Winches, Winch Posts and Guides

10" Keel Rolls

2 sizes available

12" Keel Rolls

3 sizes available

2-PC BOW REST ASSY

3 sizes available

219-00055-NA ~ SINGLE-EYE HOOK SPRING 27-1/2" KARAVAN

REPRESENTATION PHOTO MAGIC TILT LEAF SPRING ~ 219-00055-NA SINGLE-EYE HOOK SPRINGS ARE MEASURED FROM THE CENTER OF THE FRONT EYE TO THE END OF THE HOOK. INCLUDES .58" ID NYLON SPRING BUSHINGS (ALLOWS FOR GALVANIZED 1/2" BOLT) DOES NOT INCLUDE MOUNTING HARDWARE MOUNTING HARDWARE KITS HARDWARE KITS SPRING EYE BOLT PK1450

5/8" Shafts

3 sizes available

Airboat Guide Poles

2 sizes available

BOATBUCKLE RETRACTABLE S/S TRANSOM TIEDOWN PAIR

RETRACTABLE S/S TRANSOM TIEDOWN

BOW EYE SAFETY CHAIN

5 sizes available

BOW REST ASSY W/BMPR

5 sizes available

BOW REST ASSY W/WOOD

REST ASSY W/WOOD[ALOHA ONLY]

Bow Stop Rollers

8 sizes available

Clamp-On Sockets

3 sizes available

Width4"

COTTER PINS

COTTER PIN 1/8"X1-1/4"[UFP AXLE]

Double Eye Springs

4 sizes available

End Caps Bell

12 sizes available

Guide Components

3 sizes available

KEEL ROLL BRACKET ASSY

2 sizes available

SKUPS1310-1

Ladders

ALUM TONGUE MOUNTED ASSY

Comes with Hardware to mount

PH1980 ~ SPINDLE NUT 13/16"

REPRESENTATION PHOTO MAGIC TILT SPINDLE NUT ~ PH1980 SOLD INDIVIDUALLY

PH2000 ~ SPINDLE NUT 1"

REPRESENTATION PHOTO MAGIC TILT SPINDLE NUT ~ PH2000 SOLD INDIVIDUALLY

PH2108 ~ SPINDLE NUT RETAINER

REPRESENTATION PHOTO MAGIC TILT SPINDLE NUT RETAINER ~ PH2108 SOLD INDIVIDUALLY

PJ1350 ~ DOUBLE-EYE SPRING 20"

REPRESENTATION PHOTO MAGIC TILT LEAF SPRING ~ PJ1350 # LEAF: 3 DOUBLE-EYE SPRINGS ARE MEASURED FROM THE CENTER OF THE FRONT EYE TO THE CENTER OF THE REAR EYE. INCLUDES .58" ID NYLON SPRING BUSHINGS (ALLOWS FOR GALVANIZED 1/2" BOLT) DOES NOT INCLUDE MOUNTING HARDWARE MOUNTING HARDWARE KITS HARDWARE KITS

PK1000 ~ 1-AXLE MOUNT KIT 1-EYE 1-1/2" AXLE GALVANIZED

REPRESENTATION PHOTO MAGIC TILT SINGLE AXLE MOUNT KIT ~ PK1000 Provides all necessary hardware to mount single-eye springs on one 1-1/2" square axle. FOR CORRECT U-BOLT, SELECT NUMBER OF SPRING LEAVES IN DROP-DOWN INCLUDES: 2 x PK1200 3-HOLE PLATES GALVANIZED 2 x CAPSCREW 1/2" x 3-1/2" GR 5 PLATED 2 x NUT NYLOC 1/2-13 PLATED 4 x NUT HEX 1/2-13 GALVANIZED 4 x WASHER FLAT 1/2" GALVANIZED 4 x WASHER LOCK 1/2" GALVANIZED 2 x U-BOLT 1/2" x 2-3/4" x SELECT GALVANIZED

PK1050 ~ 1-AXLE MOUNT KIT 1-EYE 2x2 AXLE GALVANIZED

REPRESENTATION PHOTO MAGIC TILT SINGLE AXLE MOUNT KIT ~ PK1050 PROVIDES ALL NECESSARY HARDWARE TO MOUNT SINGLE-EYE SPRINGS ON ONE 2" SQUARE AXLE FOR CORRECT U-BOLT, SELECT NUMBER OF SPRING LEAVES IN DROP-DOWN 3, 4, 5, 6 INCLUDES: 2 x PK1250 5-HOLE PLATES GALV 2 x CAPSCREW 1/2" x 3-1/2" GR 5 PLATED 2 x NUT NYLOCK 1/2-13 PLATED 8 x NUT HEX 1/2-13 GALV 8 x WASHER FLAT USS 1/2" GALV 8 x WASHER LOCK 1/2" GALV 4 x U-BOLT 1/2" x 2-1/16" x SELECT GALV

PK1050-1 ~ 1-AXLE MOUNT KIT 1-EYE 2x3 AXLE GALVANIZED

REPRESENTATION PHOTO MAGIC TILT SINGLE AXLE MOUNT KIT ~ PK1050-1 PROVIDES ALL NECESSARY HARDWARE TO MOUNT SINGLE-EYE SPRINGS ON ONE 2" x 3" AXLE FOR CORRECT U-BOLT, SELECT NUMBER OF SPRING LEAVES IN DROP-DOWN 3, 4, 5, 6 INCLUDES: 2 x PK1250 5-HOLE PLATES GALV 2 x CAPSCREW 1/2" x 3-1/2" GR 5 PLATED 2 x NUT NYLOCK 1/2-13 PLATED 8 x NUT HEX 1/2-13 GALV 8 x WASHER FLAT USS 1/2" GALV 8 x WASHER LOCK 1/2" GALV 4 x U-BOLT 1/2" x 2-1/16" x SELECT GALV

PK1100 ~ 1-AXLE MOUNT KIT 2-EYE 2x2 AXLE GALVANIZED

REPRESENTATION PHOTO MAGIC TILT SINGLE AXLE MOUNT KIT ~ PK1100 Provides all necessary hardware to mount double-eye springs on one 2" square axle. FOR CORRECT U-BOLT, SELECT NUMBER OF SPRING LEAVES IN DROP-DOWN 3, 4, 5, 6 INCLUDES: 2 x PK1250 5-HOLE PLATES GALV 4 x PK1300 2-HOLE SHACKLE PLATE GALV 2 x SPACER DOUBLE EYE SPRING 1-3/4" ALUM 6 x CAPSCREW 1/2" x 3-1/2" GR 5 PLATED 6 x NUT NYLOCK 1/2-13 PLATED 8 x NUT HEX 1/2-13 GALV 12 x WASHER FLAT USS 1/2" GALV 8 x WASHER LOCK 1/2" GALV 4 x U-BOLT 1/2" x 2-1/16" x SELECT GALV

PK1100-1 ~ 1-AXLE MOUNT KIT 2-EYE 2x3 AXLE GALVANIZED

REPRESENTATION PHOTO MAGIC TILT SINGLE AXLE MOUNT KIT ~ PK1100-1 Provides all necessary hardware to mount double-eye springs on one 2" x 3" square axle. FOR CORRECT U-BOLT, SELECT NUMBER OF SPRING LEAVES IN DROP-DOWN 3, 4, 5, 6 INCLUDES: 2 x PK1250 5-HOLE PLATE GALV 4 x PK1300 2-HOLE SHACKLE PLATE GALV 2 x SPACER D-EYE SPRING 1-3/4" ALUM 6 x GRADE-5 BOLT (1/2" x 3-1/2") PLATED 6 x 1/2" NYLOCK NUT PLATED 8 x 1/2" HEX NUT GALV 12 x 1/2" FLAT WASHER GALV 8 x 1/2" LOCK WASHER GALV 4 x SQUARE U-BOLT 1/2" x 2-1/16" x SELECT GALV

