 2 x SEAL 1-3/4" UFP (21333) 2 x BEARING PROTECTOR 2.328 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 4' 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 8' 1 x PG2028-1 DISC ROTER AND HUB 12" 8-LUG UFP 2 x CALIPER FITTING PLUG UFP #32212 1 x PG5003 DISC BRAKE CALIPER ASSEMBLY LH UFP DB3 (DOUBLE BANJO FITTING) 1 x PG5005 DISC BRAKE CALIPER ASSEMBLY RH UFP DB3 (DOUBLE BANJO FITTING) 4 x DISC CALIPER BOLT 7/16" x 1" SHCS (UFP) 6 x PLASTIC WIRE TIE HD 14-1/2" OWNERS MANUAL

PG1075 ~ BRAKE LOCKOUT PLUG A60/75 ACTUATORS DEXTER / UFP

REPRESENTATION PHOTO MAGIC TILT BRAKE LOCKOUT PLUG ~ PG1075 CAUTION! IF LOCKOUT IS NOT REMOVED DURING NORMAL TOWING THE TRAILER'S BRAKES WILL NOT FUNCTION. CUSTOMER ASSUMES RESPONSIBILITY FOR SAFE USAGE. ALLOWS TRAILERS WITH DEXTER / UFP IN-LINE SURGE DISC BRAKES TO BE BACKED UP WHILE NOT PLUGGED INTO THE VEHICLE. WORKS WITH ALL UFP A60/75 7.5K IN-LINE DISC BRAKE ACTUATORS. FOR A-160 16K ACTUATORS, USE THE PG1090-1 CLIP OWNERS MANUAL

PG1090 ~ BRAKE ACTUATOR 7.5K IN-LINE DISC DEXTER / UFP (A-60, A-75)

REPRESENTATION PHOTO MAGIC TILT BRAKE ACTUATOR ~ PG1090 BALL SIZE" 2" FOR 3x4 AND 3x5 TONGUES ONLY USE PG1091 FOR 3x3 TONGUES REPLACEMENT EMERGENCY CABLE PG4812 BRAKE LOCKOUT PLUG PG1075 HOW TO RELEASE THE EMERGENCY BRAKE CABLE IN TRAILER KNOWLEDGE OWNERS MANUAL

PG1090-1 ~ BRAKE LOCKOUT CLIP A-160 ACTUATOR DEXTER / UFP

REPRESENTATION PHOTO MAGIC TILT BRAKE LOCKOUT CLIP ~ PG1090-1 CAUTION! IF LOCKOUT IS NOT REMOVED DURING NORMAL TOWING THE TRAILER'S BRAKES WILL NOT FUNCTION. CUSTOMER ASSUMES RESPONSIBILITY FOR SAFE USAGE. ALLOWS TRAILERS WITH DEXTER / UFP 16K IN-LINE SURGE DISC BRAKES TO BE BACKED UP WHILE NOT PLUGGED INTO THE VEHICLE. DESIGED TO SLIP BETWEEN HOUSING AND COUPLER TO FILL THE TRAVEL SLOT.

PG1095 ~ BRAKE ACTUATOR 16K DISC DEXTER / UFP (A-160)

REPRESENTATION PHOTO MAGIC TILT BRAKE ACTUATOR ~ PG1095 REPLACEMENT EMERGENCY BRAKE CABLE PG4827 BRAKE LOCKOUT CLIP PG1090-1 HOW TO RELEASE THE EMERGENCY BRAKE CABLE IN TRAILER KNOWLEDGE OWNERS MANUAL

PG2032

DISC BRAKE ROTOR KIT 10" 5L [NO CAL] EA. - UFP

PG2035 DISC BRAKE ASSEMBLY 8-LUG (DEXTER / UFP)

