Brake Hardware

10" Disc Brake Assemblies

Stainless Steel

BEARING 1-1/16" [44649] qty2 BEARING 1-3/8" [68149] qty2 SEAL 1-3/8"[UFP][257-168] qty2 BEARING PROTECTOR SET S/S #1.980 qty1 DISC ROTOR AND HUB S/S 10" 5L [UFP] qty2 DISC BRAKE CALIPER S/S LH [UFP DB35 qty1 DISC BRAKE CALIPER S/S RH [UFP DB35 qty1 7/16"X1"SHCS BOLT [UFP DISC CALIPER qty4 COTTER PIN 1/8"X1-1/4"[UFP AXLE] qty2

12" Disc Brake Assemblies

2 sizes available

BEARING 1-1/4" [67048] qty2 BEARING 1-3/4" [25580] qty2 SEAL 1-3/4"[UFP][21333] qty2 BEARING PROTECTOR SET #2.717 qty1 DISC ROTOR AND HUB S/S 12" 8L [UFP] qty2 DISC BRAKE CALIPER S/S LH [UFP DB35 qty1 DISC BRAKE CALIPER S/S RH [UFP DB35 qty1 7/16"X1"SHCS BOLT [UFP DISC CALIPER qty4 COTTER PIN 1/8"X1-1/4"[UFP AXLE] qty2

Brake Caliper Components

BRAKE LINE COUPLER

These unions are the best option to join two 3/16" brake lines together.

Brake Line Kits for Single Axle

6 sizes available

1- HYD. BRAKE HOSE W/SWIVEL 19' 1- HYD.BRAKE/BRASS T-FITTING 1- HYD. BRAKE HOSE W/SWIVEL 1' 1- HYD. BRAKE HOSE W/SWIVEL 6'6" 10 - PLASTIC WIRE TIE HD 14-1/2""

BRAKE PADS

UNIVERSAL BRAKE PAD (SET)

Complete axle set, pre-boxed as full axle set of 4

DISC BRAKE ASSY 10" 5L [NO CAL] EA.

UFP

includes : PD2250 LUG NUT 13/16" qty: 5 PD1400 BEARING 1-1/16" [44649] qty: 1 PD1450 BEARING 1-3/8" [68149] qty: 1 PD2055 SEAL 1-3/8"[UFP][257-168] qty: 1 PG2026-1 DISC ROTOR & HUB 10" 5L PLTD UFP bearing protectors sold separately

HYDRAULIC RUBBER BRAKE HOSES

15 sizes available

PG1030 COMPLETE 5-LUG DISC BRAKE KIT ≤7.5K TOP-MOUNT (DEXTER / UFP)

REPRESENTATION PHOTO IF YOU WANT TO ADD BRAKES TO A TRAILER THAT WAS NEVER EQUIPPED WITH THEM, MAKE SURE THERE IS AT LEAST FOUR-INCHES OF CLEARANCE FROM THE BRAKE MOUNTING PLATE ON THE AXLE OR TORSION ARM TO THE OUTSIDE EDGE OF THE FRAME. MAGIC TILT BRAKE KIT ~ PG1030 NEW TOP-MOUNT ACTUATOR REPLACES THE PG1088 INLINE 3-HOLE ACTUATOR ON 3" TALL TONGUES. NEW HOLES WILL NEED TO BE DRILLED IN THE TRAILER TONGUE. COMES WITH PG4856 DOUBLE BANJO FITTING TO CONNECT BRAKE LINES. UFP SPINDLE MOUNTING HARDWARE (NOT INCLUDED): PH2125 IF USING ON NON-UFP AXLES WITH 1" SPINDLE THREADS YOU WILL NEED THE PH2160 CONVERSION KIT (NOT INCLUDED). ADDITIONAL AXLE(S) BRAKE KIT PG1040 (NOT INCLUDED) INCLUDES: 2 x BEARING 1-1/16" (44649) 2 x BEARING 1-3/8" (68149) 2 x SEAL 1-3/8" UFP (257-168) 1 x BEARING PROTECTOR SET SS 1.980 1 x PG1072 ACTUATOR TOP MOUNT DISC DEMCO #7,000 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 8' 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 23' 2 x PG2026-1 DISC ROTOR AND HUB 10" 5-LUG UFP 1 x CALIPER FITTING PLUG UFP #32212 1 x PG5003 DISC BRAKE CALIPER ASSEMBLY LH UFP DB3 (DOUBLE BANJO FITTING) 1 x PG5005 DISC BRAKE CALIPER ASSEMBLY RH UFP DB3 (DOUBLE BANJO FITTING) 4 x 7/16" x 1" SHCS BOLT UFP DISC CALIPER 1 x PL2128 5-WAY FULL GROUND WIRE HARNESS 30' 6 x PLASTIC WIRE TIE HD 14-1/2" 2 x 1/4" CHAIN W/ ONE HOOK 40" 3 x CAPSCREW PLATED NC 1/2 x 4-1/2 GR5 3 x NUT LOCK NI 1/2-13 PLATED OWNERS MANUAL

