TrailerPro — Product Feed

Spindle Seal Kits for UFP Spindles

Contains: 2 Rings and 2 O-Rings Size: OD 1-5/8" Diameter: ID 1-3/8" Spindle: 1-3/8" Brand: UFP

Spindle Seal Kits for UFP Spindles

Contains: 2 Rings and 2 O-Rings Size: OD 1-3/8" Diameter: ID 1-1/16" Spindle: 1-1/16" Brand: UFP

3" CHANNEL U-BOLT KIT (Minimum Order of 20 Each)

Contains: 1 - 7/16X3-1/16X2-13/16 Ubolt, 2- 7/16 Lock Washers, and 2- 7/16 Nut NOTE: Minimum order of 20

PM1275 ~ WINCH SINGLE-SPEED 1800 LBS.

REPRESENTATION PHOTO MAGIC TILT WINCH W/ STRAP ~ PM1275 TYPE: SINGLE SPEED WINCH CAPACITY: 1800 LBS. STRAP WIDTH: 2" BRAND: DL INCLUDES WINCH STRAP DOES NOT INCLUDE MOUNTING HARDWARE

7/16" Bunk Bracket UBolts W/Nuts

Contains: Part Description Qty PY1406 NUT HEX 7/16 HDG 2 PY1515 WASHER FLAT USS 1/2 HDG 2 PY1606 WASHER LOCK 7/16 HDG 2 PY2090 UBOLT 7/16X3-1/16X2-13/16 SQ GALV 1

1/2" Stainless Steel Square UBolts

Features: Heavy-duty U-bolt helps to secure a bracket to your trailer's frame Stainless steel construction is sturdy and resists corrosion Made in the USA

1/2" Stainless Steel Square UBolts

Features: Heavy-duty U-bolt helps to secure a bracket to your trailer's frame Stainless steel construction is sturdy and resists corrosion Made in the USA

1/2" Stainless Steel Square UBolts

Features: Heavy-duty U-bolt helps to secure a bracket to your trailer's frame Stainless steel construction is sturdy and resists corrosion Made in the USA

1/2" Stainless Steel Square UBolts

Features: Heavy-duty U-bolt helps to secure a bracket to your trailer's frame Stainless steel construction is sturdy and resists corrosion Made in the USA

3/8" Stainless Steel Square UBolts

Features: Heavy-duty U-bolt helps to secure a bracket to your trailer's frame Stainless steel construction is sturdy and resists corrosion Made in the USA

Galvanized Hex Head Screws

SPECS SKU: PY1650 Material: Galvanized Diameter: 3/8" Length: 1-1/4"

Galvanized Hex Head Screws

SPECS SKU: PY1615 Material: Galvanized Diameter: 3/8" Length: 2-1/2"

Galvanized Hex Head Screws

SPECS SKU: PY1620 Material: Galvanized Diameter: 3/8" Length: 4"

Galvanized Hex Head Screws

SPECS SKU: PY1624 Material: Galvanized Diameter: 3/8" Length: 4-1/2"

Galvanized Hex Head Screws

SPECS SKU: PY1632 Material: Galvanized Diameter: 3/8" Length: 5-1/2"

Galvanized Hex Head Screws

SPECS SKU: PY1655 Material: Galvanized Diameter: 1/2" Length: 1-1/2"

Aluminum Fenders for Single Axle Trailers

Features: Round fender covers 1 tire on your single-axle trailer Acts as a splash guard to keep road debris from hitting other vehicles and to help protect your trailer's cargo Diamond tread plating provides a stylish look and non-slip surface Sturdy, lightweight, 14-gauge aluminum construction resists corrosion bolt-on installation Not pre-drilled Mounting brackets for bolt-on installation sold separately Made in the USA

Aluminum Fenders for Single Axle Trailers

Features: Round fender covers 1 tire on your single-axle trailer Acts as a splash guard to keep road debris from hitting other vehicles and to help protect your trailer’s cargo Diamond tread plating provides a stylish look and non-slip surface Sturdy, lightweight, 14-gauge aluminum construction resists corrosion bolt-on installation Not pre-drilled Mounting brackets for bolt-on installation sold separately Made in the USA

Aluminum Fenders for Single Axle Trailers

PM1445 ~ WINCH TWO-SPEED 3200 LBS.

REPRESENTATION PHOTO MAGIC TILT WINCH W/ STRAP ~ PM1445 TYPE: TWO SPEED WINCH CAPACITY: 3200 LBS. STRAP WIDTH: 3" BRAND: DL INCLUDES HD YELLOW WINCH STRAP DOES NOT INCLUDE MOUNTING HARDWARE

PM1175 ~ WINCH SINGLE-SPEED 1400 LBS.

REPRESENTATION PHOTO MAGIC TILT WINCH W/ STRAP ~ PM1175 TYPE: SINGLE SPEED WINCH CAPACITY: 1400 LBS. STRAP WIDTH: 2" STRAP LENGTH: 20' BRAND: DL DOES NOT INCLUDE MOUNTING HARDWARE

Two Speed Winches

Features: Heavy-duty winch is designed for horizontal pulling High carbon steel gears Permanently lubricated bearings Ergonomic handle grip Zinc TUFFPLATE finish Handle included Made in the USA

PM1415 ~ WINCH TWO-SPEED 2500 LBS.

REPRESENTATION PHOTO MAGIC TILT WINCH W/ STRAP ~ PM1415 TYPE: TWO SPEED WINCH CAPACITY: 2500 LBS. STRAP WIDTH: 2" BRAND: DL INCLUDES WINCH STRAP DOES NOT INCLUDE MOUNTING HARDWARE

PM1455 ~ WINCH TWO-SPEED 3500 LBS.

REPRESENTATION PHOTO MAGIC TILT WINCH W/ STRAP & BRAKE ~ PM1455 TYPE: TWO SPEED W/ STRAP & BRAKE CAPACITY: 3500 LBS. STRAP WIDTH: 3" BRAND: DL INCLUDES HD WINCH STRAP AND BRAKE DOES NOT INCLUDE MOUNTING HARDWARE

PO2170-1 ~ WINCH SEAT STANDARD

REPRESENTATION PHOTO MAGIC TILT WINCH SEAT ~ PO2170-1 TYPE: STANDARD WINCH SEAT BRACKET LENGTH: 18-1/2" WINCH POST WIDTHS: 2" TO 3" MATERIAL: GALVANIZED NOTES: 5" WINCH BASE W/ PRE-DRILLED HOLES MOUNTING HARDWARE SOLD SEPARATLEY USE WITH 4" BOW ROLLERS / STOPS

PO2190 ~ WINCH SEAT HEAVY-DUTY

REPRESENTATION PHOTO MAGIC TILT WINCH SEAT ~ PO2190 TYPE: HEAVY DUTY WINCH SEAT ARM LENGTH: 20" MATERIAL: GALVANIZED NOTES: HAS 20" LONG ROLLER BRACKET & 12" x 5" WINCH BASE W/ PRE-DRILLED HOLES MOUNTS ON 3" WIDE POST MOUNTING HARDWARE SOLD SEPARATELY USE WITH 4" BOW ROLLERS / STOPS

PO2240 ~ WINCH SEAT LIGHT-DUTY

REPRESENTATION PHOTO MAGIC TILT WINCH SEAT ~ PO2240 TYPE: LIGHT-DUTY WINCH SEAT ARM LENGTH: 18" WINCH SEAT: 3" x 9-1/2" MATERIAL: GALVANIZED NOTES: MOUNTING HARDWARE AND ROLLER NOT INCLUDED MOUNTS TO WINCH POST BY EITHER: WRAPING WITH 1/2" U-BOLTS AND PK1320 PLATES OR THROUGH-BOLTED WITH BOLTS USE WITH 3" BOW ROLLERS / STOPS

PO2191 ~ WINCH SEAT HEAVY-DUTY (NO ARMS)

REPRESENTATION PHOTO MAGIC TILT WINCH SEAT ~ PO2191 TYPE: SUPER HEAVY-DUTY WINCH SEAT (NO ARMS) LENGTH: 11-1/2" WIDTH: 5" HEIGHT: 9" MATERIAL: GALVANIZED NOTES: MOUNTS ON 3" WIDE POST WITH TWO 1/2" DIAMETER U-BOLTS MOUNTING HARDWARE SOLD SEPARATELY

PO2171 ~ WINCH SEAT STANDARD (NO ARMS)

REPRESENTATION PHOTO MAGIC TILT WINCH SEAT ~ PO2171 TYPE: HD WINCH SEAT (NO ARMS) MATERIAL: GALVANIZED LENGTH: 10" HEIGTH: 9" WIDTH: 5" DOES NOT INCLUDE MOUNTING HARDWARE

Bunk Risers

SPECS SKU: PT2218-2 Type: BUNK RISER 7" WITH X-ARM & 8" L BRACKET Fits: 3" wide Crossmember Material: Galvanized Height: 15"

PL2550 ~ LICENSE TAG BRACKET

REPRESENTATION PHOTO MAGIC TILT LICENSE TAG BRACKET ~ PL2550 MATERIAL: THERMOPLASTIC NOTES: MOUNTS BETWEEN LEFT TAIL LAMP AND TAIL LAMP MOUNTING BRACKET

Tail Light Brackets

SPECS SKU: PL2800 Material: Galvanized Type: Bolt-On Light Bracket CB

Tail Light Brackets

Galvanized Cross-member "L" Brackets - PT2209-6" X-ARM, GALV, 8 HOLE

6" X-ARM-L VERTICAL BUNK BRACKET, GALV, 8-HOLE

PT2205 ~ CROSSMEMBER BUNK "L" BRACKET LOW PROFILE GALVANIZED

REPRESENTATION PHOTO MAGIC TILT CROSSMEMBER BUNK "L" BRACKET TYPE: LOW PROFILE "L" BRACKET MATERIAL: GALVANIZED WIDTH: 5-1/2" HEIGTH: 3" HOLE SIZE: 1/2" APPLICATION: USED IN PAIRS TO SECURE VERTICAL BUNKS TO 3" WIDE CROSSMEMBERS SOLD INDIVIDUALLY NOTES: ORIGINALLY USED TO SUPPORT ROLLER TRAILER PIVOT ASSEMBLIES. CAN BE USED TO SECURE VERTICAL BUNKS RESTING DIRECTLY ON CROSSMEMBERS. NOT RECOMMENDED FOR VERTICAL BUNKS OVER 6” TALL REQUIRES ONE 1/2" U-BOLT TO MOUNT TO CROSS MEMBER AND ONE 1/2" THRU-BUNK BOLTS (NOT INCLUDED)

Galvanized Cross-member "L" Brackets - PT2210-ADJ "L" BRKT 6"

SPECS SKU:PT2210 Type: 6" X-ARM ADJ "L" VERTICAL BRACKET, GALV, 3-HOLE Material:Galvanized Length:6" Hole Size:1/2"

Galvanized Cross-member "L" Brackets - PT2211-ADJ "L" BRKT 8" [TALL]

SPECS SKU:PT2211 Type:Galv "L" Brackets Material:Galvanized Width:5" Length:8" Hole Size:1/2"

Galvanized Cross-member "L" Brackets - PT2219-ADJ "L" BRKT 10" [TALL]

SPECS SKU:PT2219 Type:"L" Brackets Material:Galvanized Width:5" Length:10

7/16" Galvanized Square UBolts - PY2096-UBOLT 7/16X3-1/16X4-5/16

SPECS SKU: PY2096 Type: UBOLT 7/16X3-1/16X4-5/16 SQ GALV Material: Galv

7/16" Galvanized Square UBolts - PY2095-UBOLT 7/16X4-1/16X2-13/16

SPECS SKU: PY2095 Type: UBOLT 7/16X4-1/16X2-13/16 SQ GALV Material: Galv

Step Pads with Boots - old - 15-1/2

Step Pads with Boots - old - 16

Step Pads with Boots - old - 16-1/2

Step Pads with Boots - old - 12

Step Pads with Boots - old - 13

Step Pads with Boots - old - 13-1/2

Step Pads with Boots - old - 14

Step Pads with Boots - old - 14-1/2

Step Pads with Boots - old - 15

Step Pads with Boots - old - 10

Step Pads with Boots - old - 11

PI2100 ~ STEP PAD END CAP RIGHT/FRONT OR LEFT/REAR "L"

REPRESENTATION PHOTO THE CORRECT STEP PAD ORIENTATION IS WITH THE FLAT EDGE TO THE FENDER AND THE SMOOTH SLANTED EDGE AWAY FROM THE FENDER. THIS IS HOW YOUR BOOT WILL BE ORIENTED BASED ON THE LOCATION STATED. IF YOU WANT YOUR BOOT MOUNTED THE OPPOSITE WAY, PLEASE SELECT THE OPPOSITE SIDE. MAGIC TILT STEP PAD BOOT ~ PI2100 TYPE: STEP PAD END CAP ORIENTATION: RIGHT/FRONT OR LEFT/REAR DIMENSIONS: 4-1/8" Long x 1-11/16" Tall x 1-1/16" Deep MATERIAL: BLACK RUBBER SOLD INDIVIDUALLY NOTES: ATTACHING SCREW OR RIVET NOT INCLUDED HAS "L" STAMPED ON INSIDE

PI2110 ~ STEP PAD END CAP LEFT/FRONT OR RIGHT/REAR "R"

REPRESENTATION PHOTO THE CORRECT STEP PAD ORIENTATION IS WITH THE FLAT EDGE TO THE FENDER AND THE SMOOTH SLANTED EDGE AWAY FROM THE FENDER. THIS IS HOW YOUR BOOT WILL BE ORIENTED BASED ON THE LOCATION STATED. IF YOU WANT YOUR BOOT MOUNTED THE OPPOSITE WAY, PLEASE SELECT THE OPPOSITE SIDE. MAGIC TILT STEP PAD BOOT ~ PI2110 TYPE: STEP PAD END CAP ORIENTATION: LEFT/FRONT OR RIGHT/REAR DIMENSIONS: 4-1/8" Long x 1-11/16" Tall x 1-1/16" Deep MATERIAL: BLACK RUBBER SOLD INDIVIDUALLY NOTES: ATTACHING SCREW OR RIVET NOT INCLUDED HAS "R" STAMPED ON INSIDE

Disc Brake Calipers - Right

Disc Brake Calipers - Left

Step Pads without Boots - 18.5

Boot sold separately

Step Pads without Boots - 19

Boot sold separately

Step Pads without Boots - 21

Boot sold separately

Step Pads without Boots - 16.5

Specs SKU: PI2012 Type: STEP PAD-ALUM 16-1/2" Boot sold separately

Step Pads without Boots - 17

Specs SKU: PI2014 Type: STEP PAD-ALUM 17" Boot sold separately

Step Pads without Boots - 17.5

Specs SKU: PI2014-1 Type: STEP PAD-ALUM 17-1/2" Boot sold separately

Step Pads without Boots - 18

Specs SKU: PI2052 Type: STEP PAD-ALUM 18" Boot sold separately

Step Pads without Boots - 14

Specs SKU: PI2006 Type: STEP PAD-ALUM 14" Boot sold separately

Step Pads without Boots - 14.5

Specs SKU: PI2007 Type: STEP PAD-ALUM 14-1/2" Boot sold separately

Step Pads without Boots - 15

Specs SKU: PI2007 Type: STEP PAD-ALUM 14-1/2" Boot sold separately

Step Pads without Boots - 15.5

Specs SKU: PI2009 Type: STEP PAD-ALUM 15-1/2" Boot sold separately

Step Pads without Boots - 16

Specs SKU: PI2011 Type: STEP PAD-ALUM 16" Boot sold separately

Step Pads without Boots - 11.5

Specs: SKU: PI2005-1 Type: STEP PAD-ALUM 11-1/2" Boot sold separately

Step Pads without Boots - 12

Specs SKU: PI2005 Type: STEP PAD-ALUM 12" Boot sold separately

Step Pads without Boots - 12.5

Specs SKU: PI2016 Type: STEP PAD - ALUM 12-1/2" Boot sold separately

Step Pads without Boots - 13

Specs SKU: PI2017 Type: STEP PAD - ALUM 13" Boot sold separately

Step Pads without Boots - 13.5

Specs SKU: PI2015 Type: STEP PAD-ALUM 13-1/2" Boot sold separately

Step Pads without Boots - 7.5

Specs: SKU: PI1994 Type: STEP PAD-ALUM. 7-1/2" Boot sold separately

PK1950 ~ EQUALIZER "6-1/2" GALVANIZED

REPRESENTATION PHOTO MAGIC TILT EQUALIZER ~ PK1950 HOLE SIZE: 9/16" (FOR 1/2" GALVANIZED BOLT) WIDTH: 1-3/4" LENGTH: 6-1/8" CENTER OF BOTTOM HOLES MATERIAL: GALVANIZED NOTES: INCLUDES NYLON BUSHINGS

PK2000 ~ EQUALIZER "8" INCH GALVANIZED

REPRESENTATION PHOTO MAGIC TILT EQUALIZER ~ PK2000 HOLE SIZE: 9/16" (FOR 1/2" GALVANIZED BOLT) WIDTH: 1-3/4" LENGTH: 7-3/4" CENTER OF BOTTOM HOLES MATERIAL: GALVANIZED INCLUDES NYLON BUSHINGS

PK1800-T ~ EQUALIZER BOLT-ON PLATE 5-3/4" CA-SERIES GALVANIZED

REPRESENTATION PHOTO MAGIC TILT EQUALIZER PLATE ~ PK1800-T TYPE: EQUALIZER BOLT-ON PLATE APPLICATIN: CA-SERIES TUBE FRAMES WITH BOTTOM CHANNEL HOLE SIZE TO FRAME: 1/2" WIDTH: 2" BOTTOM PLATE HEIGHT: 5-3/4" LENGTH: 5" BOTTOM PLATE MATERIAL: GALVANIZED NOTES: USE WITH PY1701 SQUARE MOUNT BOLTS

PK1810 ~ EQUALIZER BOLT-ON PLATE 4-1/2 in GALVANIZED

REPRESENTATION PHOTO MAGIC TILT EQUALIZER PLATE ~ PK1810 TYPE: EQUALIZER BOLT-ON PLATE HOLE SIZE: 1/2" HOLE CENTERS: 2" x 5" WIDTH: 3" LENGTH: 6" HEIGHT: 4-1/2" MATERIAL: GALVANIZED

PK1800 ~ EQUALIZER BOLT-ON PLATE 5-3/4 in GALVANIZED

REPRESENTATION PHOTO MAGIC TILT EQUALIZER PLATE ~ PK1800 TYPE: EQUALIZER BOLT-ON PLATE HOLE SIZE: 1/2" HOLE CENTERS: 2" x 5" WIDTH: 3" LENGTH: 6" HEIGHT: 5-3/4" MATERIAL: GALVANIZED

PJ1350 ~ DOUBLE-EYE SPRING 20"

REPRESENTATION PHOTO MAGIC TILT LEAF SPRING ~ PJ1350 TYPE: DOUBLE EYE SPRING WIDTH: 1-3/4" LENGTH: 20" CAPACITY: 1500 LBS. # LEAF: 3 DOUBLE-EYE SPRINGS ARE MEASURED FROM THE CENTER OF THE FRONT EYE TO THE CENTER OF THE REAR EYE. NOTES: INCLUDES .58" ID NYLON SPRING BUSHINGS (ALLOWS FOR GALVANIZED 1/2" BOLT) DOES NOT INCLUDE MOUNTING HARDWARE MOUNTING HARDWARE KITS HARDWARE KITS

Double Eye Springs - 3 LF 25-1/4" DE

SPECS SKU: PJ1400 Type: 3L Double Eye Spring Width: 1-3/4" Length: 25-1/4" From Center of Eye to Center of Eye Capacity: 2000 lbs

Double Eye Springs - PJ1370 3 LF 25-1/4" DE 1500#

SPECS SKU: PJ1370 Type: SPRING, DOUBLE EYE, 4 LF DOUBLE EYE 25.25" 1750# Width: 1-3/4" Length: 25-1/4" 2-eye Capacity: 1750 lbs

Double Eye Springs - 4 LF 25-1/4" DE

SPECS SKU: PJ1450 Type: 4 LF Double Eye Spring Width: 1-3/4" Length: 25-1/4" From Center of Eye to Center of Eye Capacity: 2500 lbs

Double Eye Springs - 5 LF 25-1/4" DE

SPECS SKU: PJ1500 Type: 5 Leaf Double Eye Spring Width: 1-3/4" Length: 25-1/4" From Center of Eye to Center of Eye Capacity: 2950 lbs

Double Eye Springs - 6LF 25-1/4"DE 3500#

SPECS SKU: PJ1700 Type: 6 Leaf Double Eye Springs Width: 1-3/4" Length: 25-1/4" From Center of Eye to Center of Eye Capacity: 3500 lbs

Aluminum Cross-member “L” Brackets - PT2202-ADJ'L'BRKT 5-1/2"-ALUM

SPECS SKU:PT2202 Type:Alum "L" Bracket Material:Aluminum Width:5" Height:5-1/2" Hole Size:1/2"

Aluminum Cross-member “L” Brackets - PT2212 - L BRACKET ALUM 8" HD

SPECS SKU: PT2212 Type: X-ARM-L BRACKET ALUM 8" HD [.4 thk] Material:Aluminum Width:5" Height:8" Hole Size:1/2"

Cross-member "L" Brackets W/Brace - 5/1/2002

SPECS SKU:PT2201 Type: X-ARM ADJ "L" BRKT 5-1/2" W/BRACE Material:Galvanized Width:5-1/2" Height:5-1/2" Hole Size:1/2"

Cross-member "L" Brackets W/Brace - 8

SPECS SKU:PT2208 Type: X-ARM ADJ "L" BRKT 8"/W BRACE [HD] Material: Galvanized Width:5-1/2" Height:8" Hole Size:1/2"

Aluminum Tail Light Brackets - Left Hand

SPECS SKU:PL2854 Type:TAIL LIGHT COVER T/B - LH JAMMY Material: Aluminum Width:3-1/4" Length:9" Side:Left Hand Brand:Jammy

Aluminum Tail Light Brackets - Right Hand

SPECS SKU:PL2853 Type:TAIL LIGHT COVER T/B - RH JAMMY Material:Aluminum Width:3-1/4" Length:9" Side:Right Hand Brand:Jammy

Aluminum Tail Light Brackets - Right Hand

SPECS SKU:PL2870 Type:TAIL LIGHT COVER T/B 3/16"-RH Material:Aluminum Width:3-1/2" Length:10" Side:Right Hand

Aluminum Tail Light Brackets - Left Hand

SPECS SKU:PL2875 Type:TAIL LIGHT COVER T/B 3/16"-LH Material:Aluminum Width:3-1/2" Length:10" Side:Left Hand

PS1550 ~ ROLLER BRACKET ASSEMBLY 12" (PONTOON / CAT)

REPRESENTATION PHOTO MAGIC TILT ROLLER BRACKET ASSEMBLY ~ PS1550 TYPE: PONTOON /CAT ROLLER BRACKET ASSEMBLY FITS: 2" x 2" TUBE MATERIAL: GALVANIZED MAIN ROLLER LENGTH: 12" MOUNT HOLE SIZE: 3/8" NOTES: CAN BE USED FOR SPLIT-HULL VESSELS (PONTOONS, HOBIE CATS, CATAMARANS) THAT DON'T REQUIRE FULL-LENGTH SUPPORT MOUNTING HARDWARE NOT INCLUDED USES PS1540 BRACKET USES 2-1/2" STRAIGHT ROLLERS

PS2640 ~ CLAMP-ON ASSEMBLY 3" x 1-1/2" TUBE

REPRESENTATION PHOTO MAGIC TILT CLAMP-ON ASSEMBLY ~ PS2640 TYPE: CLAMP-ON ASSEMBLY W/ RISER AND BUNK BRACKET MATERIAL: GALVANIZED CROSSMEMBER SIZE: 3" x 3" TUBE SIZE: 1/1/2" x 1-1/2" x 12" DESIGNED TO MOUNT HORIZONTAL BUNKS TO 3" x 3" CROSSMEMBERS INCLUDES: 1 x PS2150 SET SCREW W/ NUT PLATED 1 x PS2210 NUT RETAINER PLATE GALV 1 x PS2649 3" x 3" CLAMP-ON SOCKET GALV 1 x PT1760 BUNK RISER 1-1/2" x 1-1/2" x 12" SQUARE GALV 1 x PT2070 PIVOT L BRACKET GALV 2 x PY0409 LAG SCREW 3/8" x 1-1/4" PLATED 3 x PY1405 HEX NUT 3/8-16 GALV 3 x PY1505 FLAT WASHER 3/8" GALV 3 x PY1605 LOCK WASHER 3/8" GALV 1 x PY1615 BOLT 3/8" x 2-1/2" GALV 2 x PY1624 BOLT 3/8" x 4-1/2" GALV

PK1153 ~ 3-AXLE MOUNT KIT 2-EYE 2x3 AXLE GALVANIZED

REPRESENTATION PHOTO MAGIC TILT TRIPLE AXLE MOUNT KIT ~ PK1153 Provides all necessary hardware to mount double-eye springs on three 2" x 3" axles. MATERIAL: GALVANIZED SPRING TYPE: DOUBLE-EYE AXLE: 2" x 3" FOR CORRECT U-BOLT, SELECT NUMBER OF SPRING LEAVES IN DROP-DOWN 3, 4, 5, 6 INCLUDES: 6 x PK1250 x 5-HOLE PLATES GALV 16 x PK1300 x 2-HOLE SHACKLE PLATE GALV 20 x PY0260 x CAPSCREW 1/2" x 3-1/2" GR 5 PLATED 4 x PY0265 x CAPSCREW 1/2" x 4" GR 5 PLATED 24 x PY1315 x NUT NYLOCK 1/2-13 PLATED 24 x PY1410 x NUT HEX 1/2-13 GALV 48 x PY1515 x WASHER FLAT USS 1/2" GALV 24 x PY1610 x WASHER LOCK 1/2" GALV 12 x PY2050 x U-BOLT 1/2" x 2-1/16" x SELECT GALV

3/16" ALUM "V" CROSS MEMBERS - 48"

SPECS SKU: XB5185 Type:[V] Material: Alum Width:3" Height:3" Length:48" Thickness:3/16"

3/16" ALUM "V" CROSS MEMBERS - 54"

SPECS SKU: XB5194 Type:[V] Material: Alum Width:3" Height:3" Length:54" Thickness:3/16"

3/16" ALUM "V" CROSS MEMBERS - 60"

SPECS SKU: XB5192 Type:[V] Material: Alum Width:3" Height:3" Length:60" Thickness:3/16"

3/16" ALUM "V" CROSS MEMBERS - 70"

SPECS SKU: XB4405 Type:[V] Material: Alum Width:3" Height:3" Length:70" Thickness:3/16"

3/16" ALUM "V" CROSS MEMBERS - 76"

SPECS SKU: XB4429 Type:[V] Material: Alum Width:3" Height:3" Length:76" Thickness:3/16"

3/16" ALUM "V" CROSS MEMBERS - 79"

SPECS SKU: XB4442 Type:[V] Material: Alum Width:3" Height:3" Length:79" Thickness:3/16"

3/16" ALUM "V" CROSS MEMBERS - 79-1/2"

SPECS SKU: XB4430 Type:V Material: Alum Width:3" Height:3" Length:79-1/2" Thickness:3/16"

1/4" ALUM "V" CROSS MEMBERS - 48"

SPECS SKU: XB5190 Type:[V] Material: Alum Width:3" Height:3" Length:48" Thickness:1/4"

1/4" ALUM "V" CROSS MEMBERS - 54"

SPECS SKU: XB5189 Type:[V] Material: Alum Width:3" Height:3" Length:54" Thickness:1/4"

1/4" ALUM "V" CROSS MEMBERS - 60"

SPECS SKU: XB5195 Type:V Material: Alum Width:3" Height:3" Length:60" Thickness:1/4"

1/4" ALUM "V" CROSS MEMBERS - 70"

SPECS SKU: XB4413 Type:[V] Material: Alum Width:3" Height:3" Length:70" Thickness:1/4"

1/4" ALUM "V" CROSS MEMBERS - 79"

SPECS SKU: XB4440 Type:[V] Material: Alum Width:3" Height:3" Length:79" Thickness:1/4"

1/4" ALUM "STRAIGHT" CROSS MEMBERS - 70"

SPECS SKU: XB5167 Type: Straight Material: Alum Width:3" Height:3" Length:70" Thickness:1/4"

1/4" ALUM "STRAIGHT" CROSS MEMBERS - 79"

SPECS SKU:XB4445 Type:Straight Material:Alum Width:3" Height:3" Length:79" Thickness:1/4"

1/4" ALUM "STRAIGHT" CROSS MEMBERS - 60"

SPECS SKU: XB5164 Type: Straight Material: Alum Width:3" Height:3" Length:60" Thickness:1/4"

3/16" ALUM "STRAIGHT" CROSS MEMBERS - 79"

SPECS SKU: XB4444 Type:Straight Material:Alum Width:3" Height:3" Length:79" Thickness:3/16"

3/16" ALUM "STRAIGHT" CROSS MEMBERS - 82"

SPECS SKU: XB4458 Type:Straight Material:Alum Width:3" Height:3" Length:82" Thickness:3/16"

3/16" ALUM "STRAIGHT" CROSS MEMBERS - 48"

SPECS SKU: XB5184 Type:Straight Material:Alum Width:3" Height:3" Length:48" Thickness:3/16"

3/16" ALUM "STRAIGHT" CROSS MEMBERS - 60"

SPECS SKU: XB5193 Type: Straight Material:Alum Width:3" Height:3" Length:60" Thickness:3/16"

3/16" ALUM "STRAIGHT" CROSS MEMBERS - 70"

SPECS SKU: XB4403 Type: Straight Material: Alum Width:3" Height:3" Length:70" Thickness:3/16"

XB4291 ~ CROSSMEMBER GALVANIZED 3" x 3" x UP TO 79-1/2" VEE

REPRESENTATION PHOTO MAGIC TILT CROSSMEMBER ~ XB4291 TYPE: V SIZE: 3" x 3" LENGTH: STRAIGHT-LINE UP TO 79-1/2" (SELECT) THICKNESS: 7 GA MATERIAL: GALVANIZED SELECT LENGTH IN DROP-DOWN LENGTH IS STRAIGHT-LINE ACROSS NOTES: MOUNTING HARDWARE SOLD SEPARATELY CUT ENDS WILL NOT BE HOT-DIPPED GALVANIZED DOES NOT HAVE ANY PRE-DRILLED HOLES END CAPS NOT INCLUDED

11GA Galvanized Cross members W/Yoke - 69"

SPECS SKU:XB7305 Type:[V] Material:Galv Width:3" Height:3" Length:69" Thickness:11GA

11GA Galvanized Cross members W/Yoke - 71"

SPECS SKU:XB7310 Type:[V] Material:Galv Width:3" Height:3" Length:71" Thickness:11GA

2"x2" 93" Track 76" SC "V" Spring Axles - 5L HD

SPECS SKU: PH4766 Material: Galvanized Capacity: 3500Lbs Hubs: 5L HD Bearings/Bearings:1-3/8X1-1/16" Spring:76" Track:93" Also available in Galvanize Hubs

2"x2" 93" Track 76" SC "V" Spring Axles - 5L DISC BRAKE

SPECS SKU:PH4766-1 Type:V Material:Galvanized Capacity:3500Lbs Hubs:5 Lug Disc Brakes Spindle/Bearing:1-3/8X1-1/16" Spring Centers:76" Track:93" Brand:UFP Lug Nuts included

2"x2" 93" Track 76" SC "V" Spring Axles - [NO HUBS]

SPECS SKU: PH4767 Type: V Material: Galvanized Capacity: 3500Lbs Hubs: NONE Spindle/Bearing:1-3/8X1-1/16" SpringCenters:76" Track:93"

2"x2" 93" Track 76" SC "V" Spring Axles - ED [NO HUBS]

SPECS SKU: PH4738 Type:V Size:2"x2" Tube Material:Galvanized Capacity:2500 Lbs Hubs:None Spindle/Bearing:1-1/16"X1-1/16' SpringCenter:76" Track:93" Brand:UFP

2"x2" 93" Track 76" SC "V" Spring Axles - Drum Brakes

SPECS SKU:PH3982 Type: V Size: 2"x2" Tube Material: Galvanized Capacity: 3500Lbs Hubs:10" Drum Brakes Spindle/Bearings:1-3/8X1-1/16" SpringCenters:76" Track:93"

2"x2" 93" Track 76" SC "V" Spring Axles - 5L ED

SPECS SKU: PH4737 Type: V Drop TubeSize: 2"x2" Tube Material: Galvanized Capacity:2500Lbs Hubs: 5L ED Spindle/Bearings:1-1/16X1-1/16" SpringCenters:76" Track:93"

2"x2" 93" Track 76" SC "V" Spring Axles - [VAULT DISC]

SPECS SKU: PH4767-V Type: V Material: Galvanized Capacity:3500Lbs Hub Size: 10" 5 Lug [VAULT DISC] Spindle/Bearings:1-3/8X1-1/16" SpringCenters:76" Track:93" Brand:UFP