REPRESENTATION PHOTO IF YOU WANT TO ADD BRAKES TO A TRAILER THAT WAS NEVER EQUIPPED WITH THEM, MAKE SURE THERE IS AT LEAST FOUR-INCHES OF CLEARANCE FROM THE BRAKE MOUNTING PLATE ON THE AXLE OR TORSION ARM TO THE OUTSIDE EDGE OF THE FRAME. MAGIC TILT DISC BRAKE ASSEMBLY ~ PG2035 COMES WITH PG4856 DOUBLE BANJO FITTING TO CONNECT BRAKE LINES. UFP SPINDLE MOUNTING HARDWARE (NOT INCLUDED): PH2130 IF USING ON NON-UFP AXLES WITH 1" SPINDLE THREADS YOU WILL NEED THE PH2165 CONVERSION KIT (NOT INCLUDED) INCLUDES: 16 x LUG NUT 13/16" 2 x BEARING 1-1/4" (67048) 2 x BEARING 1-3/4" (25580) 2 x SEAL 1-3/4" UFP (21333) 1 x BEARING PROTECTOR SET 2.717 2 x PG2028-1 DISC ROTOR AND HUB 12" 8-LUG UFP 1 x PG5003 DISC BRAKE CALIPER ASSEMBLY LH UFP DB3 (DOUBLE BANJO FITTING) 1 x PG5005 DISC BRAKE CALIPER ASSEMBLY RH UFP DB3 (DOUBLE BANJO FITTING) 4 x 7/16" x 1" SHCS BOLT UFP DISC CALIPER 2 x COTTER PIN 1/8" x 1-1/4" UFP OWNERS MANUAL

PG2070-L ~ DISC BRAKE ASSEMBLY 5-LUG GREASED (DEXTER / UFP)

To Add brakes to a trailer that was never equipped with them, Confirm there is At least four-inches of clearance from the brake mounting plate on the axle or torsion arm to the outside edge of the frame. Magic Tilt Brake Assembly ~ PG2070-L Good to know: - Bearings, Races and seals are installed in rotors and greased (Ready-To-Go). - 2 x PE2050 Replacement Seals are in the box (Loose) To accomodate non-UFP spindles if needed. Customer is responsible for determination. - Ships with PG4856 Double banjo fittings to connect brake lines. - Includes UFP hub mounting hardware. If using on non-UFP axles with 1" Spindle Threads you'll also need the PH2160 Conversion Kit (Not Included). Included in this kit: 10 x PD2250 Lug Nut 13/16" 2 x PE1400 Bearing 1-1/16" (44649) - Installed 2 x PE1450 Bearing 1-3/8" (68149) - Installed 2 x PE2055 Seal 2.57" x 1.68" UFP (257-168) - Installed 2 x PF1054 Bearing Protector SS 1.980 2 x PF1060 Bearing Protector Bra 1.980 2 x PG2026-1 Disc Rotor And Hub 10" 5-Lug Plated UFP 1 x PG5003 Disc brake caliper assembly LH UFP db3 (Double Banjo Fitting) 1 x PG5005 Disc brake caliper assembly RH UFP db3 (Double Banjo Fitting) 4 x PG5007 Disc Caliper Bolt 7/16" x 1" Shcs (UFP) 2 x PH2012 Cotter Pin 1/8" x 1-1/4" Plated UFP 1 x PG4862 Caliper Fitting Plug Brass 2 x PH1980 Spindle Nut 13/16" UFP 2 x PH2108 Spindle Nut Retainer UFP 2 x PH2065 Axle D-Washer 3/4" x 3/32" UFP 2 x PE2050 Seal 2.55" x 1.71" Non-UFP - Loose Owners Manual

PG2071-L ~ DISC BRAKE ASSEMBLY 6-LUG GREASED (DEXTER / UFP)