PG1031 COMPLETE 5-LUG DISC BRAKE KIT ≤7.5K IN-LINE (DEXTER / UFP)

REPRESENTATION PHOTO IF YOU WANT TO ADD BRAKES TO A TRAILER THAT WAS NEVER EQUIPPED WITH THEM, MAKE SURE THERE IS AT LEAST FOUR-INCHES OF CLEARANCE FROM THE BRAKE MOUNTING PLATE ON THE AXLE OR TORSION ARM TO THE OUTSIDE EDGE OF THE FRAME. MAGIC TILT BRAKE KIT ~ PG1031 COMES WITH PG4856 DOUBLE BANJO FITTING TO CONNECT BRAKE LINES. IF USING ON NON-UFP AXLES WITH 1" SPINDLE THREADS YOU WILL NEED THE PH2160 CONVERSION KIT (NOT INCLUDED) UFP SPINDLE MOUNTING HARDWARE (NOT INCLUDED): PH2125 ADDITIONAL AXLE(S) BRAKE KIT PG1040 (NOT INCLUDED) INCLUDES: 2 x BEARING 1-1/16" (44649) 2 x BEARING 1-3/8" (68149) 2 x SEAL 1-3/8" UFP (257-168) 1 x BEARING PROTECTOR SET SS 1.980 1 x PG1090 ACTUATOR IN-LINE DISC UFP #7500 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 8' 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 23' 2 x PG2026-1 DISC ROTOR AND HUB 10" 5-LUG UFP 1 x CALIPER FITTING PLUG UFP #32212 1 x PG5003 DISC BRAKE CALIPER ASSEMBLY LH UFP DB3 (DOUBLE BANJO FITTING) 1 x PG5005 DISC BRAKE CALIPER ASSEMBLY RH UFP DB3 (DOUBLE BANJO FITTING) 4 x 7/16" x 1" SHCS BOLT UFP DISC CALIPER 1 x PL2128 5-WAY FULL GROUND WIRE HARNESS 30' 6 x PLASTIC WIRE TIE HD 14-1/2" 2 x 1/4" CHAIN W/ ONE HOOK 40" 4 x CAPSCREW PLATED NC 1/2 x 4-1/2 GR5 4 x NUT LOCK NI 1/2-13 PLATED OWNERS MANUAL

PG1033 COMPLETE 5-LUG DISC BRAKE KIT 7.5K TO 16K (DEXTER / UFP)