PK1150 ~ 2-AXLE MOUNT KIT 2-EYE 2x2 AXLE GALVANIZED

REPRESENTATION PHOTO MAGIC TILT TANDEM AXLE MOUNT KIT ~ PK1150 Provides all necessary hardware to mount double-eye springs on two 2" square axles. SPRING TYPE DOUBLE-EYE FOR CORRECT U-BOLT, SELECT NUMBER OF SPRING LEAVES IN DROP-DOWN 3, 4, 5, 6 INCLUDES: 4 x PK1250 5-HOLE PLATES GALV 8 x PK1300 2-HOLE SHACKLE PLATE GALV 12 x CAPSCREW 1/2" x 3-1/2" GR 5 PLATED 2 x CAPSCREW 1/2" x 4" GR 5 PLATED 14 x NUT NYLOCK 1/2-13 PLATED 16 x NUT HEX 1/2-13 GALV 28 x WASHER FLAT USS 1/2" GALV 16 x WASHER LOCK 1/2" GALV 8 x U-BOLT 1/2" x 2-1/16" x SELECT GALV

PK1150-SS ~ 2-AXLE MOUNT KIT 2-EYE 2x2 AXLE STAINLESS / GALV

REPRESENTATION PHOTO MAGIC TILT TANDEM AXLE MOUNT KIT ~ PK1150-SS Provides all necessary hardware to mount double-eye springs on two 2" square axles. FOR CORRECT U-BOLT, SELECT NUMBER OF SPRING LEAVES IN DROP-DOWN 3, 4, 5, 6 INCLUDES: 4 x PK1250 5-HOLE PLATES GALV 8 x PK1300 2-HOLE SHACKLE PLATE GALV 12 x CAPSCREW 1/2" x 3-1/2" GR 5 PLATED 2 x CAPSCREW 1/2" x 4" GR 5 PLATED 14 x NUT NYLOCK 1/2-13 PLATED 16 x NUT HEX 1/2-13 STAINLESS 28 x WASHER FLAT USS 1/2" GALV 16 x WASHER LOCK 1/2" STAINLESS 8 x U-BOLT 1/2" x 2-1/16" x SELECT STAINLESS

PK1152 ~ 2-AXLE MOUNT KIT 2-EYE 2x3 AXLE GALVANIZED

REPRESENTATION PHOTO MAGIC TILT TANDEM AXLE MOUNT KIT ~ PK1152 Provides all necessary hardware to mount double-eye springs on two 2" x 3" axles. FOR CORRECT U-BOLT, SELECT NUMBER OF SPRING LEAVES IN DROP-DOWN 3, 4, 5, 6 INCLUDES: 4 x PK1250 5-HOLE PLATES GALV 8 x PK1300 2-HOLE SHACKLE PLATE GALV 12 x CAPSCREW 1/2" x 3-1/2" GR 5 PLATED 2 x CAPSCREW 1/2" x 4" GR 5 PLATED 14 x NUT NYLOCK 1/2-13 PLATED 16 x NUT HEX 1/2-13 GALV 28 x WASHER FLAT USS 1/2" GALV 16 x WASHER LOCK 1/2" GALV 8 x U-BOLT 1/2" x 2-1/16" x SELECT GALV

PK1152-SS ~ 2-AXLE MOUNT KIT 2-EYE 2x3 AXLE STAINLESS / GALV

REPRESENTATION PHOTO MAGIC TILT TANDEM AXLE MOUNT KIT ~ PK1152-SS Provides all necessary hardware to mount double-eye springs on two 2" x 3" square axles FOR CORRECT U-BOLT, SELECT NUMBER OF SPRING LEAVES IN DROP-DOWN 3, 4, 5, 6 INCLUDES: 4 x PK1250 x 5-HOLE PLATES GALV 8 x PK1300 x 2-HOLE PLATES GALV 12 x PY0260 x CAPSCREW 1/2 x 3-1/2 GR5 PLATED 2 x PY0265 x CAPSCREW 1/2 x 4 GR5 PLATED 16 x PY1025 x LOCK WASHER 1/2 STAINLESS 14 x PY1315 x NUT NYLOCK 1/2-13 PLATED 28 x PY1515 x FLAT WASHER USS 1/2 GALV 16 x PY1785 x HEX NUT 1/2" STAINLESS 16 x PY1905 x FLAT WASHER 1/2" STAINLESS 8 x PY2538 x U-BOLT SS 1/2 x 2-1/16 x SELECT GALV

PK1153 ~ 3-AXLE MOUNT KIT 2-EYE 2x3 AXLE GALVANIZED

REPRESENTATION PHOTO MAGIC TILT TRIPLE AXLE MOUNT KIT ~ PK1153 Provides all necessary hardware to mount double-eye springs on three 2" x 3" axles. FOR CORRECT U-BOLT, SELECT NUMBER OF SPRING LEAVES IN DROP-DOWN 3, 4, 5, 6 INCLUDES: 6 x PK1250 x 5-HOLE PLATES GALV 16 x PK1300 x 2-HOLE SHACKLE PLATE GALV 20 x PY0260 x CAPSCREW 1/2" x 3-1/2" GR 5 PLATED 4 x PY0265 x CAPSCREW 1/2" x 4" GR 5 PLATED 24 x PY1315 x NUT NYLOCK 1/2-13 PLATED 24 x PY1410 x NUT HEX 1/2-13 GALV 48 x PY1515 x WASHER FLAT USS 1/2" GALV 24 x PY1610 x WASHER LOCK 1/2" GALV 12 x PY2050 x U-BOLT 1/2" x 2-1/16" x SELECT GALV

PK1300 ~ 2-HOLE SHACKLE PLATE GALVANIZED

REPRESENTATION PHOTO MAGIC TILT 2-HOLE SHACKLE PLATE ~ PK1300

PK1701 ~ SPRING HANGER 1-PIECE STANDARD GALVANIZED

REPRESENTATION PHOTO MAGIC TILT SPRING HANGER ~ PK1701 WORK ON FRONT OR REAR OF SPRINGS. WINGS ARE SPREAD TO ACCOMMODATE PIVOT SHACKLES AT REAR. IF NO PIVOT SHACKLES ARE USED (FRONT MOUNT, ONE-EYE SPRINGS) YOU CAN PULL THE WINGS DOWN TO 90° WITH THE SPRING EYE BOLT. SPRING-EYE BOLT PK1450 (NOT INCLUDED)

PK1702 ~ SPRING HANGER 2-PIECE HEAVY-DUTY GALVANIZED

REPRESENTATION PHOTO MAGIC TILT SPRING HANGER ~ PK1702

PK1702-T ~ SPRING HANGER 2-PIECE CA-SERIES 2-BOLT GALVANIZED

REPRESENTATION PHOTO MAGIC TILT SPRING HANGER ~ PK1702-T USE WITH PY1701 SQUARE MOUNT BOLTS

PK1703 ~ SPRING HANGER 2-PIECE MEDIUM-DUTY GALVANIZED

REPRESENTATION PHOTO MAGIC TILT SPRING HANGER ~ PK1703

PK1731 ~ SLIPPER SPRING HANGER GALVANIZED

REPRESENTATION PHOTO MAGIC TILT SLIPPER SPRING HANGER ~ PK1731 MOUNTS THROUGH 2"-WIDE TUBE FRAME FOR SINGLE-EYE SPRING REAR HANGER