REPRESENTATION PHOTO IF YOU WANT TO ADD BRAKES TO A TRAILER THAT WAS NEVER EQUIPPED WITH THEM, MAKE SURE THERE IS AT LEAST FOUR-INCHES OF CLEARANCE FROM THE BRAKE MOUNTING PLATE ON THE AXLE OR TORSION ARM TO THE OUTSIDE EDGE OF THE FRAME. MAGIC TILT DISC BRAKE ASSEMBLY ~ PG2071-L - BEARINGS, RACES AND SEALS ARE INSTALLED IN ROTORS AND GREASED (READY-TO-GO). - 2 x PE2100 REPLACEMENT SEALS ARE INCLUDED (LOOSE) TO ACCOMODATE NON-UFP SPINDLES IF NEEDED. CUSTOMER IS RESPONSIBLE FOR DETERMINATION. - COMES WITH PG4856 DOUBLE BANJO FITTING TO CONNECT BRAKE LINES. - INCLUDES UFP HUB MOUNTING HARDWARE. IF USING ON NON-UFP AXLES WITH 1" SPINDLE THREADS YOU WILL NEED THE PH2165 CONVERSION KIT (NOT INCLUDED). INCLUDES: 12 x PD2250 LUG NUT 13/16" 2 x PE1550 BEARING 1-1/4" (15123) - INSTALLED 2 x PE1600 BEARING 1-3/4" (25580) - INSTALLED 2 x PE2101 SEAL 3.37" x 2.13" UFP (21333) - INSTALLED 2 x PF1101 BEARING PROTECTOR SS 2.441" 2 x PF1063 BEARING PROTECTOR BRA 2.441" 2 x PG2027-1 DISC ROTOR AND HUB 12" 6-LUG PLATED UFP 1 x PG500 3 DISC BRAKE CALIPER ASSEMBLY LH UFP DB3 (DOUBLE BANJO FITTING) 1 x PG5005 DISC BRAKE CALIPER ASSEMBLY RH UFP DB3 (DOUBLE BANJO FITTING) 4 x PG5007 DISC CALIPER BOLT 7/16" x 1" SHCS (UFP) 2 x PH2012 COTTER PIN 1/8" x 1-1/4" PLATED UFP 1 x PG4862 CALIPER FITTING PLUG BRASS 2 x PH1980 SPINDLE NUT 13/16" UFP 2 x PH2108 SPINDLE NUT RETAINER UFP 2 x PH2066 AXLE D-WASHER 3/4" x 3/16" UFP 2 x PE2100 SEAL 3.37" x 2.23" NON-UFP - LOOSE OWNERS MANUAL

PG2252 ~ REVERSE LOCKOUT SOLENOID

REPRESENTATION PHOTO MAGIC TILT REVERSE LOCKOUT SOLENOID ~ PG2252 CAN BE USED WHEN CONVERTING A DRUM ACTUATOR FOR DISC BRAKE USE. MAY SHIP FROM STORE LOCATION

PG4808 ~ COUPLER LATCH REPAIR KIT A-60, A-75 DEXTER / UFP

REPRESENTATION PHOTO MAGIC TILT LATCH REPLACEMENT KIT ~ PG4808

PG4809 ~ ACTUATOR DAMPER DEXTER / UFP

REPRESENTATION PHOTO MAGIC TILT ACTUATOR DAMPER ~ PG4809

PG4812 ~ BREAKAWAY CABLE A-60, A-75 DEXTER / UFP

REPRESENTATION PHOTO MAGIC TILT BREAKAWAY CABLE ~ PG4812 SEE REPLACEMENT VIDEO IN OUR TRAILER KNOWLEDGE SECTION

PG4814-1 ~ MASTER CYLINDER NEW STYLE DEXTER / UFP

REPRESENTATION PHOTO MAGIC TILT MASTER CYLINDER ~ PG4814-1 THIS IS THE "NEW-STYLE" REPLACEMENT MASTER CYLINDER FOR ALMOST EVERY SURGE ACTUATOR MADE BY UFP (NOW DEXTER). IT REPLACES THE OLD-STYLE MASTER CYLINDER THAT HAD THE REVERSE SOLENOID THREADED IN THE BACK OF THE HOUSING. THIS STYLE INCLUDES THE NEW PG4815-1 DROP-IN SOLENOID.

PG4815-1 ~ SOLENOID ASSEMBLY DEXTER / UFP (054-140-22)

REPRESENTATION PHOTO MAGIC TILT SOLENOID ASSEMBLY ~ PG4815-1 THIS IS THE NEW-STYLE SOLENOID WITH TWO WIRES AND WITHOUT A BYPASS HOSE AND WILL ONLY WORK ON THE NEW-STYLE UFP MASTER CYLINDER PG4814-1 . IT WILL NOT WORK ON THE OLD-STYLE UFP MASTER CYLINDERS THAT REQUIRE A BYPASS HOSE.