REPRESENTATION PHOTO IF YOU WANT TO ADD BRAKES TO A TRAILER THAT WAS NEVER EQUIPPED WITH THEM, MAKE SURE THERE IS AT LEAST FOUR-INCHES OF CLEARANCE FROM THE BRAKE MOUNTING PLATE ON THE AXLE OR TORSION ARM TO THE OUTSIDE EDGE OF THE FRAME. MAGIC TILT BRAKE KIT ~ PG1033 COMES WITH PG4856 DOUBLE BANJO FITTING TO CONNECT BRAKE LINES. UFP SPINDLE MOUNTING HARDWARE (NOT INCLUDED): PH2125 IF USING ON NON-UFP AXLES WITH 1" SPINDLE THREADS YOU WILL NEED THE PH2160 CONVERSION KIT (NOT INCLUDED) ADDITIONAL AXLE(S) BRAKE KIT PG1040 (NOT INCLUDED) INCLUDES: 2 x BEARING 1-1/16" (44649) 2 x BEARING 1-3/8" (68149) 2 x SEAL 1-3/8" UFP (257-168) 2 x BEARING PROTECTOR 1.980 STAINLESS 1 x PG1095 ACTUATOR IN-LINE DISC #16,000 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 8' 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 23' 2 x PG2026-1 DISC ROTOR AND HUB 10" 5-LUG UFP 1 x CALIPER FITTING PLUG UFP #32212 1 x PG5003 DISC BRAKE CALIPER ASSEMBLY LH UFP (DOUBLE BANJO FITTING) 1 x PG5005 DISC BRAKE CALIPER ASSEMBLY RH UFP (DOUBLE BANJO FITTING) 4 x 7/16" x 1" CALIPER BOLT UFP 1 x PL2128 5-WAY HARNESS 30' 6 x PLASTIC WIRE TIE HD 14-1/2" 2 x 1/4" CHAIN W/ ONE HOOK 40" 4 x CAPSCREW PLATED NC 1/2 x 4-1/2 GR5 4 x NUT LOCK NI 1/2-13 PLATED OWNERS MANUAL

PG1037 COMPLETE 6-LUG DISC BRAKE KIT 10K TO 16K (DEXTER / UFP)

REPRESENTATION PHOTO IF YOU WANT TO ADD BRAKES TO A TRAILER THAT WAS NEVER EQUIPPED WITH THEM, MAKE SURE THERE IS AT LEAST FOUR-INCHES OF CLEARANCE FROM THE BRAKE MOUNTING PLATE ON THE AXLE OR TORSION ARM TO THE OUTSIDE EDGE OF THE FRAME. MAGIC TILT BRAKE KIT ~ PG1037 COMES WITH PG4856 DOUBLE BANJO FITTING TO CONNECT BRAKE LINES. UFP SPINDLE MOUNTING HARDWARE (NOT INCLUDED): PH2130 IF USING ON NON-UFP AXLES WITH 1" SPINDLE THREADS YOU WILL NEED THE PH2165 CONVERSION KIT (NOT INCLUDED) ADDITIONAL AXLE(S) BRAKE KIT PG1042 (NOT INCLUDED) INCLUDES: 2 x BEARING 1-1/4" UFP 2 x BEARING 1-3/4" UFP (25580) 2 x SEAL 1-3/4" UFP (21333) 2 x PF1101 STAINLESS BEARING PROTECTOR 2.441" 1 x PG1095 ACTUATOR DISC UFP #16,000 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 8' 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 23' 2 x PG2027-1 DISC ROTOR AND HUB 12" 6-LUG UFP 1 x CALIPER FITTING PLUG UFP #32212 1 x PG5003 DISC BRAKE CALIPER ASSEMBLY LH UFP DB3 (DOUBLE BANJO FITTING) 1 x PG5005 DISC BRAKE CALIPER ASSEMBLY RH UFP DB3 (DOUBLE BANJO FITTING) 4 x DISC CALIPER BOLT 7/16" x 1" SHCS (UFP) 1 x PL2128 5-WAY FULL GROUND WIRE HARNESS 30' 6 x PLASTIC WIRE TIE HD 14-1/2" 2 x CHAIN W/ ONE HOOK 40" 4 x CAPSCREW PLATED NC 1/2" x 4-1/2" GR5 4 x NUT LOCK NI 1/2-13 PLATED OWNERS MANUAL

PG1038 COMPLETE 8-LUG DISC BRAKE KIT 12K TO 20K (DEXTER / UFP)

