Hubs & Bearings

5 Lug Hubs

2 sizes available

5Lug Hub Assemblies

HUB ASSY 1-3/8X1-1/16 5L

6Lug Hub Assemblies

2 sizes available

6Lug Hub Assemblies (Copy)

3 sizes available

8Lug Hub Assemblies

2 sizes available

Bearing Kits & Conversion Kits

HD 1-3/4"X1-1/4" UFP

Kit Includes: Part Description Qty PE1550 BEARING HD 1-1/4" [15123] 1 PE1600 BEARING 1-3/4" [25580] 1 PE1850 RACE-HD 1-1/4" [15245] 1 PE1900 RACE 1-3/4" [25520] 1 PE2101 SEAL 1-3/4"[UFP][21333] 1 PH2012 COTTER PIN 1/8"X1-1/4"[UFP AXLE] 1

Bearing Protector Bras

2 sizes available

Bearing Protectors

4 sizes available

Desc

Lug Nuts

CHROME LUG NUT (MCGARD)

PD1300 ~ 4-LUG HUB ASSEMBLY 1-1/16"

REPRESENTATION PHOTO MAGIC TILT HUB KIT ASSEMBLY ~ PD1300 INCLUDES: 1 x HUB W/ RACE-DACRO 1-1/16" 4-LUG 4 x LUG NUT 13/16" 2 x BEARING 1-1/16" (44649) 1 x SEAL 1-1/16" (198-125) 1 x DUST CAP (1.980) 1 x COTTER PIN 1/8" x 1-3/4" PLATED DO YOU NEED BEARING PROTECTORS AND BRAS? (NOT INCLUDED) PF1054 BEARING PROTECTOR PF1060 BRA

PD1360 ~ 4-LUG HUB WITH RACE 1-1/16" COATED

REPRESENTATION PHOTO MAGIC TILT HUB WITH RACE ~ PD1360 INCLUDES RACES ALREADY INSTALLED NOT INCLUDED BEARING KIT PE1100 BEARING PROTECTOR PF1054 AND BRA PF1060

PD1600 ~ 5-LUG HUB ASSEMBLY 1-1/16" BEARINGS 1.38" ID SEAL GREASED (UFP)

REPRESENTATION PHOTO MAGIC TILT KUB KIT ASSEMBLY ~ PD1600 INCLUDES: 1 x HUB ZINC W/ RACES 5-LUG 5 x LUG NUT 13/16" 2 x BEARING 1-1/16" (44649) 1 x SEAL 1-1/16" UFP (198-138) 1 x DUST CAP 1" (1.980) 1 x COTTER PIN 1/8" x 1-3/4" PLATED DO YOU NEED? (NOT INCLUDED) PF1054 BEARING PROTECTOR PF1060 BRA

PD1602-L ~ 5-LUG HUB ASSEMBLY 1-1/16" BEARINGS 1.25" ID SEAL GREASED (UFP & NON-UFP)

REPRESENTATION PHOTO MAGIC TILT PRE-GREASED HUB ASSEMBLY ~ PD1602-L APPLICATION: ALL 1-1/2" x 1-1/2" AXLES USING 1-1/16" BEARINGS AND 1.25" ID SEAL (UFP AND NON-UFP) ALL 2" x 2" 1,500 TO 2,500-POUND UFP AXLES FROM 2022 ON COMES PRE-GREASED AND ASSEMBLED - READY TO USE IF YOU HAVE A 2" x 2" UFP AXLE THAT USES 1-1/16" BEARINGS A 1.38" ID SEAL, USE PD1600 HUB KIT. INCLUDES: 1 x PD1670 GALV HUB 5 x PD2250 LUG NUT 1/2" 2 x PE1400 BEARING 1-1/16" (44649) (INSTALLED) 2 x PE1710 RACE (44610) (INSTALLED) 1 x PE2010 SEAL 1.98" OD x 1.25" ID (INSTALLED) 1 x PE2301 POSI-LUBE DUST CAP 1.98" 1 x PE2311 POSI-LUBE RUBBER PLUG 1 x PH2014 COTTER PIN 1/8" x 1-3/4" PLATED DO YOU NEED? (NOT INCLUDED) PF1054 BEARING PROTECTOR PF1060 BRA