PG4817 ~ ACTUATOR COVER PLATE DEXTER / UFP A-60/75

REPRESENTATION PHOTO MAGIC TILT ACTUATOR COVER PLATE ~ PG4817

PG4819 ~ MASTER CYLINDER PLUG DEXTER / UFP

REPRESENTATION PHOTO MAGIC TILT RESERVOIR PLUG ~ PG4819 SOLD INDIVIDUALLY

PG4820 ~ LATCH PIN KIT A-60, A-75, A-160 DEXTER / UFP

REPRESENTATION PHOTO MAGIC TILT LATCH PIN KIT ~ PG4820 INCLUDES REPLACEMENT SNAP RING FOR 7.5K UFP ACTUATORS ATTACHES TO 16K ACTUATORS WITH POP RIVET (NOT INCLUDED)

PG4823 ~ LATCH PIN KIT 1-1/4" DEXTER / UFP

REPRESENTATION PHOTO MAGIC TILT HITCH PIN KIT ~ PG4823 INCLUDES : PIN, CLIP, AND CABLE WILL NOT WORK ON NEWER IN-LINE STYLE ACTUATORS

PG4824 ~ ROLLER PIN / PAD SERVICE KIT A160 ACTUATOR DEXTER / UFP K71-772-00

REPRESENTATION PHOTO MAGIC TILT ACTUATOR REPAIR KIT ~ PG4824 PROVIDES REPLACEMENT WEAR ITEMS FOR SMOOTH OPERATION. INCLUDES: 2 X RUB PADS 7-5/8" x 3-3/8" x 1" 2 X BUSHINGS 15/16" OD x 1-1/4" 4 X ROLLER PINS 3/4" x 4-5/16" 8 X SNAP RINGS 3/4"

PG4825 ~ ACTUATOR COVER PLATE DEXTER / UFP A-160

REPRESENTATION PHOTO MAGIC TILT ACTUATOR COVER PLATE ~ PG4825 SOLD INDIVIDUALLY

PG4826 ~ COUPLER LATCH REPAIR KIT A-160 DEXTER / UFP

REPRESENTATION PHOTO MAGIC TILT LATCH REPLACEMENT KIT ~ PG4826

PG4827 ~ BREAKAWAY CABLE TOP MOUNT DEXTER/UFP A-160

REPRESENTATION PHOTO MAGIC TILT BREAWAY CABLE ~ PG4827

PG4849 ~ DISC BRAKE PAD DEXTER / UFP 1-PAD ONLY

REPRESENTATION PHOTO MAGIC TILT BRAKE PAD ~ PG4849 SOLD INDIVIDUALLY CONTAINS ONLY ONE BRAKE PAD. ORDER TWO TO OUTFIT ONE CALIPER. CAN ONLY BE USED ON DEXTER/UFP BRAKE SYSTEMS

PG4858 ~ COPPER WASHER BANJO FITTING (UFP)

REPRESENTATION PHOTO MAGIC TILT BANJO WASHER ~ PG4858 USE WITH: SINGLE BANJO FITTING PG4855 OR DOUBLE BANJO FITTING PG4856 BANJO BOLT PG4857

PG4859 ~ CALIPER BLEEDER SCREW (DEXTER / UFP)

REPRESENTATION PHOTO MAGIC TILT BLEEDER SCREW ~ PG4859

PG4862 ~ CALIPER FITTING PLUG (UFP)

REPRESENTATION PHOTO MAGIC TILT FITTING PLUG ~ PG4862 SOLD INDIVIDUALLY USE TO PLUG UNNEEDED PORTS ON DOUBLE BANJO FITTINGS

PG5007 ~ DISC CALIPER BOLT 7/16" x 1" DEXTER / UFP

REPRESENTATION PHOTO MAGIC TILT CALIPER BOLT ~ PG5007 USES 3/8" ALLEN WRENCH

PG5058 ~ DISC BRAKE ADAPTER PLATE (DEXTER / UFP)

REPRESENTATION PHOTO MAGIC TILT ADAPTER PLATE ~ PG5058 ADAPTS 5-HOLE ROUND BRAKE PLATES TO 4-HOLE SQUARE ON 5.2K TO 7K AXLES. ALOWS DIRECT MOUNTING OF DEXTER / UFP CALIPERS ON 12" ROTORS. REQUIRES THE FOLLOWING HARDWARE (NOT INCLUDED) 5 X PY0215 3/8" x 1-1/14" BOLT 5 X PY1305 3/8" NYLOCK NUT