REPRESENTATION PHOTO IF YOU WANT TO ADD BRAKES TO A TRAILER THAT WAS NEVER EQUIPPED WITH THEM, MAKE SURE THERE IS AT LEAST FOUR-INCHES OF CLEARANCE FROM THE BRAKE MOUNTING PLATE ON THE AXLE OR TORSION ARM TO THE OUTSIDE EDGE OF THE FRAME. MAGIC TILT BRAKE KIT ~ PG1038 TANDEM 8,000-POUND (8-LUG) AXLE TRAILERS COMES WITH PG4856 DOUBLE BANJO FITTING TO CONNECT BRAKE LINES. UFP SPINDLE MOUNTING HARDWARE (NOT INCLUDED): PH2130 IF USING ON NON-UFP AXLES WITH 1" SPINDLE THREADS YOU WILL NEED THE PH2165 CONVERSION KIT (NOT INCLUDED) ADDITIONAL AXLE(S) BRAKE KIT PG1044 (NOT INCLUDED) INCLUDES: 2 x BEARING 1-1/4" UFP 2 x BEARING 1-3/4" UFP (25580) 2 x SEAL 1-3/4" UFP (21333) 1 x BEARING PROTECTOR SET SS 2.717 1 x PG1096 DEMCO ACTUATOR DISC #20000 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 8' 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 23' 2 x PG2028-1 DISC ROTOR AND HUB 12" 8-LUG UFP 1 x CALIPER FITTING PLUG UFP #32212 1 x PL2142 5-WAY FULL GROUND WIRE HARNESS 40' 1 x PG5003 DISC BRAKE CALIPER ASSEMBLY LH UFP DB3 (DOUBLE BANJO FITTING) 1 x PG5005 DISC BRAKE CALIPER ASSEMBLY RH UFP DB3 (DOUBLE BANJO FITTING) 4 x DISC CALIPER BOLT 7/16" x 1" SHCS (UFP) 6 x PLASTIC WIRE TIE HD 14-1/2" 2 x CHAIN W/ ONE HOOK 40" 4 x CAPSCREW PLATED NC 1/2" x 4-1/2" GR5 4 x NUT LOCK NI 1/2-13 PLATED OWNERS MANUAL

PG1040 ADDITIONAL AXLE 5-LUG DISC BRAKE KIT (DEXTER / UFP)

REPRESENTATION PHOTO IF YOU WANT TO ADD BRAKES TO A TRAILER THAT WAS NEVER EQUIPPED WITH THEM, MAKE SURE THERE IS AT LEAST FOUR-INCHES OF CLEARANCE FROM THE BRAKE MOUNTING PLATE ON THE AXLE OR TORSION ARM TO THE OUTSIDE EDGE OF THE FRAME. MAGIC TILT BRAKE KIT ~ PG1040 COMES WITH PG4856 DOUBLE BANJO FITTING TO CONNECT BRAKE LINES. UFP SPINDLE MOUNTING HARDWARE (NOT INCLUDED): PH2125 IF USING ON NON-UFP AXLES WITH 1" SPINDLE THREADS YOU WILL NEED THE PH2160 CONVERSION KIT (NOT INCLUDED) INCLUDES: 2 x BEARING 1-1/16" (44649) 2 x BEARING 1-3/8" (68149) 2 x SEAL 1-3/8" UFP (257-168) 1 x BEARING PROTECTOR SET SS 1.980 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 4' 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 8' 2 x PG2026-1 DISC ROTER AND HUB 10" 5-LUG UFP 1 x CALIPER FITTING PLUG UFP #32212 1 x PG5003 DISC BRAKE CALIPER ASSEMBLY LH UFP DB3 (DOUBLE BANJO FITTING) 1 x PG5005 DISC BRAKE CALIPER ASSEMBLY RH UFP DB3 (DOUBLE BANJO FITTING) 4 x DISC CALIPER BOLT 7/16" x 1" SHCS (UFP) 6 x PLASTIC WIRE TIE HD 14-1/2" OWNERS MANUAL

PG1042 ADDITIONAL AXLE 6-LUG DISC BRAKE KIT (DEXTER / UFP)