PD1602-L-100 ~ 5-LUG HUB ASSEMBLY 1-1/16" BEARINGS 1.25" ID SEAL GREASED (UFP & NON-UFP)

PALLET OF 100

PD1602-L Quantity of 100 Palletized

PD1670 ~ 5-LUG HUB WITH RACE 1-1/16" GALVANIZED

REPRESENTATION PHOTO MAGIC TILT HUB W/ RACE ~ PD1670 INCLUDES RACES ALREADY INSTALLED NOT INCLUDED BEARING PROTECTOR PF1054 AND BRA PF1060

PD1700-L ~ 5-LUG HUB ASSEMBLY 1-1/16"x1-3/8" GREASED (UFP)

Magic Tilt Pre-Greased Hub Assembly ~ PD1700-L Any Axle Using 1-1/16" x 1-3/8" Bearings and a seal with 1.68" ID Included in this kit: 1 x PD1760 Galv Hub 5 x PD2250 Lug Nut 1/2" 1 x PE1400 Bearing 1-1/16" (44649) (Installed) 1 x PE1450 Bearing 1-3/8" (68149) (Installed) 1 x PE1710 Race (44610) (Installed) 1 x PE1750 Race (68111) (Installed) 1 x PE2055 Seal 2.561" OD x 1.687" ID (Installed) 1 x PE2301 Posi-Lube Dust Cap 1.98" 1 x PE2311 Posi-Lube Rubber Plug 1 x PH2012 Cotter Pin 1/8" x 1-1/4" Plated Good to know: Comes pre-greased and assembled - ready to use Need? (sold separately) PF1054 Bearing Protector PF1060 Bra

PD1702-L ~ 5-LUG HUB ASSEMBLY 1-1/16"x1-3/8" GREASED (NON UFP)

REPRESENTATION PHOTO MAGIC TILT PRE-GREASED HUB ASSEMBLY ~ PD1702-L INCLUDES: 1 x PD1760 GALV HUB 5 x PD2250 LUG NUT 1/2" 1 x PE1400 BEARING 1-1/16" (44649) (INSTALLED) 1 x PE1450 BEARING 1-3/8" (68149) (INSTALLED) 1 x PE1710 RACE (44610) (INSTALLED) 1 x PE1750 RACE (68111) (INSTALLED) 1 x PE2050 SEAL 2.565" OD x 1.719" ID (INSTALLED) 1 x PE2301 POSI-LUBE DUST CAP 1.98" 1 x PE2311 POSI-LUBE RUBBER PLUG 1 x PH2014 COTTER PIN 1/8" x 1-3/4" PLATED COMES PRE-GREASED AND ASSEMBLED - READY TO USE DO YOU NEED? (NOT INCLUDED) PF1054 BEARING PROTECTOR PF1060 BRA

PD1702-L-100 ~ 5-LUG HUB ASSEMBLY 1-1/16"x1-3/8" GREASED (NON UFP)

PALLET OF 100

PD1760 ~ 5-LUG HUB WITH RACE 1-1/16" x 1-3/8" GALVANIZED

REPRESENTATION PHOTO MAGIC TILT HUB W/ RACE ~ PD1760 INCLUDES RACES ALREADY INSTALLED NOT INCLUDED BEARING KIT PE1152 (UFP), PE1150 (NON-UFP) BEARING PROTECTOR PF1054 AND BRA PF1060

PD1857 ~ 6-LUG HUB WITH RACE 1-1/4" x 1-3/4" GALVANIZED

REPRESENTATION PHOTO MAGIC TILT HUB WITH RACE ~ PD1857 INCLUDES RACES ALREADY INSTALLED NOT INCLUDED USE BEARING KITS PE1201 (UFP AXLES) OR PE1250 (NON-UFP AXLES) BEARING PROTECTOR PF1101 AND BRA PF1063