2" x 2" 93" Track 76"SC Straight Spring Axles - 5L HD

SPECS SKU: PH4762 TubeSize: 2"X2" Straight Material: Galvanized Capacity: 3500Lbs Hubs: 5 Lug Spindle/Bearings:1-3/8X1-1/16" SpringCenters:76" Track:93" Brand: UPF

2" x 2" 93" Track 76"SC Straight Spring Axles - 5L DISC BRK

SPECS SKU: PH4762-1 TubeSize: 2x2 Straight Material: Galvanized Capacity: 3500Lbs Hubs: 5 Lug W/Disc Brakes Spindle/Bearings:1-3/8X1-1/16" SpringCenters: 76" Track: 93" Brand: UFP

2" x 2" 93" Track 76"SC Straight Spring Axles - [NO HUBS]

SPECS SKU: PH4768 TubeSize: 2x2 Straight Material: Galvanized Capacity: 3500Lbs Hubs: No Hubs Spindle/Bearings: 1-3/8X1-1/16" SpringCenters: 76" Track: 93" Brand: UFP

2"x2" 93" Track 75"SC "V" Spring Axles - 5L HD

SPECS SKU: PH4720 Tube:2x2 V drop Material: Galvanized Capacity: 3500Lbs Hubs: 5 Lug Spindle/Bearings:1-3/8"X1-1/16" SpringCenters:75" Track:93" Brand: UFP

2"x2" 93" Track 75"SC "V" Spring Axles - HD W/FLNG

SPECS SKU: PH4677 TubeSize: 2x2 V Drop Material: Galvanized Capacity: 3500Lbs Hubs: 5L HD W/FLNG Spindle/Bearings: 1-3/8"X1-1/16" SpringCenters: 75" Track: 93" Brand: UFP

2"x2" 93" Track 75"SC "V" Spring Axles - 5L DISC BRK

SPECS SKU:PH3936 TubeSize:2x2 V Drop Material: Galvanized Capacity: 3500Lbs Hubs: 5L DISC BRAKE Spindle/Bearings: 1-3/8"X1-1/16" SpringCenters:75" Track: 93" Brand: UFP

2"x2" 93" Track 75"SC "V" Spring Axles - [NO HUBS]

SPECS SKU:PH4721 TubeSize:2x2 V Drop Material: Galvanized Capacity: 3500Lbs Hubs: NO HUBS Spindle/Bearings: 1-3/8"X1-1/16" SpringCenters: 75" Track: 93" Brand: UFP

2"x2" 93" Track 75"SC "V" Spring Axles - Drum Brakes

SPECS SKU: PH4678 TubeSize: 2x2 V Drop Material: Galvanized Capacity: 3500Lbs Hubs:5 Lug Drum Brakes Spindle/Bearings: 1-3/8"X1-1/16" SpringCenters:75" Track: 93" Brand: UFP

2"x2" 93" Track 75"SC Straight Spring Axles - 5L HD

SPECS SKU:PH6096 TubeSize:2x2 Straight Material: Galvanized Capacity: 3500Lbs Hubs: 5L HD Spindle/Bearings: 1-3/8"X1-1/16" SpringCenters:75" Track: 93" Brand: UFP

2"x2" 93" Track 75"SC Straight Spring Axles - [NO HUBS]

SPECS SKU: PH6097 TubeSize: 2x2 Straight Material: Galvanized Capacity: 3500Lbs Hubs: NO HUBS Spindle/Bearings: 1-3/8"X1-1/16" SpringCenters: 75" Track: 93" Brand: UFP

Side Markers Lights - PL0505-Amb Replacement Lens

SPECS: SKU: PL0505 Type: AMBER REPLACEMENT LENS

Side Markers Lights - PL1442-Red Stick on Reflector

SPECS: SKU: PL1442 Type: RED STICK-ON REFLECTOR

Side Markers Lights - PL1184-LED Amb CL/Side Mrkr

SPECS: SKU: PL1184 Type: LED AMBER CLEARANCE/MARKER LIGHT Dimensions: 2-1/8" long x 1-1/8" tall x 1-1/16" deep

Side Markers Lights - PL1065-Amb CL/Side Mrkr

SPECS SKU: PL1065 Type: AMBER CL/SIDE MRKR Dimensions: 2-1/8" long x 1-1/8" tall x 1-1/16" deep

Side Markers Lights - PL1400-Side Marker Square

SPECS SKU: PL1400 Type: AMB. CLEARANCE LIGHT - SQUARE

HYDRAULIC RUBBER BRAKE HOSES - 7ft

SPECS SKU: PG1184 Type:Hyd Brake Hose W/Swivel Length: 7ft Thread: 3/8-24"

HYDRAULIC RUBBER BRAKE HOSES - 20ft

SPECS SKU: PG1189 Type: Hyd Brake Hose W/Swivel Length: 20ft Thread: 3/8-24"

HYDRAULIC RUBBER BRAKE HOSES - 21ft

SPECS SKU: PG1190 Type: Hyd Brake Hose W/Swivel Length: 21ft Thread: 3/8-24"

HYDRAULIC RUBBER BRAKE HOSES - 23ft

SPECS SKU: PG1192 Type: Hyd Brake Hose W/Swivel Length: 23ft Thread: 3/8-24"

HYDRAULIC RUBBER BRAKE HOSES - 24ft

SPECS SKU: PG1193 Type: Hyd Brake Hose W/Swivel Length: 24ft Thread: 3/8-24"

HYDRAULIC RUBBER BRAKE HOSES - 26ft

SPECS SKU: PG1194 Type: Hyd Brake Hose W/Swivel Length: 26ft Thread: 3/8-24"

HYDRAULIC RUBBER BRAKE HOSES - 28ft

SPECS SKU: PG1196 Type: Hyd Brake Hose W/Swivel Length: 28ft Thread: 3/8-24"

HYDRAULIC RUBBER BRAKE HOSES - 30ft

SPECS SKU: PG1198 Type: Hyd Brake Hose W/Swivel Length: 30ft Thread: 3/8-24"

HYDRAULIC RUBBER BRAKE HOSES - 18in

SPECS SKU: PG1173 Type: Hyd Brake Hose W/Swivel Length: 18in Thread: 3/8-24"

HYDRAULIC RUBBER BRAKE HOSES - 1ft

SPECS SKU: PG1178 Type: Hyd Brake Hose W/Swivel Length: 1ft Thread: 3/8-24"

HYDRAULIC RUBBER BRAKE HOSES - 4ft

SPECS SKU: PG1181 Type: Hyd Brake Hose W/Swivel Length: 4ft Thread: 3/8-24"

HYDRAULIC RUBBER BRAKE HOSES - 6ft 6in

SPECS SKU: PG1183 Type: Hyd Brake Hose W/Swivel Length: 6ft 6in Thread: 3/8-24"

HYDRAULIC RUBBER BRAKE HOSES - 8ft

SPECS SKU: PG1186 Type: Hyd Brake Hose W/Swivel Length: 8ft Thread: 3/8-24"

HYDRAULIC RUBBER BRAKE HOSES - 16ft

SPECS SKU: PG1185 Type: Hyd Brake Hose W/Swivel Length: 16ft Thread: 3/8-24"

HYDRAULIC RUBBER BRAKE HOSES - 18ft

SPECS SKU: PG1187 Type: Hyd Brake Hose W/Swivel Length: 18ft Thread: 3/8-24"

10" Disc Brake Assemblies - Stainless Steel

Contains: Description BEARING 1-1/16" [44649] qty2 BEARING 1-3/8" [68149] qty2 SEAL 1-3/8"[UFP][257-168] qty2 BEARING PROTECTOR SET S/S #1.980 qty1 DISC ROTOR AND HUB S/S 10" 5L [UFP] qty2 DISC BRAKE CALIPER S/S LH [UFP DB35 qty1 DISC BRAKE CALIPER S/S RH [UFP DB35 qty1 7/16"X1"SHCS BOLT [UFP DISC CALIPER qty4 COTTER PIN 1/8"X1-1/4"[UFP AXLE] qty2

12" Disc Brake Assemblies - Zinc Plated

Contains: Description LUG NUT 13/16" qty12 BEARING 1-1/4" [67048] qty2 BEARING 1-3/4" [25580] qty2 SEAL 1-3/4"[UFP][21333] qty2 BEARING PROTECTOR #2.328[EACH] qty2 DISC ROTOR AND HUB 12" 6LUG [UFP] qty2 DISC BRAKE CALIPER ASSY LH [UFP DB3 qty1 DISC BRAKE CALIPER ASSY RH-[UFP DB3 qty1 7/16"X1"SHCS BOLT [UFP DISC CALIPER qty4 COTTER PIN 1/8"X1-1/4"[UFP AXLE] qty2

PG2035 DISC BRAKE ASSEMBLY 8-LUG (DEXTER / UFP)

12" Disc Brake Assemblies - Stainless Steel

Contains: Description BEARING 1-1/4" [67048] qty2 BEARING 1-3/4" [25580] qty2 SEAL 1-3/4"[UFP][21333] qty2 BEARING PROTECTOR SET #2.717 qty1 DISC ROTOR AND HUB S/S 12" 8L [UFP] qty2 DISC BRAKE CALIPER S/S LH [UFP DB35 qty1 DISC BRAKE CALIPER S/S RH [UFP DB35 qty1 7/16"X1"SHCS BOLT [UFP DISC CALIPER qty4 COTTER PIN 1/8"X1-1/4"[UFP AXLE] qty2

PS1010 ~ KEEL ROLLER ASSEMBLY 5"

REPRESENTATION PHOTO MAGIC TILT ROLLER ASSEMBLY ~ PS1010 TYPE: KEEL ROLLER ASSMEBLY SIZE: 5" BLACK RUBBER ROLLER WIDTH: 5-1/2" HEIGHT: 8" TALL NOTES: KEEL ROLLERS ARE NOT INTENDED AS WEIGHT-BEARING STRUCTURES BUT AS A GUIDE AND PROTECTIVE DEVICE. WHEN PROPERLY ADJUSTED, THE KEEL SHOULD JUST TOUCH OR JUST CLEAR THE ROLLER. MOUNTING HARDWARE NOT INCLUDED

PS1280 ~ KEEL ROLLER BRACKET ASSEMBLY 8"

REPRESENTATION PHOTO MAGIC TILT ROLLER ASSEMBLY ~ PS1280 TYPE: KEEL ROLL BRACKET ASSEMBLY BRACKET DIMENSIONS: 1-1/2" x 8-1/2" ROLLER SIZE: 8" WITH 5/8" SHAFT MOUNT HOLE DIAMETER: 3/8" MATERIAL: YELLOW PVC NOTES: MOUNTING HARDWARE NOT INCLUDED NOT ADJUSTABLE

KEEL ROLL BRACKET ASSY - 10" Keel-PVC Yellow

SPECS SKU: PS1310 Type: 10" Keel Roll Assy - PVC Yellow Roller Size: 10" Width: 10-1/4" Height: 8"

KEEL ROLL BRACKET ASSY - 10" Keel-Poly

SPECS SKUPS1310-1 Type: 10" Keel Roll Assy - Poly Roller Size: 10" Material: Poly Width: 10-1/4" Height: 8"

Single Eye Spring - 2 LF 30" SE

SPECS SKU: PJ1100 Type: 2Leaf Slipper Spring Width: 1-3/4" Length: 30" From Center of Eye to End of Spring

Single Eye Spring - 3 LF 24" SE

SPECS SKU: PJ1050 Type: 3Leaf Single Eye Spring Width: 1-3/4" Length: 24" From Center of Eye to End of Spring Capacity: 750 lbs

Single Eye Spring - 3LF 27" SE [MT14]

SPECS SKU: PJ0992 Type: 3LeafSingle Eye Spring Fits: MT14 Trailers Width: 1-3/4" Length: 27" Brand: Karavan

Single Eye Spring - 3 LF 30" SE

SPECS SKU: PJ1150 Type: 3Leaf Single Eye Spring Width: 1-3/4" Length: 30" From Center of Eye to End of Spring Capacity: 1500 lbs

Single Eye Spring - 4 LF 24" SE

SPECS SKU: PJ1055 Type: 4Leaf Single Eye Spring Width: 1-3/4" Length: 24" From Center of Eye to End of Spring Capacity: 1000 lbs

Single Eye Spring - 4 LF 30" SE

SPECS SKU: PJ1200 Type: 4Leaf Single Eye Spring Width: 1-3/4" Length: 30" From Center of Eye to End of Spring Capacity: 2000 lbs

Single Eye Spring - 5 LF 30" SE

SPECS SKU: PJ1250 Type: 5Leaf Single Eye Spring Width: 1-3/4" Length: 30" From Center of Eye to End of Spring Capacity: 2400 lbs

Single Eye Spring - 1 LF 24" SE

SPECS SKU: PJ1000 Type: 2Leaf Slipper Spring Width: 1-3/4" Length: 24" From Center of Eye to End of Spring Capacity: 280 lbs

PT1612 ~ PERMALOCK CLAMP 3"

REPRESENTATION PHOTO MAGIC TILT PERMALOCK CLAMP ~ PT1612 TYPE: PERMALOCK ADJUSTABLE BRACKET CLAMP WIDTH: 3" MATERIAL: GALVANIZED NOTES: FOR USE WITH PT1610 PERMALOCK BUNK BRACKETS REQUIRES 1 x PY0308 5/16" x 3/4" PLATED CARRIAGE BOLT & 1 x PY1291 5/16" FLANGE NUT (NOT INCLUDED)

PIVOT L BRACKETS - Galv "L" BRKT [WIDE]NO Fasteners

SPECS SKU: PT2070 Type: PIVOT L BRKT [WIDE] NO FASTENERS Material: Galvanized Width: 3-1/2" Height: 2"

PIVOT L BRACKETS - Alum "L" BRKT 2"X2" 1/4"

SPECS SKU: PT2075 Type: PIVOT L BRKT ALUMINUM 2"X2" 1/4" Material: Aluminum

PIVOT L BRACKETS - Galv "L"BRKT W/Fasteners

SPECS SKU: PT2050 Type: PIVOT L BRKT W/FASTENERS Material: Galvanized Width: 3-1/2" Height: 2"

Bolster Dimpled Bunk Brackets - 8" BRKT No Pivot Top

SPECS SKU: PT1565 Type: BUNK BRKT- 8" BOLSTER DIMPLED NO PIVOT Material: Galv Width: 2-1/2" Height: 8"

Bolster Dimpled Bunk Brackets - 8" BRKT W/Pivot Top

SPECS SKU: PT1565-1 Type: BUNK BRKT- 8" BOLSTER DIMPLED W/PIVOT Material: Galv Width: 2-1/2" Height: 8"

Bolster Dimpled Bunk Brackets - 10" BRKT No Pivot Top

SPECS SKU: PT1570 Type: BUNK BRKT-10" BOLSTER DIMPLED NO PIVOT TOP Material: Galv Width: 2-1/2" Height: 10"

Bolster Dimpled Bunk Brackets - 10" BRKT W/Pivot Top

SPECS SKU: PT1570-1 Type: BUNK BRKT-10" BOLSTER DIMPLED W/PIVOT TOP Material: Galv Width: 2-1/2" Height: 10"

Bolster Dimpled Bunk Brackets - 12" BRKT No Pivot Top

SPECS SKU: PT1575 Type: BUNK BRKT- 12" BOLSTER DIMPLED NO PIVOT TOP Material: Galv Width: 2-1/2" Height:12"

Bolster Dimpled Bunk Brackets - 12" BRKT W/Pivot Top

SPECS SKU: PT1575-1 Type: BUNK BRKT- 12" BOLSTER DIMPLED W/PIVOT TOP Material: Galv Width: 2-1/2" Height: 12"

Aluminum Smooth Fenders for Single Axle Trailers - Fender 13" Tire(28.5X9X12.50)

SPECS SKU: PI1752-S Type: SGL SMOOTH ALUM FENDER Size: 28.5X9X12.50 Fits:13" Tire Material: Aluminum DECAL NOT INCLUDED

Aluminum Smooth Fenders for Single Axle Trailers - Fender 14" Tire(31.5X9X14)

SPECS SKU: PI1805-S Type: SGL SMOOTH ALUM FENDER Size: 31.5X9X14 Fits: 14" Tire Material: Aluminum DECAL NOT INCLUDED

Aluminum Smooth Fenders for Single Axle Trailers - Fender 15" Tire(33X9X16.5)

SPECS SKU: PI1811-S Type: SGL SMOOTH ALUM FENDER Size: 33X9X16.5 Fits: 15" Tire Material: Aluminum DECAL NOT INCLUDED

Aluminum Smooth Fenders for Single Axle Trailers - Fender 13" Tire(27X9X9.25)

SPECS SKU: PI1753-S Type: SGL SMOOTH ALUM FENDER Size: 27X9X9.25 Fits: 13" Tire Material: Aluminum DECAL NOT INCLUDED

Aluminum Smooth Fenders for Tandem Axle Trailers - Fender 13" Tire(60X9X13.5)

SPECS SKU: PI1857-S Type: TDM Smooth Alum Fender 13" Tire(60X9X13.5) Size: 60X9X13.5 Fits: 13" Tire Material: Aluminum Magic Tilt Non-Skid not included

Aluminum Smooth Fenders for Tandem Axle Trailers - Fender 14" Tire(68X9X14)

SPECS SKU: PI1909-S Type: TDM Smooth Alum Fender 14" Tire(68X9X14) Size: 68X9X14 Fits: 14" Tire Material: Aluminum Magic Tilt Non-Skid not included

Aluminum Smooth Fenders for Tandem Axle Trailers - Fender 15" Tire(68X10X15.75)

SPECS SKU: PI1906-S Type: TDM SMOOTH ALUM FENDER 15" TIRE (68X10X15.75) Size: 68X10X15.75 Fits: 15" Tire Material: Aluminum Magic Tilt Non-Skid not included

Aluminum Smooth Fenders for Tandem Axle Trailers - Fender 16" Tire(72X12X19.5)

SPECS SKU: PI1910-S Type: TDM Smooth Alum Fender 16" Tire(72X12X19.5) Size: 72X12X19.5 Fits: 16" Tire Material: Aluminum Magic Tilt Non-Skid not included

Winch Post Assemblies - PO2189- 1-1/2" X 3" WINCH POST ASSY

SPECS SKU: PO2189 TYPE: 1-1/2" X 3" WINCH POST ASSEMBLY Material: Galv Fits: 2" & 3" Tongue Post: 1-1/2"x3x26"

PO2010 ~ WINCH POST ASSEMBLY CUSTOM 24" (ADJUSTABLE)

REPRESENTATION PHOTO MAGIC TILT WINCH POST ASSEMBLY ~ PO2010 TYPE: ADJUSTABLE WINCH POST W/ SEAT AND BOW STOP MATERIAL: GALVANIZED FITS: 3" WIDE TONGUES HEIGHT (BASE TO ROLLER CENTER): 17" TO 24" APPROX HOLE SIZE: 1/2" NOTES: DOES NOT INCLUDE WINCH OR MOUNDING HARDWARE INCLUDES: BOW ROLLER SAFETY CHAIN

PO1520 ~ WINCH POST ASSEMBLY 36" HEAVY-DUTY

REPRESENTATION PHOTO MAGIC TILT HEAVY-DUTY WINCH POST ASSEMBLY ~ PO1520 TYPE: WINCH POST W/ SEAT & STOP SIZE: 3" x 3" x 36" FITS: 3" WIDE TONGUE BOW ROLLER: 4" WITH BELLS TUBE LENGTH: 36" VERTICAL HEIGHT TO ROLLER CENTER: 20" TO 38" SLOPE: 30-DEGREES FROM VERTICAL (APPROX) MATERIAL: GALVANIZED NOTES: USES PO1470 WINCH POST, PO2170-1 WINCH SEAT, PO6294 ROLLER DOES NOT INCLUDE MOUNTING HARDWARE OR WINCH

PO1510 ~ WINCH POST ASSEMBLY 30" HEAVY-DUTY

REPRESENTATION PHOTO MAGIC TILT WINCH POST ASSEMBLY ~ PO1510 TYPE: HEAVY-DUTY WINCH POST ASSEMBLY MATERIAL: GALVANIZED SIZE: 3" x 3" x 30" VERTICAL HEIGHT TO ROLLER CENTER: 20" TO 34" FITS: 2" TO 3" WIDE TONGUES BOW ROLLER: 4" WITH BELLS BASE PLATE: 6-HOLE WITH 1/2" HOLES SLOPE: 30-DEGREES FROM VERTICAL (APPROX) NOTES: USES PO2160 WINCH POST, PO2170-1 WINCH SEAT, PO6294 ROLLER DOES NOT INCLUDE MOUNTING HARDWARE OR WINCH

Winch Post Assemblies - PO1533-24" HD WINCH POST ASSY

SPECS SKU: H.D.WINCH POST 24" ASSY/SNGL.[YELLOW Material: Galv Post: H.D. WINCH POST 3X3X24" Seat: H.D. WINCH SEAT Rollers: 3" and 3 1/2" BOW STOP ROLLER - PVC YELLOW

PO1535 ~ WINCH POST ASSEMBLY 30" STANDARD-DUTY

REPRESENTATION PHOTO MAGIC TILT WINCH POST ASSEMBLY ~ PO1535 TYPE: STANDARD WINCH POST W/ SEAT & STOP SIZE: 3" x 3" x 30" FITS: 2" TO 3" WIDE TONGUE BOW ROLLER: 4" WITH BELLS TUBE LENGTH: 30" MOUNT PLATE: 4-HOLE WITH 1/2" HOLES VERTICAL HEIGHT TO ROLLER CENTER: 18" TO 33" SLOPE: 20-DEGREES FROM VERTICAL (APPROX) MATERIAL: GALVANIZED NOTES: USES PO2161 WINCH POST, PO2170-1 WINCH SEAT, PO6294 ROLLER DOES NOT INCLUDE MOUNTING HARDWARE OR WINCH

PO1537 ~ WINCH POST ASSEMBLY 30" (STEEP) STANDARD-DUTY

REPRESENTATION PHOTO MAGIC TILT STEEP ANGLE WINCH POST ASSEMBLY ~ PO1537 TYPE: WINCH POST W/ SEAT & STOP SIZE: 3" x 3" x 30" FITS: 2" TO 3" WIDE TONGUE BOW ROLLER: 4" WITH BELLS TUBE LENGTH: 30" VERTICAL HEIGHT TO ROLLER CENTER: 20" TO 32" SLOPE: 45-DEGREES FROM VERTICAL (APPROX) MATERIAL: GALVANIZED NOTES: USES PO1485 WINCH POST, PO2170-1 WINCH SEAT, PO6294 ROLLER DOES NOT INCLUDE MOUNTING HARDWARE OR WINCH

PO1528 ~ WINCH POST ASSEMBLY 24" STANDARD-DUTY

REPRESENTATION PHOTO MAGIC TILT WINCH POST ASSEMBLY ~ PO1528 TYPE: STANDARD-DUTY WINCH POST ASSEMBLY SIZE: 3" x 3" x 24" FITS: 2" TO 3" WIDE TONGUE BOW ROLLER: 4" WITH BELLS TUBE LENGTH: 24" VERTICAL HEIGHT TO ROLLER CENTER: 17-1/2" TO 29" SLOPE: 30-DEGREES FROM VERTICAL (APPROX) MATERIAL: GALVANIZED NOTES: USES PO2166 WINCH POST, PO2170-1 WINCH SEAT, PO6294 BOW ROLLER DOES NOT INCLUDE MOUNTING HARDWARE OR WINCH

PK1000 ~ 1-AXLE MOUNT KIT 1-EYE 1-1/2" AXLE GALVANIZED

REPRESENTATION PHOTO MAGIC TILT SINGLE AXLE MOUNT KIT ~ PK1000 Provides all necessary hardware to mount single-eye springs on one 1-1/2" square axle. MATERIAL: GALVANIZED SPRING TYPE: SINGLE-EYE AXLE: 1-1/2" x 1-1/2" FOR CORRECT U-BOLT, SELECT NUMBER OF SPRING LEAVES IN DROP-DOWN INCLUDES: 2 x PK1200 3-HOLE PLATES GALVANIZED 2 x CAPSCREW 1/2" x 3-1/2" GR 5 PLATED 2 x NUT NYLOC 1/2-13 PLATED 4 x NUT HEX 1/2-13 GALVANIZED 4 x WASHER FLAT 1/2" GALVANIZED 4 x WASHER LOCK 1/2" GALVANIZED 2 x U-BOLT 1/2" x 2-3/4" x SELECT GALVANIZED

PK1050 ~ 1-AXLE MOUNT KIT 1-EYE 2x2 AXLE GALVANIZED

REPRESENTATION PHOTO MAGIC TILT SINGLE AXLE MOUNT KIT ~ PK1050 PROVIDES ALL NECESSARY HARDWARE TO MOUNT SINGLE-EYE SPRINGS ON ONE 2" SQUARE AXLE MATERIAL: GALVANIZED SPRING TYPE: SINGLE-EYE AXLE: 2" x 2" FOR CORRECT U-BOLT, SELECT NUMBER OF SPRING LEAVES IN DROP-DOWN 3, 4, 5, 6 INCLUDES: 2 x PK1250 5-HOLE PLATES GALV 2 x CAPSCREW 1/2" x 3-1/2" GR 5 PLATED 2 x NUT NYLOCK 1/2-13 PLATED 8 x NUT HEX 1/2-13 GALV 8 x WASHER FLAT USS 1/2" GALV 8 x WASHER LOCK 1/2" GALV 4 x U-BOLT 1/2" x 2-1/16" x SELECT GALV

PK1050-1 ~ 1-AXLE MOUNT KIT 1-EYE 2x3 AXLE GALVANIZED

REPRESENTATION PHOTO MAGIC TILT SINGLE AXLE MOUNT KIT ~ PK1050-1 PROVIDES ALL NECESSARY HARDWARE TO MOUNT SINGLE-EYE SPRINGS ON ONE 2" x 3" AXLE MATERIAL: GALVANIZED SPRING TYPE: SINGLE-EYE AXLE: 2" x 3" FOR CORRECT U-BOLT, SELECT NUMBER OF SPRING LEAVES IN DROP-DOWN 3, 4, 5, 6 INCLUDES: 2 x PK1250 5-HOLE PLATES GALV 2 x CAPSCREW 1/2" x 3-1/2" GR 5 PLATED 2 x NUT NYLOCK 1/2-13 PLATED 8 x NUT HEX 1/2-13 GALV 8 x WASHER FLAT USS 1/2" GALV 8 x WASHER LOCK 1/2" GALV 4 x U-BOLT 1/2" x 2-1/16" x SELECT GALV

PK1100 ~ 1-AXLE MOUNT KIT 2-EYE 2x2 AXLE GALVANIZED

REPRESENTATION PHOTO MAGIC TILT SINGLE AXLE MOUNT KIT ~ PK1100 Provides all necessary hardware to mount double-eye springs on one 2" square axle. MATERIAL: GALVANIZED AXLE: 2" x 2" AXLE SPRING TYPE: DOUBLE-EYE FOR CORRECT U-BOLT, SELECT NUMBER OF SPRING LEAVES IN DROP-DOWN 3, 4, 5, 6 INCLUDES: 2 x PK1250 5-HOLE PLATES GALV 4 x PK1300 2-HOLE SHACKLE PLATE GALV 2 x SPACER DOUBLE EYE SPRING 1-3/4" ALUM 6 x CAPSCREW 1/2" x 3-1/2" GR 5 PLATED 6 x NUT NYLOCK 1/2-13 PLATED 8 x NUT HEX 1/2-13 GALV 12 x WASHER FLAT USS 1/2" GALV 8 x WASHER LOCK 1/2" GALV 4 x U-BOLT 1/2" x 2-1/16" x SELECT GALV

PK1100-1 ~ 1-AXLE MOUNT KIT 2-EYE 2x3 AXLE GALVANIZED

REPRESENTATION PHOTO MAGIC TILT SINGLE AXLE MOUNT KIT ~ PK1100-1 Provides all necessary hardware to mount double-eye springs on one 2" x 3" square axle. MATERIAL: GALVANIZED AXLE: 2" x 3" SPRING TYPE: DOUBLE-EYE FOR CORRECT U-BOLT, SELECT NUMBER OF SPRING LEAVES IN DROP-DOWN 3, 4, 5, 6 INCLUDES: 2 x PK1250 5-HOLE PLATE GALV 4 x PK1300 2-HOLE SHACKLE PLATE GALV 2 x SPACER D-EYE SPRING 1-3/4" ALUM 6 x GRADE-5 BOLT (1/2" x 3-1/2") PLATED 6 x 1/2" NYLOCK NUT PLATED 8 x 1/2" HEX NUT GALV 12 x 1/2" FLAT WASHER GALV 8 x 1/2" LOCK WASHER GALV 4 x SQUARE U-BOLT 1/2" x 2-1/16" x SELECT GALV

PK1152 ~ 2-AXLE MOUNT KIT 2-EYE 2x3 AXLE GALVANIZED

REPRESENTATION PHOTO MAGIC TILT TANDEM AXLE MOUNT KIT ~ PK1152 Provides all necessary hardware to mount double-eye springs on two 2" x 3" axles. MATERIAL: GALVANIZED SPRING TYPE: DOUBLE-EYE AXLE: 2" x 3" FOR CORRECT U-BOLT, SELECT NUMBER OF SPRING LEAVES IN DROP-DOWN 3, 4, 5, 6 INCLUDES: 4 x PK1250 5-HOLE PLATES GALV 8 x PK1300 2-HOLE SHACKLE PLATE GALV 12 x CAPSCREW 1/2" x 3-1/2" GR 5 PLATED 2 x CAPSCREW 1/2" x 4" GR 5 PLATED 14 x NUT NYLOCK 1/2-13 PLATED 16 x NUT HEX 1/2-13 GALV 28 x WASHER FLAT USS 1/2" GALV 16 x WASHER LOCK 1/2" GALV 8 x U-BOLT 1/2" x 2-1/16" x SELECT GALV

PK1150 ~ 2-AXLE MOUNT KIT 2-EYE 2x2 AXLE GALVANIZED

REPRESENTATION PHOTO MAGIC TILT TANDEM AXLE MOUNT KIT ~ PK1150 Provides all necessary hardware to mount double-eye springs on two 2" square axles. MATERIAL: GALVANIZED SPRING TYPE DOUBLE-EYE AXLE: 2" x 2" FOR CORRECT U-BOLT, SELECT NUMBER OF SPRING LEAVES IN DROP-DOWN 3, 4, 5, 6 INCLUDES: 4 x PK1250 5-HOLE PLATES GALV 8 x PK1300 2-HOLE SHACKLE PLATE GALV 12 x CAPSCREW 1/2" x 3-1/2" GR 5 PLATED 2 x CAPSCREW 1/2" x 4" GR 5 PLATED 14 x NUT NYLOCK 1/2-13 PLATED 16 x NUT HEX 1/2-13 GALV 28 x WASHER FLAT USS 1/2" GALV 16 x WASHER LOCK 1/2" GALV 8 x U-BOLT 1/2" x 2-1/16" x SELECT GALV

PK1150-SS ~ 2-AXLE MOUNT KIT 2-EYE 2x2 AXLE STAINLESS / GALV

REPRESENTATION PHOTO MAGIC TILT TANDEM AXLE MOUNT KIT ~ PK1150-SS Provides all necessary hardware to mount double-eye springs on two 2" square axles. MATERIAL: STAINLESS STEEL & GALVANIZED COMBINATION SPRING TYPE: DOUBLE-EYE AXLE: 2" x 2" FOR CORRECT U-BOLT, SELECT NUMBER OF SPRING LEAVES IN DROP-DOWN 3, 4, 5, 6 INCLUDES: 4 x PK1250 5-HOLE PLATES GALV 8 x PK1300 2-HOLE SHACKLE PLATE GALV 12 x CAPSCREW 1/2" x 3-1/2" GR 5 PLATED 2 x CAPSCREW 1/2" x 4" GR 5 PLATED 14 x NUT NYLOCK 1/2-13 PLATED 16 x NUT HEX 1/2-13 STAINLESS 28 x WASHER FLAT USS 1/2" GALV 16 x WASHER LOCK 1/2" STAINLESS 8 x U-BOLT 1/2" x 2-1/16" x SELECT STAINLESS

PK1152-SS ~ 2-AXLE MOUNT KIT 2-EYE 2x3 AXLE STAINLESS / GALV

REPRESENTATION PHOTO MAGIC TILT TANDEM AXLE MOUNT KIT ~ PK1152-SS Provides all necessary hardware to mount double-eye springs on two 2" x 3" square axles MATERIAL: STAINLESS STEEL & GALVANIZED COMBINATION SPRING TYPE: DOUBLE-EYE AXLE: 2" x 3" FOR CORRECT U-BOLT, SELECT NUMBER OF SPRING LEAVES IN DROP-DOWN 3, 4, 5, 6 INCLUDES: 4 x PK1250 x 5-HOLE PLATES GALV 8 x PK1300 x 2-HOLE PLATES GALV 12 x PY0260 x CAPSCREW 1/2 x 3-1/2 GR5 PLATED 2 x PY0265 x CAPSCREW 1/2 x 4 GR5 PLATED 16 x PY1025 x LOCK WASHER 1/2 STAINLESS 14 x PY1315 x NUT NYLOCK 1/2-13 PLATED 28 x PY1515 x FLAT WASHER USS 1/2 GALV 16 x PY1785 x HEX NUT 1/2" STAINLESS 16 x PY1905 x FLAT WASHER 1/2" STAINLESS 8 x PY2538 x U-BOLT SS 1/2 x 2-1/16 x SELECT GALV