REPRESENTATION PHOTO IF YOU WANT TO ADD BRAKES TO A TRAILER THAT WAS NEVER EQUIPPED WITH THEM, MAKE SURE THERE IS AT LEAST FOUR-INCHES OF CLEARANCE FROM THE BRAKE MOUNTING PLATE ON THE AXLE OR TORSION ARM TO THE OUTSIDE EDGE OF THE FRAME. MAGIC TILT BRAKE KIT ~ PG1042 COMES WITH PG4856 DOUBLE BANJO FITTING TO CONNECT BRAKE LINES. UFP SPINDLE MOUNTING HARDWARE (NOT INCLUDED): PH2130 IF USING ON NON-UFP AXLES WITH 1" SPINDLE THREADS YOU WILL NEED THE PH2165 CONVERSION KIT (NOT INCLUDED) INCLUDES: 2 x BEARING 1-1/4" 2 x BEARING 1-3/4" (25580) 2 x SEAL 1-3/4" UFP (21333) 2 x PF1101 STAINLESS BEARING PROTECTOR 2.441" 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 4' 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 8' 2 x PG2027-1 DISC ROTER AND HUB 12" 6-LUG UFP 1 x CALIPER FITTING PLUG UFP #32212 1 x PG5003 DISC BRAKE CALIPER ASSEMBLY LH UFP DB3 (DOUBLE BANJO FITTING) 1 x PG5005 DISC BRAKE CALIPER ASSEMBLY RH UFP DB3 (DOUBLE BANJO FITTING) 4 x DISC CALIPER BOLT 7/16" x 1" SHCS (UFP) 6 x PLASTIC WIRE TIE HD 14-1/2" OWNERS MANUAL

PG1044 ADDITIONAL AXLE 8-LUG DISC BRAKE KIT (DEXTER / UFP)

REPRESENTATION PHOTO IF YOU WANT TO ADD BRAKES TO A TRAILER THAT WAS NEVER EQUIPPED WITH THEM, MAKE SURE THERE IS AT LEAST FOUR-INCHES OF CLEARANCE FROM THE BRAKE MOUNTING PLATE ON THE AXLE OR TORSION ARM TO THE OUTSIDE EDGE OF THE FRAME. MAGIC TILT BRAKE KIT ~ PG1044 COMES WITH PG4856 DOUBLE BANJO FITTING TO CONNECT BRAKE LINES. UFP SPINDLE MOUNTING HARDWARE (NOT INCLUDED): PH2130 IF USING ON NON-UFP AXLES WITH 1" SPINDLE THREADS YOU WILL NEED THE PH2165 CONVERSION KIT (NOT INCLUDED) INCLUDES: 2 x BEARING 1-1/4" 2 x BEARING 1-3/4" (25580) 2 x SEAL 1-3/4" UFP (21333) 2 x BEARING PROTECTOR 2.328 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 4' 1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 8' 1 x PG2028-1 DISC ROTER AND HUB 12" 8-LUG UFP 2 x CALIPER FITTING PLUG UFP #32212 1 x PG5003 DISC BRAKE CALIPER ASSEMBLY LH UFP DB3 (DOUBLE BANJO FITTING) 1 x PG5005 DISC BRAKE CALIPER ASSEMBLY RH UFP DB3 (DOUBLE BANJO FITTING) 4 x DISC CALIPER BOLT 7/16" x 1" SHCS (UFP) 6 x PLASTIC WIRE TIE HD 14-1/2" OWNERS MANUAL

PG1075 ~ BRAKE LOCKOUT PLUG A60/75 ACTUATORS DEXTER / UFP

REPRESENTATION PHOTO MAGIC TILT BRAKE LOCKOUT PLUG ~ PG1075 CAUTION! IF LOCKOUT IS NOT REMOVED DURING NORMAL TOWING THE TRAILER'S BRAKES WILL NOT FUNCTION. CUSTOMER ASSUMES RESPONSIBILITY FOR SAFE USAGE. ALLOWS TRAILERS WITH DEXTER / UFP IN-LINE SURGE DISC BRAKES TO BE BACKED UP WHILE NOT PLUGGED INTO THE VEHICLE. WORKS WITH ALL UFP A60/75 7.5K IN-LINE DISC BRAKE ACTUATORS. FOR A-160 16K ACTUATORS, USE THE PG1090-1 CLIP OWNERS MANUAL