PK1800 ~ EQUALIZER BOLT-ON PLATE 5-3/4 in GALVANIZED

REPRESENTATION PHOTO MAGIC TILT EQUALIZER PLATE ~ PK1800

PK1800-T ~ EQUALIZER BOLT-ON PLATE 5-3/4" CA-SERIES GALVANIZED

REPRESENTATION PHOTO MAGIC TILT EQUALIZER PLATE ~ PK1800-T USE WITH PY1701 SQUARE MOUNT BOLTS

PK1810 ~ EQUALIZER BOLT-ON PLATE 4-1/2 in GALVANIZED

REPRESENTATION PHOTO MAGIC TILT EQUALIZER PLATE ~ PK1810

PK1950 ~ EQUALIZER "6-1/2" GALVANIZED

REPRESENTATION PHOTO MAGIC TILT EQUALIZER ~ PK1950 INCLUDES NYLON BUSHINGS

PK2000 ~ EQUALIZER "8" INCH GALVANIZED

REPRESENTATION PHOTO MAGIC TILT EQUALIZER ~ PK2000 INCLUDES NYLON BUSHINGS

PK2550 ~ 2-AXLE UNDERCARRIAGE 63-1/2" NO STEPS

REPRESENTATION PHOTO MAGIC TILT UNDERCARRIAGE ~ PK2550 NO STEPS, FENDER BRACKETS, FRAME MOUNT HOLES USES TWO U-BOLTS TO GO AROUND TUBE OR C-CHANNEL FRAMES (NOT INCLUDED) BOTTOM CAN BE DRILLED TO BOLT DIRECTLY UNDER AN I-BEAM FRAME AXLE & SPRING-TO-UNDERCARRIAGE HARDWARE KITS: 2x2 AXLES: GALVANIZED PK1150 , STAINLESS/GALV PK1150-SS 2x3 AXLES: GALVANIZED PK1152 , STAINLESS/GALV PK1152-SS

Plastic Bunk Cover

4 sizes available

PM1000 ~ PWC WINCH 600 LBS.

Magic Tilt PWC Winch W/ Strap ~ PM1000 Does Not Include Mounting Hardware

PM1175 ~ WINCH SINGLE-SPEED 1400 LBS.

REPRESENTATION PHOTO MAGIC TILT WINCH W/ STRAP ~ PM1175 DOES NOT INCLUDE MOUNTING HARDWARE

PM1275 ~ WINCH SINGLE-SPEED 1800 LBS.

REPRESENTATION PHOTO MAGIC TILT WINCH W/ STRAP ~ PM1275 INCLUDES WINCH STRAP DOES NOT INCLUDE MOUNTING HARDWARE

PM1355 ~ WINCH TWO-SPEED 2000 LBS.

REPRESENTATION PHOTO MAGIC TILT WINCH W/ STRAP ~ PM1355 INCLUDES WINCH STRAP DOES NOT INCLUDE MOUNTING HARDWARE

PM1415 ~ WINCH TWO-SPEED 2500 LBS.

REPRESENTATION PHOTO MAGIC TILT WINCH W/ STRAP ~ PM1415 INCLUDES WINCH STRAP DOES NOT INCLUDE MOUNTING HARDWARE

PM1445 ~ WINCH TWO-SPEED 3200 LBS.

REPRESENTATION PHOTO MAGIC TILT WINCH W/ STRAP ~ PM1445 INCLUDES HD YELLOW WINCH STRAP DOES NOT INCLUDE MOUNTING HARDWARE

PM1455 ~ WINCH TWO-SPEED 3500 LBS.

REPRESENTATION PHOTO MAGIC TILT WINCH W/ STRAP & BRAKE ~ PM1455 INCLUDES HD WINCH STRAP AND BRAKE DOES NOT INCLUDE MOUNTING HARDWARE

PM1860 ~ WINCH HANDLE ONE-SPEED 7" DL 204457B

REPRESENTATION PHOTO MAGIC TILT WINCH HANDLES INCLUDES NYLOCK NUT REPLACEMENT HANDLE FOR PM1805 WINCH

PO1470 ~ WINCH POST 3" x 3" x 36" HEAVY-DUTY

REPRESENTATION PHOTO MAGIC TILT WINCH POST ~ PO1470 DOES NOT INCLUDE MOUNTING HARDWARE OR PO3541 END CAP

PO1475 ~ WINCH POST 3" x 3" x 20" STEEP HEAVY-DUTY

REPRESENTATION PHOTO MAGIC TILT WINCH POST ~ PO1475 DOES NOT INCLUDE MOUNTING HARDWARE OR PO3541 END CAP

PO1480 ~ WINCH POST 3" x 3" x 30" STEEP HEAVY-DUTY

REPRESENTATION PHOTO MAGIC TILT WINCH POST ~ PO1480 DOES NOT INCLUDE MOUNTING HARDWARE OR PO3541 END CAP

PO1485 ~ WINCH POST 3" x 3" x 30" STEEP STANDARD

REPRESENTATION PHOTO MAGIC TILT WINCH POST ~ PO1485 DOES NOT INCLUDE MOUNTING HARDWARE OR PO3541 END CAP

PO1490 ~ WINCH POST 3" x 3" x 36" STEEP HEAVY-DUTY

REPRESENTATION PHOTO MAGIC TILT WINCH POST ~ PO1490 DOES NOT INCLUDE MOUNTING HARDWARE OR PO3541 END CAP

PO1510 ~ WINCH POST ASSEMBLY 30" HEAVY-DUTY

REPRESENTATION PHOTO MAGIC TILT WINCH POST ASSEMBLY ~ PO1510 VERTICAL HEIGHT TO ROLLER CENTER: 20" TO 34" USES PO2160 WINCH POST, PO2170-1 WINCH SEAT, PO6294 ROLLER DOES NOT INCLUDE MOUNTING HARDWARE OR WINCH

PO1520 ~ WINCH POST ASSEMBLY 36" HEAVY-DUTY

REPRESENTATION PHOTO MAGIC TILT HEAVY-DUTY WINCH POST ASSEMBLY ~ PO1520 VERTICAL HEIGHT TO ROLLER CENTER: 20" TO 38" USES PO1470 WINCH POST, PO2170-1 WINCH SEAT, PO6294 ROLLER DOES NOT INCLUDE MOUNTING HARDWARE OR WINCH

PO1528 ~ WINCH POST ASSEMBLY 24" STANDARD-DUTY

REPRESENTATION PHOTO MAGIC TILT WINCH POST ASSEMBLY ~ PO1528 VERTICAL HEIGHT TO ROLLER CENTER: 17-1/2" TO 29" USES PO2166 WINCH POST, PO2170-1 WINCH SEAT, PO6294 BOW ROLLER DOES NOT INCLUDE MOUNTING HARDWARE OR WINCH

PO1535 ~ WINCH POST ASSEMBLY 30" STANDARD-DUTY

REPRESENTATION PHOTO MAGIC TILT WINCH POST ASSEMBLY ~ PO1535 VERTICAL HEIGHT TO ROLLER CENTER: 18" TO 33" USES PO2161 WINCH POST, PO2170-1 WINCH SEAT, PO6294 ROLLER DOES NOT INCLUDE MOUNTING HARDWARE OR WINCH

PO1537 ~ WINCH POST ASSEMBLY 30" (STEEP) STANDARD-DUTY

REPRESENTATION PHOTO MAGIC TILT STEEP ANGLE WINCH POST ASSEMBLY ~ PO1537 VERTICAL HEIGHT TO ROLLER CENTER: 20" TO 32" USES PO1485 WINCH POST, PO2170-1 WINCH SEAT, PO6294 ROLLER DOES NOT INCLUDE MOUNTING HARDWARE OR WINCH