PH2155 ~ HUB CONVERSION KIT 1-3/4" SPINDLES (NON-UFP HUBS to UFP AXLES)

REPRESENTATION PHOTO MAGIC TILT HUB CONVERSION KIT ~ PH2155 APPLICATION: ADAPTS 6 & 8-LUG HUBS FROM NON-UFP AXLES TO UFP AXLES SPINDLE: 1-3/4" INCLUDES: ENOUGH HARDWARE TO CONVERT TWO HUBS TO ALL UFP-STYLE 1-1/4" x 1-3/4" SPINDLES 2 x PE2101 SEAL 1-3/4" UFP (21333) 2 x PH1980 SPINDLE NUT 13/16" UFP 2 x PH2012 COTTER PIN 1/8" x 1-1/4" UFP 2 x PH2066 3/4" AXLE D WASHER 3/16" UFP 2 x PH2108 SPINDLE NUT RETAINER UFP

PH2150 ~ HUB CONVERSION KIT 1-3/8" SPINDLES (NON-UFP HUBS to UFP AXLES)

REPRESENTATION PHOTO MAGIC TILT HUB CONVERSION KIT ~ PH2150 APPLICATION: ADAPTS 5-LUG 3.5K HUBS FROM NON-UFP AXLES TO UFP AXLES SPINDLE SIZE: 1-3/8" INCLUDES: ENOUGH HARDWARE TO CONVERT TWO HUBS TO 3.5K UFP-STYLE SPINDLES 2 x PE2055 SEAL 1-3/8" UFP (168-257) 2 x PH1980 SPINDLE NUT 13/16" UFP 2 x PH2012 COTTER PIN 1/8" x 1-1/4" UFP 2 x PH2065 3/4" AXLE D WASHER 3/32" UFP 2 x PH2108 SPINDLE NUT RETAINER UFP

PH2145 ~ HUB CONVERSION KIT 1-1/16" SPINDLES (NON-UFP HUBS to UFP AXLES)

REPRESENTATION PHOTO MAGIC TILT HUB CONVERSION KIT ~ PH2145 APPLICATION: ADAPTS 4 & 5-LUG HUBS FROM NON-UFP AXLES TO UFP AXLES SPINDLE SIZE: 1-1/16" INCLUDES: ENOUGH HARDWARE TO CONVERT TWO HUBS TO 1-1/16" UFP-STYLE SPINDLES 2 x PE2010 SEAL 1-1/16" UFP (125-198) 2 x PH1980 SPINDLE NUT 13/16" UFP 2 x PH2012 COTTER PIN 1/8" x 1-1/4" UFP 2 x PH2065 3/4" AXLE D WASHER 3/32" UFP 2 x PH2108 SPINDLE NUT RETAINER UFP

PE1151 ~ BEARING KIT 1-1/16" x 1-3/8" (UFP)

Magic Tilt Bearing Kit ~ PE1151 Type: Bearing Kit Spindle Size: 1-1/16" x 1-3/8" Brand: UFP Good to know: Use with rotor/hub combinations PG2026-1 , PG2026-2, PG2024 Inner Race (PE1749) Used Exclusively In 5-Lug UFP 1-Piece Disk Brake Rotors Kit Contains: 1 x PE1400 Bearing 1-1/16" (44649) 1 x PE1450 Bearing 1-3/8" (68149) 1 x PE1710 Race 1" Or 1-1/16" (44610) 1 x PE1749 Race 1-3/8" UFP (68110) 1 x PE2055 Seal 1-3/8" UFP (257-168) 1 x PH2012 Cotter Pin 1/8" x 1-1/4" UFP

PE1152 ~ BEARING KIT 1-1/16" x 1-3/8" (UFP)

REPRESENTATION PHOTO MAGIC TILT BEARING KIT ~ PE1152 TYPE: BEARING KIT SPINDLE SIZE: 1-1/16" x 1-3/8" FITS: 5-LUG HUBS BRAND: UFP NOTES: USE WITH HUBS PD1750 , PD1760 INCLUDES: 1 x PE1400 BEARING 1-1/16" (44649) 1 x PE1450 BEARING 1-3/8" (68149) 1 x PE1710 RACE 1" OR 1-1/16" (44610) 1 x PE1750 RACE 1-3/8" UCF (68111) 1 x PE2055 SEAL 1-3/8" UFP (257-168) 1 x PH2012 COTTER PIN 1/8" x 1-1/4" UFP

PE1200 ~ BEARING KIT 1-1/4" x 1-3/4" SELECT 6-LUG UFP HUBS/ROTORS

REPRESENTATION PHOTO MAGIC TILT BEARING KIT ~ PE1200 TYPE: BEARING KIT FITS: 6-LUG HUB SPINDLE SIZE: 1-1/4" x 1-3/4" BRAND: DEXTER / UFP APPLICATION: - USE ROTORS PG2027-1 & PG2027-2 PRIOR TO 3/24 WITH 2.328" DUST CAPS - 5,200-POUND UFP AXLES (2"x3" SPRING AND 3-1/2" TORSION) USING SEAL WITH 2.13" INSIDE DIAMETER INCLUDES: 1 x PE1500 1-1/4" BEARING (67048) 1 x PE1600 1-3/4" BEARING (25580) 1 x PE1800 RACE (67010) 1 x PE1900 RACE (25520) 1 x PE2101 SEAL (21333) 1 x PH2012 1/8" x 1-1/4" COTTER PIN

PE1201 ~ BEARING KIT 1-1/4" x 1-3/4" SELECT 6-LUG UFP HUBS/ROTORS

REPRESENTATION PHOTO MAGIC TILT BEARING KIT ~ PE1201 TYPE: BEARING KIT FITS: 6-LUG HUB SPINDLE SIZE: 1-1/4" x 1-3/4" BRAND: DEXTER / UFP APPLICATION: - USE WITH HUB PD1857 , ROTORS PG2027-1 & PG2027-2 (AFTER 3/24 WITH 2.44" DUST CAPS) ON UFP AXLES - 5,200-POUND UFP AXLES (2"x3" SPRING AND 3-1/2" TORSION) USING 2.13" INSIDE DIAMETER SEALS - SELECT 6-LUG NON-UFP HUBS (D-MAX, KODIAK, DRUM) ON UFP AXLES USING 2.13" INSIDE DIAMETER SEALS INCLUDES: 1 x PE1550 1-1/4" BEARING (15123) 1 x PE1600 1-3/4" BEARING (25580) 1 x PE1850 RACE (15245) 1 x PE1900 RACE (25520) 1 x PE2101 SEAL (21333) 1 x PH2012 1/8" x 1-1/4" COTTER PIN

PE1250 ~ BEARING KIT 1-1/4" x 1-3/4" SELECT 6-LUG NON-UFP HUBS/ROTORS

REPRESENTATION PHOTO MAGIC TILT BEARING KIT ~ PE1250 TYPE: HD BEARING KIT SPINDLE SIZE: 1-1/4" x 1-3/4" BRAND: NON-UFP APPLICATION: - USE WITH HUB PD1857 AND ROTORS PG2027-1 & PG2027-2 (AFTER 3/24 WITH 2.44" DUST CAPS) ON NON-UFP AXLES - 5,200-POUND NON-UFP AXLES (2"x3" SPRING AND 3-1/2" TORSION) USING SEAL WITH 2.23" INSIDE DIAMETER - SELECT 6-LUG NON-UFP HUBS (D-MAX, KODIAK, DRUM) ON NON-UFP AXLES ON AXLES USING A SEAL WITH 2.23" INSIDE DIAMETER INCLUDES: 1 x PE1550 BEARING HD 1-1/4" (15123) 1 x PE1600 BEARING 1-3/4" (25580) 1 x PE1850 RACE HD 1-1/4" (15245) 1 x PE1900 RACE 1-3/4" (25520) 1 x PE2100 SEAL 1-3/4" (22333) 1 x PH2014 COTTER PIN 1/8" x 1-3/4" PLATED

Bearing Kits & Conversion Kits - HD 1-3/4"X1-1/4" UFP

Type: BEARING KIT-HD 1-3/4"X1-1/4" Kit Includes: Part Description Qty PE1550 BEARING HD 1-1/4" [15123] 1 PE1600 BEARING 1-3/4" [25580] 1 PE1850 RACE-HD 1-1/4" [15245] 1 PE1900 RACE 1-3/4" [25520] 1 PE2101 SEAL 1-3/4"[UFP][21333] 1 PH2012 COTTER PIN 1/8"X1-1/4"[UFP AXLE] 1

PE1255 ~ BEARING KIT 1-1/4" x 1-3/4" 8-LUG NON-UFP HUBS

REPRESENTATION PHOTO MAGIC TILT BEARING KIT ~ PE1255 TYPE: BEARING KIT SPINDLE SIZE: 1-1/4" x 1-3/4" FITS: 8-LUG HUBS BRAND: UFP NOTES: USE WITH 8-LUG HUB PD1860 OR ROTORS PG2028-1 AND PG2028-2 ON NON-UFP AXLES INCLUDES: 1 x PE1555 BEARING 1-1/4" (14125A) 1 x PE1600 BEARING 1-3/4" (25580) 1 x PE1855 RACE 1-1/4" 8-LUG (14276) 1 x PE1900 RACE 1-3/4" (25520) 1 x PE2100 SEAL 1-3/4" (22333) 1 x PH2014 COTTER PIN 1/8" x 1-3/4" PLATED

PE1256 ~ BEARING KIT 1-1/4" x 1-3/4" 8-LUG UFP HUBS

REPRESENTATION PHOTO MAGIC TILT BEARING KIT ~ PE1256 TYPE: BEARING KIT SPINDLE SIZE: 1-1/4" x 1-3/4" FITS: 8-LUG HUBS BRAND: UFP NOTES: USE WITH 8-LUG HUB PD1860 OR ROTORS PG2028-1 AND PG2028-2 ON UFP AXLES INCLUDES: 1 x PE1555 BEARING 1-1/4" (14125A) 1 x PE1600 BEARING 1-3/4" (25580) 1 x PE1855 RACE 1-1/4" 8-LUG (14276) 1 x PE1900 RACE 1-3/4" (25520) 1 x PE2101 UFP SEAL 1-3/4" (21333) 1 x PH2012 x COTTER PIN 1/8" x 1-1/4" (UFP AXLE)

PE1100 ~ BEARING KIT 1-1/16" x 1-1/16" (NON-UFP)

REPRESENTATION PHOTO MAGIC TILT BEARING KIT ~ PE1100 TYPE: BEARING KIT SPINDLE SIZE: 1-1/16" x 1-1/16" NOTES: USE WITH HUBS PD1360 , PD1670 , PD1660 INCLUDES: 2 x PE1400 BEARING 1-1/16" (44649) 2 x PE1710 RACE 1" OR 1-1/16" (44610) 1 x PE2010 SEAL 1-1/16" (198-125) 1 x PH2014 COTTER PIN 1/8" x 1-3/4" PLATED

PE1101 ~ BEARING KIT 1-1/16 x 1-1/16" (UFP)

REPRESENTATION PHOTO MAGIC TILT BEARING KIT ~ PE1101 TYPE: BEARING KIT SPINDLE SIZE: 1-1/16" BRAND: UFP NOTES: USE WITH HUBS PD1670 , PD1660 INCLUDES: 2 x PE1400 BEARING 1-1/16" (44649) 2 x PE1710 RACE 1" OR 1-1/16" (44610) 1 x PE2015 SEAL 1-1/16" UFP (198-138) 1 x PH2012 COTTER PIN 1/8" x 1-1/4" UFP PLATED

PE1150 ~ BEARING KIT 1-1/16" x 1-3/8" (NON-UFP)

REPRESENTATION PHOTO MAGIC TILT BEARING KIT ~ PE1150 TYPE: BEARING KIT SPINDLE SIZE: 1-1/16" x 1-3/8" BRAND: UCF NOTES: USE WITH HUBS PD1750 , PD1760 INCLUDES: 1 x PE1400 BEARING 1-1/16" (44649) 1 x PE1450 BEARING 1-3/8" (68149) 1 x PE1710 RACE 1" OR 1-1/16" (44610) 1 x PE1750 RACE 1-3/8" UCF (68111) 1 x PE2050 SEAL 1-3/8" (255-171) 1 x PH2014 COTTER PIN 1/8" x 1-3/4" PLATED

PE1500 ~ BEARING 1-1/4" (67048)

REPRESENTATION PHOTO MAGIC TILT BEARING ~ PE1500 COMMERCIAL NUMBER: 67048 BEARING SIZE: 1-1/4" INSIDE DIAMETER: 1.250" SOLD INDIVIDUALLY

PE1550 ~ BEARING 1-1/4" (15123)

REPRESENTATION PHOTO MAGIC TILT H.D. BEARING ~ PE1550 COMMERCIAL NUMBER: 15123 BEARING SIZE: 1-1/4" INSIDE DIAMETER: 1.250 SOLD INDIVIDUALLY

PE1555 ~ BEARING 1-1/4" (14125A)

REPRESENTATION PHOTO MAGIC TILT BEARING ~ PE1555 COMMERCIAL NUMBER: 14125A BEARING SIZE: 1-1/4" INSIDE DIAMETER: 1.250" SOLD INDIVIDUALLY NOTES: FOR 8 LUG HUBS

PE1600 ~ BEARING 1-3/4" (25580)

REPRESENTATION PHOTO MAGIC TILT BEARING ~ PE1600 COMMERCIAL NUMBER: 25580 BEARING SIZE: 1-3/4" INSIDE DIAMETER: 1.750" SOLD INDIVIDUALLY

PE1400 ~ BEARING 1-1/16" (44649)

REPRESENTATION PHOTO MAGIC TILT BEARING ~ PE1400 COMMERCIAL NUMBER: 44649 SIZE: 1-1/16" INSIDE DIAMETER: 1.063" SOLD INDIVIDUALLY

PE1450 ~ BEARING 1-3/8" (68149)

REPRESENTATION PHOTO MAGIC TILT BEARING ~ PE1450 COMMERCIAL NUMBER: 68149 SPINDLE: 1-3/8" INSIDE DIAMETER: 1.378" SOLD INDIVIDUALLY

PV2280-3 ~ BOW REST GUIDE PAD ASSEMBLY 40"

REPRESENTATION PHOTO MAGIC TILT GUIDE PAD ASSEMBLY ~ PV2280-3 TYPE: BOW REST GUIDE MATERIAL: GALVANIZED / PVC WIDTH: 40" TUBE: 2" x 2" HEIGHT ABOVE CROSSMEMBER: MINIMUM: 3" MAXIMUM: 7" NOTES: INCLUDES PP2245 CENTER RUB STRIP MOUNTING HARDWARE (NOT INCLUDED): EITHER PS2652 CLAMP-OVER OR TOP HAT CLAMPS OR ASSEMBLIES

PV2282-3 ~ BOW REST ROLLER GUIDE ASSEMBLY

REPRESENTATION PHOTO MAGIC TILT ROLLER GUIDE ASSEMBLY ~ PV2282-3 TYPE: BOW REST ROLLER GUIDE ASSEMBLY ROLLERS: 10" ORANGE POLY MATERIAL: GALVANIZED / PVC TUBE: 2" x 2" WIDTH: 40" HEIGHT ABOVE CROSSMEMBER: MINIMUM: 5-1/2" MAXIMUM: 9-1/2" NOTES: REQUIRES 2" CLAMP-ON ASSEMBLY (NOT INCLUDED)

10" Disc Rotors - PG2026-DISC ROTOR 10" 5LUG [UFP]

SPECS SKU: PG2026-1 Diameter: 10" Finish: Plated Bolt Pattern: 5Lx4.5" Brand: UFP

Clamp-On Sockets - ADJ. UPRIGHT BOW REST CLAMP ON [ALUM] 2" TUBE

SPECS SKU: PS2653-A Type: ADJ. UPRIGHT BOW REST CLAMP ON [ALUM] 2" TUBE Fits: 2"X2" Tube Material: Alum

PS2653-1 ~ CLAMP-ON TOP HAT 1-1/2" GALVANIZED

REPRESENTATION PHOTO MAGIC TILT CLAMP-ON SOCKET ~ PS2653-1 TYPE: ADJUSTABLE CLAMP-ON SOCKET FITS: 1-1/2" SQUARE TUBE LENGTH: 4-5/8" WIDTH: 3-7/8" HEIGHT: 1-1/2" HOLE SIZE: 3/8" MATERIAL: GALVANIZED

Clamp-On Sockets - ADJ.UPRIGHT BOW REST CLAMP ON [GALV]

SPECS SKU: PS2653 Type: ADJ.UPRIGHT BOW REST CLAMP ON [GALV] Fits : 2" Tube Material: Zinc Plated

PS2649 ~ CLAMP-ON SOCKET 3" x 1-1/2" TUBE

REPRESENTATION PHOTO MAGIC TILT CLAMP-ON SOCKET ~ PS2649 CROSSMEMBER SIZE: 3" x 3" VERTICAL TUBE SIZE: 1/1/2" x 1-1/2" MATERIAL: GALVANIZED DESIGNED TO MOUNT HORIZONTAL BUNKS TO 3" x 3" CROSSMEMBERS REPLACEMENT SOCKET FOR THE PS2640 ASSEMBLY NOTES: MOUNTS OVER CROSSMEMBER WITH 3/8" x 4-1/2" GALVANIZED BOLT (NOT INCLUDED) REQUIRES ONE EACH PS2210 NUT RETAINER AND PS2150 SET SCREW (NOT INCLUDED) USE WITH PRE-CUT 1-1/2" TUBE BRACKETS OR BULK TUBE BRACKETS (NOT INCLUDED)

PS2652 ~ CLAMP-ON SOCKET 3" x 2" TUBE

REPRESENTATION PHOTO MAGIC TILT CLAMP-ON SOCKET ~ PS2652 CROSSMEMBER SIZE: 3" x 3" VERTICAL TUBE SIZE: 2" x 2" MATERIAL: GALVANIZED NOTES: USED TO MOUNT ANY BOW REST OR BUNK GUIDE USING 2" x 2" VERTICAL TUBING REQUIRES TWO PS2150 SET SCREWS (NOT INCLUDED) MOUNTS TO 3" x 3" CROSSMEMBERS WITH TWO 3/8" x 4-1/2" GALVANIZED BOLTS (NOT INCLUDED) USE WITH PU4040 2" TUBE (NOT INCLUDED)

Clamp-On Sockets - CLAMP ON H.W.KIT FOR 2X2 TUBE

SPECS SKU: PY9031 Type: CLAMP ON H.W.KIT FOR 2X2 TUBE Fits: 2"X2" Tube Only Material: Zinc Plated Contains: 2 Ubolts 1/2X3-1/16X4-5/16 SQ galv/ W nuts and washers.

Clamp-On Sockets - 4"CLAMP-ON SKT 1-1/2"SQR.TUBE

SPECS SKU: PS2401 Type: 4"CLAMP-ON SKT 1-1/2"SQR.TUBE Fits: 1-1/2" Square Tube Material: Zinc Plated Width4"

PK1250 ~ 5-HOLE PLATE GALVANIZED

REPRESENTATION PHOTO MAGIC TILT 5-HOLE PLATE ~ PK1250 SIZE: 3-1/2" x 3-3/4" THICKNESS: 1/4" HOLE CENTERS: 2-1/4" AND 2-9/16" HOLE DIAMETER: 0.55" MATERIAL: GALVANIZED

PK1320 ~ 1-HOLE SLOT PLATE GALVANIZED

REPRESENTATION PHOTO MAGIC TILT 1-HOLE SLOT PLATE ~ PK1320 LENGTH: 5-1/4" WIDTH: 1-1/2" HOLE SIZE: 1/2" HOLE CL: 3-3/4" THICKNESS: 1/4" MATERIAL: GALVANIZED

PK1205 ~ 3-HOLE BUNK PLATE GALVANIZED

REPRESENTATION PHOTO MAGIC TILT 3-HOLE BUNK PLATE ~ PK1205 HOLE SIZE: 1/2" WIDTH: 1-1/2" LENGTH: 5-1/4" THICKNESS: 1/4" OUTSIDE HOLE CL: 3-3/4" MATERIAL: GALVANIZED

PK1200 ~ 3-HOLE PLATE GALVANIZED

REPRESENTATION PHOTO MAGIC TILT 3-HOLE PLATE ~ PK1200 HOLE SIZE: 1/2" WIDTH: 1-1/2" LENGTH: 4-1/2" OUTSIDE HOLE CL: 3" THICKNESS: 1/4" MATERIAL: GALVANIZED

Galvanized Plates - 2-HOLE PLT.[PWC-4 BACKING PLT.]

SPECS SKU: PK1310 Type: 2-HOLE PLT.[PWC-4 BACKING PLT.] Material: Galv Width: 1-1/2" Length: 3-1/4" Hole Size: 3/8"

PK1300 ~ 2-HOLE SHACKLE PLATE GALVANIZED

REPRESENTATION PHOTO MAGIC TILT 2-HOLE SHACKLE PLATE ~ PK1300 HOLE SIZE: 1/2" HOLE SPACING: 2-1/2" WIDTH: 1-1/2" LENGTH: 3-3/4" THICKNESS: 1/4" MATERIAL: GALVANIZED

PV0980-PIN ~ TONGUE JACK LOCKING PIN 1/2 in x 3-1/2 in

REPRESENTATION PHOTO MAGIC TILT LOCKING PIN ~ PV0980-PIN TYPE: SQUARE TUBE JACK LOCKING PIN LENGTH: 3-1/2" TO HOLE DIAMETER: 1/2" NOTES: REPLACEMENT PIN FOR PV0976 JACK AND MOST DROP-LEG JACKS

Tongue Jacks - PV1155- SWIVEL MOUNT 1000# DL

SPECS SKU: PV1155 Type: TONGUE JACK - SWIVEL MOUNT 1000# DL Fits: 3" x 5"/ 3" x 4" trailer tongue Finish: Zinc Capacity: 1,000 lbs Brand: DL

PV0965 ~ TONGUE JACK DUAL SWIVEL 1500 LBS.

REPRESENTATION PHOTO MAGIC TILT TONGUE JACK ~ PV0965 TYPE: SWIVEL MOUNT TONGUE JACK W/ DUAL WHEEL FITS: 3" x 3", 3" x 4", 3" x 5" TONGUES FINISH: ZINC TUFFPLATE FINISH CAPACITY: 1500 LBS. WHEEL DIAMETER: 6" BRAND: DUTTON LAINSON NOTES: INCLUDES MOUNTING HARDWARE REPLACEMENT WHEEL 2 x PV3150

PV0905 ~ FIXED TONGUE JACK 1000 LBS.

Magic Tilt Tongue Jack ~ PV0905 Type: Side-mount fixed tongue jack Fits: 3" X 3" / 3" x 4" 3" x 5" Tongue Capacity: 1000 LBS Finish: Zinc Plated Wheel Size: 6" Brand: Dutton Lainson Good to know: Includes Mounting Hardware Does Not Pivot Replacement Wheel PV3150

PV0976 ~ TONGUE JACK SQUARE TUBE 2500 LBS.

REPRESENTATION PHOTO MAGIC TILT TONGUE JACK ~ PV0976 TYPE: TONGUE JACK SQUARE TUBE FITS: 3x3, 3x4, 3x5 TONGUE FINISH: ZINC PLATED CAPACITY: 2500 LBS BRAND: DUTTON LAINSON NOTES: INCLUDES MOUNTING HARDWARE REPLACEMENT DROP-LEG INSERT PV0980-LEG REPLACEMENT PIN PV0980-PIN

Pro I-Beam Jack Mounts - PRO 4-1/2" I- BEAM JACK MOUNT ASSY

SPECS SKU: PV1020 Type: PRO 4-1/2" I- BEAM JACK MOUNT ASSEM Size: 4-1/2" Fits: 4-1/2" I-Beam Frame

Pro I-Beam Jack Mounts - PRO 5-1/2" I-BEAM JACK MOUNT ASSY

SPECS SKU: PV1021 Type: PRO 5-1/2" I-BEAM JACK MOUNT ASSY Size : 5-1/2" Fits: 5-1/2" I-Beam Frame

PV3150 ~ TONGUE JACK WHEEL

REPRESENTATION PHOTO MAGIC TILT TONGUE JACK WHEEL ~ PV3150 TYPE: TONGUE JACK WHEEL COLOR: BLACK DIAMETER: 6" HOLE SIZE: 1/2" NOTES: USES PY0260 BOLT AND PY1315 NUT (NOT INCLUDED)

COUPLERS - COUPLER 2X3 3500#

SPECS SKU:PU2030 Type: COUPLER 2X3 3500# Size: 2"x3" Ball Size: 2" Capacity: 3500Lbs

COUPLERS - COUPLER 2X2 3500#

SPECS SKU:PU2010 Type: COUPLER 2X2 3500# Size: 2"x2" Material: Zinc Plated Capacity: 3500Lbs

COUPLERS - COUPLER 2X3 5000#

SPECS SKU: PU2040 Type: COUPLER 2X3 5000# Size: 2"X3" Ball Size: 2" Capacity: 5000Lbs

PU2258 ~ COUPLER 2-5/16" BALL - 16,000 LBS. (DEMCO)

REPRESENTATION PHOTO MAGIC TILT COUPLER ~ PU2258 TYPE: COUPLER BALL SIZE: 2-5/16" CAPACITY: 16,000 LBS FITS: 3" WIDE TONGUES MOUNT HOLE SIZE: 1/2" MATERIAL: ZINC PLATED BRAND: DEMCO NOTES: RAISE LATCH, SEAT COUPLER ON BALL & LATCH AUTOMATICALLY SNAPS TO LOCKED POSITION MOUNTING HARDWARE NOT INCLUDED

PU2270 ~ COUPLER ADJUSTABLE 2-5/16" - 20K (DEXTER / UFP)

REPRESENTATION PHOTO MAGIC TILT COUPLER ~ PU2270 TYPE: ADJUSTABLE COUPLER BALL SIZE: 2-5/16" CAPACITY: 20,000 LBS FITS: 3" WIDE TONGUE BRAND: DEXTER / UFP (K74-019-00) NOTES: USED ON LARGE TRAILERS UTILIZING ELECTRIC-OVER-HYDRAULIC BRAKES REPLACEMENT SAFETY PIN: PG4820 USE WITH (NOT INCLUDED): ONE PU2272 CHANNEL BRACKET TWO PY0285 5/8"x4-1/2" GRADE 8 BOLTS TWO PY1320 5/8" NYLOCK NUTS

PU2272 ~ COUPLER BRACKET ADJUSTABLE (DEXTER / UFP)

REPRESENTATION PHOTO MAGIC TILT COUPLER BRACKET ~ PU2272 TYPE: ADJUSTABLE WELD-ON COUPLER BRACKET WIDTH: 3-3/4" HEIGHT: 7-3/4" CAPACITY: 20,000 LBS MATERIAL: GALVANIZED BRAND: DEXTER / UFP (074-323-00) NOTES: USED ON LARGE TRAILERS UTILIZING ELECTRIC-OVER-HYDRAULIC BRAKES 4-HOLE, 3 POSITION ADJUSTMENT USE WITH (NOT INCLUDED): ONE PU2270 COUPLER TWO PY0285 5/8" x 4-1/2" GRADE 8 BOLTS TWO PY1320 5/8" NYLOCK NUTS

PL1180 ~ OPTRONICS STL16RB LED COMBINATION TAIL LIGHT RH >80"

REPRESENTATION PHOTO MAGIC TILT SUBMERSIBLE LED TAIL LIGHT ~ PL1180 TYPE: LED COLOR: RED WIDTH: 2-13/16" HEIGHT: 2-7/8" LENGTH: 8" SIDE: RIGHT HAND TRAILER WIDTH: ALL BRAND: OPTRONICS STL16RB RELATED PARTS (NOT INCLUDED) WIRE HARNESSES: 4-WAY , 5-WAY (FOR BRAKES) PL2311 BUTT CONNECTOR PL2944 WIRE TIE WITH ANCHOR CHASSIS CLIPS

PL1182 ~ OPTRONICS STL17RB LED COMBINATION TAIL LIGHT LH >80"

REPRESENTATION PHOTO MAGIC TILT SUBMERSIBLE LED TAIL LIGHT ~ PL1182 TYPE: LED COLOR: RED WIDTH: 2-13/16" HEIGHT: 2-7/8" LENGTH: 8" SIDE: LEFT HAND (WITH LICENSE PLATE LIGHT) TRAILER WIDTH: ALL BRAND: OPTRONICS STL17RB RELATED PARTS (NOT INCLUDED) WIRE HARNESSES: 4-WAY , 5-WAY (FOR BRAKES) PL2311 BUTT CONNECTOR PL2944 WIRE TIE WITH ANCHOR CHASSIS CLIPS

Tail Lights - PL1070-RECT COMB RH

SPECS SKU: PL1070 Type: RECTANGULAR COMB T/L >80 RH Width: 3" Height: 2-7/8" Length: 8" Side: Right

Tail Lights - PL1080-RECT COMB LH

SPECS SKU: PL1080 Type: RECTANGULAR COMB T/L >80 LH Width: 3" Height: 2-7/8" Length: 8" Side: Left

Tail Lights - PL0510-RECT T/L LH [MV]

SPECS SKU: PL0510 Type: RECT TAIL LIGHT LH [MV] Fits: MT Series Color: RED Width: 2-1/4" Height: 3-1/2" Length: 6" Side: LH

Tail Lights - PL0520-RECT T/L RH [MV]

SPECS SKU: PL0520 Type: RECT TAIL LIGHT RH [MV] Fits: MT Series Color: RED Width: 2-1/4" Height: 3-1/2" Length: 6" Side: RH

PL1100 ~ BULB SQUARE TAIL LIGHT LH <80"

REPRESENTATION PHOTO MAGIC TILT SUBMERSIBLE SQUARE TAIL LIGHT ~ PL1100 TYPE: BULB WIDTH: 2-7/8" SIDE: LEFT HAND (WITH LICENSE PLATE LIGHT) HEIGHT: 4-1/2" LENGTH: 5" TRAILER WIDTH: LESS THAN 80" BRAND: PETERSON OR JAMMY RELATED PARTS (NOT INCLUDED) WIRE HARNESSES: 4-WAY , 5-WAY (FOR BRAKES) PL2311 BUTT CONNECTOR PL2944 WIRE TIE WITH ANCHOR CHASSIS CLIPS

PL1150 ~ BULB SQUARE TAIL LIGHT RH <80"

REPRESENTATION PHOTO MAGIC TILT SUBMERSIBLE SQUARE TAIL LIGHT ~ PL1150 TYPE: BULB WIDTH: 2-7/8" SIDE: RIGHT HAND HEIGHT: 4-1/2" LENGTH: 5" TRAILER WIDTH: LESS THAN 80" BRAND: PETERSON OR JAMMY RELATED PARTS (NOT INCLUDED) WIRE HARNESSES: 4-WAY , 5-WAY (FOR BRAKES) PL2311 BUTT CONNECTOR PL2944 WIRE TIE WITH ANCHOR CHASSIS CLIPS

PL1112 ~ JAMMY J-71 LED COMBINATION TAIL LIGHT LH >80"

REPRESENTATION PHOTO MAGIC TILT SUBMERSIBLE LED TAIL LIGHT ~ PL1112 TYPE: LED WIDTH: 1-7/8" LENGTH: 6-1/8" HEIGTH: 3-5/8" SIDE: LEFT HAND (WITH LICENSE PLATE LIGHT) TRAILER WIDTH: ALL BRAND: JAMMY J-71 INCLUDES: MOUNTING HARDWARE 8" LEADS W/ GROUND RING TERMINAL RELATED PARTS (NOT INCLUDED) WIRE HARNESSES: 4-WAY , 5-WAY (FOR BRAKES) PL2311 BUTT CONNECTOR PL2944 WIRE TIE WITH ANCHOR CHASSIS CLIPS

PL1110 ~ JAMMY J-71 LED COMBINATION TAIL LIGHT RH >80"

REPRESENTATION PHOTO MAGIC TILT SUBMERSIBLE LED TAIL LIGHT ~ PL1110 TYPE: LED WIDTH: 1-7/8" LENGTH: 6-1/8" HEIGTH: 3-5/8" SIDE: RIGHT HAND TRAILER WIDTH: ALL BRAND: JAMMY J-71 INCLUDES: MOUNTING HARDWARE 8" LEADS W/ GROUNG RING TERMINAL RELATED PARTS (NOT INCLUDED) WIRE HARNESSES: 4-WAY , 5-WAY (FOR BRAKES) PL2311 BUTT CONNECTOR PL2944 WIRE TIE WITH ANCHOR CHASSIS CLIPS