PG1166 ~ BRAKE LINE COUPLER

REPRESENTATION PHOTO MAGIC TILT BRAKE LINE COUPLER ~ PG1166

PG1175 ~ HYDRAULIC BRAKE T-FITTING

REPRESENTATION PHOTO MAGIC TILT HYDRAULIC BRAKE T-FITTING ~ PG1175

PG1332 ~ BRAKE LINE KIT TO ADD SECOND AXLE SINGLE-BANJO

REPRESENTATION PHOTO MAGIC TILT BRAKE LINE KIT SECOND AXLE ~ PG1332 INCLUDES: 2 x PG1175 T-FITTINGS 2 x PG1178 1' BRAKE HOSE WITH SWIVEL 1 x PG1182 4' BRAKE HOSE WITH SWIVEL 1 x PG1183 6' 6" BRAKE HOSE WITH SWIVEL 6 x PL2954 14-1/2" PLASTIC WIRE TIES

PG1332-1 ~ BRAKE LINE KIT TO ADD SECOND AXLE DOUBLE-BANJO

REPRESENTATION PHOTO MAGIC TILT BRAKE LINE KIT SECOND AXLE ~ PG1332-1 INCLUDES: 1 x PG4862 BRAKE CALIPER FITTING PLUG 1 x PG1182 4' BRAKE HOSE WITH SWIVEL 1 x PG1186 8' BRAKE HOSE WITH SWIVEL 6 x PL2954 14" PLASTIC WIRE TIES

PG1334 ~ BRAKE LINE KIT TO ADD SECOND & THIRD AXLES SINGLE-BANJO

REPRESENTATION PHOTO MAGIC TILT BRAKE LINE KIT SECOND & THIRD AXLE ~ PG1334 INCLUDES: 4 x PG1175 T-FITTING 3 x PG1178 1' BRAKE HOSE WITH SWIVEL 2 x PG1182 4' BRAKE HOSE WITH SWIVEL 2 x PG1183 6' 6" BRAKE HOSE WITH SWIVEL 12 x PL2954 14" PLASTIC WIRE TIE

PG1334-1 ~ BRAKE LINE KIT TO ADD SECOND & THIRD AXLES DBL-BANJO

REPRESENTATION PHOTO MAGIC TILT BRAKE LINE KIT SECOND & THIRD AXLE ~ PG1334-1 INCLUDES: 1 x PG4862 CALIPER FIITING PLUG 2 x PG1182 4' BRAKE HOSE WITH SWIVEL 2 x PG1186 8' BRAKE HOSE WITH SWIVEL 12 x PL2954 14" PLASTIC WIRE TIE

PG2035 DISC BRAKE ASSEMBLY 8-LUG (DEXTER / UFP)

REPRESENTATION PHOTO IF YOU WANT TO ADD BRAKES TO A TRAILER THAT WAS NEVER EQUIPPED WITH THEM, MAKE SURE THERE IS AT LEAST FOUR-INCHES OF CLEARANCE FROM THE BRAKE MOUNTING PLATE ON THE AXLE OR TORSION ARM TO THE OUTSIDE EDGE OF THE FRAME. MAGIC TILT DISC BRAKE ASSEMBLY ~ PG2035 COMES WITH PG4856 DOUBLE BANJO FITTING TO CONNECT BRAKE LINES. UFP SPINDLE MOUNTING HARDWARE (NOT INCLUDED): PH2130 IF USING ON NON-UFP AXLES WITH 1" SPINDLE THREADS YOU WILL NEED THE PH2165 CONVERSION KIT (NOT INCLUDED) INCLUDES: 16 x LUG NUT 13/16" 2 x BEARING 1-1/4" (67048) 2 x BEARING 1-3/4" (25580) 2 x SEAL 1-3/4" UFP (21333) 1 x BEARING PROTECTOR SET 2.717 2 x PG2028-1 DISC ROTOR AND HUB 12" 8-LUG UFP 1 x PG5003 DISC BRAKE CALIPER ASSEMBLY LH UFP DB3 (DOUBLE BANJO FITTING) 1 x PG5005 DISC BRAKE CALIPER ASSEMBLY RH UFP DB3 (DOUBLE BANJO FITTING) 4 x 7/16" x 1" SHCS BOLT UFP DISC CALIPER 2 x COTTER PIN 1/8" x 1-1/4" UFP OWNERS MANUAL