PD1860 ~ 8-LUG HUB WITH RACES 1-1/4" x 1-3/4" GALVANIZED

REPRESENTATION PHOTO MAGIC TILT HUB WITH RACE ~ PA1860 INCLUDES RACES ALREADY INSTALLED NOT INCLUDED USE BEARING KITS PE1256 (UFP), PE1255 (NON-UFP) BEARING PROTECTOR PF1103 AND BRA PF1063

PD1861-L ~ 8-LUG HUB ASSEMBLY 1-1/4"x1-3/4" GREASED (NON-UFP)

REPRESENTATION PHOTO MAGIC TILT PRE-GREASED HUB ASSEMBLY ~ PD1861-L ALL 6K TO 7K AXLES THAT USE A 2.23" ID SEAL AND A 1" CASTLE NUT INCLUDES: 1 x PD1860 GALV HUB W/ LONG STUDS 8 x PD2250 LUG NUT 1/2" 1 x PE1555 BEARING 1-1/4" (14125A) (INSTALLED) 1 x PE1600 BEARING 1-3/4" (25580) (INSTALLED) 1 x PE1855 RACE OUTER (14276) (INSTALLED) 1 x PE1900 RACE INNER (25520) (INSTALLED) 1 x PE2100 SEAL 3.38" OD x 2.23" ID (22333) (INSTALLED) 1 x PE2308 POSI-LUBE DUST CAP 2.717" 1 x PE2311 POSI-LUBE RUBBER PLUG 1 x PH1340 COTTER PIN 1/8" x 1-3/4" PLATED COMES PRE-GREASED AND ASSEMBLED - READY TO USE

PD2250 ~ LUG NUT 1/2"

REPRESENTATION PHOTO MAGIC TILT LUG NUT ~ PD2250 SOLD INDIVIDUALLY

PD2255 ~ LUG NUT ACORN 1/2" STAINLESS STEEL

REPRESENTATION PHOTO MAGIC TILT ACORN LUG NUT~ PD2255 SOLD INDIVIDUALLY

PD2450-L ~ 6-LUG HUB ASSEMBLY 1-1/4"x1-3/4" GREASED (NON UFP)

REPRESENTATION PHOTO MAGIC TILT PRE-GREASED HUB ASSEMBLY ~ PD2450-L INCLUDES: 1 x PD1857 GALV HUB W/ LONG STUDS 6 x PD2250 LUG NUT 1/2" 1 x PE1550 BEARING 1-1/4" (15123) (INSTALLED) 1 x PE1600 BEARING 1-3/4" (25580) (INSTALLED) 1 x PE1850 RACE OUTER (15245) (INSTALLED) 1 x PE1900 RACE INNER (25520) (INSTALLED) 1 x PE2100 SEAL 3.38" OD x 2.25" ID (22333) (INSTALLED) 1 x PE2303 POSI-LUBE DUST CAP 2.441" 1 x PE2311 POSI-LUBE RUBBER PLUG 1 x PH2014 COTTER PIN 1/8" x 1-3/4" PLATED COMES PRE-GREASED AND ASSEMBLED - READY TO USE DO YOU NEED? (NOT INCLUDED) PF1101 BEARING PROTECTOR PF1063 BRA

PD2550-L ~ 6-LUG HUB ASSEMBLY 1-1/4"x1-3/4" GREASED (UFP)

REPRESENTATION PHOTO MAGIC TILT PRE-GREASED HUB ASSEMBLY ~ PD2550-L ANY AXLE USING 1-1/4" x 1-3/4" BEARINGS, A SEAL WITH 2.125" ID, PH2130 HARDWARE INCLUDES: 1 x PD1857 GALV HUB W/ 2" LONG STUDS 6 x PD2250 LUG NUT 1/2" 1 x PE1550 BEARING 1-1/4" (151123) (INSTALLED) 1 x PE1600 BEARING 1-3/4" (25580) (INSTALLED) 1 x PE1850 RACE OUTER (15245) (INSTALLED) 1 x PE1900 RACE INNER (25520) (INSTALLED) 1 x PE2101 SEAL 3.38" OD x 2.125" ID (21333) (INSTALLED) 1 x PE2303 POSI-LUBE DUST CAP 2.441" 1 x PE2311 POSI-LUBE RUBBER PLUG 1 x PH2012 COTTER PIN 1/8" x 1-1/4" PLATED COMES PRE-GREASED AND ASSEMBLED - READY TO USE