5 Lug Hubs - PD1660-HUB W/RACE 1-1/16"X1-1/16" 5L

SPECS SKU: PD1660 Type: HUB W/RACE-CAST 1-1/16" 5L Bolt Pattern: 5LX4.5" Hubs: 5 Lug Spindle/Bearings: 1-1/16" X 1-1/16" Brand: UFP

5 Lug Hubs - PD1750-HUB W/RACE 5L

SPECS SKU: PD1750 Type: HUB W/RACE-CST 1-3/8X1-1/16 5L Bolt Pattern: 5LX4.5" Hubs: 5 Lug Spindle/Bearings: 1-3/8x1-1/16

PD1760 ~ 5-LUG HUB WITH RACE 1-1/16" x 1-3/8" GALVANIZED

REPRESENTATION PHOTO MAGIC TILT HUB W/ RACE ~ PD1760 TYPE: IDLER HUB SPINDLE: 1-3/8" x 1-1/16" BOLT PATTERN: 5 x 4.5" MATERIAL: GALVANIZED NOTES: INCLUDES RACES ALREADY INSTALLED NOT INCLUDED BEARING KIT PE1152 (UFP), PE1150 (NON-UFP) SPINDLE HARDWARE KIT: PH2125 (UFP), PH2160 (NON UFP) BEARING PROTECTOR PF1054 AND BRA PF1060

PD1670 ~ 5-LUG HUB WITH RACE 1-1/16" GALVANIZED

REPRESENTATION PHOTO MAGIC TILT HUB W/ RACE ~ PD1670 TYPE: IDLER HUB SPINDLE: 1-1/16" x 1-1/16" BOLT PATTERN: 5 x 4.5" MATERIAL: GALVANIZED NOTES: INCLUDES RACES ALREADY INSTALLED NOT INCLUDED BEARING KIT: PE1100 (NON-UFP), PE1101 (UFP) SPINDLE HARDWARE KIT: PH2160 (NON UFP), PH2125 (UFP) BEARING PROTECTOR PF1054 AND BRA PF1060

Galvanized Fenders for Single Axle Trailers - PI1025-12" 5-1/2X24X32 [1/2 ROUND]

SPECS SKU: PI1025 Type: FENDER 12" 5-1/2X24X32 [1/2 ROUND] Material: Galvanized Tire Size: 12" Size: 5-1/2X24X32

Galvanized Fenders for Single Axle Trailers - PI1460-13" 7-1/4X27-1/2X37"

SPECS SKU: PI1460 Type: FENDER 13" 7-1/4X27-1/2X37" GH Material: Galvanized Tire Size: 13" Size: 7-1/4X27-1/2X37"

Galvanized Fenders for Single Axle Trailers - PI1510-14" 8-1/2X29-1/2X40-3/4"

SPECS SKU: PI1510 Type: FENDER 14" 8-1/2X29-1/2X40-3/4" GH Material: Galvanized Tire Size: 14" Size: 8-1/2X29-1/2X40-3/4"

Galvanized Fenders for Single Axle Trailers - PI1515-15" 9X32X50

SPECS SKU: PI1515 Type: FENDER 15" 9X32X50 Material; Galvanized Tire Size: 15" Size: 9X32X50

Galvanized Fenders for Single Axle Trailers - PI1631-13" SQUAREBACK

SPECS SKU: PI1631 Type: FENDER CUSTOM 13" SQUAREBACK Material: Galvanized Tire Size: 13" Width: 9-1/4" Height: 13" Length: 29" Wrap: 43"

Galvanized Fenders for Single Axle Trailers - PI1662-14" SQUAREBACK

SPECS SKU: PI1662 Type: FENDER CUSTOM 14" SQUAREBACK Material: Galvanized Tire Size: 14" Width: 9" Height: 13" Length: 32" Wrap: 45"

PI1002 ~ 1-AXLE FENDER GALVANIZED 7" x 6" x 21"

REPRESENTATION PHOTO MAGIC TILT FENDER ~ PI1002 TYPE: SINGLE AXLE FENDER MOST COMMON TIRE SIZE: 8" & 12" MATERIAL: GALVANIZED WIDTH: 7" HEIGHT: 6" LENGTH: 21" WRAP: 24" NOTES: 3/8" SIDE MOUNT HOLES ON 12" CENTERS CAN BE MOUNTED WITH TWO PI0100 BRACKETS MOST COMMONLY USED WITH 8" TIRES WHILE BOLTED TO FRAME MOUNTING HARDWARE NOT INCLUDED

PI0606 ~ 1-AXLE FENDER GALVANIZED PONTOON 7" x 8-1/4" x 26" (KARAVAN 206-00109)

REPRESENTATION PHOTO MAGIC TILT PONTOON FENDER ~ PI0606 TYPE: SINGLE AXLE PONTOON FENDER WIDTH: 7" HEIGHT: 8-1/4" LENGTH: 26" MATERIAL: GALVANIZED MOST COMMON TIRE SIZE: 13" BRAND: KARAVAN 206-00109 NOTES: CAN BE USED IN PAIRS FOR A TANDEM-AXLE APPLICATION CAN USE THE PV9000-1 NON-SKID FENDER DECAL (NOT INCLUDED) FENDER BRACKETS (NOT INCLUDED) MOUNTING HARDWARE NOT INCLUDED

Galvanized Fenders for Single Axle Trailers - PI1000-8" 7X21X24"

SPECS SKU: PI1000 Type: FENDER 8" 7X21X24" GH Material: Galvanized Tire Size: 8" Size: 7X21X24

Galvanized Fenders for Single Axle Trailers - PI1005-7X21X24 W/BRKT 8"&12"

SPECS SKU: PI1005 Type: FENDER 7X21X24 W/BRKT 8"&12" TYPE A Material: Galvanized Tire Size: 8" & 12" Size: 7X21X24

Galvanized Fenders for Tandem Axle Trailers - PI1570-T-DROP 14" 8-1/2X64X74"

SPECS SKU: PI1570 Type: TDM FENDER T-DROP 14" 8-1/2X64X74" Material: Galvanized Tire Size: 14" Width: 9" Height: 13" Length: 63-1/2" Wrap: 74"

Galvanized Fenders for Tandem Axle Trailers - PI1715-T-DROP 15" 9-1/2X67X87

SPECS SKU: PI1715 Type: TND FENDER T-DROP 15" 9-1/2X67X87 Material: Galvanized Tire Size: 15" Width: 9" Height: 17" Length: 68" Wrap: 87"

Galvanized Fenders for Tandem Axle Trailers - PI1250-13/14" 9X60X72

SPECS SKU: PI1250 Type: TND FENDER 13/14" 9X60X72 Material: Galvanized Tire Size: 13" & 14" Width: 9" Height: 13" Length: 60" Wrap: 74"

Galvanized Fenders for Tandem Axle Trailers - PI1560-T-DRP 13" 7-1/2X56-1/4X6

SPECS SKU: PI1560 Type: TDM FENDER T-DRP 13" 7-1/2X56-1/4X6 Material: Galvanized Tire Size: 13" Width; 7-1/2" Height: 10-1/2" Length; 56-1/4" Wrap: 65"

Stainless Ni-Lock Nuts - PY1820-NUT LOCK NI S/S 1/2

SPECS SKU: PY1820 Type: NUT LOCK NI S/S 1/2 Diameter1/2"

Stainless Ni-Lock Nuts - PY1815-NUT LOCK NI S/S 7/16

SPECS SKUPY1815 Type: NUT LOCK NI S/S 7/16 Diameter: 7/16"

Stainless Ni-Lock Nuts - PY1810-NUT LOCK NI S/S 3/8

SPECS SKU: PY1810 Type: NUT LOCK NI S/S 3/8 Diameter: 3/8"

Plated Ni-Lock Nuts - PY1315-NUT LOCK NI 1/2-13 PLTD

SPECS SKU: PY1315 Type: NUT LOCK NI 1/2-13 PLTD Thread: 1/2-13

Plated Ni-Lock Nuts - PY1310-NUT LOCK NI 7/16-14 PLTD

SPECS SKU: PY1310 Type: NUT LOCK NI 7/16-14 PLTD Thread: 7/16-14

Plated Ni-Lock Nuts - PY1305-NUT LOCK NI 3/8-16 PLTD

SPECS SKU: PY1305 Type: NUT LOCK NI 3/8-16 PLTD Thread: 3/8-16

Stainless Hex Nuts - PY1785-NUT HEX SS 1/2

SPECS SKU: PY1785 Type: NUT HEX SS 1/2 Material: Stainless Steel Diameter: 1/2"

Stainless Hex Nuts - PY1780-NUT HEX S/S 7/16

SPECS SKU: PY1780 Type: NUT HEX S/S 7/16 Diameter: 7/16"

Stainless Hex Nuts - PY1782-NUT HEX S/S 3/8

SPECS SKU: PY1782 Type: NUT HEX S/S 3/8 Diameter: 3/8"

Galvanized Hex Nuts - PY1410-NUT HEX 1/2-13 HDG

SPECS SKU: PY1410 Type: NUT HEX 1/2-13 HDG Material: Galvanized Diameter: 1/2-13

Galvanized Hex Nuts - PY1406-NUT HEX 7/16 HDG

SPECS SKU: PY1406 Type: NUT HEX 7/16 HDG Material: Galvanized Diameter: 7/16"

Galvanized Hex Nuts - PY1405-NUT HEX 3/8-16 HDG

SPECS SKU: PY1405 Type: NUT HEX 3/8-16 HDG Material: Galvanized Diameter: 3/8-16

Galvanized Flat Washers - PY1515-WASHER FLAT USS 1/2 HDG

SPECS SKU: PY1515 Type: WASHER FLAT USS 1/2 HDG Material: Galvanized Diameter: 1/2"

Galvanized Flat Washers - PY1505-WASHER FLAT USS 3/8 HDG

SPECS SKU: PY1505 Type: WASHER FLAT USS 3/8 HDG Material: Galv Diameter:3/8"

Galvanized Lock Washers - PY1610-WASHER LOCK 1/2 HDG

SPECS SKU: PY1610 Type: WASHER LOCK 1/2 HDG Material: Galvanized Diameter: 1/2"

Galvanized Lock Washers - PY1606-WASHER LOCK 7/16 HDG

SPECS SKU: PY1606 Type: WASHER LOCK 7/16 HDG Material: Galvanized Diameter: 7/16"

Galvanized Lock Washers - PY1605-WASHER LOCK 3/8 HDG

SPECS SKU: PY1605 Type: WASHER LOCK 3/8 HDG Material: Galvanized Diameter: 3/8"

PG4832 ~ BREAKAWAY CABLE TOP MOUNT DEMCO

REPRESENTATION PHOTO MAGIC TILT BREAWAY CABLE ~ PG4832 TYPE: EMERGENCY BRAKEAWAY CABLE APPLICATION: DA10, DA16, DA20, DA91 ACTUATORS LENGTH: 40" BRAND: DEMCO

PG4812 ~ BREAKAWAY CABLE A-60, A-75 DEXTER / UFP

REPRESENTATION PHOTO MAGIC TILT BREAKAWAY CABLE ~ PG4812 TYPE: EMERGENCY BREAKAWAY CABLE APPLICATION: A-60, A-75 ACTUATORS BRAND: DEXTER / UFP NOTES: SEE REPLACEMENT VIDEO IN OUR TRAILER KNOWLEDGE SECTION

PG4827 ~ BREAKAWAY CABLE TOP MOUNT DEXTER/UFP A-160

REPRESENTATION PHOTO MAGIC TILT BREAWAY CABLE ~ PG4827 TYPE: EMERGENCY BRAKEAWAY CABLE APPLICATION: DEXTER / UFP A-160 LENGTH: 42 " BRAND: DEXTER / UFP

Actuator Cover Plate - PG1078- BRAKE LOCKOUT CAP-UFP

SPECS SKU: PG1078 Type: BRAKE LOCKOUT CAP-UFP IN-LINE#34023 Brand: UFP

PG4817 ~ ACTUATOR COVER PLATE DEXTER / UFP A-60/75

REPRESENTATION PHOTO MAGIC TILT ACTUATOR COVER PLATE ~ PG4817 TYPE: ACTUATOR DUST CAP FITS: DEXTER / UFP A-60, A-75 WIDTH: 2-1/2" MATERIAL: PLASTIC BRAND: DEXTER / UFP

PG4825 ~ ACTUATOR COVER PLATE DEXTER / UFP A-160

REPRESENTATION PHOTO MAGIC TILT ACTUATOR COVER PLATE ~ PG4825 TYPE: ACTUATOR DUST CAP APPLICATION: A-160 16K ACTUATOR WIDTH: 2-1/2" MATERIAL: PLASTIC BRAND: DEXTER / UFP SOLD INDIVIDUALLY

Rub Pads - PQ0500 POLY RUB PAD

SPECS SKU: PQ0500 Type: POLY RUB PAD [3"X12"] Qty: 1 Pad Size: 3"x12" Width: 3" Length: 12" 3" x 12" pad covers trailer cross member to protect boat keel. Non-marking polyurethane material will not leave marks on boat hull.

Rub Pads - PP2300-KEEL RUB PAD

SPECS SKU: PP2300 Type: KEEL RUB PAD [3"X12"] Qty: 1 Pad Size: 3"x12" Width: 3" Length: 12"

PP2245 ~ RUB STRIP WITH HOLES 4" x 10" x 3/8"

REPRESENTATION PHOTO MAGIC TILT RUB STRIP ~ PP2245 TYPE: V RUB STRIP W/ HOLES WIDTH: 3-7/8" THICKNESS: 3/8" LENGTH: 10" COLOR: WHITE MATERIAL: UHMV POLY NOTES: INCLUDES 4 SELF TAPPING MOUNTING SCREWS REPLACEMENT CENTER PAD FOR PV2280-3 ASSEMBLY PRE-DRILLED HOLE PATTERN NOT GUARANTEED TO MATCH OLDER HOLE PATTERN SOAK STRIP IN HOT WATER PRIOR TO INSTALLATION

PP2258 ~ BUNK SLIDE 3/8" x 12" x 8'

REPRESENTATION PHOTO MAGIC TILT BUNK SLIDE ~ PP2258 (PLEASE CALL 941-358-1117 FOR SHIPPING QUOTE AND TO ORDER) TYPE: RUB STRIP WIDTH: 12" LENGTH: 8' THICKNESS: 3/8" COLOR: WHITE MATERIAL: UHMV NOTES: PREMOLDED WITH VEE DOWN CENTER NO HOLES MOUNTING HARDWARE NOT INCLUDED

PP2270 ~ RUB STRIP 1-3/4 x 15

REPRESENTATION PHOTO MAGIC TILT RUB STRIP ~ PP2270 TYPE: PLASTIC RUB STRIP MATERIAL: PLASTIC COLOR: BLACK DEPTH: 1-3/4" LENGTH: 15" NOTES: CAN BE TRIMMED TO DESIRED LENGTH MOUNTING HARDWARE NOT INCLUDED MOUNTED WITH RIVETS FROM FACTORY CAN BE MOUNTED WITH THREE PY0491 SCREWS

PP2260 ~ RUB STRIP 3 x 2

REPRESENTATION PHOTO MAGIC TILT RUB STRIP ~ PP2260 TYPE: RUB STRIP COLOR: BLACK MATERIAL: RUBBER DEPTH: 2" WIDTH: 3" NOTES: MOUNTING HARDWARE NOT INCLUDED MOUNTED WITH RIVETS FROM FACTORY CAN BE MOUNTED WITH TWO PY0491 SCREWS

PD1702-L-100 ~ 5-LUG HUB ASSEMBLY 1-1/16"x1-3/8" GREASED (NON UFP) — PALLET OF 100

SPECS SKU: PD1702-L-100 Type: HUB KIT ASSY, GREASED, 1-3/8X1-1/16 5L (GALV) PALLET OF 100 Bolt Pattern:5LX4.5" Size: 1-3/8X1-1/16" Finish: Galv

PD1702-L ~ 5-LUG HUB ASSEMBLY 1-1/16"x1-3/8" GREASED (NON UFP)

REPRESENTATION PHOTO MAGIC TILT PRE-GREASED HUB ASSEMBLY ~ PD1702-L MATERIAL: GALVANIZED TYPE: NON UFP BEARING SIZE: 1-1/16" x 1-3/8" BOLT PATTERN: 5 x 4.5" APPLICATION: ANY 3500-POUND AXLE USING 1-1/16" x 1-3/8" BEARINGS AND A SEAL WITH 1.719" ID INCLUDES: 1 x PD1760 GALV HUB 5 x PD2250 LUG NUT 1/2" 1 x PE1400 BEARING 1-1/16" (44649) (INSTALLED) 1 x PE1450 BEARING 1-3/8" (68149) (INSTALLED) 1 x PE1710 RACE (44610) (INSTALLED) 1 x PE1750 RACE (68111) (INSTALLED) 1 x PE2050 SEAL 2.565" OD x 1.719" ID (INSTALLED) 1 x PE2301 POSI-LUBE DUST CAP 1.98" 1 x PE2311 POSI-LUBE RUBBER PLUG 1 x PH2014 COTTER PIN 1/8" x 1-3/4" PLATED NOTES: COMES PRE-GREASED AND ASSEMBLED - READY TO USE DO YOU NEED? (NOT INCLUDED) MOUNTING HARDWARE: PH2160 PF1054 BEARING PROTECTOR PF1060 BRA

PD1700-L ~ 5-LUG HUB ASSEMBLY 1-1/16"x1-3/8" GREASED (UFP)

Magic Tilt Pre-Greased Hub Assembly ~ PD1700-L Material: Galvanized Type: UFP Bearing Size: 1-1/16" x 1-3/8" Bolt Pattern: 5 x 4.5" Application: Any 3500-Pound UFP Axle 2003 And Later Any Axle Using 1-1/16" x 1-3/8" Bearings and a seal with 1.68" ID Included in this kit: 1 x PD1760 Galv Hub 5 x PD2250 Lug Nut 1/2" 1 x PE1400 Bearing 1-1/16" (44649) (Installed) 1 x PE1450 Bearing 1-3/8" (68149) (Installed) 1 x PE1710 Race (44610) (Installed) 1 x PE1750 Race (68111) (Installed) 1 x PE2055 Seal 2.561" OD x 1.687" ID (Installed) 1 x PE2301 Posi-Lube Dust Cap 1.98" 1 x PE2311 Posi-Lube Rubber Plug 1 x PH2012 Cotter Pin 1/8" x 1-1/4" Plated Good to know: Comes pre-greased and assembled - ready to use Need? (sold separately) Mounting Hardware: PH2125 PF1054 Bearing Protector PF1060 Bra

PD1602-L ~ 5-LUG HUB ASSEMBLY 1-1/16" BEARINGS 1.25" ID SEAL GREASED (UFP & NON-UFP)

REPRESENTATION PHOTO MAGIC TILT PRE-GREASED HUB ASSEMBLY ~ PD1602-L MATERIAL: GALVANIZED BEARING SIZE: 1-1/16" x 1-1/16" BOLT PATTERN: 5 x 4.5" APPLICATION: ALL 1-1/2" x 1-1/2" AXLES USING 1-1/16" BEARINGS AND 1.25" ID SEAL (UFP AND NON-UFP) ALL 2" x 2" 1,500 TO 2,500-POUND UFP AXLES FROM 2022 ON NOTES: COMES PRE-GREASED AND ASSEMBLED - READY TO USE IF YOU HAVE A 2" x 2" UFP AXLE THAT USES 1-1/16" BEARINGS A 1.38" ID SEAL, USE PD1600 HUB KIT. INCLUDES: 1 x PD1670 GALV HUB 5 x PD2250 LUG NUT 1/2" 2 x PE1400 BEARING 1-1/16" (44649) (INSTALLED) 2 x PE1710 RACE (44610) (INSTALLED) 1 x PE2010 SEAL 1.98" OD x 1.25" ID (INSTALLED) 1 x PE2301 POSI-LUBE DUST CAP 1.98" 1 x PE2311 POSI-LUBE RUBBER PLUG 1 x PH2014 COTTER PIN 1/8" x 1-3/4" PLATED DO YOU NEED? (NOT INCLUDED) PF1054 BEARING PROTECTOR PF1060 BRA

PD2750 ~ 5-LUG MAINTENANCE-FREE HUB ASSEMBLY KNOTT (KARAVAN 200-00036-SP2)

REPRESENTATION PHOTO MAGIC TILT KNOTT HUB ASSEMBLY ~ PD2750 TYPE: KNOTT MAINTENANCE-FREE HUB ASSEMBLY BOLT PATTERN: 5 x 4.5" FINISH: GALVANIZED BRAND: KARAVAN 200-00036-SP2 INCLUDES: 1 X GALVANIZED HUB WITH SEALED BEARINGS 5 X LUG NUTS PLATED 1 X CRUSH SPINDLE NUT 1 X DUST CAP 1 X DUST CAP O-RING PLEASE NOTE NEVER REUSE THE OLD AXLE NUT TIGHTEN THE NEW AXLE NUT TO 207 FT-LBS (280 NM)

5Lug Hub Assemblies - PD1700-HUB ASSY 1-3/8X1-1/16 5L

SPECS SKU: PD1700 Type: HUB ASSY 1-3/8X1-1/16 5L Size: 1-3/8X1-1/16" Bolt Pattern: 5LX4.5" Brand: UFP

PD1600 ~ 5-LUG HUB ASSEMBLY 1-1/16" BEARINGS 1.38" ID SEAL GREASED (UFP)

REPRESENTATION PHOTO MAGIC TILT KUB KIT ASSEMBLY ~ PD1600 FINISH: ZINC COATED BEARING SIZE: 1-1/16" x 1-1/16" BOLT PATTERN: 5 x 4.5" APPLICATION: 2003 TO 2021 UFP 2" x 2" AXLES WITH 1-1/16" STRAIGHT SPINDLES THAT USED A 1.38" ID SEAL BRAND: UFP INCLUDES: 1 x HUB ZINC W/ RACES 5-LUG 5 x LUG NUT 13/16" 2 x BEARING 1-1/16" (44649) 1 x SEAL 1-1/16" UFP (198-138) 1 x DUST CAP 1" (1.980) 1 x COTTER PIN 1/8" x 1-3/4" PLATED DO YOU NEED? (NOT INCLUDED) MOUNTING HARDWARE: PH2125 PF1054 BEARING PROTECTOR PF1060 BRA

PD2550-L ~ 6-LUG HUB ASSEMBLY 1-1/4"x1-3/4" GREASED (UFP)

REPRESENTATION PHOTO MAGIC TILT PRE-GREASED HUB ASSEMBLY ~ PD2550-L MATERIAL: GALVANIZED TYPE: UFP BEARING SIZE: 1-1/4" x 1-3/4" CAPACITY: 3,000 POUNDS BOLT PATTERN: 6 x 5.5" APPLICATION: ANY 5200-POUND UFP AXLE 2003 AND LATER ANY AXLE USING 1-1/4" x 1-3/4" BEARINGS, A SEAL WITH 2.125" ID, PH2130 HARDWARE INCLUDES: 1 x PD1857 GALV HUB W/ 2" LONG STUDS 6 x PD2250 LUG NUT 1/2" 1 x PE1550 BEARING 1-1/4" (151123) (INSTALLED) 1 x PE1600 BEARING 1-3/4" (25580) (INSTALLED) 1 x PE1850 RACE OUTER (15245) (INSTALLED) 1 x PE1900 RACE INNER (25520) (INSTALLED) 1 x PE2101 SEAL 3.38" OD x 2.125" ID (21333) (INSTALLED) 1 x PE2303 POSI-LUBE DUST CAP 2.441" 1 x PE2311 POSI-LUBE RUBBER PLUG 1 x PH2012 COTTER PIN 1/8" x 1-1/4" PLATED NOTES: COMES PRE-GREASED AND ASSEMBLED - READY TO USE

PD2450-L ~ 6-LUG HUB ASSEMBLY 1-1/4"x1-3/4" GREASED (NON UFP)

REPRESENTATION PHOTO MAGIC TILT PRE-GREASED HUB ASSEMBLY ~ PD2450-L MATERIAL: GALVANIZED TYPE: NON UFP BEARING SIZE: 1-1/4" x 1-3/4" CAPACITY: 3,000 POUNDS BOLT PATTERN: 6 x 5.5" APPLICATION: ANY 5200-POUND AXLE USING 1-1/4" x 1-3/4" BEARINGS, A SEAL WITH 2.25" ID, 1" CASTLE NUT. INCLUDES: 1 x PD1857 GALV HUB W/ LONG STUDS 6 x PD2250 LUG NUT 1/2" 1 x PE1550 BEARING 1-1/4" (15123) (INSTALLED) 1 x PE1600 BEARING 1-3/4" (25580) (INSTALLED) 1 x PE1850 RACE OUTER (15245) (INSTALLED) 1 x PE1900 RACE INNER (25520) (INSTALLED) 1 x PE2100 SEAL 3.38" OD x 2.25" ID (22333) (INSTALLED) 1 x PE2303 POSI-LUBE DUST CAP 2.441" 1 x PE2311 POSI-LUBE RUBBER PLUG 1 x PH2014 COTTER PIN 1/8" x 1-3/4" PLATED NOTES: COMES PRE-GREASED AND ASSEMBLED - READY TO USE DO YOU NEED? (NOT INCLUDED) MOUNTING HARDWARE: PH2165 PF1101 BEARING PROTECTOR PF1063 BRA

6Lug Hub Assemblies - PD2500-HUB ASSY CAST 1-1/4X1-3/4 6L

SPECS SKU: PD2500 Type: HUB ASSY CAST 1-1/4X1-3/4 6L Bearing Size: 1-1/4X1-3/4 Bolt Pattern: 6LX5.5" Brand: UFP

6Lug Hub Assemblies - PD2502-HUB ASSY 1-1/4X1-3/4 6L (GALV.)

SPECS SKU: PD2502 Type: HUB ASSY 1-1/4X1-3/4 6L (GALV.) Material: Galv Bearing Size: 1-1/4X1-3/4 Bolt Pattern: 6LX5.5" Brand: UFP

8Lug Hub Assemblies - PD2600-HUB ASSY CAST 1-1/4X1-3/4 8L

SPECS SKU: PD2600 Type: HUB ASSY CAST 1-1/4X1-3/4 8L Bearing Size: 1-1/4X1-3/4 Bolt Pattern: 8LX6.5" Brand: UFP

8Lug Hub Assemblies - PD2602-HUB ASSY 1-1/4X1-3/4 8L (GALV)

SPECS SKU: PD2602 Type: HUB ASSY 1-1/4X1-3/4 8L (GALV) Material: Galv Bearing Size: 1-1/4X1-3/4 Bolt Pattern: 8LX6.5" Brand: UFP

PH2050 ~ AXLE WASHER 3/4" F436

REPRESENTATION PHOTO MAGIC TILT AXLE WASHER ~ PH2050 TYPE: AXLE WASHER F436 OUTSIDE DIAMETER: 1-1/2" INSIDE DIAMETER: 3/4" THICKNESS: .140" FINISH: PLATED SOLD INDIVIDUALLY

PH2105 ~ TANG WASHER 1"

REPRESENTATION PHOTO MAGIC TILT TANG WASHER ~ PH2105 TYPE: TANG WASHER INSIDE DIAMETER: 7/8" x 1" OUTSIDE DIAMETER: 1-9/16" THICKNESS: 0.04" SOLD INDIVIDUALLY NOTES:

PH2060 ~ AXLE WASHER 1"

REPRESENTATION PHOTO MAGIC TILT AXLE WASHER ~ PH2060 TYPE: AXLE WASHER INSIDE DIAMETER: 1" OUTSIDE DIAMETER: 1-3/4" THICKNESS: .10" SOLD INDIVIDUALLY

PH2070 ~ AXLE D WASHER 1"

REPRESENTATION PHOTO MAGIC TILT AXLE WASHER ~ PH2070 TYPE: AXLE "D" WASHER INSIDE DIAMETER: 7/8" x 1" WIDE OUTSIDE DIAMETER: 1-11/16" THICKNESS: 0.12" SOLD INDIVIDUALLY

PH2066 ~ AXLE D WASHER 3/4" x 13/16" x .184" (DEXTER / UPF)

REPRESENTATION PHOTO MAGIC TILT AXLE WASHER ~ PH2066 TYPE: AXLE "D" WASHER INSIDE DIAMETER: 3/4" x 13/16" OUTSIDE DIAMETER: 1-7/8" THICKNESS: .184" BRAND: DEXTER / UFP SOLD INDIVIDUALLY NOTE: THICKER. USED ON 5000 LB. AND GREATER UFP AXLES

PH2065 ~ AXLE D WASHER 3/4" x 13/16" x .137" (DEXTER / UFP)

REPRESENTATION PHOTO MAGIC TILT AXLE WASHER ~ PH2065 TYPE: AXLE "D" WASHER INSIDE DIAMETER: 3/4" x 13/16" OUTSIDE DIAMETER: 1-5/8" THICKNESS: .137" BRAND: DEXTER / UFP SOLD INDIVIDUALLY NOTE: THINNER. USED ON 2000 TO 3500 LB. UFP AXLES

PK1731 ~ SLIPPER SPRING HANGER GALVANIZED

REPRESENTATION PHOTO MAGIC TILT SLIPPER SPRING HANGER ~ PK1731 MATERIAL: GALVANIZED LENGTH: 5" WIDTH: 2" (BASE PLATE) THICKNESS: 3/16" MOUNT HOLES: 3/8" NOTES: MOUNTS THROUGH 2"-WIDE TUBE FRAME FOR SINGLE-EYE SPRING REAR HANGER

PK1702-T ~ SPRING HANGER 2-PIECE CA-SERIES 2-BOLT GALVANIZED

REPRESENTATION PHOTO MAGIC TILT SPRING HANGER ~ PK1702-T TYPE: HEAVY DUTY 2-PIECE SPRING HANGER APPLICATION: CA-SERIES TUBE FRAMES WITH BOTTOM CHANNEL HOLE SIZE: 1/2" WIDTH: 2" BOTTOM PLATE LENGTH: 5" BOTTOM PLATE HEIGHT: 3" MATERIAL: GALVANIZED NOTES: USE WITH PY1701 SQUARE MOUNT BOLTS

PK1703 ~ SPRING HANGER 2-PIECE MEDIUM-DUTY GALVANIZED

REPRESENTATION PHOTO MAGIC TILT SPRING HANGER ~ PK1703 TYPE: MEDIUM-DUTY 2 PIECE SPRING HANGER HOLE SIZE TO FRAME: 3/8" HOLE CENTERS: 1-1/2" x 3-5/8" WIDTH: 3" HEIGHT: 3-1/8" LENGTH: 4-3/4" THICKNESS: 1/4" MATERIAL: GALVANIZED

PK1702 ~ SPRING HANGER 2-PIECE HEAVY-DUTY GALVANIZED

REPRESENTATION PHOTO MAGIC TILT SPRING HANGER ~ PK1702 TYPE: HEAVY-DUTY 2 PIECE SPRING HANGER HOLE SIZE TO FRAME: 1/2" HOLE CENTERS: 1-3/4" x 3-5/8" WIDTH: 3" HEIGHT: 3-1/8" LENGTH: 4-3/4" THICKNESS: 5/8" MATERIAL: GALVANIZED

PK1701 ~ SPRING HANGER 1-PIECE STANDARD GALVANIZED

REPRESENTATION PHOTO MAGIC TILT SPRING HANGER ~ PK1701 TYPE: ML SPRING HANGER FORMED ONE-PIECE SPRING MOUNT HOLE SIZE: 1/2" FRAME MOUNT HOLE SIZE: 3/8" HOLE CENTERS: 1-1/2" x 3-5/8" BASE: 4-1/2" x 2-1/4" MATERIAL: GALVANIZED NOTES: WORK ON FRONT OR REAR OF SPRINGS. WINGS ARE SPREAD TO ACCOMMODATE PIVOT SHACKLES AT REAR. IF NO PIVOT SHACKLES ARE USED (FRONT MOUNT, ONE-EYE SPRINGS) YOU CAN PULL THE WINGS DOWN TO 90° WITH THE SPRING EYE BOLT. SPRING-EYE BOLT PK1450 (NOT INCLUDED)

PK1450 ~ SPRING-EYE BOLT WITH LOCK NUT 1/2" x 3-1/2"

REPRESENTATION PHOTO MAGIC TILT BOLT W/ NUT ~ PK1450 TYPE: SPRING EYE BOLT W/ LOCK NUT SIZE: 1/2" x 3-1/2" MATERIAL: PLATED LENGTH: 3-1/2" FINISH: GRADE 5 NOTES: SPRING EYE BOLTS NEED TO BE GRADE 5 AND HAVE A NYLOCK NUT STAINLESS STEEL BOLTS TO NOT MEET THE STRENGTH REQUIREMENTS AND GALVANIZED NYLOCK NUTS DO NOT EXIST BOLTS SHOULD NOT BE TOO TIGHT. SPRINGS MUST BE ALLOWED TO MOVE FREELY AROUND THE EYE BOLTS