PG2070-L ~ DISC BRAKE ASSEMBLY 5-LUG GREASED (DEXTER / UFP)

To Add brakes to a trailer that was never equipped with them, Confirm there is At least four-inches of clearance from the brake mounting plate on the axle or torsion arm to the outside edge of the frame. Magic Tilt Brake Assembly ~ PG2070-L Good to know: - Bearings, Races and seals are installed in rotors and greased (Ready-To-Go). - 2 x PE2050 Replacement Seals are in the box (Loose) To accomodate non-UFP spindles if needed. Customer is responsible for determination. - Ships with PG4856 Double banjo fittings to connect brake lines. - Includes UFP hub mounting hardware. If using on non-UFP axles with 1" Spindle Threads you'll also need the PH2160 Conversion Kit (Not Included). Included in this kit: 10 x PD2250 Lug Nut 13/16" 2 x PE1400 Bearing 1-1/16" (44649) - Installed 2 x PE1450 Bearing 1-3/8" (68149) - Installed 2 x PE2055 Seal 2.57" x 1.68" UFP (257-168) - Installed 2 x PF1054 Bearing Protector SS 1.980 2 x PF1060 Bearing Protector Bra 1.980 2 x PG2026-1 Disc Rotor And Hub 10" 5-Lug Plated UFP 1 x PG5003 Disc brake caliper assembly LH UFP db3 (Double Banjo Fitting) 1 x PG5005 Disc brake caliper assembly RH UFP db3 (Double Banjo Fitting) 4 x PG5007 Disc Caliper Bolt 7/16" x 1" Shcs (UFP) 2 x PH2012 Cotter Pin 1/8" x 1-1/4" Plated UFP 1 x PG4862 Caliper Fitting Plug Brass 2 x PH1980 Spindle Nut 13/16" UFP 2 x PH2108 Spindle Nut Retainer UFP 2 x PH2065 Axle D-Washer 3/4" x 3/32" UFP 2 x PE2050 Seal 2.55" x 1.71" Non-UFP - Loose Owners Manual

PG2071-L ~ DISC BRAKE ASSEMBLY 6-LUG GREASED (DEXTER / UFP)