PD2750 ~ 5-LUG MAINTENANCE-FREE HUB ASSEMBLY KNOTT (KARAVAN 200-00036-SP2)

REPRESENTATION PHOTO MAGIC TILT KNOTT HUB ASSEMBLY ~ PD2750 INCLUDES: 1 X GALVANIZED HUB WITH SEALED BEARINGS 5 X LUG NUTS PLATED 1 X CRUSH SPINDLE NUT 1 X DUST CAP 1 X DUST CAP O-RING PLEASE NOTE NEVER REUSE THE OLD AXLE NUT TIGHTEN THE NEW AXLE NUT TO 207 FT-LBS (280 NM)

PE1100 ~ BEARING KIT 1-1/16" x 1-1/16" (NON-UFP)

REPRESENTATION PHOTO MAGIC TILT BEARING KIT ~ PE1100 USE WITH HUBS PD1360 , PD1670 , PD1660 INCLUDES: 2 x PE1400 BEARING 1-1/16" (44649) 2 x PE1710 RACE 1" OR 1-1/16" (44610) 1 x PE2010 SEAL 1-1/16" (198-125) 1 x PH2014 COTTER PIN 1/8" x 1-3/4" PLATED

PE1101 ~ BEARING KIT 1-1/16 x 1-1/16" (UFP)

REPRESENTATION PHOTO MAGIC TILT BEARING KIT ~ PE1101 USE WITH HUBS PD1670 , PD1660 INCLUDES: 2 x PE1400 BEARING 1-1/16" (44649) 2 x PE1710 RACE 1" OR 1-1/16" (44610) 1 x PE2015 SEAL 1-1/16" UFP (198-138) 1 x PH2012 COTTER PIN 1/8" x 1-1/4" UFP PLATED

PE1150 ~ BEARING KIT 1-1/16" x 1-3/8" (NON-UFP)

REPRESENTATION PHOTO MAGIC TILT BEARING KIT ~ PE1150 USE WITH HUBS PD1750 , PD1760 INCLUDES: 1 x PE1400 BEARING 1-1/16" (44649) 1 x PE1450 BEARING 1-3/8" (68149) 1 x PE1710 RACE 1" OR 1-1/16" (44610) 1 x PE1750 RACE 1-3/8" UCF (68111) 1 x PE2050 SEAL 1-3/8" (255-171) 1 x PH2014 COTTER PIN 1/8" x 1-3/4" PLATED

PE1151 ~ BEARING KIT 1-1/16" x 1-3/8" (UFP)

Magic Tilt Bearing Kit ~ PE1151 Good to know: Use with rotor/hub combinations PG2026-1 , PG2026-2, PG2024 Inner Race (PE1749) Used Exclusively In 5-Lug UFP 1-Piece Disk Brake Rotors Kit Contains: 1 x PE1400 Bearing 1-1/16" (44649) 1 x PE1450 Bearing 1-3/8" (68149) 1 x PE1710 Race 1" Or 1-1/16" (44610) 1 x PE1749 Race 1-3/8" UFP (68110) 1 x PE2055 Seal 1-3/8" UFP (257-168) 1 x PH2012 Cotter Pin 1/8" x 1-1/4" UFP

PE1152 ~ BEARING KIT 1-1/16" x 1-3/8" (UFP)

REPRESENTATION PHOTO MAGIC TILT BEARING KIT ~ PE1152 USE WITH HUBS PD1750 , PD1760 INCLUDES: 1 x PE1400 BEARING 1-1/16" (44649) 1 x PE1450 BEARING 1-3/8" (68149) 1 x PE1710 RACE 1" OR 1-1/16" (44610) 1 x PE1750 RACE 1-3/8" UCF (68111) 1 x PE2055 SEAL 1-3/8" UFP (257-168) 1 x PH2012 COTTER PIN 1/8" x 1-1/4" UFP