PD2250 ~ LUG NUT 1/2"

REPRESENTATION PHOTO MAGIC TILT LUG NUT ~ PD2250 TYPE: LUG NUT DIAMETER: 1/2" WRENCH SIZE: 13/16" LENGTH: 11/16" THREAD PITCH: 20 FINISH: ZINC PLATED SOLD INDIVIDUALLY

Lug Nuts - PD2251-CHROME LUG NUT (MCGARD)

SPECS SKU: PD2251 Type: CHROME LUG NUT (MCGARD #69400)EA. Finish: Chrome Thread: 1/2"x20

PD2255 ~ LUG NUT ACORN 1/2" STAINLESS STEEL

REPRESENTATION PHOTO MAGIC TILT ACORN LUG NUT~ PD2255 TYPE: FULL BODY LUG NUT DIAMETER: 1/2" LENGTH: 1-1/2" THREAD: 20 FINISH: STAINLESS STEEL SOLD INDIVIDUALLY

1/2" Galvanized Square U-Bolts - PY2035-1/2X3-1/16X4-5/16

SPECS SKU: PY2035 Type: UBOLT 1/2X3-1/16X4-5/16 SQ GLV Material: Galvanized Diameter: 1/2" Width: 3-1/16" Length: 4-5/16"

1/2" Galvanized Square U-Bolts - PY2037-1/2X3-1/16X5-5/16

SPECS SKU: PY2037 Type: UBOLT 1/2X3-1/16X5-5/16 SQ GLV Material: Galvanized Diameter: 1/2" Width: 3-1/16" Length: 5-5/16"

1/2" Galvanized Square U-Bolts - PY2070-1/2X3-1/16X6-5/16

SPECS SKU: PY2070 Type: UBOLT 1/2X3-1/16X6-5/16 SQ GALV Material: Galvanized Diameter: 1/2" Width: 3-1/16" Length; 6-5/16"

1/2" Galvanized Square U-Bolts - PY2075-1/2X3-1/16X6-13/16

SPECS SKU: PY2075 Type: UBOLT 1/2X3-1/16X6-13/16 SQ GALV Material: Galvanized Diameter: 1/2" Width: 3-1/16" Length: 6-13/16"

1/2" Galvanized Square U-Bolts - PY2077-1/2X3-1/16X7-5/16

SPECS SKU: PY2077 Type: UBOLT 1/2X3-1/16X7-5/16 SQ GALV Material: Galvanized Diameter: 1/2" Width: 3-1/16" Length: 7-5/16"

1/2" Galvanized Square U-Bolts - PY2078-1/2X3-1/16X8-1/2

SPECS SKU: PY2078 Type: UBOLT 1/2X3-1/16X8-1/2" SQ GALV Material: Galvanized Diameter: 1/2" Width: 3-1/16" Length; 8-1/2"

1/2" Galvanized Square U-Bolts - PY2079-1/2X3-1/16X8

SPECS SKU: PY2079 Type: UBOLT 1/2X3-1/16X8 SQ GALV Material: Galvanized Diameter: 1/2" Width: 3-1/16" Length: 8"

1/2" Galvanized Square U-Bolts - PY2025-1/2X2-1/16X6-5/16

SPECS SKU: PY2025 Type: UBOLT 1/2X2-1/16X6-5/16 SQ GLV Material: Galvanized Diameter: 1/2" Width: 2-1/16" Length: 6-5/16"

1/2" Galvanized Square U-Bolts - PY2011-1/2X2-1/16X3-5/16

SPECS SKU: PY2011 Type: U-BOLT 1/2X2-1/16X3-5/16 SQ GALV Material: Galvanized Diameter: 1/2" Width: 2-1/16" Length: 3-5/16"

1/2" Galvanized Square U-Bolts - PY2010-1/2X2-1/16X4-5/16

SPECS SKU: PY2010 Type: UBOLT 1/2X2-1/16X4-5/16 SQ GAL Material: Galvanized Diameter: 1/2" Width: 2-1/16" Length: 4-5/16"

1/2" Galvanized Square U-Bolts - PY2015-1/2X2-1/16X4-13/16

SPECS SKU: PY2015 Type: UBOLT 1/2X2-1/16X4-13/16 SQ GV Material: Galvanized Diameter: 1/2" Width: 2-1/16" Length: 4-13/16"

1/2" Galvanized Square U-Bolts - PY2020-1/2X2-1/16X5-13/16

SPECS SKU: PY2020 Type: UBOLT 1/2X2-1/16X5-13/16 SQ GV Material: Galvanized Diameter: 1/2" Width: 2-1/16" Length: 5-13/16"

1/2" Galvanized Square U-Bolts - PY2050-1/2X2-1/16X6-13/16

SPECS SKU: PY2050 Type: UBOLT 1/2X2-1/16X6-13/16 SQ GALV Material: Galvanized Diameter: 1/2" Width: 2-1/16" Length: 6-13/16"

1/2" Galvanized Square U-Bolts - PY2027-1/2X2 3/8X5 1/2

SPECS SKU: PY2027 Type: UBOLT 1/2X2 3/8X5 1/2 SQ GALV Material: Galvanized Diameter: 1/2" Width: 2-3/8" Length: 5-1/2"

Brake Caliper Components - PG2200 - BRAKE LINE COUPLER

SPECS SKU: PG2200 Type: BRAKE LINE COUPLER 3/16" End 1 Type: Female Thread Length: 0.63 in Material: Brass Brand: UFP These unions are the best option to join two 3/16" brake lines together.

PG4862 ~ CALIPER FITTING PLUG (UFP)

REPRESENTATION PHOTO MAGIC TILT FITTING PLUG ~ PG4862 TYPE: CALIPER FITTINH PLUG SIZE: 3/16" FLARE BRAND: UFP SOLD INDIVIDUALLY NOTES: USE TO PLUG UNNEEDED PORTS ON DOUBLE BANJO FITTINGS

PG5058 ~ DISC BRAKE ADAPTER PLATE (DEXTER / UFP)

REPRESENTATION PHOTO MAGIC TILT ADAPTER PLATE ~ PG5058 TYPE: DISC BRAKE ADAPTER PLATE DIMENSIONS: 5-1/2" x 5-3/4" NOTES: ADAPTS 5-HOLE ROUND BRAKE PLATES TO 4-HOLE SQUARE ON 5.2K TO 7K AXLES. ALOWS DIRECT MOUNTING OF DEXTER / UFP CALIPERS ON 12" ROTORS. REQUIRES THE FOLLOWING HARDWARE (NOT INCLUDED) 5 X PY0215 3/8" x 1-1/14" BOLT 5 X PY1305 3/8" NYLOCK NUT

PG5007 ~ DISC CALIPER BOLT 7/16" x 1" DEXTER / UFP

REPRESENTATION PHOTO MAGIC TILT CALIPER BOLT ~ PG5007 TYPE: DISC CALIPER BOLT LENGTH: 1" THREAD: 7/16" APPLICATION: DEXTER/UFP DISC BRAKE CALIPER BRAND: DEXTER / UFP NOTES: USES 3/8" ALLEN WRENCH

ML Series Spare Tire Mounts - PV1883-1 ML DBL SPARE TIRE MOUNT H.D.ASSEMBLY

SPECS SKU: PV1883-1 Type: ML DBL SPARE TIRE MOUNT H.D.ASSEMBLY Material: Galv Note : photo does not include mounting hardware. For 5 and 6 lug galv rims

ML Series Spare Tire Mounts - PV1835-1 - DOUBLE ML W/5LUG DISC

SPECS SKU: PV1835-1 Type: SPARE TIRE MOUNT DOUBLE ML W/5LUG D Material: Galv

ML Series Spare Tire Mounts - PV1885-4-SPARE TIRE H.D. ASSY [AL MAG]

SPECS SKU: PV1885-4 Type: ML SPARE TIRE MOUNT H.D. ASSEMBLY [ALUM MAG] Fits: 3"X3"/ 3"X4" Material: Galvanized Width: 7" Length: 26"

PV1885-3 ~ CROSS-FRAME SPARE HARDWARE KIT (3x5 TONGUE)

REPRESENTATION PHOTO MAGIC TILT CROSS-FRAME MOUNTING HARDWARE ~ PV1885-3 TYPE: SPARE TIRE MOUNTING HARDWARE FITS: CROSS-FRAME SPARE MOUNTS TONGUE SIZE: 3" x 5" ONLY MATERIAL: GALVANIZED INCLUDES: 2 x PK1320 SLOT PLATE 1-HOLE GALV 2 x PK1300 SHACKLE PLATE 2-HOLE GALV 4 x PY1410 NUT HEX 1/2-13 GALV 4 x PY1659 SCREW HEX HEAD 1/2 x 9 GALV 8 x PY1515 FLAT WASHER US 1/2 GALV 4 x PY1610 LOCK WASHER 1/2 GALV INSTALLATION VIDEO

ML Series Spare Tire Mounts - PV1887- SPARE TIRE W/HUB 6L

SPECS SKU: PV1887 Type: ML SPARE TIRE MOUNT W/HUB 6L Material: Galvanized Hubs: 6 Lug Spindle/Bearing Size: 1-1/4 X 1-3/4" Brand: UFP

ML Series Spare Tire Mounts - PV1888-SPARE TIRE W/HUB 8L

SPECS SKU: PV1888 Type: ML SPARE TIRE MOUNT W/HUB 8L Material: Galvanized Length: 31" Hubs: 8Lug Spindle/Bearing Size: 1-3/4X1-1/4"

ML Series Spare Tire Mounts - PV1896-SPARE TIRE W/ 5L DISC

SPECS SKU: PV1896 Type: ML SPARE TIRE MOUNT W/ 5L DISC Material: Galvanized Hubs: 5 Lug Disc Spindle/Bearing: 1-3/8X1-1/16

ML Series Spare Tire Mounts - PV1897-SPARE TIRE W/ 6L DISC

SPECS SKU: PV1897 Type: ML SPARE TIRE MOUNT W/ 6L DISC Material: Galvanized Hubs: 6 Lug Disc Spindle/Bearing: 1-3/4"X1-1/4"

ML Series Spare Tire Mounts - PV1898-SPARE TIRE W/8LUG DISC

SPECS SKU: PV1898 Type: ML SPARE TIRE MOUNT W/8LUG DISC Material: Galvanized Hubs: 8 Lug Disc Spindle/ Bearing Size: 1-3/4"X1-1/4"

PV1900 ~ SPARE TIRE MOUNT HORIZONTAL WITH LOCK

REPRESENTATION PHOTO MAGIC TILT SPARE TIRE MOUNT 4" ~ PV1900 TYPE: BASIC SPARE TIRE MOUNT W/ LOCK TONGUE SIZE: 2" TO 3" WIDE x 3" OR 4" TALL TIRE SIZE: 8" TO 14" LUGS: 5 OR 6 FINISH: PLATED NOTES: MOUNTS TIRE HORIZONTALLY ACROSS TONGUE AND A-FRAME INCLUDES LOCK DOES NOT FIT 4-LUG RIMS

PV1885 ~ SINGLE CROSS-FRAME SPARE MOUNT (BAR ONLY)

REPRESENTATION PHOTO MAGIC TILT SINGLE SPARE TIRE MOUNT ~ PV1885 TYPE: ML CROSS-FRAME SPARE TIRE MOUNT TONGUE SIZE: 3x3, 3x4, 3x5 (WITH OPTIONAL HARDWARE KITS) LUGS: 5, 6 (DOES NOT WORK WITH 4 OR 8-LUG RIMS) TUBE: 2" x 2" LENGTH: 26" MATERIAL: GALVANIZED REQUIRES ONE OF THE FOLLOWING MOUNT KITS (NOT INCLUDED) PY8000 (3x3 OR 3x4 TONGUES) PV1885-3 (3x5 TONGUES) NOTES: BAR ONLY DOES NOT WORK WITH 4 OR 8-LUG RIMS MOUNTS ACROSS A-FRAME AND TONGUE WITH PROPER HARDWARE (NOT INCLUDED) INSTALLATION VIDEO

PV1885-1 ~ SINGLE CROSS-FRAME SPARE MOUNT KIT (3x3, 3x4 TONGUES)

REPRESENTATION PHOTO MAGIC TILT SINGLE SPARE TIRE MOUNT ASSEMBLY ~ PV1885-1 TYPE: ML CROSS-FRAME SPARE TIRE MOUNT ASSEMBLY TONGUE SIZE: 3x3 OR 3x4 TONGUES LUGS: 5, 6 (DOES NOT WORK WITH 4 OR 8-LUG RIMS) TUBE: 2" x 2" LENGTH: 26" MATERIAL: GALVANIZED NOTES: DOES NOT WORK WITH 4 OR 8-LUG RIMS MOUNTS ACROSS A-FRAME AND TONGUE INSTALLATION VIDEO INCLUDES: 2 x PD2250 LUG NUT 13/16" 2 x PG4860 PRESS-IN STUD UFP 2 x PK1320 1-HOLE SLOT PLATE GALV 1 x NW0480 2x2 END CAP 1 x PV1885 ML SPARE TIRE MOUNT GALV 4 x PY1410 NUT HEX 1/2-13 GALV 4 x PY1610 WASHER LOCK 1/2 GALV 2 x PY2050 U-BOLT 1/2 x 2-1/16 x 6-13/16 GALV

ML Series Spare Tire Mounts - PV1886-SPARE TIRE W/HUB 5L

SPECS SKU: PV1886 Type: ML SPARE TIRE MOUNT W/HUB 5L Material: Galvanized Hub Size: 5Lug Spindle/Bearing Size: 1-3/8X1-1/16 Brand: UFP

Pro Spare Tire Mounts - PV1820-TIRE MOUNT ASSEMBLY

SPECS SKU: PV1820 Type: PRO SPARE TIRE MOUNT ASSEMBLY Material: Galvanized

Pro Spare Tire Mounts - PV1818-TIRE MNT W/HUB 5L ASSEMBL

SPECS SKU: PV1818 Type: PRO SPARE TIRE MNT W/HUB 5L Fits: I-Beam Frame Material: Galvanized Hubs: 5 Lug Spindle/Bearing Size: 1-3/8"X1-1/16"

Pro Spare Tire Mounts - PV1850-SPARE TIRE MOUNT [CUSTOM]

SPECS SKU: PV1850 Type: SPARE TIRE MOUNT [CUSTOM] BOLT-ON G Material: Galvanized

Pro Spare Tire Mounts - PV1824-PRO SPARE TIRE MNT W/HUB 6L

SPECS SKU: PV1824 Type: PRO SPARE TIRE MNT W/HUB 6L Fits: I-Beam Frame Material: Galvanized Hubs: 6 lug Bearings: 1-1/4 X 1-3/4

Aluminum Fenders for Tandem Axle Trailers - PI1855-TND.ALUM.FENDER 13"

SPECS SKU: PI1855 Type: TND.ALUM.FENDER 13"[TREAD BRIGHT] Material: Aluminum Tire Size: 13" Width: 9" Length: 60" Wrap: 79"

Aluminum Fenders for Tandem Axle Trailers - PI1905-TDM.ALUM.FENDER 14"

SPECS SKU: PI1905 Type: TDM.ALUM.FENDER 14"[TREAD BRIGHT] Material: Aluminum Tire Size: 14" Width: 10" Length: 68" Wrap: 89"

PV2158-2 ~ TUBE GUIDE ASSY STANDARD CA CHANNEL MOUNT

REPRESENTATION PHOTO MAGIC TILT STANDARD TUBE GUIDE ASSEMBLY ~ PV2158-2 PLEASE CALL 941-358-1117 FOR SHIPPING QUOTE TYPE: STANDARD TUBE GUIDE ASSEMBLY APPLICATION: FOR MOUNTING TO A CA-SERIES TRAILER WITH UNDER-FRAME CHANNEL TUBE: 1-1/2" x 1-1/2" WIDTH: 26" TO BEND HEIGTH: 44" FROM BEND & 30" TO THE LIP PVC LENGTH: 60" MATERIAL: GALVANIZED INCLUDES: PS2658 HARDWARE KIT PV2159-66G GUIDE POLE PV2157 60" PVC SLEEVE WITH CAP OPTIONAL GUIDE POLE COVERS (62x30x5)

PV2158 ~ TUBE GUIDE ASSY STANDARD W/ U-BOLTS

REPRESENTATION PHOTO MAGIC TILT STANDARD TUBE GUIDE ASSEMBLY ~ PV2158 PLEASE CALL 941-358-1117 FOR SHIPPING QUOTE TYPE: STANDARD TUBE GUIDE ASSEMBLY W/ U-BOLTS (PAIR) APPLICATION: TO MOUNT GUIDE POLES INSIDE 3" x 3" CROSSMEMBER MATERIAL: GALVANIZED TUBE: 1-1/2" x 1-1/2" WIDTH: 26" TO THE BEND HEIGHT: 44" FROM BEND & 30" TO LIP PVC LENGTH: 60" INCLUDES: 2 x PV2159-66G STANDARD GUIDE POLE 2 x PV2157 60" PVC SLEEVE WITH CAP 8 x NUT HEX 3/8-16 GALV 8 x WASHER FLAT 3/8" GALV 8 x WASHER LOCK 3/8" GALV 4 x U-BOLT 3/8" x 1-9/16" x 2-5/8" GALV OPTIONAL GUIDE POLE COVERS (62x30x5)

PV2158-1 ~ TUBE GUIDE ASSY STANDARD W/ CLAMP-ON BRACKETS

REPRESENTATION PHOTO MAGIC TILT STANDARD TUBE GUIDE ASSEMBLY ~ PV2158-1 PLEASE CALL 941-358-1117 FOR SHIPPING QUOTE TYPE: STANDARD GUIDE ASSEMBLY W/ CLAMP-ON BRACKETS MATERIAL: GALVANIZED TUBE: 1-1/2" x 1-1/2" WIDTH: 26" TO THE BEND HEIGHT: 44" FROM BEND & 30" TO THE LIP PVC LENGTH: 60" INCLUDES: 2 x PV2159-66G STANDARD GUIDE POLE 2 x PV2157 60" PVC SLEEVE WITH CAP 8 x BOLT 3/8" x 1-1/4" GALV 8 x NUT HEX 3/8" GALV 16 x WASHER FLAT 3/8" GALV 8 x WASHER LOCK 3/8" GALV 2 x PS2653-1 1-1/2Z' CLAMP-ON BRACKETS GALV OPTIONAL GUIDE POLE COVERS (62x30x5)

PV2165 ~ TUBE GUIDE ASSY HEAVY DUTY W/ U-BOLTS

REPRESENTATION PHOTO MAGIC TILT TUBE GUIDE ASSEMBLY ~ PV2165 (PLEASE CALL 941-358-1117 FOR SHIPPING QUOTE) TYPE: SUPER HD TUBE GUIDE ASSEMBLY (LONGER / TALLER) APPLICATION: TO MOUNT GUIDE POLES INSIDE 3" x 3" CROSSMEMBER MATERIAL: GALVANIZED TUBE: 1-1/2" x 1-1/2" HEIGHT: 63" (50" FROM LIP) WIDTH: 36" PVC LENGTH: 72" INCLUDES: 2 x PV2164 SUPER HD GUIDE POLE 2 x PV2166 72" PVC SLEEVE WITH CAP 8 x NUT HEX 3/8-16 GALV 8 x WASHER FLAT 3/8" GALV 8 x WASHER LOCK 3/8" GALV 4 x U-BOLT 3/8" x 1-9/16" x 2-5/8" GALV OPTIONAL GUIDE POLE COVERS (74x39x5)

PV2155 ~ TUBE GUIDE ASSY STANDARD UNIVERSAL GALVANIZED TRAILERS

REPRESENTATION PHOTO MAGIC TILT STANDARD GUIDE ASSEMBLY ~ PV2155 PLEASE CALL 941-358-1117 FOR SHIPPING QUOTE TYPE: GUIDE POLE ASSEMBLY FOR GALVANIZED FRAMES APPLICATION: 2" WIDE GALVANIZED FRAMES MATERIAL: GALVANIZED TUBE: 1-1/2" x 1-1/2" WIDTH: 26" TO BEND HEIGHT: 44" FROM BEND & 30" TO THE LIP PVC LENGTH: 60" INDICATE FRAME HEIGHT WHEN CALLING 3", 4", 5" NOTES: UNIVERSAL KIT FOR TRAILERS WITH 2" WIDE GALVANIZED FRAMES USES PV1930 MOUNTING KIT AND PV2159-66G GUIDE POLE OPTIONAL GUIDE POLE COVERS (62x30x5)

Side Guide Assemblies - PT2110-NARROW SIDE GUIDE ASSY

SPECS SKU: PT2110 Type: NARROW SIDE GUIDE ASSY. PAIR Material: Galvanized

Side Guide Assemblies - PT2112-WIDE SIDE GUIDE ASSY

SPECS SKU: PT2112 Type: WIDE SIDE GUIDE ASSY.PAIR Material: Galvanized

Side Guide Assemblies - PT2120-GUIDE BOARD ASSY

SPECS SKU: PT2120 Type: GUIDE BOARD KIT 2X6X6' H.D. PAIR GV Material: Galv poles Guide Boards: 2X6X6ft long Guide Poles: 20" tall

Side Guide Assemblies - PV2204-AIRBOAT GUIDE 3' BOARD ASSY

SPECS SKU: PV2204 Type: AIRBOAT GUIDE 3' BOARD ASSEMBLY Material: Galv Side Guide: 2X6X3ft long Carpeted Airboat Guide Board Pole: 20"

Side Guide Assemblies - PV2207-AIRBOAT GUIDE 6' BOARD ASSY

SPECS SKU: PV2207 Type: AIRBOAT GUIDE 6' BOARD ASSEMBLY

PV2220 ~ PONTOON GUIDE ASSEMBLY

REPRESENTATION PHOTO MAGIC TILT GUIDE ASSEMBLY ~ PV2220 TYPE: PONTOON GUIDE ASSEMBLY (EACH) FITS: 2" x 2" TUBE MATERIAL: GALVANIZED TUBE WITH PVC UPRIGHT HEIGHT: 18" MOUNT HOLE DIAMETER: 3/8" NOTES: SOLD INDIVIDUALLY REQUIRES 3/8" x 3" GALVANIZED BOLT WITH FASTENERS (NOT INCLUDED)

Angles for Single Axle - PK2500-38" ANGLE-12" STEP-LH

SPECS SKU: PK2500 Type: 38" ANGLE-12" STEP 14" TIRE-LH Material: Galv Length: 38" Steps: 12" Side: Left Hand

PK2513 ~ 1-AXLE UNDERCARRIAGE 38" 2-EYE OUTSIDE MOUNT

REPRESENTATION PHOTO MAGIC TILT UNDERCARRIAGE ~ PK2513 TYPE: SINGLE AXLE UNDERCARRIAGE FOR ALUMINUM STEPS LENGTH: 38" MOUNT LOCATION: OUTSIDE OF FRAME SPRING SIZE: 25-1/4" DOUBLE EYE (NOT INCLUDED) STEP SIZE: 10" ALUMINUM STEP PADS (NOT INCLUDED) MOST COMMON TIRE SIZE: 13", 14" FENDERS: PI1805 OR PI1805-S (NOT INCLUDED) MATERIAL: GALVANIZED NOTES: WILL WORK ON EITHER LEFT OR RIGHT SIDES 31" BETWEEN STEP MOUNTS USED ON ALUMINUM FRAME TRAILERS HOLE SIZE FOR MOUNTING TO FRAME: 1/2" BOLT PATTERN FOR MOUNTING TO FRAME MAY NOT MATCH EXISTING UNDERCARRIAGE AXLE & SPRING-TO-UNDERCARRIAGE HARDWARE KITS: 2x2 AXLES: GALVANIZED PK1100 , STAINLESS/GALV PK1100-SS 2x3 AXLES: GALVANIZED PK1100-1 SPRING EYE BOLT: PK1450

Angles for Single Axle - PK2260-38" ANGLE W/FENDER BRKTS

SPECS SKU: PK2260 Type: 38" ANGLE W/FENDER BRKTS-RH Fits:10" and 12" Tire Material:Galvanized Length:38" Side:Right

Angles for Single Axle - PK2250-38" ANGLE W/FENDER BRKT

SPECS SKU: PK2250 Type: 38" ANGLE W/FENDER BRKTS-LH Fits:10" and 12" Tire Material: Galvanized Length: 38" Side: Left

Angles for Single Axle - PK2252-38" ANGLE W/FNDR BRTK[LOW]

SPECS SKU: PK2252 Type: 38" ANGLE W/FNDR BRTK [WELDED LOW]L Length: 38" Material: Galv

Angles for Single Axle - PK2262-38" ANGLE W/FNDR BRKT [LOW]

SPECS SKU: PK2262 Type: 38" ANGLE W/FNDR BRKT [WELDED LOW] Material: Galv Lenght: 38"

Angles for Single Axle - PK2350-38" ANGLE-8" STEP LH

SPECS SKU: PK2350 Type: 38" ANGLE-8" STEP 13" TIRE-LH Material: Galv Length: 38" Steps: 8" Side: Left Hand

Angles for Single Axle - PK2360-38" ANGLE-8" STEP RH

SPECS SKU: PK2360 Type: 38" ANGLE-8" STEP 13" TIRE-RH Material: Galv Length: 38" Steps: 8" Side: Right Hand

Angles for Single Axle - PK2400-38" ANGLE-12" STEP LH

SPECS SKU: PK2400 Type: 38" ANGLE-12" STEP 13" TIRE-LH Material: Galv Length: 38" Steps: 12" Side: Left Hand

Angles for Single Axle - PK2410-38" ANGLE-12" STEP RH

SPECS SKU: PK2410 Type: 38" ANGLE-12" STEP 13" TIRE-RH Material: Galv Length: 38" Side: Right Hand Steps: 12"

Angles for Single Axle - PK2450-38" ANGLE-8" STEP-LH

SPECS SKU: PK2450 Type: 38" ANGLE-8" STEP 14" TIRE-LH Material: Galv Side: Left Hand Legth: 38" Steps: 8"

Angles for Single Axle - PK2460-38" ANGLE-8" STEP-RH

SPECS SKU: PK2460 Type: 38" ANGLE-8" STEP 14" TIRE-RH Material: Galv Side: Right Hand Length: 38" Steps: 8"

10" Keel Rolls - PQ2060-10"KEEL ROLLER HD-YELLOW

SPECS SKU: PQ2060 Type: 10"KEEL ROLLER HD-YELLOW Color: HD Yellow Length: 10"

10" Keel Rolls - PQ1200-POLY KEEL ROLL 10"

SPECS SKU: PQ1200 Type: POLY KEEL ROLL 10" Color: Orange Length: 10" Hole Size: 5/8" Brand: Stoltz

12" Keel Rolls - PP1550-12" KEEL ROLL 5/8"

SPECS SKU: PP1550 Color: Black Material: Black Rubber Length: 12" Hole Size: 5/8"

12" Keel Rolls - PQ3112-12" KEEL ROLL 5/8" - PVC YELLOW

SPECS SKU: PQ3112 Type: 12" KEEL ROLL 5/8" - PVC YELLOW Color: PVC Yellow Length: 12" Hole Size: 5/8"

12" Keel Rolls - PQ1250-POLY KEEL ROLL

SPECS SKU: PQ1250 Type: POLY KEEL ROLL 12" Color: Orange Length: 12" Hole Size: 5/8" Brand: Stoltz

PQ1255 ~ KEEL ROLLER 12 in (SELF CENTERING)

REPRESENTATION PHOTO MAGIC TILT KEEL ROLLER ~ PQ1255 TYPE: SELF CENTERING KEEL ROLLER COLOR: ORANGE MATERIAL: POLY LENGTH: 12" HOLE SIZE: 5/8" BRAND: STOLTZ DESIGNED TO MAKE CENTERING YOUR BOAT MUCH EASIER WITH EMBEDDED GROOVES THAT CENTER THE BOAT AS IT ROLLS FORWARD. MADE OF EXTREMELY CUT AND WEAR-RESISTANT POLYURETHANE WITH AN ADDED UV INHIBITOR AND WILL NOT DEVELOP FLAT SPOTS OR MARK YOUR BOAT. NOTES: KEEL ROLLERS ARE NOT INTENDED AS WEIGHT-BEARING STRUCTURES BUT AS A GUIDE AND PROTECTIVE DEVICE. WHEN PROPERLY ADJUSTED, THE KEEL SHOULD JUST TOUCH OR JUST CLEAR THE ROLLER. USE WITH PR1550 ROLLER SHAFT, OR PR1560 SHAFT AND TWO PQ1360 END CAPS (NOT INCLUDED)

PR1650 ~ ROLLER SHAFT CAP NUT 5/8"

REPRESENTATION PHOTO MAGIC TILT ROLLER SHAFT CAP NUT ~ PR1650 TYPE: ROLLER SHAFT CAP NUTS DIAMETER: 5/8" FINISH: GALVANIZED SOLD INDIVIDUALLY NOTES: USED WITH VARIOUS KEEL ROLLER MOUNTS AND 5/8" ROLLER SHAFTS

5/8" Shafts - PR1550-5/8"X13-1/2" 12" ROLLER

SPECS SKU: PR1550 Material: Galvanized Diameter: 5/8" Length: 13-1/2" For Roller: 12"

5/8" Shafts - PR1450-5/8"X9-1/2" 8" ROLLER

SPECS SKU: PR1450 Material: Galvanized Length: 9-1/2" For Roller: 8"

5/8" Shafts - PR1500-5/8"X11" 10" ROLLER

SPECS SKU: PR1500 Material: Galvanized Diameter: 5/8" Length: 11" For Roller: 10"

PS1540 ~ ROLLER BRACKET 12" (PONTOON / CAT)

REPRESENTATION PHOTO MAGIC TILT ROLLER BRACKET ~ PS1540 TYPE: PONTOON / CAT ROLLER BRACKET FITS: 2" x 2" TUBE MATERIAL: GALVANIZED MAIN ROLLER LENGTH: 12" MOUNT HOLE SIZE: 3/8" NOTES: CAN BE USED FOR SPLIT-HULL VESSELS (PONTOONS, HOBIE CATS, CATAMARANS) THAT DON'T REQUIRE FULL-LENGTH SUPPORT MOUNTING HARDWARE NOT INCLUDED USES 2-1/2" STRAIGHT ROLLERS (NOT INCLUDED) REPLACEMENT BRACKET FOR PS1550 ASSEMBLY

Roll Brackets - PS1500-TANDEM ROLL BRKT.-12"

SPECS SKU: PS1500 Type: TANDEM ROLL BRKT.-12" STRAIGHT SIDE Material: Galvanized Height: 7-1/4" Length: 12" Hole Size: 1/2" Fits: 12" Roller

PS1110 ~ TONGUE ROLLER BRACKET 5"

REPRESENTATION PHOTO MAGIC TILT TONGUE ROLL BRACKET ~ PS1110 TYPE: TONGUE ROLLER BRACKET SIDE PLATE MATERIAL: GALVANIZED LENGTH: 12" APPLICATION: 5" KEEL ROLLERS WHEN USED IN PAIRS SOLD INDIVIDUALLY

Roll Brackets - PS1180-5" TONGUE BRACKET ONLY

SPECS SKU: PS1180 Type: 5" TONGUE BRACKET ONLY Length: 5"

Galvanized 5 Lug Wheels with Bias Ply Tires - PA2450-T&W SBB (ST205/75D 14C)

SPECS SKU: PA2450 Type: T&W SBB (ST205/75D 14C) 5L GALV Material: Galvanized Tire Size: 205/75/14 Bolt Pattern: 5LX4.5" Load Range: C Brand: Arisun

Galvanized 5 Lug Wheels with Bias Ply Tires - PA2250-T&W SBB (ST175/80D 13C)

SPECS SKU: PA2250 Type: T&W SBB (ST175/80D 13C) 5L GALV Material: Galvanized Tire Size: 175/80D13 Bolt Pattern: 5LX4.5" Load Range: C Max Load: 1360 lbs. Brand: Arisun

Galvanized 5 Lug Wheels with Bias Ply Tires - PA2550-T&W G78X14C (215/75)

SPECS SKU: PA2550 Type: T&W G78X14C (215/75) SPOKE GALV Material: Galvanized Tire Size: 215/75D14 Bolt Pattern: 5LX4.5" Load Range: C Max Load: 1870 lbs. Brand: Arisun

Galvanized 5 Lug Wheels with Bias Ply Tires - PA2950-T&W H78X15D (225/75)

SPECS SKU: PA2950 Type: T&W H78X15D (225/75) 5L SPOKE GALV Material: Galvanized Tire Size: 225/75D15 Bolt Pattern: 5LX4.5" Load Range: D Max Load: 1980 lbs. Brand: Arisun

Galvanized 5 Lug Wheels with Bias Ply Tires - PA1852-T&W 480X12B

SPECS SKU: PA1852 Type: T&W 480X12B GALV 5L Material: Galvanized Tire Size: 480 x 12 Bolt Pattern: 5LX4.5" Load Range: B Max Load: 1980 lbs.