PO1750-1 ~ WINCH POST ASSEMBLY 24" (SKIFF)

REPRESENTATION PHOTO MAGIC TILT WINCH POST ASSEMBLY ~ PO1750-1 PO2170-1 HD WINCH SEAT PO2166 WINCH POST DOES NOT INCLUDE MOUNTING HARDWARE OR WINCH

PO1910 ~ WINCH POST TOP CUSTOM 10 in (ADJUSTABLE)

REPRESENTATION PHOTO MAGIC TILT WINCH POST TOP ~ PO1910 3" x 3" BASE TUBE 11-1/2" LONG ROLLER BRACKET 11" x 4" WINCH PLATE W/ PRE-DRILLED HOLES REQUIRES 4" BOW ROLLER (NOT INCLUDED) REQUIRES A 2-1/2" WINCH POST BOTTOM (NOT INCLUDED)

PO1932 ~ BOW STOP (AIRBOAT) GALVANIZED

REPRESENTATION PHOTO MAGIC TILT BOW STOP (AIRBOAT)~ PO1932 WINCH POST MOUNTING HARDWARE NOT INCLUDED ASSEMBLY PROJECTS FROM WINCH POST AT 90-DEGREES

PO1932-1 ~ WINCH SEAT/ POST ASSEMBLY (AIRBOAT)

REPRESENTATION PHOTO MAGIC TILT WINCH SEAT/ POST ASSEMBLIES ~ PO1932-1 HIEGHT TO CENTER OF BOARDS: 13" TO 29" INCLUDES: PO1485 WINCH POST (STEEP) PO1932 WINCH SEAT / BOW STOP CARPETED BOARDS (2"x 4"x 12") SHIPS DISASSEMBLED DOES NOT INCLUDE UBOLTS FOR MOUNTING TO TONGUE OR WINCH

PO1945 ~ 2-1/2" x 2-1/2" TWO-PIECE BOW REST BOTTOM

REPRESENTATION PHOTO MAGIC TILT BOW REST BOTTOM ~ PO1945 FITS INSIDE TWO-PIECE ADJUSTABLE BOW STOPS AND TOPS WITH 3"x 3" TUBES TWO-PIECE SINGLE BOW REST ASSEMBLIES TWO-PIECE DOUBLE BOW REST ASSEMBLIES PO1957 TWO-PIECE BOW REST ASSEMBLY W/ WOOD ADJUSTABLE TWO-PIECE PINNACLE BOW REST ASSEMBLIES 45-DEGREE ADJUSTABLE TWO-PIECE PINNACLE BOW REST TOPS FIXED ADJUSTABLE TWO-PIECE PINNACLE BOW REST ASSEMBLIES WITH SWIVEL ADJUSTABLE TWO-PIECE PINNACLE BOW REST TOPS WITH SWIVEL TONGUE MOUNTING HARDWARE NOT INCLUDED

PO1957 ~ TWO-PIECE BOW REST ASSEMBLY W/ WOOD

REPRESENTATION PHOTO MAGIC TILT BOW REST ASSEMBLY ~ PO1957 DOES NOT INCLUDE TONGUE MOUNTING HARDWARE REPLACEMENT CARPETED WOOD BLOCK PT5022 USES PO1945 BOTTOM

PO1980 ~ BOW STOP "U" BRACKET

REPRESENTATION PHOTO MAGIC TILT "U" BRACKET ~ PO1980 DOES NOT INCLUDE MOUNTING HARDWARE , PM1000 WINCH , ROLLER

PO1995 ~ PRO-DRIVE WINCH POST / SEAT (ADJUSTABLE)

REPRESENTATION PHOTO MAGIC TILT PRO DRIVE WINCH POST / SEAT ~ PO1995 HEIGHT (TONGUE TO ROLLER CENTER): 14" TO 18" MOUNTING HARDWARE , 4" BOW STOP , WINCH NOT INCLUDED

PO1996 ~ PRO-DRIVE WINCH POST ASSEMBLY (ADJUSTABLE)

REPRESENTATION PHOTO MAGIC TILT PRO DRIVE WINCH POST ASSEMBLY ~ PO1996 * PLEASE SPECIFY TONGUE SIZE IN DROP-DOWN * HEIGHT (TONGUE TO ROLLER CENTER): 14" TO 18" USES PO1995 WINCH POST DOES NOT INCLUDE WINCH INCLUDES: MOUNTING HARDWARE FOR TONGUE - SPECIFY TONGUE HEIGHT SIZE IN DROP-DOWN BOW ROLLER BOW EYE SAFETY CHAIN

PO2010 ~ WINCH POST ASSEMBLY CUSTOM 24" (ADJUSTABLE)

REPRESENTATION PHOTO MAGIC TILT WINCH POST ASSEMBLY ~ PO2010 HEIGHT (BASE TO ROLLER CENTER): 17" TO 24" APPROX DOES NOT INCLUDE WINCH OR MOUNDING HARDWARE INCLUDES: BOW ROLLER SAFETY CHAIN

PO2020 ~ WINCH POST ASSEMBLY 48" SUPER HEAVY-DUTY

REPRESENTATION PHOTO MAGIC TILT WINCH POST ASSEMBLY ~ PO2020 TONGUE MOUNTING HARDWARE AND WINCH NOT INCLUDED USES PO2180 WINCH POST, PO2191 WINCH SEAT, PO1976 BOW REST

PO2042 ~ PWC WINCH ASSEMBLY

Magic Tilt PWC Winch Assembly ~ PO2042 Good to know: Includes PM1000 Winch with strap and mounting hardware to winch post Use With PO3520 Winch Post (sold separately)

PO2100 ~ WINCH POST ASSEMBLY PWC 20"

REPRESENTATION PHOTO MAGIC TILT PWC WINCH POST ASSEMBLY W/ WINCH ~ PO2100 INCLUDES PM1000 WINCH & STRAP, PO2096 WINCH POST DOES NOT INCLUDE MOUNTING HARDWARE FOR TONGUE USED ON SINGLE OR DOUBLE PWC AND SMALL BOAT TRAILERS

PO2149 ~ WINCH POST ASSEMBLY CUSTOM FLOYD ALUMINUM

REPRESENTATION PHOTO CUSTOM BUILT PART. PLEASE ALLOW ADDITIONAL TIME FOR DELIVERY. MAGIC TILT WINCH POST ASSEMBLY ~ PO2149 DOES NOT INCLUDE MOUNTING HARDWARE OR WINCH DESIGNED FOR THE FLOYD 10W SKIFF. WILL WORK ON MANY OTHER SKIFFS THAT HAVE A MILD VEE NOSE AND ARE EXPERIENCING HANGUP DURING LAUNCH AND RETRIEVAL.