PE1200 ~ BEARING KIT 1-1/4" x 1-3/4" SELECT 6-LUG UFP HUBS/ROTORS

REPRESENTATION PHOTO MAGIC TILT BEARING KIT ~ PE1200 APPLICATION: - USE ROTORS PG2027-1 & PG2027-2 PRIOR TO 3/24 WITH 2.328" DUST CAPS - 5,200-POUND UFP AXLES (2"x3" SPRING AND 3-1/2" TORSION) USING SEAL WITH 2.13" INSIDE DIAMETER INCLUDES: 1 x PE1500 1-1/4" BEARING (67048) 1 x PE1600 1-3/4" BEARING (25580) 1 x PE1800 RACE (67010) 1 x PE1900 RACE (25520) 1 x PE2101 SEAL (21333) 1 x PH2012 1/8" x 1-1/4" COTTER PIN

PE1201 ~ BEARING KIT 1-1/4" x 1-3/4" SELECT 6-LUG UFP HUBS/ROTORS

REPRESENTATION PHOTO MAGIC TILT BEARING KIT ~ PE1201 APPLICATION: - USE WITH HUB PD1857 , ROTORS PG2027-1 & PG2027-2 (AFTER 3/24 WITH 2.44" DUST CAPS) ON UFP AXLES - 5,200-POUND UFP AXLES (2"x3" SPRING AND 3-1/2" TORSION) USING 2.13" INSIDE DIAMETER SEALS - SELECT 6-LUG NON-UFP HUBS (D-MAX, KODIAK, DRUM) ON UFP AXLES USING 2.13" INSIDE DIAMETER SEALS INCLUDES: 1 x PE1550 1-1/4" BEARING (15123) 1 x PE1600 1-3/4" BEARING (25580) 1 x PE1850 RACE (15245) 1 x PE1900 RACE (25520) 1 x PE2101 SEAL (21333) 1 x PH2012 1/8" x 1-1/4" COTTER PIN

PE1250 ~ BEARING KIT 1-1/4" x 1-3/4" SELECT 6-LUG NON-UFP HUBS/ROTORS

REPRESENTATION PHOTO MAGIC TILT BEARING KIT ~ PE1250 APPLICATION: - USE WITH HUB PD1857 AND ROTORS PG2027-1 & PG2027-2 (AFTER 3/24 WITH 2.44" DUST CAPS) ON NON-UFP AXLES - 5,200-POUND NON-UFP AXLES (2"x3" SPRING AND 3-1/2" TORSION) USING SEAL WITH 2.23" INSIDE DIAMETER - SELECT 6-LUG NON-UFP HUBS (D-MAX, KODIAK, DRUM) ON NON-UFP AXLES ON AXLES USING A SEAL WITH 2.23" INSIDE DIAMETER INCLUDES: 1 x PE1550 BEARING HD 1-1/4" (15123) 1 x PE1600 BEARING 1-3/4" (25580) 1 x PE1850 RACE HD 1-1/4" (15245) 1 x PE1900 RACE 1-3/4" (25520) 1 x PE2100 SEAL 1-3/4" (22333) 1 x PH2014 COTTER PIN 1/8" x 1-3/4" PLATED

PE1255 ~ BEARING KIT 1-1/4" x 1-3/4" 8-LUG NON-UFP HUBS

REPRESENTATION PHOTO MAGIC TILT BEARING KIT ~ PE1255 USE WITH 8-LUG HUB PD1860 OR ROTORS PG2028-1 AND PG2028-2 ON NON-UFP AXLES INCLUDES: 1 x PE1555 BEARING 1-1/4" (14125A) 1 x PE1600 BEARING 1-3/4" (25580) 1 x PE1855 RACE 1-1/4" 8-LUG (14276) 1 x PE1900 RACE 1-3/4" (25520) 1 x PE2100 SEAL 1-3/4" (22333) 1 x PH2014 COTTER PIN 1/8" x 1-3/4" PLATED