PA1665 ~ TIRE & WHEEL 10" RIM 800x10 GALVANIZED 5-LUG

REPRESENTATION PHOTO MAGIC TILT TIRE & WHEEL ~ PA1665 TYPE: RADIAL TIRE SIZE: 800 x 10 (205/65-10) LOAD RANGE: E BOLT PATTERN: 5 x 4.5" MAXIMUM: 1650 LBS. MATERIAL: GALVANIZED

Galvanized 5 Lug Wheels with Radial Tires - PA3155-T&W ST175/80R 13C

SPECS SKU: PA3155 Type: T&W ST175/80R 13C 5L RADIAL Material: Galvanized Tire Size: ST175/80R13 Bolt Pattern: 5LX4.5" Load Range: C Max Load: 1360 lbs.

Galvanized 5 Lug Wheels with Radial Tires - PA3459-T&W ST205/75 14C

SPECS SKU: PA3459 Type: T&W ST205/75 14C 5L RADIAL Material: Galvanized Tire Size: ST205/75R14 Bolt Pattern: 5LX4.5" Load Range: C Max Load: 1760 lbs. Brand: Rainier

Galvanized 5 Lug Wheels with Radial Tires - PA3463-T&W ST215/75R 14C

SPECS SKU: PA3463 Type: T&W ST215/75R 14C RAINIER RADIAL 5L Material: Galvanized Tire Size: ST215/75R14 Bolt Pattern: 5LX4.5" Load Range: C Max Load: 1870 lbs. Brand: Rainier

Galvanized 6 Lug Wheels with Bias Ply Tires - PA3970-T&W SBB (ST225/75D 15D)

SPECS SKU: PA2970 Type: T&W SBB (ST225/75D 15D) 6L GALV Material: Galvanized Tire Size: 225/75D15 Bolt Pattern: 6Lx5.5" Load Range: D Max Load: 2035 lbs. Brand: Arisun

Galvanized 6 Lug Wheels with Radial Tires - PA3903-T&W ST225/75R 15D

SPECS SKU: PA3903 Type: T&W ST225/75R 15D 6L RADIAL Material: Galvanized Tire Size: ST225/75R15 Bolt Pattern: 6Lx5.5" Load Range: D Max Load: 2540 lbs. Brand: Rainier

PA3908 ~ TIRE & WHEEL 16" RIM ST235/85R16 GALVANIZED 8-LUG

REPRESENTATION PHOTO MAGIC TILT TIRE & WHEEL ~ PA3908 TYPE: RADIAL TIRE SIZE: ST235/85R16 LOAD RANGE: E MAX LOAD: 3960 LBS. BOLT PATTERN: 8 x 6.5" BRAND: RAINIER MATERIAL: GALVANIZED

PA3905 ~ TIRE & WHEEL 16" RIM ST245/75R16 GALVANIZED 8-LUG

REPRESENTATION PHOTO MAGIC TILT TIRE & WHEEL ~ PA3905 TYPE: RADIAL TIRE SIZE: ST245/75R16 LOAD RANGE: E MAX LOAD: 3085 LBS. BOLT PATTERN: 8 x 6.5" BRAND: RAINIER MATERIAL: GALVANIZED

2″x2″ 84″ Track 67″ SC "V" Spring Axles - PH4101-1-AX[V]2X2X84TR 67SC 5L DISC

SPECS SKU: PH4101-1 Type: AX[V]2X2X84TR 67SC 5L DISC Material: Galvanized Capacity: 3500Lbs Hubs: 5 Lug Disc Brakes Spindle/Bearing Size: 1-3/8X1-1/16" Spring Centers: 67" Track: 84" Brand: UFP

2″x2″ 84″ Track 67″ SC "V" Spring Axles - PH4101-AX[V]2X2X84TR 67SC 5L HD W/FLNG

SPECS SKU: PH4101 Type: AX[Vee]2X2X84TR 67SC 5L HD W/FLNG Size: 2" x 2" HD w/ Flange Material: Galvanized Capacity: 3500Lbs Hubs: 5 Lug Spindle/Bearing Size: 1-3/8X1-1/16" Spring Centers: 67" Track: 84" Brand: UFP

2″x2″ 84″ Track 67″ SC "V" Spring Axles - PH4055-AX [V] 2X2X84TRK 67SC 5L ED

SPECS SKU: PH4055 Type: AX [V] 2X2X84TRK 67SC 5L ED Tube Size: 2"x2" Material: Galvanized Capacity: 2500Lbs Hubs: 5 Lug Spindle/Bearing Size: 1-1/16"X1-1/16" Spring Centers: 67" Track: 84" Brand: UFP

2″x2″ 84″ Track 67″ SC "V" Spring Axles - PH4103-AX[V]2X2X84TR 67SC HD W/FLG [NO HUBS]

SPECS SKU: PH4103 Type: AX[Vee]2X2X84TR 67SC HD W/FLG [NO HUBS] Material: Galvanized Capacity: 3500Lbs Hubs: None Spindle/Bearing Size: 1-3/8X1-1/16" Spring Centers: 67" Track: 84"

2″x2″ 84″ Track 67″ SC Straight Axles - PH4100-2X2X84TR 67SC 5L HD W/BRK. FLANG

SPECS SKU: PH4100 Type: Straight 2X2X84TR 67SC 5L HD W/BRK. FLA Size: 2" x 2" Material: Galvanized Capacity: 3500Lbs Hubs: 5 Lug Spindle/Bearing Size: 1-3/8X1-1/16" Spring Centers: 67" Track: 84" Brand: UFP

2″x2″ 91″Track 73″SC "V" Spring Axles - PH4715-2X2X91TR 73SC 5L HD

SPECS SKU: PH4715 Type: AX [V] 2X2X91TR 73SC 5L HD Tube Size: 2"x2" Material: Galvanized Capacity: 3500Lbs Hubs: 5 Lug Bearings/Bearing Size: 1-3/8X1-1/16" Spring Centers: 73" Track: 91"

2″x2″ 91″Track 73″SC "V" Spring Axles - PH4716-2X2X91TR 73SC HD [NO HUBS]

SPECS SKU: PH4716 Type: AX [V] 2X2X91TR 73SC HD [NO HUBS] Tube Size: 2"X2" Material: Galvanized Capacity: 3500Lbs Hubs: None Spindle/Bearing Size: 1-3/8X1-1/16" Spring Centers: 73" Track: 91" Brand: UFP

2″x2″ 91″Track 73″SC "V" Spring Axles - PH4723-2X2X91TR-73SC 5L ED

SPECS SKU: PH4723 Type: AX [V] 2X2X91TR-73SC 5L ED Tube Size: 2"x2" Material: Galvanized Hubs: 5 Lug Bearings/Bearing Size: 1-1/16"X1-1/16" Spring Centers: 73" Track: 91"

2″x2″ 91″Track 73″SC "V" Spring Axles - PH4718-2X2X91TR 73SC 5L DISC

SPECS SKU: PH4718 Type: AX[V]2X2X91TR 73SC 5L DISC BRAKE Material: Galvanized Capacity: 3500Lbs Hubs: 5 Lug W/Disc Brakes Spindle/Bearing Size: 1-3/8X1-1/16" Spring Centers: 73" SC Track: 91" Brand: UFP

2″x2″ 91″Track 73″SC Straight Axles - PH4715-3 -2X2X91TR 73SC 5L HD

SPECS SKU: PH4715-3 Type: AX [STR] 2X2X91TR 73SC 5L HD Material: Galvanized Capacity: 3500Lbs Hubs: 5 Lug Spindle/Bearing Size: 1-3/8X1-1/16" Spring Centers: 73" SC Track: 91" Brand: UFP

2″x2″ 91″Track 73″SC Straight Axles - PH4716-3 -2X2X91TR 73SC HD [NO HUBS]

SPECS SKU: PH4716-3 Type: AX [STR] 2X2X91TR 73SC HD [NO HUBS] Tube Size: 2"X2" Material: Galvanized Capacity: 3500Lbs Hubs: None Spindle/Bearing Size: 1-3/8X1-1/16" Spring Centers: 73" Track: 91" Brand: UFP

2″x2″ 93″Track 77″SC "V" Spring Axles - PH6004-1 -2X2X93TR 77 SC 5L DISC

SPECS SKU: PH6004-1 Type: AX [V] 2X2X93TR 77 SC 5L DISC Material: Galvanized Capacity: 3500Lbs Hubs: 5 Lug W/Disc Brakes Spindle/Bearing Size: 1-3/8X1-1/16" Spring Centers: 77" SC Track: 93" Brand: UFP

2″x2″ 93″Track 77″SC "V" Spring Axles - PH6004 -2X2X93TR 77 SC 5L HD

SPECS SKU: PH6004 Type: AX [V] 2X2X93TR 77 SC 5L HD Material: Galvanized Capacity: 3500Lbs Hubs: 5 Lug Spindle/Bearing Size: 1-3/8"X1-1/16" Spring Centers: 77" SC Track: 93" Brand: UFP

2″x2″ 93″Track 77″SC "V" Spring Axles - PH6006 -2X2X93TR 77 SC 5L ED

SPECS SKU: PH6006 Type: AX [V] 2X2X93TR 77 SC 5L ED Tube Size: 2"x2" Material: Galvanized Hubs: 5 Lug Spindle/Bearing Size: 1-1/16"X1-1/16" Spring Centers: 77" SC Track: 93" Brand: UFP

2"x2" 93" Track 77"SC Straight Spring Axles - PH4760 - 2X2X93TR 77SC 5L HD

SPECS SKU: PH4760 Type: AX [STR] 2X2X93TR 77SC 5L HD Material: Galvanized Capacity: 3500Lbs Hubs: 5 Lug Spindle/Bearing Size: 1-3/8X1-1/16" Spring Centers: 77" Track: 93" Brand: UFP

2"x2" 93" Track 77"SC Straight Spring Axles - PH4770-1 - 2X2X93TR 77SC HD W/FLG [NO HUBS]

SPECS SKU: PH4770-1 Type: AX 2X2X93TR 77SC HD W/FLG [NO HUBS] Tube Size: 2"X2" Material: Galvanized Capacity: 3500 Lbs Hubs: None Spindle/Bearing Size: 1-3/8X1-1/16" Spring Centers: 77" SC Track: 93" Brand: UFP

2″x2″ 93″ Track 77.5″ SC "V" Spring Axles - PH4809 - 2X2X93TR 77.5SC 5L DISC

SPECS SKU: PH4809 Type: AX[V]2X2X93TR 77.5SC 5L DISC Material: Galvanized Capacity: 3500Lbs Hubs: 5 Lug W/Disc Brakes Spindle/Bearing Size: 1-3/8X1-1/16" Spring Centers: 77.5" SC Track: 93" Brand: UFP

2″x2″ 93″ Track 77.5″ SC "V" Spring Axles - PH4810 - 2X2X93TR 77.5 SC 5L HD

SPECS SKU: PH4810 Type: AX[V] 2X2X93TR 77.5 SC 5L HD Material: Galvanized Capacity: 3500Lbs Hubs: 5 Lug Spindle/ Bearing Size: 1-3/8"X1-1/16" Spring Centers: 77.5" SC Track: 93" Brand: UFP

2″x2″ 93″ Track 77.5″ SC "V" Spring Axles - PH4811- 2X2X93TR 77.5SC HD [NO HUBS]

SPECS SKU: PH4811 Type: AX [V] 2X2X93TR 77.5SC HD W/FLG [NO HUBS] Material: Galvanized Capacity: 3500Lbs Hubs: None Spindle/Bearing Size: 1-3/8X1-1/16" Spring Centers: 77-1/2" Track: 93"

2″x2″ 93″ Track 77.5″SC Straight Spring Axles - PH4810-1- 2X2X93TR 77.5 SC 5L HD

SPECS SKU: PH4810-1 Type: AX[STR]2X2X93TR 77.5 SC 5L HD Material: Galvanized Capacity: 3500Lbs Hubs: 5 Lug Spindle/Bearing Size: 1-3/8X1-1/16" Spring Centers: 77.5" SC Track: 93" Brand: UFP

2″x2″ 71″ Track 57-3/8″SC Straight Spring Axles - PH2900 -2X2X71TR 57-3/8 SC 5L HD

SPECS SKU: PH2900 Type: AX 2X2X71TR 57-3/8 SC 5L HD W/FLANG Tube Size:2" x 2" Material: Galvanized Capacity: 3500Lbs Hubs: 5 Lug Spindle/Bearing Size: 1-3/8X1-1/16" Spring Centers: 57-3/8" Track: 71" Brand: UFP

2″x2″ 71″ Track 57-3/8″SC Straight Spring Axles - PH2800 -2X2X71TR 57 3/8SC 5L ED

SPECS SKU: PH2800 Type: AX[STR]2X2X71TR 57 3/8SC 5L ED Tube Size: 2"x2" Material: Galvanized Capacity: 2500Lbs Hubs: 5 Lug Spindle/Bearing Size: 1-1/16"X1-1/16" Spring Centers: 57-3/8" Track: 71" Brand: UFP

2″x2″ 71″ Track 57-3/8″SC Straight Spring Axles - PH2901 - 2X2X71TR 57-3/8SC HD[NO HUBS]

SPECS SKU: PH2901 Type: AX 2X2X71TR 57-3/8SC HD W/FLG[NO HUBS] Tube Size: 2"X2" Material: Galvanized Capacity: 3500Lbs Hubs: None Spindle/Bearing Size: 1-3/8X1-1/16" Spring Centers: 57-3/8" Track: 71" Brand: UFP

2″x2″ 71″ Track 57-3/8″SC Straight Spring Axles - PH2763 -2X2X71TR 57-3/8SC ED [NO HUBS]

SPECS SKU: PH2763 Type: AX[STR]2X2X71TR 57-3/8SC ED NO HUBS Tube Size: 2"X2" Material: Galvanized Capacity: 2500Lbs Hubs: None Spindle/Bearing Size: 1-1/16"X1-1/16" Spring Centers: 57-3/8SC Track: 71TR Brand: UFP

2″x2″ 81.5″ Track 68-3/8″ SC "V" Spring Axles - PH4033- 2X2X81.5TR 68-3/8 W/FLG [No Hubs]

SPECS SKU: PH4033 Type: AX[V]2X2X81.5TR 68-3/8 HD W/FLG [NO HUBS] Tube Size: 2" x 2" Material: Galvanized Capacity: 3500Lbs Hubs: None Spindle/Bearing Size: 1-3/8"X1-1/16" Spring Centers: 68-3/8" SC Track: 81-1/2" Brand: UFP

2″x2″ 81.5″ Track 68-3/8″ SC "V" Spring Axles - PH4021- 2X2X81.5TR 68-3/8SC 5LHD

SPECS SKU: PH4021 Type: AX[V]2X2X81.5TR 68-3/8SC 5LHD W/FLG Tube Size: 2" x 2" Material: Galvanized Capacity: 3500Lbs Hubs: 5 Lug Spindle/Bearing Size: 1-3/8"X1-1/16" Spring Centers: 68-3/8" SC Track: 81-1/2" Brand: UFP

2″x2″ 81.5″ Track 68-3/8″ SC "V" Spring Axles - PH4011- 2X2X81.5TR 68-3/8SC 5L ED

SPECS SKU: PH4011 Type: AX[V] 2X2X81.5TR 68-3/8SC 5L ED Tube Size: 2"x2" Material: Galvanized Capacity: 2500Lbs Hubs: 5 Lug Spindle/Bearing Size: 1-1/16"X1-1/16" Spring Centers: 68-3/8" Track: 81-1/2" Brand: UFP

2″x2″ 84″ Track 68″ SC "V" Spring Axles - PH4112 - 2X2X84TR 68SC 5LHD

SPECS SKU: PH4112 Type: AX [V] 2X2X84TR 68SC 5LHD W/FLNG Tube Size: 2" x 2" Material: Galvanized Capacity: 3500Lbs Hubs: 5 Lug Spindle/Bearing Size: 1-3/8X1-1/16" Spring Centers: 68" SC Track: 84" Brand: UFP

2″x2″ 84″ Track 68″SC Straight Spring Axles - PH4099- 2X2X84TR 68SC 5L HD

SPECS SKU: PH4099 Type: AX 2X2X84TR 68SC 5L HD W/BRK. FLANG Material: Galvanized Capacity: 3500Lbs Hubs: 5 Lug Spindle/Bearing Size: 1-3/8X1-1/16" Spring Centers: 68" Track: 84" Brand: UFP

2″x2″ 84″ Track 68″SC Straight Spring Axles - PH4098- 2X2X84TR 68SC [NO HUBS]

SPECS SKU: PH4098 Type: AX 2X2X84TR 68SC HD W/FLG [NO HUBS] Material: Galvanized Capacity: 3500 Lbs Hubs: None Spindle/Bearing Size: 1-3/8X1-1/16" Spring Centers: 68" Track: 84" Brand: UFP

2″x2″ 86.5″Track 73-3/8″SC "V" Spring Axles - PH3251 -2X2X86.5TR 73-3/8SC 5LHD

SPECS SKU: PH3251 Type: AX[V]2X2X86.5TR 73-3/8SC 5LHD W/FLG Material: Galvanized Capacity: 3500Lbs Hubs: 5 Lug Spindle/Bearing Size: 1-3/8X1-1/16" Spring Centers: 73-3/8" Track: 86-1/2" Brand: UFP

2″x2″ 86.5″Track 73-3/8″SC "V" Spring Axles - PH3201-2X2X86.5TR 73-3/8SC 5L ED

SPECS SKU: PH3201 Type: AX [V] 2X2X86.5TR 73-3/8SC 5L ED Material: Galvanized Capacity: 2500Lbs Hubs: 5 Lug Spindle/Bearings Size: 1-1/16"X1-1/16" Spring Centers: 73-3/8" Track: 86-1/2"

2″x2″ 86.5″Track 73-3/8″SC "V" Spring Axles - PH3254- 2X2X86.5TR 73-3/8SC HD[NO HUBS]

SPECS SKU: PH3254 Type: AX[V]2X2X86.5TR 73-3/8SC HD W/FLG [NO HUBS] Material: Galvanized Capacity: 3500Lbs Hubs: None Spindle/Bearing Size: 1-3/8X1-1/16" Spring Centers: 73-3/8" Track: 86.5"

2″x2″ 86.5″Track 73-3/8″SC "V" Spring Axles - PH3203- 2X2X86.5TR 73-3/8SC ED(NO HUBS)

SPECS SKU: PH3203 Type: AX[V]2X2X86.5TR 73-3/8SC ED (NO HUBS) Material: Galvanized Capacity: 2500Lbs Hubs: None Spindle/Bearing Size: 1-1/16"X1-1/16" Spring Centers: 73-3/8" SC Track: 86.5" Brand: UFP

2″x2″ 86.5″ Track 77 3/8″SC Straight Spring Axles - PH3211- 2X2X86.5TR 73-3/8[NO HUBS]

SPECS SKU: PH3211 Type: AX 2X2X86.5TR 73-3/8 HD W/FLG[NO HUBS] Material: Galvanized Hubs: NONE Spindle/Bearing Size: 1-3/8X1-1/16" Spring Centers: 73-3/8 Track: 86.5TR Brand: UFP

2″x2″ 86.5″ Track 77 3/8″SC Straight Spring Axles - PH3210- 2X2X86.5TR 73-3/8SC 5L HD

SPECS SKU: PH3210 Type: AX 2X2X86.5TR 73-3/8SC 5L HD W/FLAN Material: Galvanized Hubs: 5 Lug Spindle/Bearing Size: 1-3/8X1-1/16" Spring Centers: 73-3/8SC Track: 86.5TR Brand: UFP

2″x2″ 86.5″ Track 77 3/8″SC Straight Spring Axles - PH3200- 2X2X86.5TR 73-3/8SC 5L ED

SPECS SKU: PH3200 Type: AX 2X2X86.5TR 73-3/8SC 5L ED Material: Galvanized Capacity: 2500Lbs Hubs: 5 Lug Spindle/Bearing Size: 1-1/16"X1-1/16" Spring Centers: 73-3/8" Track: 86-1/2" Brand: UFP

2″x2″ 93.5″ Track 80-3/8″SC Straight Spring Axles - PH4700-1 -2X2X93.5TR 80-3/8 SC 5L DISC

SPECS SKU: PH4700-1 Type: AX 2X2X93.5TR 80-3/8 SC 5L DISC Material: Galvanized Capacity: 3500Lbs Hub Size: 5 Lug Disc Brakes Spindle/Bearing Size: 1-3/8X1-1/16" Spring Centers: 80-3/8" Track: 93.5" Brand: UFP

2″x2″ 93.5″ Track 80-3/8″SC Straight Spring Axles - PH4700 - 2X2X93.5TR 80-3/8 SC 5L HD

SPECS SKU: PH4700 Type: AX 2X2X93.5TR 80-3/8 SC 5L HD W/FLA Material: Galvanized Capacity: 3500Lbs Hubs: 5 Lug Spindle/Bearing Size: 1-3/8X1-1/16" Spring Centers: 80-3/8" Track: 93-1/2" Brand: UFP

2″x2″ 93.5″ Track 80-3/8″SC Straight Spring Axles - PH4705- 2X2X93.5TR 80-3/8SC[NO HUBS]

SPECS SKU: PH4705 Type: AX 2X2X93.5TR 80-3/8SC HD W/FLG [NO HUBS] Material: Galvanized Capacity: 3500 Lbs Hubs: None Spindle/Bearing Size: 1-3/8X1-1/16" Spring Centers: 80-3/8" Track: 93-1/2" Brand: UFP

2″x2″ 93″ Track 78.5″SC "V" Spring Axles - PH6016-1 - 2X2X93TR 78-1/2" SC 5L DISC

SPECS SKU: PH6016-1 Type: AX[V] 2X2X93TR 78-1/2" SC 5L DISC Material: Galvanized Capacity: 3500Lbs Hub Size: 5 Lug Disc Brakes Spindle/Bearing Size: 1-3/8X1-1/16" Spring Centers: 78-1/2" Center to Center Track: 93" Brand: UFP

2″x2″ 93″ Track 78.5″SC "V" Spring Axles - PH6016 - 2X2X93TR 78-1/2" SC 5L HD

SPECS SKU: PH6016 Type: AX[V] 2X2X93TR 78-1/2" SC 5L HD Material: Galvanized Capacity: 3500Lbs Hubs: 5 Lug Spindle/Bearings:1-3/8X1-1/16" Spring Centers: 79" Track: 93"

2″x2″ 93″ Track 78.5″SC "V" Spring Axles - PH6015- 2X2X93TR 78.5SC HD[NO HUBS]

SPECS SKU: PH6015 Type: AX [V]2X2X93TR 78.5SC HD W/FLG [NO HUBS] Material: Galvanized Capacity: 3500Lbs Hubs: None Spindle/Bearings: 1-3/8X1-1/16" Spring Centers: 79" Track: 93" Brand: UFP

2″x2″ 95″ Track 78.5″SC "V" Spring Axles - PH6022 -2X2X95TR 78-1/2" SC 5L HD

SPECS SKU: PH6022 Type: AX[V] 2X2X95TR 78-1/2" SC 5L HD Material: Galvanized Capacity: 3500Lbs Hubs: 5 Lug Spindle/Bearings: 1-3/8"X1-1/16" Spring Centers: 78-1/2" SC Track: 95" Brand: UFP

2″x2″ 95″ Track 78.5″SC "V" Spring Axles - PH6023- 2X2X95TR 78.5SC HD[NO HUBS]

SPECS SKU: PH6023 Type: AX [V]2X2X95TR 78.5SC HD W/FLG [NO HUBS] Material: Galvanized Capacity: 3500Lbs Hubs: None Spindle/Bearings: 1-3/8X1-1/16" Spring Centers: 78.5" SC Track: 95" Brand: UFP

2″x2″ 87″ Track 73-3/8″SC "V" Spring Axles - PH3251-1- 2X2X87TR 73-3/8SC 5L HD

SPECS SKU: PH3251-1 Type: AX[V]2X2X87TR 73-3/8SC 5L HD W/FLNG Material: Galvanized Capacity: 3500Lbs Hubs: 5 Lug Spindle/Bearings: 1-3/8"X1-1/16" Spring Centers: 73-3/8" SC Track: 87" Brand: UFP

2″x2″ 87″ Track 73-3/8″SC "V" Spring Axles - PH3254-1- 2X2X87TR 73-3/8SC HD[NO HUBS]

SPECS SKU: PH3254-1 Type: AX[V]2X2X87TR 73-3/8SC HD W/FLG [NO HUBS] Material: Galvanized Capacity: 3500Lbs Hubs: None Spindle/Bearings: 1-3/8X1-1/16" Spring Centers: 73-3/8" Track: 87" Brand: UFP

2″x3″ 93″ Track 75″SC "V" Spring Axles - PH4740-1 - 2X3X93TR 75SC 6L

SPECS SKU: PH4740-1 Type: AX [V] 2X3X93TR 75SC 6L W/LG FLNG Material: Galvanized Hubs: 6 Lug Spindle/Bearings: 1-1/4 X 1-3/4" Spring Centers: 75" Track: 93" Brand: UFP

2″x3″ 93″ Track 75″SC "V" Spring Axles - PH4742-1 - 2X3X93TR 75SC 8L

SPECS SKU: PH4742-1 Type: AX [V] 2X3X93TR 75SC 8L W/LG FLANGE Hubs: 8 Lug Spindle/Bearings: 1-1/4X1-3/4 Spring Centers: 75" Track: 93"

2″x3″ 93″ Track 75″SC "V" Spring Axles - PH4741 - 2X3X93TR 75SC [NO HUBS

SPECS SKU: PH4741 Type: AX[V]2X3X93TR 75SC [NO HUBS 1-3/4"] Material: Galvanized Capacity: 5200Lbs Hubs: None Spindle/Bearings: 1-3/4X1-1/4" Spring Centers: 75" Track: 93" Brand: UFP

2″x3″ 93″ Track 75″SC "V" Spring Axles - PH4739 -2X3X93TR 75SC 6L DISC

SPECS SKU: PH4739 Type: AX [V] 2X3X93TR 75SC 6L DISC BRK Material: Galvanized Hubs: 6 Lug Disc Brakes Spindle/Bearings: 1-1/4 X 1-3/4" Spring Centers: 75" Track: 93" Brand: UFP

2″x3″ 93″ Track 75″SC "V" Spring Axles - PH4742-2 - 2X3X93TR 75SC 8L DISC

SPECS SKU: PH4742-2 Type: AX [V] 2X3X93TR 75SC 8L DISC BRK Material: Galvanized Hubs: 8 Lug Disc Brakes Spindle/Bearings: 1-1/4 X 1-3/4" Spring Centers: 75" Track: 93" Brand: UFP

2″x3″ 93″ Track 75″SC "V" Spring Axles - PH4735 - 2X3X93TR 75SC 5L

SPECS SKU: PH4735 Type: AX [V] 2X3X93TR 75SC 5LHD W/FLNG Material: Galvanized Hubs: 5 Lug Spindle/Bearings: 1-3/8"X1-1/16" Spring Centers: 75" Track: 93" Brand: UFP

2″x3″ 93″ Track 76″SC "V" Spring Axles - PH4771-1 - 2X3X93TR 76SC 6L DISC

SPECS SKU: PH4771-1 Type: AX [V] 2X3X93TR 76SC 6L DISC Material: Galvanized Hubs: 6 Lug Disc Brakes Spindle/Bearings: 1-1/4 X 1-3/4" Spring Centers: 76" Track: 93" Brand: UFP

2″x3″ 93″ Track 76″SC "V" Spring Axles - PH4776 - 2X3X93TR 76SC 5L DISC

SPECS SKU: PH4776 Type: AX [V]2X3X93TR 76SC 5L DISC BRK Material: Galvanized Hubs: 5 Lug Disc Brakes Spindle/Bearings: 1-3/8X1-1/16" Spring Centers: 76" Track: 93" Brand: UFP

2″x3″ 93″ Track 76″SC "V" Spring Axles - PH4771 - 2X3X93TR 76SC 6L

SPECS SKU: PH4771 Type: AX [V] 2X3X93TR 76SC 6L Material: Galvanized Hubs: 6 Lug Spindle/Bearings: 1-1/4 X 1-3/4" Spring Centers: 76" Track: 93" Brand: UFP

2″x3″ 93″ Track 76″SC "V" Spring Axles - PH4774 - 2X3X93TR 76SC 5LHD

SPECS SKU: PH4774 Type: AX[V] 2X3X93TR 76SC 5LHD W/FLNG Material: Galvanized Capacity: 3500Lbs Hubs: 5 Lug Spindle/Bearings: 1-3/8"X1-1/16" Spring Centers: 76" Track: 93" Brand: UFP

2″x3″ 93″ Track 76″SC "V" Spring Axles - PH4772 - 2X3X93TR 76SC [NO HUBS]

SPECS SKU: PH4772 Type: AX[V]2X3X93TR 76SC [NO HUBS 1-3/4"] Material: Galvanized Capacity: 5200Lbs Hubs: None Spindle/Bearings: 1-3/4X1-1/4" Spring Centers: 76" Track: 93" Brand: UFP

2″x3″ 93″ Track 76″SC "V" Spring Axles - PH4769 - 2X3X93TR 76SC [NO HUBS]

SPECS SKU: PH4769 Type: AX [V] 2X3X93TR 76SC HD [NO HUBS] Material: Galvanized Capacity: 3500Lbs Hubs: None Spindle/Bearings: 1-3/8"X1-1/16" Spring Centers: 76" Track: 93" Brand: UFP

2″x3″ 93″ Track 76.5″SC "V" Spring Axles - PH4778 - 2X3X93TR 76.5SC 5L DISC

SPECS SKU: PH4778 Type: AX[V]2X3X93TR 76.5SC 5L DISC BRK Material: Galvanized Hubs: 5 Lug Disc Brakes Spindle/Bearings: 1-3/8X1-1/16" Spring Centers: 76-1/2" Track: 93" Brand: UFP

2″x3″ 93″ Track 76.5″SC "V" Spring Axles - PH4777 - 2X3X93TR 76.5SC 5L HD

SPECS SKU: PH4777 Type: AX[V]2X3X93TR 76.5SC 5L HD W/FLAN Material: Galvanized Capacity: 3500Lbs Hubs: 5 Lug Spindle/Bearings: 1-3/8"X1-1/16" Spring Centers: 76-1/2" Track: 93" Brand: UFP

2″x3″ 93″ Track 78.5″SC "V" Spring Axles - PH6017 - 2X3X93TR 78.5SC HD[NO HUBS]

SPECS SKU: PH6017 Type: AX [V]2X3X93TR 78.5SC HD W/FLG [NO HUBS] Material: Galvanized Capacity: 3500Lbs Hubs: None Spindle/Bearings: 1-3/8"X1-1/16" Spring Centers: 79" Track: 93" Brand: UFP

2″x3″ 93″ Track 78.5″SC "V" Spring Axles - PH6018 - 2X3X93TR 78.5 SC 5L HD

SPECS SKU: PH6018 Type: AX [V] 2X3X93TR 78.5 SC 5L HD W/FLA Material: Galvanized Capacity: 3500Lbs Hubs: 5 Lug Spindle/Bearings: 1-3/8"X1-1/16" Spring Centers: 79" Track: 93" Brand: UFP

2″x3″ 93″ Track 75″SC Straight Spring Axles - PH4990 - 2X3X93TR 75SC HD [NO HUBS]

SPECS SKU: PH4990 Type: AX 2X3X93TR 75SC HD W/FLG [NO HUBS] Material: Galvanized Capacity: 3500Lbs Hubs: None Spindle/Bearings: 1-3/8"X1-1/16" Spring Centers: 75" Track: 93" Brand: UFP

2″x3″ 93″ Track 75″SC Straight Spring Axles - PH4773 - 2X3X93TR 75SC[NO HUBS 1-3/4"]

SPECS SKU: PH4773 Type: AX 2X3X93TR 75SC [NO HUBS 1-3/4"] Material: Galvanized Capacity: 5200Lbs Hubs: None Spindle/Bearings: 1-3/4X1-1/4" Spring Centers: 75" SC Track: 93" Brand: UFP

BOW REST ASSY W/BMPR - PO1997-SWIVLE 2-PC BOW REST ASSY

SPECS SKU: PO1997 Type: SWIVEL 2-PC BOW REST ASSY.W/BMPR Material: Galvanized Height: Adj Post up to 24"

PO2020 ~ WINCH POST ASSEMBLY 48" SUPER HEAVY-DUTY

REPRESENTATION PHOTO MAGIC TILT WINCH POST ASSEMBLY ~ PO2020 TYPE: SUPER HEAVY-DUTY WINCH POST W/ SEAT & STOP MATERIAL: GALVANIZED POST SIZE: 3" x 4" x 48" FITS: 3" WIDE TONGUE TUBE LENGTH: 48" SLOPE: 30-DEGREES FROM VERTICAL (APPROX) NOTES: TONGUE MOUNTING HARDWARE AND WINCH NOT INCLUDED USES PO2180 WINCH POST, PO2191 WINCH SEAT, PO1976 BOW REST