PH1300 ~ SPRING AXLE 2 x 2 (CUSTOM)

3.5K DEXTER / UFP

Magic Tilt Heavy duty custom spring axle no Hubs ~ PH1300 Contact us at 877-795-1965 for a shipping quote (V - Add PH0999, $27.95) V - Above Springs Only Good to know: Includes 4-Hole Square Brake Plate Axle will come with an "X" Drawn On The Tube. The x should face the back of the trailer when installed.

PH1305 ~ ZERC FITTING POSI-LUBE (DEXTER / UFP)

REPRESENTATION PHOTO MAGIC TILT ZERC FITTING ~ PH1305 SOLD INDIVIDUALLY FOR SPINDLE END ON POSI-LUBE SPINDLES

PH1325 ~ TORSION ARM 3" AXLES NON-POSI LUBE DEXTER / UFP

REPRESENTATION PHOTO MAGIC TILT TORSION ARM & SPINDLE ~ PH1325 CAUTION – MAKE SURE YOU PROPERLY IDENTIFY YOUR BRAND OF TORSION ARM AS UFP (SEE SECOND IMAGE) INCLUDES 4-HOLE BRAKE PLATE AND TORSION ARM MOUNTING BOLT REQUIRES THE FOLLOWING HUB MOUNTING HARDWARE KIT PH2125 (NOT INCLUDED)

PH1327 ~ TORSION ARM 3" AXLES W/ POSI-LUBE DEXTER / UFP

REPRESENTATION PHOTO MAGIC TILT TORSION ARM & SPINDLE ~ PH1327 CAUTION – MAKE SURE YOU PROPERLY IDENTIFY YOUR BRAND OF TORSION ARM AS UFP (SEE SECOND IMAGE) INCLUDES 4-HOLE BRAKE PLATE AND TORSION ARM MOUNTING BOLT REQUIRES THE FOLLOWING HUB MOUNTING HARDWARE KIT PH2125 (NOT INCLUDED)

PH1328-4

Vault Dexter (UFP) Loaded Torsion Spindle Arm 4.2K, Hub/5 Lug Rotor with Caliper Spindle Arm 002-324-08 Rotor 008-435-05 Caliper 089-235-28 Vault Cap 021-091-00 Seal 010-172-00 Mounting Bolt, Nut and Washer (5/8-11 x 4" Bolt)

PH1328-5

Vault UFP / Dexter Loaded Torsion Spindle Arm, Aluminum Caliper, Rotor 5 Lug, LEFT Hand Assembled and Pre-greased with Vault Hybrid oil. Spindle Arm 002-324-08 Rotor 008-435-05 Caliper 089-235-28 Vault Cap 021-091-00 Seal 010-172-00

PH1330 ~ TORSION ARM 3-1/2" AXLES SQUARE PLATE DEXTER / UFP

REPRESENTATION PHOTO MAGIC TILT TORSION ARM & SPINDLE ~ PH1330 INCLUDES 4-HOLE BRAKE PLATE AND TORSION ARM-TO-AXLE MOUNTING HARDWARE

PH1349 ~ TORSION AXLE WELD-ON BRACKET 3" DEXTER / UFP

REPRESENTATION PHOTO MAGIC TILT WELD-ON BRACKET

PH1450 ~ CUSTOM SPRING AXLE 2x3 UP TO 89T 5-6K DEXTER / UFP

REPRESENTATION PHOTO MAGIC TILT HEAVY DUTY CUSTOM SPRING AXLE NO HUBS ~ PH1450 PLEASE CALL 941-358-1117 FOR SHIPPING QUOTE (V - ADD PH0999, $27.95) V - ABOVE SPRINGS ONLY INCLUDES 4-HOLE SQUARE BRAKE PLATES STANDARD. CAN BE ORDERED WITH 5-HOLE ROUND BRAKE PLATES AXLE WILL COME WITH AN "X" DRAWN ON THE TUBE. THE X SHOULD FACE THE BACK OF THE TRAILER WHEN INSTALLED.