PO2150 ~ WINCH POST ASSEMBLY 48" SUPER HEAVY-DUTY

MAGICT TILT WINCH POST ASSEMBLY ~ PO2150 USES PO2180 WINCH POST, PO2190 WINCH SEAT, PO6294 ROLLER DOES NOT INCLUDE TONGUE MOUNTING HARDWARE OR WINCH

PO2160 ~ WINCH POST 3" x 3" x 30" HEAVY-DUTY 6-HOLE

REPRESENTATION PHOTO MAGIC TILT WINCH POST ~ PO2160 DOES NOT INCLUDE MOUNTING HARDWARE OR PO3541 END CAP

PO2161 ~ WINCH POST 3" x 3" x 30" HEAVY-DUTY 4-HOLE

REPRESENTATION PHOTO MAGIC TILT WINCH POST ~ PO2161 DOES NOT INCLUDE MOUNTING HARDWARE OR PO3541 END CAP

PO2165 ~ WINCH POST 3" x 3" x 20" STANDARD

REPRESENTATION PHOTO MAGIC TILT WINCH POST ~ PO2165 DOES NOT INCLUDE MOUNTING HARDWARE OR PO3541 END CAP

PO2166 ~ WINCH POST 3" x 3" x 24" STANDARD

REPRESENTATION PHOTO MAGIC TILT WINCH POST ~ PO2166 DOES NOT INCLUDE MOUNTING HARDWARE OR PO3541 END CAP

PO2170-1 ~ WINCH SEAT STANDARD

REPRESENTATION PHOTO MAGIC TILT WINCH SEAT ~ PO2170-1 5" WINCH BASE W/ PRE-DRILLED HOLES MOUNTING HARDWARE SOLD SEPARATLEY USE WITH 4" BOW ROLLERS / STOPS

PO2171 ~ WINCH SEAT STANDARD (NO ARMS)

REPRESENTATION PHOTO MAGIC TILT WINCH SEAT ~ PO2171 DOES NOT INCLUDE MOUNTING HARDWARE

PO2179 ~ WINCH POST 3" x 4" x 48" STEEP SUPER HEAVY-DUTY

REPRESENTATION PHOTO MAGIC TILT WINCH POST ~ PO2179 DOES NOT INCLUDE MOUNTING HARDWARE OR PO3542 END CAP

PO2180 ~ WINCH POST 3" x 4" x 48" SUPER HEAVY-DUTY

REPRESENTATION PHOTO MAGIC TILT WINCH POST ~ PO2180 DOES NOT INCLUDE MOUNTING HARDWARE OR PO3542 END CAP

PO2190 ~ WINCH SEAT HEAVY-DUTY

REPRESENTATION PHOTO MAGIC TILT WINCH SEAT ~ PO2190 HAS 20" LONG ROLLER BRACKET & 12" x 5" WINCH BASE W/ PRE-DRILLED HOLES MOUNTS ON 3" WIDE POST MOUNTING HARDWARE SOLD SEPARATELY USE WITH 4" BOW ROLLERS / STOPS

PO2191 ~ WINCH SEAT HEAVY-DUTY (NO ARMS)

REPRESENTATION PHOTO MAGIC TILT WINCH SEAT ~ PO2191 MOUNTS ON 3" WIDE POST WITH TWO 1/2" DIAMETER U-BOLTS MOUNTING HARDWARE SOLD SEPARATELY

PO2240 ~ WINCH SEAT LIGHT-DUTY

REPRESENTATION PHOTO MAGIC TILT WINCH SEAT ~ PO2240 MOUNTING HARDWARE AND ROLLER NOT INCLUDED MOUNTS TO WINCH POST BY EITHER: WRAPING WITH 1/2" U-BOLTS AND PK1320 PLATES OR THROUGH-BOLTED WITH BOLTS USE WITH 3" BOW ROLLERS / STOPS

PO2262 ~ TWO-PIECE PINNACLE BOW REST ASSEMBLY WITH SWIVEL LOW PROFILE

REPRESENTATION PHOTO MAGIC TILT BOW REST ASSEMBLY ~ PO2262 HEAD PIVOTS TO BETTER MATCH BOW SLOPE AND REDUCE PRESSURE POINTS MOUNTING HARDWARE NOT INCLUDED

PO2400 ~ MAST HOLDER TOP CATAMARAN

REPRESENTATION PHOTO MAGIC TILT CATAMARAN MAST HOLDER ~ P02400 MOUNTING HARDWARE NOT INCLUDED

PO2610 ~ CROSSMEMBER GALVANIZED PONTOON 2" x 2" x 96"

REPRESENTATION PHOTO MAGIC TILT CROSS-MEMBER ~ PO2610 (PLEASE CALL 941-358-1117 FOR SHIPPING QUOTE) DOES NOT HAVE ANY PRE-DRILLED HOLES END PLUGS NOT INCLUDED

PO2612 ~ CROSSMEMBER GALVANIZED PONTOON 2" x 2" x 84"

REPRESENTATION PHOTO MAGIC TILT CROSS-MEMBER ~ PO2612 DOES NOT HAVE ANY PRE-DRILLED HOLES END PLUGS NOT INCLUDED

PO2859 ~ BOW STOP (PONTOON) ALUMINUM

REPRESENTATION PHOTO MAGIC TILT BOW STOP (PONTOON) ~ PO2859 ASSEMBLY PROJECTS FROM WINCH POST AT 90-DEGREES REQUIRES TWO 1/2" U-BOLTS TO MOUNT TO WINCH POST (NOT INCLUDED)

PO2900 ~ CAT WINCH POST / BOW STOP (BAY CAT) ALUMINUM

REPRESENTATION PHOTO MAGIC TILT CAT WINCH POST / BOW STOP ~ PO2900 ** SPECIAL ORDER - PLEASE ALLOW ADDITIONAL TIME ** SHIPS LTL ON PALLET - PLEASE CALL 941-358-1117 FOR SHIPPING QUOTE DESIGNED FOR TWIN VEE 19/22 BAYCAT. MAY BE SUITABLE FOR OTHER CAT APPLICATIONS CAN BE USED WITH PO2941 RISER TO INCREASE HEIGHT BY 8" OTHER ASSEMBLIES FOR SPECIFIC CAT BOATS AVAILABLE. PLEASE CALL 941-358-1117. USES PT5054 84" CARPETED BOARD (NOT INCLUDED) DOES NOT INCLUDE TONGUE MOUNTING HARDWARE , WINCH , CAP , SAFETY CHAIN

PO2927 ~ CAT BOW STOP 90" GALVANIZED

REPRESENTATION PHOTO MAGIC TILT CAT BOW STOP ~ PO2927 ** SPECIAL ORDER - PLEASE ALLOW ADDITIONAL TIME ** SHIPS LTL ON PALLET - PLEASE CALL 941-358-1117 FOR SHIPPING QUOTE MAY BE SUITABLE FOR VARIOUS CAT APPLICATIONS CAN BE USED WITH PO2941 RISER TO INCREASE HEIGHT BY 8" OTHER ASSEMBLIES FOR SPECIFIC CAT BOATS AVAILABLE. PLEASE CALL 941-358-1117. USES PT5055 96" CARPETED BOARD (NOT INCLUDED) DOES NOT INCLUDE TONGUE MOUNTING HARDWARE , SAFETY CHAIN

PO2941 ~ CAT BOW STOP RISER GALVANIZED

REPRESENTATION PHOTO MAGIC TILT CAT BOW STOP RISER ~ PO2941 USED TO INCREASE OVERALL HEIGHT OF CAT BOW STOP PO2927 BY 8" REQUIRES THREE 1/2" U-BOLTS TO MOUNT TO TONGUE AND SIX 1/2" BOLTS TO FASTEN TO BOW STOP (NOT INCLUDED) BOLT PATTERN MATCHES BASE PLATE OF CAT BOW STOP

PO2945 ~ WINCH POST 3" x 3" x 60" STRAIGHT W/ STEPS

REPRESENTATION PHOTO MAGIC TILT WINCH POST ~ PO2945 DOES NOT INCLUDE MOUNTING HARDWARE PO3542 END CAP WINCH SEAT WINCH OPTIONAL GRAB HANDLE FOR TOP PO2981