BOW REST ASSY W/BMPR - PO1977-BOW REST ASSY.W/BMPR

SPECS SKU: PO1977 Type: Pinnacle 2PC Bow Rest Assy w/bumper Material: Galvanized Height: Adj Post up to 24" Mounts: at a 45° angle

BOW REST ASSY W/BMPR - PO1977N-BOW REST ASSY. NARROW W/BMPR

SPECS SKU: PO1977N Type: PINNACLE 2-PC BOW REST ASSY. NARROW W/BMPR Material: Galvanized Height: Adj Post up to 24" Mounts: at a 45° angle

BOW REST ASSY W/BMPR - PO1976-BOW REST TOP W/BMPR

SPECS SKU: PO1976 Type: PINNACLE- BOW REST TOP W/BMPR Material: Galvanized Height: 25"

BOW REST ASSY W/BMPR - PO1976N-BOW REST TOP NARROW W/BMPR

SPECS SKU: PO1976N Type: PINNACLE 2-PC BOW REST TOP NARROW W/BMPR Material: Galvanized Height: 25" Length: 8-1/2" wide on top

Ladders - PO2860 - ALUM TONGUE MOUNTED ASSY

SPECS SKU: PO2860 Type: LADDER ALUM TONGUE MOUNTED ASSY Material: Alum Height: 28" From the top of the Tongue to the top step. Brand: MT Comes with Hardware to mount

Bow Stop Rollers - PQ2010 - 3" Bow Roller-YELLOW

SPECS SKU: PQ2010 Color: Yellow Length: 3" Hole Size: 1/2"

Bow Stop Rollers - PQ3000 - 4" Bow Roller-PVC YELLOW

SPECS SKU: PQ3000 Type: 4" BOW STOP ROLLER - PVC YELLOW Size: 4" BOW STOP ROLLER Color: PVC YELLOW Height: 4" Hole Size: 1/2"

Bow Stop Rollers - PQ3010 - 3" Bow Roller-PVC YELLOW

SPECS SKU: PQ3010 Type: 3" BOW STOP ROLLER - PVC YELLOW Size: 3" BOW STOP ROLLER Color: PVC YELLOW Width: 3" Hole Size: 1/2"

Bow Stop Rollers - PQ1050 - Poly Bow Roller-3"

SPECS SKU: PQ1050 Type: POLY BOW STOP-REG. 3" Width: 3" Hole Size: 1/2"

Bow Stop Rollers - PQ1052 - Poly Bow Roller- 4"

SPECS SKU: PQ1052 Type: 4" POLY BOW STOP Width: 4" Hole Size: 1/2"

Bow Stop Rollers - PP1060 - 4" Bow Roller

SPECS SKU: PP1060 Type: 4" BOW STOP ROLLER Size: 4" ROLLER Color: Black Material: Heavy Duty Rubber Length: 4" Hole Size: 1/2" Brand: Yates

Bow Stop Rollers - PP1050 - 3" Bow Roller

SPECS SKU: PP1050 Material: Rubber Length: 3" Hole Size: 1/2"

Bow Stop Rollers - PQ2000 - 4" Bow Roller-YELLOW

SPECS SKU: PQ2000 Type: 4" BOW STOP ROLLER-YELLOW Size: 4" BOW STOP ROLLER Color: YELLOW Height: 4" Hole Size: 1/2"

2″x3″ 84″ Track 67″SC "V" Spring Axles - PH4106-1 - 2X3X84TR 67SC 5L HD DISC

SPECS SKU: PH4106-1 Type: AX[V]2X3X84TR 67SC 5L HD DISC Material: Galvanized Hubs: 5L Disc Brake Spindle/Bearings: 1-3/8X1-1/16 Spring Centers: 67" Track: 84" Brand: UFP

2″x3″ 84″ Track 67″SC "V" Spring Axles - PH4106 - 2X3X84TR 67SC 5L HD

SPECS SKU: PH4106 Type: AX[V]2X3X84TR 67SC 5L HD W/FLNG Material: Galvanized Hubs: 5 Lug Spindle/Bearings: 1-3/8"X1-1/16" Spring Centers: 67" Track: 84" Brand: UFP

2″x3″ 84″ Track 67″SC "V" Spring Axles - PH4108 - 2X3X84TR 67SC [NO HUBS]

SPECS SKU: PH4108 Type: AX[V]2X3X84TR 67SC HD W/FLG [NO HUBS] Material: Galvanized Hubs: 5 Lug Spindle/Bearings: 1-3/8"X1-1/16" Spring Centers: 67" Track: 84" Brand: UFP

2″x3″ 86″ Track 67″SC "V" Spring Axles - PH4301-1 -2X3X86TR 67SC 6L DISC

SPECS SKU: PH4301-1 Type: AX [V] 2X3X86TR 67SC 6L DISC Material: Galvanized Hubs: 6 Lug Disc Brakes Spindle/Bearings: 1-1/4 X 1-3/4" Spring Centers: 67" Track: 86" Brand: UFP

2″x3″ 86″ Track 67″SC "V" Spring Axles - PH4301 - 2X3X86TR 67SC 6L

SPECS SKU: PH4301 Type: AX [V] 2X3X86TR 67SC 6L Material: Galvanized Hubs: 6 Lug Spindle/Bearings: 1-1/4 X 1-3/4" Spring Centers: 67" Track: 86" Brand: UFP

2″x3″ 86″ Track 67″SC "V" Spring Axles - PH4303 - 2X3X86TR 67SC [NO HUBS]

SPECS SKU: PH4303 Type: AX[V]2X3X86TR 67SC [NO HUBS 1-3/4"] Material: Galvanized Capacity: 5200Lbs Hubs: None Spindle/Bearings: 1-3/4X1-1/4" Spring Centers: 67" Track: 86" Brand: UFP

2″x3″ 91″ Track 73″SC "V" Spring Axles - PH4730 - 2X3X91TR 73SC 6L

SPECS SKU: PH4730 Type: AX [V] 2X3X91TR 73SC 6L Material: Galvanized Hubs: 6 Lug Spindle/Bearings: 1-1/4 X 1-3/4 Spring Centers: 73" Track: 91" Brand: UFP

2″x3″ 91″ Track 73″SC "V" Spring Axles - PH4725 - 2X3X91TR 73SC 5L HD

SPECS SKU: PH4725 Type: AX [V] 2X3X91TR 73SC 5LHD W/FLNG Material: Galvanized Hubs: 5 Lug Spindle/Bearings: 1-3/8"X1-1/16" Spring Centers: 73" Track: 91" Brand: UFP

2″x3″ 91″ Track 73″SC "V" Spring Axles - PH4731 - 2X3X91TR 73SC [NO HUBS]

SPECS SKU: PH4731 Type: AX[V]2X3X91TR 73SC [NO HUBS 1-3/4"] Material: Galvanized Capacity: 5200Lbs Hubs: None Spindle/Bearings: 1-3/4X1-1/4" Spring Centers: 73" Track: 91" Brand: UFP

2″x3″ 91″ Track 73″SC "V" Spring Axles - PH4726 - 2X3X91TR 73SC [NO HUBS]

SPECS SKU: PH4726 Type: AX[V]2X3X91TR 73SC HD W/FLG [NO HUBS] Material: Galvanized Capacity: 3500Lbs Hubs: None Spindle/Bearings: 1-3/8"X1-1/16" Spring Centers: 73" SC Track: 91" Brand: UFP

2″x3″ 93.5″ Track 80-3/8″SC "V" Spring Axles - PH4754-1 - 2X3X93.5TR 80-3/8SC 5LHD

SPECS SKU: PH4754-1 Type: AX[V]2X3X93.5TR 80-3/8SC 5LHD W/FLG Material: Galvanized Hubs: 5 Lug Spindle/Bearings: 1-3/8"X1-1/16" Spring Centers: 80-3/8" Track: 93-1/2" Brand: UFP

2″x3″ 93.5″ Track 80-3/8″SC "V" Spring Axles - PH4754-2 - 2X3X93.5TR 80-3/8SC[NO HUBS]

SPECS SKU: PH4754-2 Type: AX[V]2X3X93.5TR 80-3/8SC HD W/FLG-[NO HUBS] Material: Galvanized Hubs: NONE Spindle/Bearings: 1-3/8"X1-1/16" Spring Centers: 80-3/8" Track: 93.5" Brand: UFP

2″x3″ 95″ Track 76″SC "V" Spring Axles - PH4764 - 2X3X95TR 76SC 6L

SPECS SKU: PH4764 Type: AX [V] 2X3X95TR 76SC 6L 1-3/4 Material: Galvanized Hubs: 6 Lug Spindle/Bearings: 1-1/4 X 1-3/4" Spring Centers: 76" SC Track: 95" Brand: UFP

2″x3″ 95″ Track 76″SC "V" Spring Axles - PH4758 - 2X3X95TR 76SC 5L

SPECS SKU: PH4758 Type: AX [V] 2X3X95TR 76SC HD W/FLNG Material: Galvanized Capacity: 3500Lbs Hubs: None Spindle/Bearings: 1-3/8"X1-1/16" Spring Centers: 76" Track: 95" Brand: UFP

2″x3″ 93″ Track 86″SC Straight Spring Axles - PH4350 - 2X3X86TR 67SC 6L

SPECS SKU: PH4350 Type: AX 2X3X86TR 67SC 6L 1-3/4 Drum Brk Hubs: 6 Lug Drum Brakes Spindle/Bearings: 1-3/4X1-1/4" Spring Centers: 67" Track: 86"

2″x3″ 93″ Track 86″SC Straight Spring Axles - PH4202 - 2X3X86TR 67SC 5L[No Hubs]

SPECS SKU: PH4202 Type: AX 2X3X86TR 67SC 5LHD W/FLG [NO HUBS] Material: Galvanized Capacity: 3500Lbs Hubs: None Spindle/Bearings: 1-3/8"X1-1/16" Spring Centers: 67" Track: 86" Brand: UFP

2″x3″ 93″ Track 86″SC Straight Spring Axles - PH4302 - 2X3X86TR 67SC[No Hubs]

SPECS SKU: PH4302 Type: AX 2X3X86TR 67SC [NO HUBS 1-3/4"] Material: Galvanized Capacity: 5200Lbs Hubs: None Spindle/Bearings: 1-1/4" x 1-3/4" Spring Centers: 67" Track: 86" Brand: UFP

2″x3″ 93″ Track 80-3/8″SC Straight Spring Axles - PH4750 - 2X3X93.5TR 80-3/8 SC 5L

SPECS SKU: PH4750 Type: AX 2X3X93.5TR 80-3/8 SC 5L HD W/FLA Material: Galvanized Capacity: 3500Lbs Hubs: 5 Lug Spindle/Bearings: 1-3/8"X1-1/16" Spring Centers: 80-3/8" Track: 93-1/2" Brand: UFP

2″x3″ 93″ Track 80-3/8″SC Straight Spring Axles - PH4751 - AX 2X3X93.5TR 80-3/8SC [No Hubs]

SPECS SKU: PH4751 Type: AX 2X3X93.5TR 80-3/8SC HD W/FLG [NO HUBS] Material: Galvanized Capacity: 3500Lbs Hubs: None Spindle/Bearings: 1-3/8"X1-1/16" Spring Centers: 80-3/8" Track: 93-1/2" Brand: UFP

2″x2″ 88″ Track 73-3/8″SC Straight Spring Axles - PH3271 - 2X2X88TR 73-3/8SC 5L HD

SPECS SKU: PH3271 Type: AX 2X2X88TR 73-3/8 SC 5L HD W/FLANG Material: Galvanized Capacity: 3500Lbs Hubs: 5 Lug Spindle/Bearings: 1-3/8X1-1/16" Spring Centers: 73-3/8" Track: 88" Brand: UFP

2″x2″ 88″ Track 73-3/8″SC Straight Spring Axles - PH3272 - AX 2X2X88TR 73-3/8S[No Hubs]

SPECS SKU: PH3272 Type: AX 2X2X88TR 73-3/8SC HD W/FLG[NO HUBS] Material: Galvanized Capacity: 3500Lbs Hubs: No Hubs Spindle/Bearings: 1-3/8X1-1/16" Spring Centers: 73-3/8" Track: 88" Brand: UFP

Plastic Bunk Cover - PP2222 - 2"X4" END CAP CALIB

SPECS SKU: PP2222 Type: 2"X4" END CAP BUNK SLIDE GRAY CALIB Material: Gray Plastic Width: 4" Height: 2"

Plastic Bunk Cover - PP2227 - 2X6X12"CALIBER[FT]

SPECS SKU: PP2227 Type: 2X6X12" BUNK SLIDE GRAY CALIBER[FT] Size: 2"X6"X Per Foot Color: Grey Material: Plastic Width: 6" Height: 2" Length: Per Foot

Plastic Bunk Cover - PP2224 - 2"X6" END CAP CALIB

SPECS SKU: PP2224 Type: 2"X6" END CAP BUNK SLIDE GRAY CALIB Material: Gray Plastic Width: 6" Height: 2"

Plastic Bunk Cover - PP2221 - 2X4X12"CALIBER[FT]

SPECS SKU: PP2221 Type: 2X4X12" BUNK SLIDE GRAY CALIBER[FT] Size: 2"X4"X Per Foot Color: Grey Material: Plastic Width: 4" Height: 2" Length: Per Foot

Grey Carpet - PT0278- GREY 20"X12" (Per FT)

SPECS SKU: PT0278 Type: CARPET 20"X12" GREY 20OZ (PER FOOT) Color: Grey Width: 20" Qty: Per FT

Grey Carpet - PT0281 - GREY 12" X 100' Roll

SPECS SKU: PT0281 Type: CARPET GREY 12" X 100' (20 OZ) Color: Grey Width: 12" Qty: 100'ft Roll

Grey Carpet - PT0285 - GREY 24" X 100' Roll

SPECS SKU: PT0285 Type: CARPET GREY 24" X 100' ROLL Color: Grey Width: 24" Qty: 100'ft Roll

Grey Carpet - PT0277- GREY 9"X12" (Per FT)

SPECS SKU: PT0277 Type: CARPET 9"X12" GREY 20OZ (PER FOOT Color: Grey Width: 9" Length: Per Foot

Grey Carpet - PT0276 - GREY 12"X12" (Per FT)

SPECS SKU: PT0276 Type: CARPET 12"X12" GREY 20OZ (PER FOOT) Color: Grey Width: 12" Length: Per Foot

Grey Carpet - PT0279 - GREY 24"X12" (Per FT)

SPECS SKU: PT0279 Type: CARPET 24"X12" GREY 20OZ (PER FOOT) Color: Grey Width: 24" Length: Per Foot

Plush Black Carpet - PT0302-2 -CARPET 12"X12" Black [per ft]

SPECS SKU: PT0302-2 Type: CARPET 12"X12" BLACK PLUSH (PER FT) Width: 12" Length: per ft

Plush Black Carpet - PT0302 - CARPET 9"X12" BLACK(PER FT)

SPECS SKU: PT0302 Type: CARPET 9"X12" BLACK PLUSH (PER FT) Width: 9" Length: per ft

Plush Black Carpet - PT0303-CARPET 20"X12" BLACK(PER FT)

SPECS SKU: PT0303 Type: CARPET 20"X12" BLACK PLUSH (PER FT) Width: 20" Length: per ft

Plush Black Carpet - PT0303-1-CARPET 24"X12" BLACK(PER FT)

SPECS SKU: PT0303-1 Type: CARPET 24"X12" BLACK PLUSH (PER FT) Width: 24" Length: per ft

Bow Board Kits - PT2196-BOW SUPPORT ALS TO 24'

SPECS SKU: PT2196 Type: ADJ.BOW SUPPORT ALS TO 24' 3000-600 Bunk Size: PINE BUNK CARPETED 2X6X6 ft FLAT

Bow Board Kits - PT2197-BOW SUPPORT ALS 26'

SPECS SKU: PT2197 Type: ADJ.BOW SUPPORT ALS 26'-UP 6000-820 Bunk Size: PINE BUNK CARPETED 2X6X7' FLAT

PT2200 ~ BOW BOARD KIT LIGHT-DUTY - 6'

Magic Tilt Bow Board Kit ~ PT2200 Type: Adjustable Bow Board Kit Boards: 2" x 6" x 6' Pressure Treated Pine Carpet Color: Gray Or Black (Select) Application: Boats Up To 3,000 Pounds Spans Two 3" x 3" Crossmembers at front of trailer. Can be used on other crossmember sizes by changing the u-bolts. Included in this kit: 4 x PT1565 8" Bunk Bracket Galv 2 x Carpeted Horizontal Bunk 2" x 6" x 6' 4 x PT2070 Pivot L-Bracket Galv 8 x PY0411 3/8 x 1-1/4" Lag Screw Galv 4 x PY1405 3/8 Hex Nut Galv 8 x PY1406 7/16 Hex Nut Galv 4 x PY1505 3/8 Flat Washer Galv 4 x PY1605 3/8 Lock Washer Galv 8 x PY1606 7/16 Lock Washer Galv 4 x PY1650 3/8 x 1-1/4" Bolt Galv 4 x PY2096 7/16 x 3-1/16" x 4-5/16" U-Bolt Galv

Bow Rest/Roller Guide Components - PV2282-2 -ROLLER GUIDE[Bar Only 8"]

SPECS SKU: PV2282-2 Type: BOW REST/ROLLER GUIDE[BAR ONLY 8"LE Length: 8"

PV2281 ~ BARE BOW REST "Y" (NO GUIDE)

REPRESENTATION PHOTO MAGIC TILT BARE BOW REST ~ PV2281 TYPE: BOW REST W/ OUT GUIDE TUBE SIZE: 2" x 2" x 6-3/4" TABLE DIMENSIONS: 3" x 9-1/2" (STRAIGHT-LINE) MATERIAL: GALVANIZED NOTES: NO PRE-DRILLED HOLES REPLACEMENT REST FOR PS5100 ASSEMBLY CAN USE WITH INDIVIDUALLY WITH PP2245 RUB PAD OR IN PAIRS WITH 2x4 AND 2x6 HORIZONTAL BUNKS MOUNTING HARDWARE (NOT INCLUDED): EITHER PS2652 CLAMP-OVER OR TOP HAT CLAMPS OR ASSEMBLIES

Guide Components - PV2159 - GUIDE W/O PVC [EA]

SPECS SKU: PV2159 Type: STD.HD TUBE GUIDE W/O PVC [EACH] Material: Galv Height: 30" to the Lip

Guide Components - PV2157 - PVC SLEEVE FOR STD TUBE

SPECS SKU: PV2157 Type: PVC SLEEVE/CAP FOR STD.HD TUBE GUID Material: PVC

PV2164 ~ TUBE GUIDE POLE HEAVY DUTY

REPRESENTATION PHOTO MAGIC TILT TUBE GUIDE ~ PV2164 PLEASE CALL 941-358-1117 FOR SHIPPING QUOTE. TYPE: SUPER HD GUIDE POLE NO PVC (EACH) MATERIAL: GALVANIZED TUBE SIZE: 1-1/2" x 1-1/2" HEIGHT: 63" (50" FROM LIP) WIDTH: 36" NOTES: LONGER, TALLER AND HEAVIER THAN STANDARD TUBE GUIDE FOR LARGER BOATS. OPTIONAL GUIDE POLE COVERS

Guide Components - PV2166 - PVC SLEEVE FOR S.H.D.TUBE

SPECS SKU: PV2166 Type: PVC SLEEVE/CAP FOR SUPER H.D.TUBE GUIDE Material: PVC Length: 72"

Guide Brackets - PV1925-GUIDE-ON BRACKET [EACH]

SPECS SKU: PV1925 Type: UNIVERSAL GUIDE-ON BRACKET [EACH] Material: Galv

PV1930 ~ GALVANIZED TRAILER UNIVERSAL GUIDE POLE MOUNT KIT

REPRESENTATION PHOTO MAGIC TILT GUIDE-ON ASSEMBLY ~ PV1930 TYPE: UNIVERSAL GUIDE-ON BRACKET ASSEMBLY (PAIR) APPLICATION: FITS 1-1/2" SQUARE POLES TO 2" WIDE GALVANIZED FRAMES FINISH: GALVANIZED TO ORDER, SELECT FRAME HEIGHT IN DROP-DOWN INCLUDES: 2 x PV1925 UNIVERSAL GUIDE-ON BRACKET 4 x PY1995 U-BOLT 3/8" 1-9/16 x 2-5/8 GALV 4 x U-BOLT 1/2" 2-1/16 x * (SELECT FRAME HEIGHT IN DROP-DOWN) 8 x PY1405 3/8" NUT GALV 8 x PY1605 3/8" LOCK WASHER GALV 8 x PY1410 1/2" NUT GALV 8 x PY1610 1/2" LOCK WASHER GALV 8 x PY1515 1/2" FLAT WASHER GALV

PS2658 ~ CA CHANNEL MOUNT GUIDE POLE MOUNT KIT

REPRESENTATION PHOTO MAGIC TILT GUIDE POLE MOUNT ASSEMBLY ~ PS2658 TYPE: GUIDE POLE MOUNT ASSEMBLY APPLICATION: FITS 1-1/2" SQUARE GUIDE POLES TO CA SERIES ALUMINUM TRAILERS EQUIPED WITH UNDER-FRAME CHANNEL. INCLUDES: 2 x PS2653-1 CLAMP-ON FOR 1-1/2" GUIDE POLES GALV 2 x PS2655 GUIDE PLATE FOR CA SERIES TRAILERS WITH UNDER-FRAME CHANNEL ALUM 4 x PY1701 1/2" x 1-1/2" SQUARE-HEAD BOLT STAINLESS 4 x PY1820 1/2" NYLOCK NUT STAINLESS 4 x PY1905 1/2" FLAT WASHER STAINLESS 8 x PY1710 3/8" x 1-1/4" BOLT STAINLESS 8 x PY1810 3/8" NYLOCK NUT STAINLESS 16 x PY1902 3/8" FLAT WASHER STAINLESS

PS2655 ~ CA CHANNEL MOUNT GUIDE POLE MOUNT PLATE ALUMINUM

REPRESENTATION PHOTO MAGIC TILT MOUNT PLATE ~ PS2655 TYPE: GUIDE POLE MOUNT PLATE MATERIAL: ALUMINUM WIDTH: 5" THICKNESS: 1/4" LENGTH: 6" NOTES: USED IN HARDWARE KIT PS2658 . FOR MOUNTING GUIDE POLES TO CA SERIES ALUMINUM TRAILERS EQUIPED WITH UNDER-FRAME CHANNEL. HOLE SIZE: TWO 1/2" SLOTTED HOLES & FOUR 3/8" HOLES.

Airboat Guide Poles - PS4900 - AIRBOAT GUIDE POLE [26"]

SPECS SKU: PS4900 Type: AIRBOAT WELDED GUIDE POLE [26"] Material: Galvanized Width: 1-1/2" Height: 26

Airboat Guide Poles - PS4901 - AIRBOAT GUIDE POLE [20"]

SPECS SKU: PS4901 Type: AIRBOAT GUIDE BOARD POLE 20" Material: Galvanized Width: 1-1/2" Height: 20"

3"X3" 11GA Galvanized Tongue - PU2851 - 3" X 3" X 8ft 6in

SPECS SKU: PU2851 Type: TONGUE 3" X 3" X 8'6" 11GA Size: 3" X 3" X 8'6" Material: Galvanized Width: 3" Height: 3" Length: 8ft 6in Gauge: 11ga

3"X3" 11GA Galvanized Tongue - PU2900 - 3" X 3" X 9ft

SPECS SKU: PU2900 Type: TONGUE 3" X 3" X 9' 11 GA Size: 3"X3"X9' Tongue Material: Galvanized Width: 3" Height: 3" Length: 9 ft Gauge: 11

3"X3" 11GA Galvanized Tongue - PU2905 - 3"X3"X10ft

SPECS SKU: PU2905 Type: TONGUE 3"X3"X10' 11 GA. Size: 3"X3" Tongue Material: Galvanized Width: 3" Height: 3" Length: 10' Gauge: 11

3"X3" 11GA Galvanized Tongue - PU3511 - 3" X 3" X 11ft

SPECS SKU: PU3511 Type: TONGUE 3" X 3" X 11' 11GA. Size: 3" X 3" X 11' Material: Galvanized Width: 3" Height: 3" Length: 11Ft Gauge: 11

3"X3" 11GA Galvanized Tongue - PU4050 - 3X3 [Per ft]

SPECS SKU: PU4050 Type: GALVANIZED TUBE 3X3 PER FOOT 11GA Size: 3" X 3" X Per Foot Material: Galvanized Width: 3" Height: 3" Length: Per Foot Gauge: 11GA

3"X3" 11GA Galvanized Tongue - PU2845 - 3" X 3" X 5ft

SPECS SKU: PU2845 Type: TONGUE 3" X 3" X 5' 11GA Size: 3" X 3" X 5' Material: Galvanized Width: 3" Height: 3" Length: 5ft Gauge: 11ga

3"X3" 11GA Galvanized Tongue - PU2850 - 3" X 3" X 6ft

SPECS SKU: PU2850 Type: TONGUE 3" X 3" X 6' 11 GA. Size: 3"X3"X6' Tongue Material: Galvanized Width: 3" Height: 3" Length: 6ft Gauge: 11

3"X3" 11GA Galvanized Tongue - PU2755 - 3" X 3" X 7ft

SPECS SKU: PU2755 Type: TONGUE 3" X 3" X 7' 11 GA. Size: 3" X 3" X 7' Material: Galvanized Width: 3" Height: 3" Length: 7ft Gauge: 11

3"X3" 11GA Galvanized Tongue - PU2852 - 3" X 3" X 8ft

SPECS SKU: PU2852 Type: TONGUE 3" X 3" X 8' 11 GA. Size: 3" X 3" X 8' Material: Galvanized Width: 3" Height: 3" Length: 8ft Gauge: 11ga

3"X5" 3/16GA Galvanized Tongue - PU1546 - TONGUE 3X5X5' [3/16]

SPECS SKU: PU1546 Type: TONGUE 3X5X5' [3/16] Size: 3"X5" Tongue Material: Galvanized Width: 3" Height: 5" Length: 5ft Gauge: 3/16

3"X5" 3/16GA Galvanized Tongue - PU1548 - TONGUE 3X5X6' [3/16]

SPECS SKU: PU1548 Type: TONGUE 3X5X6' [3/16] Size: 3"X5" Tongue Material: Galvanized Width: 3" Height: 5" Length: 6ft Gauge: 3/16"

3"X5" 3/16GA Galvanized Tongue - PU1549 - TONGUE 3X5X7' [3/16]

SPECS SKU: PU1549 Type: TONGUE 3X5X7' [3/16] Size: 3"X5" Tongue Material: Galvanized Width: 3" Height: 5" Length: 7ft Gauge: 3/16"

3"X5" 3/16GA Galvanized Tongue - PU2920 - TONGUE 3X5X9' [3/16]

SPECS SKU: PU2920 Type: TONGUE 3X5X9' 3/16 Size: 3"X5" Tongue Material: Galvanized Width: 3" Height: 5" Length: 9ft Gauge: 3/16"

3"X5" 3/16GA Galvanized Tongue - PU2922 - TONGUE 3X5X10' [3/16]

SPECS SKU: PU2922 Type: TONGUE 3X5X10' 3/16Ga Size: 3"X5"X10ft Tongue Material: Galvanized Width: 3" Height: 5" Length: 10ft Gauge: 3/16"

Swing Tongue Assemblies - PU0520 - SWING TONGUE ASSY 3X3

SPECS SKU: PU0520 Type: SWING TONGUE ASSY 3X3 UFP Material: Galvanized Width: 3" Height: 3" Length: 6' Gauge: 11 Brand: UFP Contains: 3X3X24" SWING TONGUE ASSEMBLY SWING TONGUE RR 3X3X4' W/PIVOT BOX SWING TONGUE HTCH PIN 5/8X5"

Swing Tongue Assemblies - PU0525 - SWING TONGUE ASSY 3X4

SPECS SKU: PU0525 Type: SWING TONGUE ASSY 3X4 UFP Material: Galvanized Width: 3" Height: 4" Length: 6' Gauge: 11 Brand: UFP Contains: 3X4X24" SWING TONGUE ASSY SWING TONGUE RR 3X4X4' W/PIVOT BOX 3X4 SWING TONGUE PIVOT BOX GALV SWING TONGUE HTCH PIN 5/8X5"

Swing Tongue Assemblies - PU0528 - SWING TONGUE ASSY 3X5

SPECS SKU: PU0528 Material: Galvanized Width: 3" Height: 5" Length: 6' Gauge: 11 Contains: SWING TONGUE RR 3X5X4' W/PIVOT BOX 3X5X24" SWING TONGUE ASSY-UFP SWING TONGUE HTCH PIN 5/8X6"

Bolt On Swing Tongue Assemblies - PU1391 - 2X3" BOLT ON HINGE KIT

SPECS SKU: PU1391 Type: 2X3" SWING TONGUE BOLT-ON HINGE KIT 3500# - FULTON Fits: 2X3 Tongue Capacity: Up to 5,000 lbs Brand: Fulton

Bolt On Swing Tongue Assemblies - PU1393 - 3X3" BOLT ON HINGE KIT

SPECS SKU: PU1393 Type: 3X3" SWING TONGUE BOLT ON HINGE KIT Fits: 3"X3" Tongue Capacity: Up to 5,000 lbs Brand: Fulton

Bolt On Swing Tongue Assemblies - PU1395 - 3X4" BOLT ON HINGE KIT

SPECS SKU: PU1395 Type: 3X4" SWING TONGUE BOLT ON HINGE KIT Fits: 3"X4" Tongue Capacity: Up to 7,000 lbs Brand: Fulton

Bolt On Swing Tongue Assemblies - PU1397 - 3X5" BOLT ON HINGE KIT

SPECS SKU: PU1397 Type: 3X5" SWING TONGUE BOLT ON HINGE KIT 9000# Fits: 3"X5" Tongue Capacity: Up to 9,000 lbs Brand: Fulton

4 Way - Wire Harnesses - PL2090 - WIRE HARNESS 17'

SPECS SKU: PL2090 Type: 4 way - WIRE HARNESS 17' Length: 17ft Brand: Wesbar

4 Way - Wire Harnesses - PL2100 - WIRE HARNESS 20'

SPECS SKU: PL2100 Type: 4 Way WIRE HARNESS 20' Length: 20ft Brand: Wesbar

4 Way - Wire Harnesses - PL2110 - WIRE HARNESS 25'

SPECS SKU: PL2110 Type: 4 Way - WIRE HARNESS 25' Length: 25ft Brand: Wesbar

4 Way - Wire Harnesses - PL2120 - WIRE HARNESS 28'

SPECS SKU: PL2120 Type: 4 Way - WIRE HARNESS 28' Length: 28ft Brand: Wesbar

4 Way - Wire Harnesses - PL2130 - WIRE HARNESS 35'

SPECS SKU: PL2130 Type: 4 Way - WIRE HARNESS 35' Length: 35ft Brand: Wesbar

4 Way - Wire Harnesses - PL2140 - WIRE HARNESS 40'

SPECS SKU: PL2140 Type: 4 Way- WIRE HARNESS 40' Length: 40ft Brand: Wesbar

5-Way Wire Harnesses - PL2128 - 5 WAY WIRE HARNESS 30'

SPECS SKU: PL2128 Type: 5-Way Wire Harnesses Length: 30ft Brand: Wesbar

5-Way Wire Harnesses - PL2129 - 5 WAY WIRE HARNESS 35'

SPECS SKU: PL2129 Type: 5-Way Wire Harnesses Length: 35ft Brand: Wesbar

5-Way Wire Harnesses - PL2142 - 5 WAY WIRE HARNESS 40'

SPECS SKU: PL2142 Type: 5-Way Wire Harnesses Length: 40ft Brand: Wesbar

Single Diode Marker Lights - PL1116 - DIODE PLUG MARKER- 8" LEAD

SPECS SKU: PL1116 Type: LED AMBER SINGLE DIODE PLUG MARKER- 8" LEAD Length: 8"

Single Diode Marker Lights - PL1117 - DIODE PLUG MARKER- 16" LEAD

SPECS SKU: PL1117 Type: LED AMBER SINGLE DIODE PLUG MARKER- 16" LEAD Length: 16"

Single Diode Marker Lights - PL1119 - RED DIODE PLUG MARKER- 8" LEAD

SPECS SKU: PL1119 Type: LED RED SINGLE DIODE PLUG MARKER- 8" LEAD Color: Red Length: 8" Lead

3" x 3" 70"FW "V" Torsion Axles - PH1556-1 - AX[V]3X3 HD DISC 70FRM ASSY

SPECS SKU: PH1556-1 Type: TORSION AX[V]3X3 HD DISC 70FRM ASSY Material: Galvanized Capacity: 3500Lbs FW: 70" Hubs: 5 Lug Disc Brake Spindle/Bearings: 1-3/8"X1-1/16" Track: 84" Hub Face Brand: UFP