PH150-40 ~ TORSION ARM FOR 3" AXLES FA-35 (NON-UFP)

REPRESENTATION PHOTO MAGIC TILT TORSION ARM & SPINDLE ~ PH150-40 CAUTION – MAKE SURE YOU PROPERLY IDENTIFY YOUR BRAND OF TORSION ARM AS FA-35 (SEE SECOND IMAGE) INCLUDES 4-HOLE BRAKE PLATE, TORSION ARM MOUNTING BOLT, POSI-LUBE FITTING. THIS ARM WILL NOT WORK ON STANDARD DEXTER / UFP AXLES.

PH1500 ~ CUSTOM SPRING AXLE 2x3 UP TO 88T 3.5K DEXTER / UFP

REPRESENTATION PHOTO MAGIC TILT HEAVY DUTY CUSTOM SPRING AXLE NO HUBS ~ PH1500 PLEASE CALL 941-358-1117 FOR SHIPPING QUOTE (V - ADD PH0999, $27.95) V - ABOVE SPRINGS ONLY INCLUDES 4-HOLE SQUARE BRAKE PLATES. AXLE WILL COME WITH AN "X" DRAWN ON THE TUBE. THE X SHOULD FACE THE BACK OF THE TRAILER WHEN INSTALLED.

PH1600 ~ TORSION AXLE 3x3 (CUSTOM) 73-95T 3.5K NO HUBS (NON UFP)

REPRESENTATION PHOTO MAGIC TILT CUSTOM 3x3 TORSION AXLE NO HUBS ~ PH1600 PLEASE CALL 941-358-1117 FOR SHIPPING QUOTE SPECIAL ORDER - PLEASE ALLOW ADDITIONAL TIME FOR SHIPPING V + $22.95 (PH0999) FRAME WIDTH MUST BE 63" OR GREATER INCLUDES 4-HOLE SQUARE BRAKE PLATES. MOUNTING HARDWARE (NOT INCLUDED) ALUMINUM TUBE FRAME BOTTOM CHANNEL PY9145-T I-BEAM ALUMINUM FRAME PY9145

PH1605 ~ CUSTOM TORSION AXLE 3-1/2x3-1/2 73-95T 5-6K DEXTER/UFP

REPRESENTATION PHOTO MAGIC TILT CUSTOM 3-1/2x3-1/2 TORSION AXLE NO HUBS ~ PH1605 (PLEASE CALL 941-358-1117 FOR SHIPPING QUOTE) SPECIAL ORDER - PLEASE ALLOW ADDITIONAL TIME FOR SHIPPING V + $22.95 (PH0999) INCLUDES 4-HOLE SQUARE BRAKE PLATES STANDARD. CAN BE ORDERED WITH 5-HOLE ROUND BRAKE PLATES. MOUNTING HARDWARE TO FRAME (NOT INCLUDED) ALUMINUM TUBE FRAME BOTTOM CHANNEL PY9145-T I-BEAM ALUMINUM FRAME PY9145

PH1800 ~ SPINDLE 1-1/16" x 1-1/16" 2.5K DEXTER / UFP

REPRESENTATION PHOTO MAGIC TILT SPINDLE ~ PH1800

PH1849 ~ SPINDLE 1-1/16" x 1-3/8" 3.5K DEXTER / UFP

REPRESENTATION PHOTO MAGIC TILT SPINDLE ~ PH1849

PH1903 ~ SPINDLE 1-1/4" x 1-3/4" 5-6K DEXTER / UFP

REPRESENTATION PHOTO MAGIC TILT SPINDLE ~ PH1903 6,000 POUNDS (8-LUG)

PH1906 ~ SPINDLE 1-1/4" x 1-3/4" 5-6K DEXTER / UFP

REPRESENTATION PHOTO MAGIC TILT SPINDLE ~ PH1906 6,000 POUNDS (8-LUG)

PH2065 ~ AXLE D WASHER 3/4" x 13/16" x .137" (DEXTER / UFP)

REPRESENTATION PHOTO MAGIC TILT AXLE WASHER ~ PH2065 SOLD INDIVIDUALLY THINNER. USED ON 2000 TO 3500 LB. UFP AXLES

PH2066 ~ AXLE D WASHER 3/4" x 13/16" x .184" (DEXTER / UPF)