PE1256 ~ BEARING KIT 1-1/4" x 1-3/4" 8-LUG UFP HUBS

REPRESENTATION PHOTO MAGIC TILT BEARING KIT ~ PE1256 USE WITH 8-LUG HUB PD1860 OR ROTORS PG2028-1 AND PG2028-2 ON UFP AXLES INCLUDES: 1 x PE1555 BEARING 1-1/4" (14125A) 1 x PE1600 BEARING 1-3/4" (25580) 1 x PE1855 RACE 1-1/4" 8-LUG (14276) 1 x PE1900 RACE 1-3/4" (25520) 1 x PE2101 UFP SEAL 1-3/4" (21333) 1 x PH2012 x COTTER PIN 1/8" x 1-1/4" (UFP AXLE)

PE1400 ~ BEARING 1-1/16" (44649)

REPRESENTATION PHOTO MAGIC TILT BEARING ~ PE1400 SOLD INDIVIDUALLY

PE1450 ~ BEARING 1-3/8" (68149)

REPRESENTATION PHOTO MAGIC TILT BEARING ~ PE1450 SOLD INDIVIDUALLY

PE1500 ~ BEARING 1-1/4" (67048)

REPRESENTATION PHOTO MAGIC TILT BEARING ~ PE1500 SOLD INDIVIDUALLY

PE1550 ~ BEARING 1-1/4" (15123)

REPRESENTATION PHOTO MAGIC TILT H.D. BEARING ~ PE1550 SOLD INDIVIDUALLY

PE1555 ~ BEARING 1-1/4" (14125A)

REPRESENTATION PHOTO MAGIC TILT BEARING ~ PE1555 SOLD INDIVIDUALLY FOR 8 LUG HUBS

PE1600 ~ BEARING 1-3/4" (25580)

REPRESENTATION PHOTO MAGIC TILT BEARING ~ PE1600 SOLD INDIVIDUALLY

PE1710 ~ RACE 1-1/16" (44610)

REPRESENTATION PHOTO MAGIC TILT RACE ~ PE1710 SOLD INDIVIDUALLY

PE1749 ~ RACE 1-3/8" (68110)

REPRESENTATION PHOTO MAGIC TILT RACE ~ PE1749 SOLD INDIVIDUALLY

PE1750 ~ RACE 1-3/8" (68111)

REPRESENTATION PHOTO MAGIC TILT RACE ~ PE1750 SOLD INDIVIDUALLY

PE1800 ~ RACE 1-1/4" (67010)

REPRESENTATION PHOTO MAGIC TILT RACE ~ PE1800 SOLD INDIVIDUALLY

PE1850 ~ RACE 1-1/4" (15245)

REPRESENTATION PHOTO MAGIC TILT H.D. RACE ~ PE1850 SOLD INDIVIDUALLY FOR 6 LUG HEAVY DUTY NON-UFP HUBS

PE1855 ~ RACE 1-1/4" (14276)

REPRESENTATION PHOTO MAGIC TILT RACE ~ PE1855 SOLD INDIVIDUALLY FOR 8 LUG HUBS

PE1900 ~ RACE 1-3/4" (25520)

REPRESENTATION PHOTO MAGIC TILT RACE ~ PE1900 SOLD INDIVIDUALLY

PE2311 ~ CENTER HOLE CAP RUBBER PLUG (POSI-LUBE)

REPRESENTATION PHOTO MAGIC TILT RUBBER PLUG FOR POSI-LUBE DUST CAPS ~ PE2311 SOLD INDIVIDUALLY FITS ALL MODERN POSI-LUBE DUST CAPS OLDER POSI-LUBE DUST CAPS FOR 6 AND 8-LUG HUBS ONCE USED A LARGER PLUG. ALL NEWER DUST CAPS USE THIS UNIVERSAL PLUG.

PH1305-1 ~ POSI-LUBE SPINDLE AXLE UPGRADE

REPRESENTATION PHOTO MAGIC TILT POSI-LUBE SPINDLE UPGRADE ~ PH1305-1 AXLES DO NOT COME STANDARD WITH THE POSI-LUBE FEATURE. THIS PART NUMBER UPGRADES THE STANDARD SPINDLES ON ONE AXLE TO POSI-LUBE. POSI-LUBE SPINDLES HAVE A GREASE FITTING ON THE END ALLOWING GREASE TO BE PUMPED TO THE BACK OF THE SPINDLE. WHILE MANY OLDER MAGIC TILT AXLES WERE BUILT WITH THIS FEATURE, IT IS NOW RECOMENDED TO USE BEARING PROTECTORS ON THE HUBS.