PO2951 ~ WINCH POST ASSEMBLY 30" (SKIFF) STANDARD-DUTY

REPRESENTATION PHOTO MAGIC TILT SKIFF WINCH POST ASSEMBLY ~ PO2951 SHIPS PARTIALLY DISASSEMBELED USES PO2160 WINCH POST AND PO2170-1 WINCH SEAT PIVOTTING CARPETTED BOARDS TO SPAN BOW AND SPLASH GUARD LIP DOES NOT INCLUDE MOUNTING HARDWARE OR WINCH

PO2981 ~ WINCH POST HANDLE

REPRESENTATION PHOTO MAGIC TILT WINCH POST HANDLE ~ P02981 FITS INSIDE 1-1/2" SQUARE TUBING WITH THE FOLLOWING HARDWARE (NOT INCLUDED) PS2210 NUT RETAINER PS2150 SET SCREW KIT

PO3295 ~ TURN BUCKLE 20-1/4"

REPRESENTATION PHOTO MAGIC TILT TURN BUCKLE ~ PO3295

PO3400 ~ WINCH POST 3" x 3" x 30" LIGHT-DUTY

REPRESENTATION PHOTO MAGIC TILT WINCH POST ~ PO3400 THIS IS A LIGHT-DUTY POST (11 GUAGE) FOR UP TO 1500 LB. WINCHES. DOES NOT INCLUDE MOUNTING HARDWARE OR PO3541 END CAP

PO3450 ~ WINCH POST ASSEMBLY 30" LIGHT-DUTY

REPRESENTATION PHOTO MAGIC TILT WINCH POST ASSEMBLY ~ PO3450 THIS IS A LIGHT DUTY ASSEMBLY FOR UP TO 1500-POUND WINCHES DOES NOT INCLUDE TONGUE MOUNTING HARDWARE OR WINCH INCLUDES: 1 x PO2240 WINCH SEAT, GALVANIZED 1 x PO3400 3"x 3" WINCH POST, GALVANIZED 1 x PO3541 WINCH POST CAP 1 x PQ3010 3" BOW ROLLER 2 x PK1320 SLOT PLATES, GALVANIZED 1 x PY0270 BOLT, 1/2"x4-1/2", PLATED 1 x PY1315 NUT, NYLOCK, 1/2", PLATED 4 x PY1410 NUT, 1/2", GALVANIZED 4 x PY1610 LOCK WASHER, 1/2", GALVANIZED 2 x PY2035 U-BOLT, 1/2"x 3-1/16"x 4-5/16", GALVANIZED

PO3520 ~ WINCH POST 1-1/2" x 1-1/2" x 24" PWC

REPRESENTATION PHOT MAGIC TILT PWC WINCH POST ~ PO3520 UTILIZES PO2042 PWC WINCH/BOW STOP CAN BE THROUGH-BOLTED ON I-BEAMS DOES NOT INCLUDE MOUNTING HARDWARE OR PO3538 END PLUG

PP2245 ~ RUB STRIP WITH HOLES 4" x 10" x 3/8"

REPRESENTATION PHOTO MAGIC TILT RUB STRIP ~ PP2245 INCLUDES 4 SELF TAPPING MOUNTING SCREWS REPLACEMENT CENTER PAD FOR PV2280-3 ASSEMBLY PRE-DRILLED HOLE PATTERN NOT GUARANTEED TO MATCH OLDER HOLE PATTERN SOAK STRIP IN HOT WATER PRIOR TO INSTALLATION

PP2258 ~ BUNK SLIDE 3/8" x 12" x 8'

REPRESENTATION PHOTO MAGIC TILT BUNK SLIDE ~ PP2258 (PLEASE CALL 941-358-1117 FOR SHIPPING QUOTE AND TO ORDER) PREMOLDED WITH VEE DOWN CENTER NO HOLES MOUNTING HARDWARE NOT INCLUDED

PP2260 ~ RUB STRIP 3 x 2

REPRESENTATION PHOTO MAGIC TILT RUB STRIP ~ PP2260 MOUNTING HARDWARE NOT INCLUDED MOUNTED WITH RIVETS FROM FACTORY CAN BE MOUNTED WITH TWO PY0491 SCREWS

PP2270 ~ RUB STRIP 1-3/4 x 15

REPRESENTATION PHOTO MAGIC TILT RUB STRIP ~ PP2270 CAN BE TRIMMED TO DESIRED LENGTH MOUNTING HARDWARE NOT INCLUDED MOUNTED WITH RIVETS FROM FACTORY CAN BE MOUNTED WITH THREE PY0491 SCREWS

PQ1255 ~ KEEL ROLLER 12 in (SELF CENTERING)

REPRESENTATION PHOTO MAGIC TILT KEEL ROLLER ~ PQ1255 DESIGNED TO MAKE CENTERING YOUR BOAT MUCH EASIER WITH EMBEDDED GROOVES THAT CENTER THE BOAT AS IT ROLLS FORWARD. MADE OF EXTREMELY CUT AND WEAR-RESISTANT POLYURETHANE WITH AN ADDED UV INHIBITOR AND WILL NOT DEVELOP FLAT SPOTS OR MARK YOUR BOAT. KEEL ROLLERS ARE NOT INTENDED AS WEIGHT-BEARING STRUCTURES BUT AS A GUIDE AND PROTECTIVE DEVICE. WHEN PROPERLY ADJUSTED, THE KEEL SHOULD JUST TOUCH OR JUST CLEAR THE ROLLER. USE WITH PR1550 ROLLER SHAFT, OR PR1560 SHAFT AND TWO PQ1360 END CAPS (NOT INCLUDED)

PQ1600 ~ ROLLER END CAP WHEEL 8-1/2" (STOLTZ)

REPRESENTATION PHOTO MAGIC TILT END CAP WHEEL ~ PQ1600 SOLD INDIVIDUALLY OFTEN USED ON SKIFFS OR ANY BOW WITH A LARGE PROTRUSION WHERE ADDITIONAL STANDOFF IS REQUIRED.

PQ1650 ~ BOW STOP ROLLER ASSEMBLY 8"

REPRESENTATION PHOTO MAGIC TILT ROLLER ASSEMBLY ~ PQ1650 * SELECT INNER ROLLER LENGTH (3" OR 4") IN DROP-DOWN. CORRECT BOLT LENGTH WILL BE INCLUDED. INCLUDES: 1 x BOW STOP ROLLER * 2 x PQ1600 WHEEL 8" 1 x CAPSCREW PLATED 1/2 x * GR5 1 x NYLOCK NUT 1/2-13 PLATED 2 x WASHER FLAT 1/2 GALVANIZED

PR1650 ~ ROLLER SHAFT CAP NUT 5/8"

REPRESENTATION PHOTO MAGIC TILT ROLLER SHAFT CAP NUT ~ PR1650 SOLD INDIVIDUALLY USED WITH VARIOUS KEEL ROLLER MOUNTS AND 5/8" ROLLER SHAFTS

PS1010 ~ KEEL ROLLER ASSEMBLY 5"

REPRESENTATION PHOTO MAGIC TILT ROLLER ASSEMBLY ~ PS1010 KEEL ROLLERS ARE NOT INTENDED AS WEIGHT-BEARING STRUCTURES BUT AS A GUIDE AND PROTECTIVE DEVICE. WHEN PROPERLY ADJUSTED, THE KEEL SHOULD JUST TOUCH OR JUST CLEAR THE ROLLER. MOUNTING HARDWARE NOT INCLUDED

PS1110 ~ TONGUE ROLLER BRACKET 5"

REPRESENTATION PHOTO MAGIC TILT TONGUE ROLL BRACKET ~ PS1110 SOLD INDIVIDUALLY

PS1178 ~ TONGUE ROLLER ASSEMBLY 5" (KARAVAN 310-00324)

REPRESENTATION PHOTO MAGIC TILT TONGUE ROLLER ASSEMBLY ~ PS1178 INCLUDES: MOUNTING HARDWARE USES 2 X PS1110 BRACKETS MAY SHIP WITH BLUE OR BLACK ROLLER KEEL ROLLERS ARE NOT INTENDED AS WEIGHT-BEARING STRUCTURES BUT AS A GUIDE AND PROTECTIVE DEVICE. WHEN PROPERLY ADJUSTED, THE KEEL SHOULD JUST TOUCH OR JUST CLEAR THE ROLLER.