REPRESENTATION PHOTO MAGIC TILT AXLE WASHER ~ PH2066 SOLD INDIVIDUALLY THICKER. USED ON 5000 LB. AND GREATER UFP AXLES

PH2145 ~ HUB CONVERSION KIT 1-1/16" SPINDLES (NON-UFP HUBS to UFP AXLES)

REPRESENTATION PHOTO MAGIC TILT HUB CONVERSION KIT ~ PH2145 INCLUDES: ENOUGH HARDWARE TO CONVERT TWO HUBS TO 1-1/16" UFP-STYLE SPINDLES 2 x PE2010 SEAL 1-1/16" UFP (125-198) 2 x PH1980 SPINDLE NUT 13/16" UFP 2 x PH2012 COTTER PIN 1/8" x 1-1/4" UFP 2 x PH2065 3/4" AXLE D WASHER 3/32" UFP 2 x PH2108 SPINDLE NUT RETAINER UFP

PH2150 ~ HUB CONVERSION KIT 1-3/8" SPINDLES (NON-UFP HUBS to UFP AXLES)

REPRESENTATION PHOTO MAGIC TILT HUB CONVERSION KIT ~ PH2150 INCLUDES: ENOUGH HARDWARE TO CONVERT TWO HUBS TO 3.5K UFP-STYLE SPINDLES 2 x PE2055 SEAL 1-3/8" UFP (168-257) 2 x PH1980 SPINDLE NUT 13/16" UFP 2 x PH2012 COTTER PIN 1/8" x 1-1/4" UFP 2 x PH2065 3/4" AXLE D WASHER 3/32" UFP 2 x PH2108 SPINDLE NUT RETAINER UFP

PH2155 ~ HUB CONVERSION KIT 1-3/4" SPINDLES (NON-UFP HUBS to UFP AXLES)

REPRESENTATION PHOTO MAGIC TILT HUB CONVERSION KIT ~ PH2155 INCLUDES: ENOUGH HARDWARE TO CONVERT TWO HUBS TO ALL UFP-STYLE 1-1/4" x 1-3/4" SPINDLES 2 x PE2101 SEAL 1-3/4" UFP (21333) 2 x PH1980 SPINDLE NUT 13/16" UFP 2 x PH2012 COTTER PIN 1/8" x 1-1/4" UFP 2 x PH2066 3/4" AXLE D WASHER 3/16" UFP 2 x PH2108 SPINDLE NUT RETAINER UFP

PH2160 ~ CONVERSION KIT (5-LUG 3.5K UFP ROTORS & HUBS to NON-UFP AXLES)

REPRESENTATION PHOTO MAGIC TILT HUB/ROTOR CONVERSION KIT ~ PH2160 INCLUDES: ENOUGH HARDWARE TO CONVERT TWO 5-LUG ROTORS OR HUBS TO EITHER 1" D OR 1" ROUND SPINDLES 2 x PE2050 SEAL 1-3/8" NON-UFP (171-255) 2 x PH2014 COTTER PIN 1/8" x 1-3/4" (1" SPINDLE THREADS) 2 x PH2000 AXLE NUT 1" CASTLE NON-UFP 2 x PH2105 TANG WASHER (1" D-SPINDLES) 2 x PH2070 SPINDLE WASHER (1" D-SPINDLES) 2 x PH2060 SPINDLE WASHER (1" ROUND SPINDLES)

PH2165 ~ CONVERSION KIT (6 & 8-LUG UFP ROTORS & HUBS TO NON-UFP AXLES)

REPRESENTATION PHOTO MAGIC TILT HUB/ROTOR CONVERSION KIT ~ PH2165 INCLUDES: ENOUGH HARDWARE TO CONVERT TWO 6 OR 8-LUG ROTORS OR HUBS TO EITHER 1" D OR 1" ROUND SPINDLES 2 x PE2100 SEAL 1-3/4" NON-UFP (22333) 2 x PH2014 COTTER PIN 1/8" x 1-3/4" (1" SPINDLE THREADS) 2 x PH2000 AXLE NUT 1" CASTLE NON-UFP 2 x PH2105 TANG WASHER (1" D-SPINDLES) 2 x PH2070 SPINDLE WASHER (1" D-SPINDLES) 2 x PH2060 SPINDLE WASHER (1" ROUND SPINDLES)