PH1305-2 ~ POSI-LUBE SPINDLE UPGRADE

REPRESENTATION PHOTO MAGIC TILT POSI-LUBE SPINDLE UPGRADE ~ PH1305-2 AXLES DO NOT COME STANDARD WITH THE POSI-LUBE FEATURE. THIS PART NUMBER UPGRADES THE STANDARD SPINDLES ON ONE AXLE TO POSI-LUBE. POSI-LUBE SPINDLES HAVE A GREASE FITTING ON THE END ALLOWING GREASE TO BE PUMPED TO THE BACK OF THE SPINDLE. WHILE MANY OLDER MAGIC TILT AXLES WERE BUILT WITH THIS FEATURE, IT IS NOW RECOMENDED TO USE BEARING PROTECTORS ON THE HUBS.

PH2145 ~ HUB CONVERSION KIT 1-1/16" SPINDLES (NON-UFP HUBS to UFP AXLES)

REPRESENTATION PHOTO MAGIC TILT HUB CONVERSION KIT ~ PH2145 INCLUDES: ENOUGH HARDWARE TO CONVERT TWO HUBS TO 1-1/16" UFP-STYLE SPINDLES 2 x PE2010 SEAL 1-1/16" UFP (125-198) 2 x PH1980 SPINDLE NUT 13/16" UFP 2 x PH2012 COTTER PIN 1/8" x 1-1/4" UFP 2 x PH2065 3/4" AXLE D WASHER 3/32" UFP 2 x PH2108 SPINDLE NUT RETAINER UFP

PH2150 ~ HUB CONVERSION KIT 1-3/8" SPINDLES (NON-UFP HUBS to UFP AXLES)

REPRESENTATION PHOTO MAGIC TILT HUB CONVERSION KIT ~ PH2150 INCLUDES: ENOUGH HARDWARE TO CONVERT TWO HUBS TO 3.5K UFP-STYLE SPINDLES 2 x PE2055 SEAL 1-3/8" UFP (168-257) 2 x PH1980 SPINDLE NUT 13/16" UFP 2 x PH2012 COTTER PIN 1/8" x 1-1/4" UFP 2 x PH2065 3/4" AXLE D WASHER 3/32" UFP 2 x PH2108 SPINDLE NUT RETAINER UFP

PH2155 ~ HUB CONVERSION KIT 1-3/4" SPINDLES (NON-UFP HUBS to UFP AXLES)

REPRESENTATION PHOTO MAGIC TILT HUB CONVERSION KIT ~ PH2155 INCLUDES: ENOUGH HARDWARE TO CONVERT TWO HUBS TO ALL UFP-STYLE 1-1/4" x 1-3/4" SPINDLES 2 x PE2101 SEAL 1-3/4" UFP (21333) 2 x PH1980 SPINDLE NUT 13/16" UFP 2 x PH2012 COTTER PIN 1/8" x 1-1/4" UFP 2 x PH2066 3/4" AXLE D WASHER 3/16" UFP 2 x PH2108 SPINDLE NUT RETAINER UFP

PH2165 ~ CONVERSION KIT (6 & 8-LUG UFP ROTORS & HUBS TO NON-UFP AXLES)

REPRESENTATION PHOTO MAGIC TILT HUB/ROTOR CONVERSION KIT ~ PH2165 INCLUDES: ENOUGH HARDWARE TO CONVERT TWO 6 OR 8-LUG ROTORS OR HUBS TO EITHER 1" D OR 1" ROUND SPINDLES 2 x PE2100 SEAL 1-3/4" NON-UFP (22333) 2 x PH2014 COTTER PIN 1/8" x 1-3/4" (1" SPINDLE THREADS) 2 x PH2000 AXLE NUT 1" CASTLE NON-UFP 2 x PH2105 TANG WASHER (1" D-SPINDLES) 2 x PH2070 SPINDLE WASHER (1" D-SPINDLES) 2 x PH2060 SPINDLE WASHER (1" ROUND SPINDLES)