PS1280 ~ KEEL ROLLER BRACKET ASSEMBLY 8"

REPRESENTATION PHOTO MAGIC TILT ROLLER ASSEMBLY ~ PS1280 MOUNTING HARDWARE NOT INCLUDED NOT ADJUSTABLE

PS1540 ~ ROLLER BRACKET 12" (PONTOON / CAT)

REPRESENTATION PHOTO MAGIC TILT ROLLER BRACKET ~ PS1540 CAN BE USED FOR SPLIT-HULL VESSELS (PONTOONS, HOBIE CATS, CATAMARANS) THAT DON'T REQUIRE FULL-LENGTH SUPPORT MOUNTING HARDWARE NOT INCLUDED USES 2-1/2" STRAIGHT ROLLERS (NOT INCLUDED) REPLACEMENT BRACKET FOR PS1550 ASSEMBLY

PS1550 ~ ROLLER BRACKET ASSEMBLY 12" (PONTOON / CAT)

REPRESENTATION PHOTO MAGIC TILT ROLLER BRACKET ASSEMBLY ~ PS1550 CAN BE USED FOR SPLIT-HULL VESSELS (PONTOONS, HOBIE CATS, CATAMARANS) THAT DON'T REQUIRE FULL-LENGTH SUPPORT MOUNTING HARDWARE NOT INCLUDED USES PS1540 BRACKET USES 2-1/2" STRAIGHT ROLLERS

PS1925 ~ GALVANIZED TRAILER UNIVERSAL GUIDE POLE MOUNT PLATE

REPRESENTATION PHOTO MAGIC TILT MOUNT PLATE ~ PS1925 USED IN HARDWARE KIT PS1930 AND PV2155 GUIDE POLE ASSEMBLY. FOR MOUNTING GUIDE POLES TO GALVANIZED TRAILERS USING U-BOLTS.

PS2150 ~ SET SCREW WITH NUT 7/16" x 1-1/2"

REPRESENTATION PHOTO MAGIC TILT SET SCREW ~ PS2150 REPLACEMENT SET SCREW FOR PS2640 ASSEMBLY USED WITH THE PS2649 , PS2310 & PS2401 CLAMP-ON SOCKETS AND PS2210 NUT RETAINER (NOT INCLUDED)

PS2210 ~ NUT RETAINER PLATE

REPRESENTATION PHOTO MAGIC TILT NUT RETAINER PLATE ~ PS2210 REPLACEMENT RETAINER FOR PS2640 ASSEMBLY USED WITH THE PS2649 AND PS2310 & PS2401 CLAMP-ON SOCKETS AND PS2150 SET SCREW (NOT INCLUDED)

PS2640 ~ CLAMP-ON ASSEMBLY 3" x 1-1/2" TUBE

REPRESENTATION PHOTO MAGIC TILT CLAMP-ON ASSEMBLY ~ PS2640 DESIGNED TO MOUNT HORIZONTAL BUNKS TO 3" x 3" CROSSMEMBERS INCLUDES: 1 x PS2150 SET SCREW W/ NUT PLATED 1 x PS2210 NUT RETAINER PLATE GALV 1 x PS2649 3" x 3" CLAMP-ON SOCKET GALV 1 x PT1760 BUNK RISER 1-1/2" x 1-1/2" x 12" SQUARE GALV 1 x PT2070 PIVOT L BRACKET GALV 2 x PY0409 LAG SCREW 3/8" x 1-1/4" PLATED 3 x PY1405 HEX NUT 3/8-16 GALV 3 x PY1505 FLAT WASHER 3/8" GALV 3 x PY1605 LOCK WASHER 3/8" GALV 1 x PY1615 BOLT 3/8" x 2-1/2" GALV 2 x PY1624 BOLT 3/8" x 4-1/2" GALV

PS2649 ~ CLAMP-ON SOCKET 3" x 1-1/2" TUBE

REPRESENTATION PHOTO MAGIC TILT CLAMP-ON SOCKET ~ PS2649 DESIGNED TO MOUNT HORIZONTAL BUNKS TO 3" x 3" CROSSMEMBERS REPLACEMENT SOCKET FOR THE PS2640 ASSEMBLY MOUNTS OVER CROSSMEMBER WITH 3/8" x 4-1/2" GALVANIZED BOLT (NOT INCLUDED) REQUIRES ONE EACH PS2210 NUT RETAINER AND PS2150 SET SCREW (NOT INCLUDED) USE WITH PRE-CUT 1-1/2" TUBE BRACKETS OR BULK TUBE BRACKETS (NOT INCLUDED)

PS2652 ~ CLAMP-ON SOCKET 3" x 2" TUBE

REPRESENTATION PHOTO MAGIC TILT CLAMP-ON SOCKET ~ PS2652 USED TO MOUNT ANY BOW REST OR BUNK GUIDE USING 2" x 2" VERTICAL TUBING REQUIRES TWO PS2150 SET SCREWS (NOT INCLUDED) MOUNTS TO 3" x 3" CROSSMEMBERS WITH TWO 3/8" x 4-1/2" GALVANIZED BOLTS (NOT INCLUDED) USE WITH PU4040 2" TUBE (NOT INCLUDED)

PS2653-1 ~ CLAMP-ON TOP HAT 1-1/2" GALVANIZED

REPRESENTATION PHOTO MAGIC TILT CLAMP-ON SOCKET ~ PS2653-1

PS2655 ~ CA CHANNEL MOUNT GUIDE POLE MOUNT PLATE ALUMINUM

REPRESENTATION PHOTO MAGIC TILT MOUNT PLATE ~ PS2655 USED IN HARDWARE KIT PS2658 . FOR MOUNTING GUIDE POLES TO CA SERIES ALUMINUM TRAILERS EQUIPED WITH UNDER-FRAME CHANNEL.

PS2658 ~ CA CHANNEL MOUNT GUIDE POLE MOUNT KIT

REPRESENTATION PHOTO MAGIC TILT GUIDE POLE MOUNT ASSEMBLY ~ PS2658 CHANNEL. INCLUDES: 2 x PS2653-1 CLAMP-ON FOR 1-1/2" GUIDE POLES GALV 2 x PS2655 GUIDE PLATE FOR CA SERIES TRAILERS WITH UNDER-FRAME CHANNEL ALUM 4 x PY1701 1/2" x 1-1/2" SQUARE-HEAD BOLT STAINLESS 4 x PY1820 1/2" NYLOCK NUT STAINLESS 4 x PY1905 1/2" FLAT WASHER STAINLESS 8 x PY1710 3/8" x 1-1/4" BOLT STAINLESS 8 x PY1810 3/8" NYLOCK NUT STAINLESS 16 x PY1902 3/8" FLAT WASHER STAINLESS

PS5100 ~ BOW REST ASSEMBLY 6'