PU2270 ~ COUPLER ADJUSTABLE 2-5/16"

20K (DEXTER / UFP)

REPRESENTATION PHOTO MAGIC TILT COUPLER ~ PU2270 USED ON LARGE TRAILERS UTILIZING ELECTRIC-OVER-HYDRAULIC BRAKES USE WITH (NOT INCLUDED): ONE PU2272 CHANNEL BRACKET TWO PY0285 5/8"x4-1/2" GRADE 8 BOLTS TWO PY1320 5/8" NYLOCK NUTS

PU2272 ~ COUPLER BRACKET ADJUSTABLE (DEXTER / UFP)

REPRESENTATION PHOTO MAGIC TILT COUPLER BRACKET ~ PU2272 USED ON LARGE TRAILERS UTILIZING ELECTRIC-OVER-HYDRAULIC BRAKES 4-HOLE, 3 POSITION ADJUSTMENT USE WITH (NOT INCLUDED): ONE PU2270 COUPLER TWO PY0285 5/8" x 4-1/2" GRADE 8 BOLTS TWO PY1320 5/8" NYLOCK NUTS

PV1885-1 ~ SINGLE CROSS-FRAME SPARE MOUNT KIT (3x3, 3x4 TONGUES)

REPRESENTATION PHOTO MAGIC TILT SINGLE SPARE TIRE MOUNT ASSEMBLY ~ PV1885-1 DOES NOT WORK WITH 4 OR 8-LUG RIMS MOUNTS ACROSS A-FRAME AND TONGUE INSTALLATION VIDEO INCLUDES: 2 x PD2250 LUG NUT 13/16" 2 x PG4860 PRESS-IN STUD UFP 2 x PK1320 1-HOLE SLOT PLATE GALV 1 x NW0480 2x2 END CAP 1 x PV1885 ML SPARE TIRE MOUNT GALV 4 x PY1410 NUT HEX 1/2-13 GALV 4 x PY1610 WASHER LOCK 1/2 GALV 2 x PY2050 U-BOLT 1/2 x 2-1/16 x 6-13/16 GALV

PV1885-2 ~ SINGLE CROSS-FRAME SPARE MOUNT KIT 3x5 TONGUE

REPRESENTATION PHOTO MAGIC TILT SINGLE SPARE TIRE MOUNT ASSEMBLY FOR 3x5 TONGUE~ PV1885-2 DOES NOT WORK WITH 4 OR 8-LUG RIMS MOUNTS ACROSS A-FRAME AND TONGUE INSTALLATION VIDEO INCLUDES: 2 x PD2250 LUG NUT 13/16" 2 x PG4860 PRESS-IN STUD UFP 1 x NW0480 2x2 END CAP 1 x PV1885 ML SPARE TIRE MOUNT GALV 2 x PK1320 SLOT PLATE 1-HOLE GALV 2 x PK1300 SHACKLE PLATE 2-HOLE GALV 4 x PY1410 NUT HEX 1/2-13 GALV 4 x PY1659 SCREW HEX HEAD 1/2 x 9 GALV 8 x PY1515 FLAT WASHER US 1/2 GALV 4 x PY1610 LOCK WASHER 1/2 GALV

Spindle Seal Kits for UFP Spindles

2 sizes available

2 Rings and 2 O-Rings

Spindles

SPINDLE 1-1/16" POSI LUBE

Spindles

1-3/8X1-1/16" POSI LUBE

Spindles

2 sizes available

Spring Tabs

3 sizes available

Swing Tongue Assemblies

3 sizes available

3X3X24" SWING TONGUE ASSEMBLY SWING TONGUE RR 3X3X4' W/PIVOT BOX SWING TONGUE HTCH PIN 5/8X5"

Swing Tongue Pivot Boxes

3 sizes available

MaterialGalvanized BrandUFP

Torsion Arms

3 sizes available

Universal Brake Pad -Pair

Universal Brake Pad -Pair (2 Pads) Fits UFP DB-35 Caliper