REPRESENTATION PHOTO IF YOU WANT TO ADD BRAKES TO A TRAILER THAT WAS NEVER EQUIPPED WITH THEM, MAKE SURE THERE IS AT LEAST FOUR-INCHES OF CLEARANCE FROM THE BRAKE MOUNTING PLATE ON THE AXLE OR TORSION ARM TO THE OUTSIDE EDGE OF THE FRAME. MAGIC TILT DISC BRAKE ASSEMBLY ~ PG2071-L - BEARINGS, RACES AND SEALS ARE INSTALLED IN ROTORS AND GREASED (READY-TO-GO). - 2 x PE2100 REPLACEMENT SEALS ARE INCLUDED (LOOSE) TO ACCOMODATE NON-UFP SPINDLES IF NEEDED. CUSTOMER IS RESPONSIBLE FOR DETERMINATION. - COMES WITH PG4856 DOUBLE BANJO FITTING TO CONNECT BRAKE LINES. - INCLUDES UFP HUB MOUNTING HARDWARE. IF USING ON NON-UFP AXLES WITH 1" SPINDLE THREADS YOU WILL NEED THE PH2165 CONVERSION KIT (NOT INCLUDED). INCLUDES: 12 x PD2250 LUG NUT 13/16" 2 x PE1550 BEARING 1-1/4" (15123) - INSTALLED 2 x PE1600 BEARING 1-3/4" (25580) - INSTALLED 2 x PE2101 SEAL 3.37" x 2.13" UFP (21333) - INSTALLED 2 x PF1101 BEARING PROTECTOR SS 2.441" 2 x PF1063 BEARING PROTECTOR BRA 2.441" 2 x PG2027-1 DISC ROTOR AND HUB 12" 6-LUG PLATED UFP 1 x PG500 3 DISC BRAKE CALIPER ASSEMBLY LH UFP DB3 (DOUBLE BANJO FITTING) 1 x PG5005 DISC BRAKE CALIPER ASSEMBLY RH UFP DB3 (DOUBLE BANJO FITTING) 4 x PG5007 DISC CALIPER BOLT 7/16" x 1" SHCS (UFP) 2 x PH2012 COTTER PIN 1/8" x 1-1/4" PLATED UFP 1 x PG4862 CALIPER FITTING PLUG BRASS 2 x PH1980 SPINDLE NUT 13/16" UFP 2 x PH2108 SPINDLE NUT RETAINER UFP 2 x PH2066 AXLE D-WASHER 3/4" x 3/16" UFP 2 x PE2100 SEAL 3.37" x 2.23" NON-UFP - LOOSE OWNERS MANUAL

PG2252 ~ REVERSE LOCKOUT SOLENOID

REPRESENTATION PHOTO MAGIC TILT REVERSE LOCKOUT SOLENOID ~ PG2252 CAN BE USED WHEN CONVERTING A DRUM ACTUATOR FOR DISC BRAKE USE. MAY SHIP FROM STORE LOCATION

PG4849 ~ DISC BRAKE PAD DEXTER / UFP 1-PAD ONLY

REPRESENTATION PHOTO MAGIC TILT BRAKE PAD ~ PG4849 SOLD INDIVIDUALLY CONTAINS ONLY ONE BRAKE PAD. ORDER TWO TO OUTFIT ONE CALIPER. CAN ONLY BE USED ON DEXTER/UFP BRAKE SYSTEMS

PG4855 ~ SINGLE BANJO FITTING

REPRESENTATION PHOTO MAGIC TILT SINGLE BANJO FITTING ~ PG4855 REQUIRES TWO COPPER WASHERS (PG4858) AND ONE BANJO BOLT (PG4857)

PG4856 ~ DOUBLE BANJO FITTING

REPRESENTATION PHOTO MAGIC TILT DOUBLE BANJO FITTING ~ PG4856 REQUIRES TWO COPPER WASHERS (PG4858) AND ONE BANJO BOLT (PG4857)

PG5034 ~ DISC BRAKE CALIPER 3.5

6K (DEEMAXX CALP-3-6K-MAXX)

REPRESENTATION PHOTO MAGIC TILT DISC BRAKE CALIPER ~ PG5034 APPLICATION: 3.5K 10" 5-LUG AND 6K 12" 6-LUG DEEMAXX BRAKING SYSTEMS WITH SLIP-OVER ROTORS OR ONE-PIECE HUB/ROTORS WITH CORRECT MOUNT PLATE (NOT INCLUDED) INCLUDES BRAKE PADS NOT COMPATIBLE OTHER BRAKE BRANDS

PH1849 ~ SPINDLE 1-1/16" x 1-3/8" 3.5K DEXTER / UFP

REPRESENTATION PHOTO MAGIC TILT SPINDLE ~ PH1849

PL2253 ~ 7-WAY TO 5-WAY ADAPTER PLUG

REPRESENTATION PHOTO MAGIC TILT ADAPTER PLUG ~ PL2253 FOR USE WITH TRAILERS WITH HYDRAULIC SURGE BRAKES

Universal Brake Pad -Pair

Universal Brake Pad -Pair (2 Pads) Fits UFP DB-35 Caliper