REPRESENTATION PHOTO MAGIC TILT BOW REST KIT ~ PS5100 SPANS TWO 3" x 3" CROSSMEMBERS AT FRONT OF TRAILER INCLUDES: 2 x PV2281 ONE-PIECE BOW REST Y-SUPPORT GALV 2 x CARPETED HORIZONTAL BUNK 2" x 6" x 6' 2 x PS2653 2" TOP HAT BRACKET GALV 4 x PY2035 1/2" x 3-1/16" x 4-5/16" U-BOLT GALV 8 x PY1410 1/2" HEX NUT GALV 8 x PY1610 1/2" LOCK WASHER GALV

PT5022 ~ TWO-PIECE BOW REST W/ WOOD REPLACEMENT BLOCK

REPRESENTATION PHOTO MAGIC TILT BOW REST WOOD REPLACEMENT BLOCK ~ PT5022 INCLUDES TWO THROUGH-BOLTS FOR MOUNTING BEVELED INSIDE EDGE REPLACEMENT BLOCK FOR PO1957 ASSEMBLY SOLD INDIVIDUALLY REQUIRES TWO EACH (NOT INCLUDED) PY1505 FLAT WASHER PY1415 TOP-LOCK NUT

PV2151 ~ GUIDE POLE COVERS 46-1/4 in (PAIR)

REPRESENTATION PHOTO MAGIC TILT GUIDE POLE COVERS ~ PV2151

PV2155 ~ TUBE GUIDE ASSY STANDARD UNIVERSAL GALVANIZED TRAILERS

REPRESENTATION PHOTO MAGIC TILT STANDARD GUIDE ASSEMBLY ~ PV2155 PLEASE CALL 941-358-1117 FOR SHIPPING QUOTE INDICATE FRAME HEIGHT WHEN CALLING 3", 4", 5" UNIVERSAL KIT FOR TRAILERS WITH 2" WIDE GALVANIZED FRAMES USES PV1930 MOUNTING KIT AND PV2159-66G GUIDE POLE OPTIONAL GUIDE POLE COVERS (62x30x5)

PV2158-1 ~ TUBE GUIDE ASSY STANDARD W/ CLAMP-ON BRACKETS

REPRESENTATION PHOTO MAGIC TILT STANDARD TUBE GUIDE ASSEMBLY ~ PV2158-1 PLEASE CALL 941-358-1117 FOR SHIPPING QUOTE INCLUDES: 2 x PV2159-66G STANDARD GUIDE POLE 2 x PV2157 60" PVC SLEEVE WITH CAP 8 x BOLT 3/8" x 1-1/4" GALV 8 x NUT HEX 3/8" GALV 16 x WASHER FLAT 3/8" GALV 8 x WASHER LOCK 3/8" GALV 2 x PS2653-1 1-1/2Z' CLAMP-ON BRACKETS GALV OPTIONAL GUIDE POLE COVERS (62x30x5)

PV2158-2 ~ TUBE GUIDE ASSY STANDARD CA CHANNEL MOUNT

REPRESENTATION PHOTO MAGIC TILT STANDARD TUBE GUIDE ASSEMBLY ~ PV2158-2 PLEASE CALL 941-358-1117 FOR SHIPPING QUOTE INCLUDES: PS2658 HARDWARE KIT PV2159-66G GUIDE POLE PV2157 60" PVC SLEEVE WITH CAP OPTIONAL GUIDE POLE COVERS (62x30x5)

PV2159-66G ~ TUBE GUIDE POLE STANDARD

REPRESENTATION PHOTO MAGIC TILT STANDARD TUBE GUIDE ~ PV2159-66G (PLEASE CALL 941-358-1117 FOR SHIPPING QUOTE) OPTIONAL GUIDE POLE COVERS

PV2164 ~ TUBE GUIDE POLE HEAVY DUTY

REPRESENTATION PHOTO MAGIC TILT TUBE GUIDE ~ PV2164 PLEASE CALL 941-358-1117 FOR SHIPPING QUOTE. LONGER, TALLER AND HEAVIER THAN STANDARD TUBE GUIDE FOR LARGER BOATS. OPTIONAL GUIDE POLE COVERS

PV2165 ~ TUBE GUIDE ASSY HEAVY DUTY W/ U-BOLTS

REPRESENTATION PHOTO MAGIC TILT TUBE GUIDE ASSEMBLY ~ PV2165 (PLEASE CALL 941-358-1117 FOR SHIPPING QUOTE) INCLUDES: 2 x PV2164 SUPER HD GUIDE POLE 2 x PV2166 72" PVC SLEEVE WITH CAP 8 x NUT HEX 3/8-16 GALV 8 x WASHER FLAT 3/8" GALV 8 x WASHER LOCK 3/8" GALV 4 x U-BOLT 3/8" x 1-9/16" x 2-5/8" GALV OPTIONAL GUIDE POLE COVERS (74x39x5)

PV2220 ~ PONTOON GUIDE ASSEMBLY

REPRESENTATION PHOTO MAGIC TILT GUIDE ASSEMBLY ~ PV2220 SOLD INDIVIDUALLY REQUIRES 3/8" x 3" GALVANIZED BOLT WITH FASTENERS (NOT INCLUDED)

PV2280-3 ~ BOW REST GUIDE PAD ASSEMBLY 40"

REPRESENTATION PHOTO MAGIC TILT GUIDE PAD ASSEMBLY ~ PV2280-3 HEIGHT ABOVE CROSSMEMBER: INCLUDES PP2245 CENTER RUB STRIP MOUNTING HARDWARE (NOT INCLUDED): EITHER PS2652 CLAMP-OVER OR TOP HAT CLAMPS OR ASSEMBLIES

Roll Brackets

2 sizes available

Rub Pads

2 sizes available

Side Guide Assemblies

5 sizes available

Single Eye Spring

8 sizes available

SPINDLE NUT

AXLE NUT 3/4" ID

Spring Tabs

3 sizes available

Two Speed Winches

Heavy-duty winch is designed for horizontal pulling High carbon steel gears Permanently lubricated bearings Ergonomic handle grip Zinc TUFFPLATE finish Handle included Made in the USA

WINCH HANDLES

WINCH HANDLE 9-1/2"

Winch Post

4 sizes available

Winch Post Assemblies

2 sizes available

Winch Post Caps

4 sizes available

Winch Straps

5 sizes available

ZZ-621-9030 ~ GUIDE POLE MOUNT ASSEMBLY UNIVERSAL

REPRESENTATION PHOTO UNIVERSAL GUIDE POLE MOUNT ASSEMBLY ~ ZZ-621-9030 GALVANIZED TOP HAT INCLUDES: 4 X PLATED UBOLTS W/ FLANGE NUTS 2 X GALVANIZED TOP HATS SHIPS FROM STORE

ZZ-621-9040 ~ I-BEAM GUIDE POLE MOUNT BRACKETS

REPRESENTATION PHOTO I-BEAM GUIDE POLE MOUNT BRACKETS ~ ZZ-621-9040 SOLD IN PAIRS FOR ONE GUIDE POLE NO DRILLING REQUIRED MOUNTS ON TOP OR BOTTOM OF I-BEAM FRAME USE WITH ANY 1-1/2" SQUARE GUIDE POLE USE WITH PV2159-66G OR PV2164 GUIDE POLES REQUIRES ONE 3/8" x ? STAINLESS BOLT AND NYLOCK NUT (NOT INCLUDED) LENGTH SUBJECT TO FRAME WIDTH MAY SHIP DIRECTLY FROM STORE

ZZ-PK1560 ~ SUSPENSION BUSHING

RPERESENTATION PHOTO MAGIC TILT SUSPENSION BUSHING ~ ZZ-PK1560 MAY SHIP SEPARATELY FROM STORE