3" x 3" 70"FW "V" Torsion Axles - PH1556 - AX[V]3X3 HD 70FRM ASSY

SPECS SKU: PH1556 Type: TORSION AX[V]3X3 HD 70FRM ASSY Material: Galvanized Capacity: 3500Lbs FW: 70" Hubs: 5 Lug Track: 84" Hub Face Spindle/Bearings: 1-3/8X1-1/16" Brand: UFP

3" x 3" 70"FW Straight Torsion Axles - PH1580 - [STR]3X3 HD 70FRM ASSY

SPECS SKU: PH1580 Type: TORSION AX[STR]3X3 HD 70FRM ASSY Material: Galvanized Capacity: 3500Lbs FW: 70" Hubs: 5 Lug Spindle/Bearings: 1-3/8X1-1/16" Brand: UFP

3" x 3" 70"FW Straight Torsion Axles - PH1710 - [STR]3X3 3500# 70" FRM[NO ARMS]

SPECS SKU: PH1710 Type: TORSION AX [STR]3X3 3500# 70" FRAME - NO ARMS Material: Galvanized Capacity: 3500Lbs FW: 70" Hubs: None- Beam Only Brand: UFP

PH1849 ~ SPINDLE 1-1/16" x 1-3/8" 3.5K DEXTER / UFP

REPRESENTATION PHOTO MAGIC TILT SPINDLE ~ PH1849 TYPE: TAPERED SPINDLE W/ BRAKE FLANGE, POSI-LUBE CAPABLE BEARING SIZE: 1-1/16" x 1-3/8" CAPACITY: 3500 LBS BRAKE FLANGE: 4-HOLE SQUARE WITH 7/16" HOLES AXLE TUBES: 2" x 2" AND 2" x 3" BRAND: DEXTER / UFP NOTES:

PH1906 ~ SPINDLE 1-1/4" x 1-3/4" 5-6K DEXTER / UFP

REPRESENTATION PHOTO MAGIC TILT SPINDLE ~ PH1906 TYPE: TAPERED SPINDLE WITH BRAKE FLANGE, POSI-LUBE CAPABLE BEARING SIZE: 1-1/4" x 1-3/4" CAPACITY: 5,000 POUNDS (6-LUG) 6,000 POUNDS (8-LUG) BRAKE FLANGE: 4-HOLE HEAVY DUTY WITH 7/16" HOLES AXLE TUBES: 2" x 3" BRAND: DEXTER / UFP NOTES:

Spindles - PH1905 - 1-3/4X1-1/4" W/FLANGE [UFP]

SPECS SKU:PH1905 Type:Spindle W/ Flange Size:1-3/4" x 1-1/4" Capacity:5200/7000 Brand:UFP Weight:7.75Lbs

Spindles - PH1855 - 1-3/8X1-1/16" POSI LUBE

SPECS SKU:PH1855 Type:Spindle W/Posi-Lube Size:1-3/8X1-1/16" Capacity:3500 lbs. Brand:UFP

PH1903 ~ SPINDLE 1-1/4" x 1-3/4" 5-6K DEXTER / UFP

REPRESENTATION PHOTO MAGIC TILT SPINDLE ~ PH1903 TYPE: TAPERED SPINDLE, POSI-LUBE CAPABLE, NO BRAKE FLANGE BEARING SIZE: 1-1/4" x 1-3/4" CAPACITY: 5,000 POUNDS (6-LUG) 6,000 POUNDS (8-LUG) BRAKE FLANGE: NONE AXLE TUBES: 2" x 3" BRAND: DEXTER / UFP NOTES:

Spindles - PH1900 - SPINDLE 1-3/4X1-1/4"

SPECS SKU:PH1900 Type:Spindle Size:1-3/4" x 1-1/4" Capacity:5200/7000 Brand:UFP Weight:6.85Lbs

Spindles - PH1803 - SPINDLE 1-1/16" POSI LUBE

SPECS SKU:PH1803 Type:Spindle W/Posi Lube Size:1-1/16" Capacity:2500 lbs. Brand:UFP

PH1800 ~ SPINDLE 1-1/16" x 1-1/16" 2.5K DEXTER / UFP

REPRESENTATION PHOTO MAGIC TILT SPINDLE ~ PH1800 TYPE: WELD-IN STRAIGHT SPINDLE BEARING SIZE: 1-1/16" x 1-1/16" SEAL ID: 1.25" THREAD DIMETER: 13/16" NF FOR AXLE TUBE: 2" CAPACITY: 2,500 LBS. BRAND: DEXTER / UFP NOTES:

PH1752 ~ SPINDLE 1-1/16" x 1-1/16" 1.5K UCF

REPRESENTATION PHOTO MAGIC TILT SPINDLE ~ PH1752 TYPE: WELD-IN STRAIGHT SPINDLE BEARING SIZE: 1-1/16" x 1-1/16" SEAL ID: 1.25" THREAD DIMETER: 1" NF FOR AXLE TUBE: 1-1/2" CAPACITY: 1500 LBS. BRAND: UCF NOTES:

PH1327 ~ TORSION ARM 3" AXLES W/ POSI-LUBE DEXTER / UFP

REPRESENTATION PHOTO MAGIC TILT TORSION ARM & SPINDLE ~ PH1327 TYPE: TORSION ARM WITH SPINDLE - POSI-LUBE APPLICATION: 3" x 3" DEXTER / UFP TORSION AXLE SPINDLE: 1-1/16" x 1-3/8" CAPACITY: 3,500 POUNDS SIDE: LEFT OR RIGHT FINISH: ZINC PLATED PINCH BOLT: 5/8" BRAND: DEXTER / UFP CAUTION – MAKE SURE YOU PROPERLY IDENTIFY YOUR BRAND OF TORSION ARM AS UFP (SEE SECOND IMAGE) NOTES: INCLUDES 4-HOLE BRAKE PLATE AND TORSION ARM MOUNTING BOLT REQUIRES THE FOLLOWING HUB MOUNTING HARDWARE KIT PH2125 (NOT INCLUDED)

Torsion Arms - PH1331 - 3-1/2" ARM/SPINDLE RH[UFP]

SPECS SKU: PH1331 Type: 3-1/2"TORSION ARM SPINDLE RH(UFP DR Size: 3-1/2" Brand: UFP

Torsion Arms - PH150-43 - ARM+SPINDLE UCF R/H

SPECS SKU: PH150-43 Type: ARM+SPINDLE 5200/7000# R/H Brand: UCF

Torsion Arms - PH1332 - 3-1/2" ARM /SPINDLE LH[UFP]

SPECS SKU: PH1332 Type: 3-1/2"TORSION ARM SPINDLE LH(UFP DR Size: 3-1/2" Brand: UFP Weight:9Lbs

Torsion Arms - PH1329 - ARM/VAULT 5L HUB ASSY

SPECS SKU: PH1329 Type: Torsion Arm/Vault 5L Hub Assy Finish: zinc plated Hubs: 5L Spindle: 1 3/8" x 1 1/16" Brand: UFP

PH1325 ~ TORSION ARM 3" AXLES NON-POSI LUBE DEXTER / UFP

REPRESENTATION PHOTO MAGIC TILT TORSION ARM & SPINDLE ~ PH1325 TYPE: TORSION ARM WITH SPINDLE - NO POSI-LUBE APPLICATION: 3" x 3" DEXTER / UFP TORSION AXLE CAPACITY: 3,500 POUNDS SPINDLE: 1-1/16" x 1-3/8" SIDE: LEFT OR RIGHT FINISH: ZINC PLATED PINCH BOLT: 5/8" BRAND: DEXTER / UFP CAUTION – MAKE SURE YOU PROPERLY IDENTIFY YOUR BRAND OF TORSION ARM AS UFP (SEE SECOND IMAGE) NOTES: INCLUDES 4-HOLE BRAKE PLATE AND TORSION ARM MOUNTING BOLT REQUIRES THE FOLLOWING HUB MOUNTING HARDWARE KIT PH2125 (NOT INCLUDED)

PH1330 ~ TORSION ARM 3-1/2" AXLES SQUARE PLATE DEXTER / UFP

REPRESENTATION PHOTO MAGIC TILT TORSION ARM & SPINDLE ~ PH1330 TYPE: TORSION ARM WITH SPINDLE APPLICATION: 3-1/2" x 3-1/2" DEXTER / UFP TORSION AXLES CAPACITY: 5,000 (6-LUG) TO 6,000 (8-LUG) POUNDS SPINDLE: 1-1/4" x 1-3/4" SIDE: LEFT OR RIGHT FINISH: ZINC PLATED PINCH BOLT: 7/8" BRAKE PLATE: 4-HOLE BRAND: DEXTER / UFP NOTES: INCLUDES 4-HOLE BRAKE PLATE AND TORSION ARM-TO-AXLE MOUNTING HARDWARE

PH150-40 ~ TORSION ARM FOR 3" AXLES FA-35 (NON-UFP)

REPRESENTATION PHOTO MAGIC TILT TORSION ARM & SPINDLE ~ PH150-40 TYPE: TORSION ARM / SPINDLE WITH POSI-LUBE CAPACITY: 3,500 POUNDS SPINDLE: 1-1/16" x 1-3/8" SIDE: LEFT OR RIGHT FINISH: ZINC PLATED PINCH BOLT: 5/8" BRAND: UCF CAUTION – MAKE SURE YOU PROPERLY IDENTIFY YOUR BRAND OF TORSION ARM AS FA-35 (SEE SECOND IMAGE) NOTES: INCLUDES 4-HOLE BRAKE PLATE, TORSION ARM MOUNTING BOLT, POSI-LUBE FITTING. THIS ARM WILL NOT WORK ON STANDARD DEXTER / UFP AXLES.

Torsion Arms - PH150-42 - ARM/SPINDLE UCF L/H

SPECS SKU: PH150-42 Type: ARM+SPINDLE 5200/7000# L/H Brand: UCF

PH1980 ~ SPINDLE NUT 13/16"

REPRESENTATION PHOTO MAGIC TILT SPINDLE NUT ~ PH1980 THREADS: 13/16-20 THICKNESS: 0.34" WRENCH SIZE: 1-1/8" SOLD INDIVIDUALLY NOTES:

SPINDLE NUT - PH1950 - AXLE NUT 3/4" ID

SPECS SKU: PH1950 Size: 3/4" ID

PH2000 ~ SPINDLE NUT 1"

REPRESENTATION PHOTO MAGIC TILT SPINDLE NUT ~ PH2000 THREADS: 1-14 THICKNESS: 0.54" WRENCH SIZE: 1-7/16" SOLD INDIVIDUALLY

PH2108 ~ SPINDLE NUT RETAINER

REPRESENTATION PHOTO MAGIC TILT SPINDLE NUT RETAINER ~ PH2108 TYPE: SPINDLE NUT RETAINER SIZE: 13/16" SOLD INDIVIDUALLY NOTES:

COTTER PINS - PH2012 - COTTER PIN 1/8"X1-1/4"[UFP AXLE]

SPECS SKU: PH2012 Type: COTTER PIN 1/8"X1-1/4"[UFP AXLE] Size: 1/8" x 1-1/4"

PH150-72 ~ TORSION AXLE WELD-ON BRACKET 4" UCF

REPRESENTATION PHOTO OUT OF STOCK MAGIC TILT MOUNTING BRACKET ~ PH150-72 TYPE: TORSION AXLE MOUNTING BRACKET FK70 WIDTH: 2-1/2" HEIGHT: 3-1/4" LENGTH: 12" HOLE CENTER: 9" CAPACITY: 4" TORSION BEAMS (5200 - 7000 LBS.) MATERIAL: RAW STEEL BRAND: UCF TO ORDER, SELECT LEFT OR RIGHT FROM DROP-DOWN STANDING BEHIND TRAILER LOOKING FORWARD

PH1349 ~ TORSION AXLE WELD-ON BRACKET 3" DEXTER / UFP

REPRESENTATION PHOTO MAGIC TILT WELD-ON BRACKET TYPE: TORSION AXLE WELD-ON BRACKET FITS: 3" x 3" TUBE WIDTH: 5" LENGTH: 11" HEIGHT: 1" SIDE: LEFT OR RIGHT HOLE SIZE: 1/2", 8" CENTER HOLE TO CENTER HOLE MATERIAL: GLAVANIZED BRAND: DEXTER / UFP

Spring Tabs - PH2104-1 - AXLE SPRING TAB [GALV]

SPECS SKU: PH2104-1 Type: AXLE SPRING TAB 3"X2" [GALV] Material: Galv Width:2" Length:3" Brand:UFP

Spring Tabs - PH2104 - AXLE SPRING TAB

SPECS SKU:PH2104 Width:2" Length:3" Brand:UFP Weight:.49Lbs

Spring Tabs - PH2106 - AXLE SPRING TAB 2"X 1-1/2"

SPECS SKU:PH2106 Width:1-1/2" Length:2" Brand:UFP Weight:.15Lbs

3" x 3" 69"FW Straight Torsion Axles - PH1615-1 -AX[STR]3X3 W/DISC 69FRM ASS

SPECS SKU: PH1615-1 Type: TORSION AX[STR]3X3 W/DISC 69FRM ASS Material: Galvanized Capacity: 3500Lbs FW: 69" Hubs: 5 Lug Disc Brakes Spindle/Bearings: 1-3/8X1-1/16" Brand: UFP

3" x 3" 69"FW Straight Torsion Axles - PH1615 -AX[STR]3X3 W/5LUG 69FRM ASSY

SPECS SKU: PH1615 Type: TORSION AX[STR]3X3 HD 69FRM ASSY Material: Galvanized Capacity: 3500Lbs FW: 69" Hubs: 5 Lug Spindle/Bearings: 1-3/8X1-1/16" Brand: UFP

3" x 3" 79"FW Straight Torsion Axles - PH1584-1 - AX[STR]3X3 HD DISC 79FRM ASSY

SPECS SKU: PH1584-1 Type: TORSION AX[STR]3X3 HD DISC 79FRM AS Material: Galvanized Capacity: 3500Lbs FW: 79" Hubs: 5 Lug Disc Brakes Spindle/Bearings: 1-3/8X1-1/16" Track: 93" Hub Face Brand: UFP

3" x 3" 79"FW Straight Torsion Axles - PH1584 - AX[STR]3X3 W/5LUG 79FRM ASSY

SPECS SKU: PH1584 Type: TORSION AX[STR]3X3 HD 79FRM ASSY Material: Galvanized Capacity: 3500Lbs FW: 79" Hubs: 5 Lug Spindle/Bearings: 1-3/8X1-1/16" Brand: UFP

3" x 3" 76"FW Straight Torsion Axles - PH1582-1 -AX[STR]3X3 HD DISC 76FRM

SPECS SKU: PH1582-1 Type: TORSION AX[STR]3X3 HD DISC 76FRM Material: Galvanized Capacity: 3500Lbs FW:76" Hubs: 5 Lug Disc Brakes Spindle/Bearings: 1-3/8X1-1/16" Track: Brand: UFP

3" x 3" 76"FW Straight Torsion Axles - PH1582 - AX[STR]3X3 W/5LUG 76 FRM ASSY

SPECS SKU: PH1582 Type: TORSION AX[STR]3X3 HD 76 FRM ASSY Material: Galvanized Capacity: 3500Lbs FW: 76" Hubs: 5 Lug Spindle/Bearings: 1-3/8X1-1/16" Brand: UFP

3" x 3" FW 86" Straight Torsion Axles - PH1585 -AX[STR]3X3 W/5LUG 86FRM ASSY

SPECS SKU: PH1585 Type: TORSION AX[STR]3X3 HD 86FRM ASSY Material: Galvanized Capacity: 3500Lbs FW: 86" Hubs: 5 Lug Spindle/Bearings: 1-3/8X1-1/16" Brand: UFP

3" x 3" 79"FW "V" Torsion Axles - PH1560-1-AX[V]3X3 HD 79"FRM W/O HUB

SPECS SKU: PH1560-1 Type: TORSION AX[V]3X3 HD 79"FRM W/O HUB Material: Galvanized Capacity: 3500Lbs FW: 79" Hubs: None Spindle/Bearings: 1-3/8X1-1/16" Brand: UFP

3" x 3" 79"FW "V" Torsion Axles - PH1560 -AX[V]3X3 HD 5LUG79FRM ASSY

SPECS SKU: PH1560 Type: TORSION AX[V]3X3 HD 79FRM ASSY Material: Galvanized Capacity: 3500Lbs FW: 79" Hubs: 5 Lug Spindle/Bearings: 1-3/8X1-1/16" Track: 93" Hub Face Brand: UFP

3" x 3" 79"FW "V" Torsion Axles - PH1560-2 -AX[V]3X3 HD DISC 79FRM ASSY

SPECS SKU: PH1560-2 Type: TORSION AX[V]3X3 HD DISC 79FRM ASSY Material: Galvanized Capacity: 3500Lbs FW: 79" Hubs: 5 Lug Disc Brake Spindle/Bearings: 1-3/8"X1-1/16" Track: 93" Hub Face Brand: UFP

Electrical Components - PL2195 - 2' EXT HARNESS 4 WAY

SPECS SKU: PL2195 Type: 2' EXTENSION HARNESS 4 WAY Length: 2' Extension Harness Brand: WESBAR

Electrical Components - PL2196 - 2' EXT HARNESS 5 WAY

SPECS SKU: PL2196 Type: 2' EXTENSION HARNESS 5 WAY Length: 2' Extension Harness Brand: WESBAR

Electrical Components - PL2198 - 4 WAY TO 5 WAY 20" HARNESS EXT

SPECS SKU: PL2198 Type: 4 WAY TO 5 WAY 20" HARNESS EXTENSION Length: 20" Brand: Bargman

PL2252 ~ 7-WAY TO 4-WAY ADAPTER PLUG

REPRESENTATION PHOTO MAGIC TILT ADAPTER PLUG ~ PL2252 TYPE: 7-WAY ROUND BLADE TO 4-WAY FLAT ADAPTER NOTES: NOT FOR USE WITH TRAILERS WITH HYDRAULIC SURGE BRAKES

PL2311 ~ INSULATED BUTT CONNECTOR

REPRESENTATION PHOTO MAGIC TILT INSULATED BUTT CONNECTOR ~ PL2311 TYPE: HEAT SHRINK FITS: 14 - 16 GA RELATED PARTS (NOT INCLUDED) WIRE HARNESSES: 4-WAY , 5-WAY (FOR BRAKES) PL2944 WIRE TIE WITH ANCHOR CHASSIS CLIPS

Electrical Components - PL2450 - WIRE CLIP SMALL - EA

SPECS SKU: PL2450 Type: CHASSIS WIRE CLIP SMALL - EACH

PL2944 ~ PLASTIC ZIP TIE WITH PLUG ANCHOR 8"

REPRESENTATION PHOTO MAGIC TILT PLASTIC ZIP TIE ~ PL2944 TYPE: SERRATED PLUG FOR MOUNTING IN HOLE TO FRAME LENGTH: 8" RELATED PARTS (NOT INCLUDED) WIRE HARNESSES: 4-WAY , 5-WAY (FOR BRAKES) PL2311 BUTT CONNECTOR CHASSIS CLIPS

PL2954 ~ PLASTIC ZIP TIE 14-1/2"

REPRESENTATION PHOTO MAGIC TILT PLASTIC WIRE TIE ~ PL2954 TYPE: PLASTIC ZIP TIE LENGTH: 14-1/2" RELATED PARTS (NOT INCLUDED) WIRE HARNESSES: 4-WAY , 5-WAY (FOR BRAKES) PL2311 BUTT CONNECTOR PL2944 WIRE TIE WITH ANCHOR CHASSIS CLIPS

PL2700 ~ BULB TRAILER LIGHTING & WIRING KIT <80"

REPRESENTATION PHOTO MAGIC TILT BULB TRAILER LIGHT & WIRING KIT ~ PL2700 APPLICATION: TRAILERS UNDER 80" WIDE TRAILERS WITHOUT SURGE DISC BRAKES INCLUDES: 1 x PL1100 WATERPROOF TAIL LIGHT LH (WITH LICENSE PLATE LIGHT) 1 x PL1150 WATERPROOF TAIL LIGHT RH 2 x PL1065 AMBER CLEARANCE LIGHT 1 x PL2060 25' WIRE HARNESS 4 x PL2311 HEAT-SHRINK BUTT CONNECTOR 14-16 GA 1 x PL2550 LICENSE TAG BRACKET 10 x PL2944 PLASTIC TIE 8"

PL2751 ~ LED TRAILER LIGHTING & WIRING KIT <80"

REPRESENTATION PHOTO MAGIC TILT LED TRAILER LIGHT & WIRING KIT <80"~ PL2751 TYPE: LED APPLICATION: TRAILER WIDTH: UNDER 80" TRAILERS WITHOUT SURGE DISC BRAKES INCLUDES: 1 x PL1112 WATERPROOF LED TAIL LIGHT LH (WITH LICENSE PLATE LIGHT) 1 x PL1110 WATERPROOF LED TAIL LIGHT RH 2 x PL1116 AMBER "DOT" CLEARANCE LIGHTS W/ 8" LEAD 1 x PL2060 25' 4-FLAT WIRE HARNESS 4 x PL2311 HEAT-SHRINK BUTT CONNECTORS 14-16 GA 1 x PL2550 LICENSE TAG BRACKET 10 x PL2944 PLASTIC TIES 8"

PL9060-1 ~ CLEARANCE / MARKER LED KIT

REPRESENTATION PHOTO MAGIC TILT CLEARANCE / MARKER KIT ~ PL9060-1 TYPE: ALUMINUM TRAILER CLEARANCE / MARKER LED KIT

PO3520 ~ WINCH POST 1-1/2" x 1-1/2" x 24" PWC

REPRESENTATION PHOT MAGIC TILT PWC WINCH POST ~ PO3520 TYPE: PWC WINCH POST FITS: 1-1/2" AND 2" WIDE TONGUES HEIGHT: 24" POST DIMENSION: 1-1/2" x 1-1/2" SLOPE: STRAIGHT UP AND DOWN MATERIAL: GALVANIZED HOLE SIZE: 1/2" BASE PLATE: 3-3/4" x 3-3/8" HOLE CENTERS: 2-1/4" AND 2-1/2" NOTES: UTILIZES PO2042 PWC WINCH/BOW STOP CAN BE THROUGH-BOLTED ON I-BEAMS DOES NOT INCLUDE MOUNTING HARDWARE OR PO3538 END PLUG

PO1945 ~ 2-1/2" x 2-1/2" TWO-PIECE BOW REST BOTTOM

REPRESENTATION PHOTO MAGIC TILT BOW REST BOTTOM ~ PO1945 TYPE: 2-PIECE BOW REST BOTTOM SLOPE: 45 DEGREES (APPROX) TUBE: 2-1/2" x 2-1/2" x 24" FITS: 3" WIDE TONGUE MATERIAL: GALVANIZED MOUNT HOLE SIZE: 1/2" NOTES: FITS INSIDE TWO-PIECE ADJUSTABLE BOW STOPS AND TOPS WITH 3"x 3" TUBES TWO-PIECE SINGLE BOW REST ASSEMBLIES TWO-PIECE DOUBLE BOW REST ASSEMBLIES PO1957 TWO-PIECE BOW REST ASSEMBLY W/ WOOD ADJUSTABLE TWO-PIECE PINNACLE BOW REST ASSEMBLIES 45-DEGREE ADJUSTABLE TWO-PIECE PINNACLE BOW REST TOPS FIXED ADJUSTABLE TWO-PIECE PINNACLE BOW REST ASSEMBLIES WITH SWIVEL ADJUSTABLE TWO-PIECE PINNACLE BOW REST TOPS WITH SWIVEL TONGUE MOUNTING HARDWARE NOT INCLUDED

PO1910 ~ WINCH POST TOP CUSTOM 10 in (ADJUSTABLE)

REPRESENTATION PHOTO MAGIC TILT WINCH POST TOP ~ PO1910 TYPE: CUSTOM ADJUSTABLE WINCH POST - TOP ONLY FITS: 3" WIDE TONGUE MATERIAL: GALVANIZED HEIGHT: 16-1/2" TO ROLLER CENTER HOLE SIZE: 1/2" BRAND: MAGIC TILT NOTES: 3" x 3" BASE TUBE 11-1/2" LONG ROLLER BRACKET 11" x 4" WINCH PLATE W/ PRE-DRILLED HOLES REQUIRES 4" BOW ROLLER (NOT INCLUDED) REQUIRES A 2-1/2" WINCH POST BOTTOM (NOT INCLUDED)

PO1995 ~ PRO-DRIVE WINCH POST / SEAT (ADJUSTABLE)

REPRESENTATION PHOTO MAGIC TILT PRO DRIVE WINCH POST / SEAT ~ PO1995 TYPE: PRO-DRIVE ADJUSTABLE WINCH POST / SEAT FITS: 2" TO 3" WIDE TONGUE HEIGHT (TONGUE TO ROLLER CENTER): 14" TO 18" MATERIAL: GALVANIZED ARM LENGTH: 12" MOUNT HOLE SIZE: 1/2" BRAND: MAGIC TILT NOTES: MOUNTING HARDWARE , 4" BOW STOP , WINCH NOT INCLUDED

Winch Post - PO2157-KEN WINCH POST [18-1/2"B.E.]

SPECS SKU: PO2157 Type: KEN STYLE WINCH POST [18-1/2"B.E.] Fits: 3" Wide Tongue Material: Galv Height: 18-1/2" to bow eye Hole Size: 1/2" Brand: Magic Tilt

Winch Post - PO1930-AIRBOAT BOW/POST [Low Style]

SPECS SKU: PO1930 Type: AIRBOAT BOW STOP/POST [LOW STYLE] Material: Galvanized Height: 18" Tall Hole Size: 1/2" Brand: Magic Tilt

Winch Post - PO1940-CUST WINCH POST BOTTOM-10"

SPECS SKU: PO1940 Type: CUST WINCH POST BOTTOM-10" Fits: 3" Wide Tongue Material: Galvanized Height: 10" Hole Size: 1/2" Brand: Magic Til

Winch Post - PO1497-HD WINCH POST DOUBLE BASE

SPECS SKU: PO1497 Type: HD WINCH POST 3X3X36" DOUBLE BASE Fits: 3" Wide Tongue Material: Galvanized Height: 36" Hole Size: 1/2" Brand: Magic Tilt

PO2180 ~ WINCH POST 3" x 4" x 48" SUPER HEAVY-DUTY

REPRESENTATION PHOTO MAGIC TILT WINCH POST ~ PO2180 TYPE: SUPER HEAVY DUTY WINCH POST SIZE: 3" x 4" FITS: 3" WIDE TONGUE TUBE LENGTH: 48" VERTICAL HEIGHT: 41" SLANT: 30-DEGREES FROM VERTICAL (APPROX) MATERIAL: GALVANIZED MOUINT HOLE SIZE: 1/2" DOES NOT INCLUDE MOUNTING HARDWARE OR PO3542 END CAP

PO2179 ~ WINCH POST 3" x 4" x 48" STEEP SUPER HEAVY-DUTY

REPRESENTATION PHOTO MAGIC TILT WINCH POST ~ PO2179 TYPE: SUPER HEAVY-DUTY STEEP-ANGLE WINCH POST MATERIAL: GALVANIZED SIZE: 3" x 4" FITS: 3" WIDE TONGUE TUBE LENGTH: 48" VERTICAL HEIGHT: 31-1/2" SLOPE: 45-DEGREES (APPROX) BASE: 14" x 5" W/ 6-HOLE MOUNT HOLE SIZE: 1/2" DOES NOT INCLUDE MOUNTING HARDWARE OR PO3542 END CAP

PO2945 ~ WINCH POST 3" x 3" x 60" STRAIGHT W/ STEPS

REPRESENTATION PHOTO MAGIC TILT WINCH POST ~ PO2945 TYPE: VERTICAL WINCH POST W/ STEPS TUBE: 3" x 4" TUBE HEIGHT: 60" STEP SIZE: 9" MATERIAL: GALVANIZED BASE PLATE: 14" x 5" FOR TONGUE WIDTH: 3" TONGUE MOUNT HOLES: 1/2" BRAND: MAGIC TILT DOES NOT INCLUDE MOUNTING HARDWARE PO3542 END CAP WINCH SEAT WINCH OPTIONAL GRAB HANDLE FOR TOP PO2981

PO2160 ~ WINCH POST 3" x 3" x 30" HEAVY-DUTY 6-HOLE

REPRESENTATION PHOTO MAGIC TILT WINCH POST ~ PO2160 TYPE: HEAVY DUTY WINCH POST SIZE: 3" x 3" FITS: 2" TO 3" WIDE TONGUES TUBE LENGTH: 30" VERTICAL HEIGHT: 25-1/2" SLOPE: 30-DEGREES FROM VERTICAL (APPROX) MATERIAL: GALVANIZED MOUNT HOLE SIZE: 5" x 12" 6-HOLE PLATE W/ 1/2" HOLES BRAND: MAGIC TILT DOES NOT INCLUDE MOUNTING HARDWARE OR PO3541 END CAP

PO1485 ~ WINCH POST 3" x 3" x 30" STEEP STANDARD

REPRESENTATION PHOTO MAGIC TILT WINCH POST ~ PO1485 TYPE: HEAVY DUTY STEEP ANGLE WINCH POST SIZE: 3" x 3" FITS: 2" TO 3" WIDE TONGUES LENGTH: 30" STEEP VERTICAL HEIGHT: 19-1/2" SLOPE: 45-DEGREES (APPROX) MATERIAL: GALVANIZED MOUNT HOLE SIZE: 4-HOLE PLATE W/ 1/2" HOLES DOES NOT INCLUDE MOUNTING HARDWARE OR PO3541 END CAP

PO1470 ~ WINCH POST 3" x 3" x 36" HEAVY-DUTY

REPRESENTATION PHOTO MAGIC TILT WINCH POST ~ PO1470 TYPE: HEAVY-DUTY WINCH POST SIZE: 3" x 3" FITS: 3" WIDE TONGUE TUBE LENGTH: 36" VERTICAL HEIGHT: 30" SLOPE: 30 DEGREES FROM VERTICAL (APPROX) MATERIAL: GALVANIZED MOUNT HOLE SIZE: 6-HOLE PLATE W/ 1/2" HOLES BRAND: MAGIC TILT DOES NOT INCLUDE MOUNTING HARDWARE OR PO3541 END CAP

PO2166 ~ WINCH POST 3" x 3" x 24" STANDARD

REPRESENTATION PHOTO MAGIC TILT WINCH POST ~ PO2166 TYPE: STANDARD DUTY WINCH POST SIZE: 3" x 3" TONGUE WIDTH: 2" TO 3" WIDE VERTICAL HEIGHT: 20-1/2" LENGTH: 24" MOUNT HOLE SIZE: 1/2" SLOPE: 30° FROM VERTICAL (APPROXIMATE) MATERIAL: GALVANIZED BRAND: MAGIC TILT DOES NOT INCLUDE MOUNTING HARDWARE OR PO3541 END CAP

PO3400 ~ WINCH POST 3" x 3" x 30" LIGHT-DUTY

REPRESENTATION PHOTO MAGIC TILT WINCH POST ~ PO3400 TYPE: LIGHT-DUTY WINCH POST SIZE: 3" x 3" FITS: 2" TO 3" WIDE TONGUE MOUNT HOLE SIZE: 1/2" LENGTH: 30" VERTICAL HEIGHT: 27-1/2" SLOPE: 20 ° FROM VERTICAL (APPROX) MATERIAL: GALVANIZED BRAND: MAGIC TILT NOTES: THIS IS A LIGHT-DUTY POST (11 GUAGE) FOR UP TO 1500 LB. WINCHES. DOES NOT INCLUDE MOUNTING HARDWARE OR PO3541 END CAP

PO2161 ~ WINCH POST 3" x 3" x 30" HEAVY-DUTY 4-HOLE

REPRESENTATION PHOTO MAGIC TILT WINCH POST ~ PO2161 TYPE: HEAVY-DUTY WINCH POST SIZE: 3" x 3" FITS: 2" TO 3" WIDE TONGUES TUBE LENGTH: 30" VERTICAL HEIGHT: 27-1/2" SLOPE: 20-DEGREES FROM VERTICAL (APPROX) MATERIAL: GALVANIZED MOUNT HOLE SIZE: 4-HOLE PLATE W/ 1/2" HOLES BRAND: MAGIC TILT DOES NOT INCLUDE MOUNTING HARDWARE OR PO3541 END CAP

End Caps Bell - PQ3020 - BELL 4" 1/2"HOLE-PVC YELLOW

SPECS SKU: PQ3020 Type: End Cap Bell Size: 4-1/2" End Cap Bell Color: PVC YELLOW Width: 4-1/2" Hole Size: 1/2" Brand: StoltZ

End Caps Bell - PQ1452 -POLY BELL 4" 1/2"

SPECS SKU: PQ1452 Width: 4" Hole Size: 1/2" Brand: Stoltz

End Caps Bell - PQ3070 - 3"END CAP-PVC YELLOW

SPECS SKU: PQ3070 Type: 3" End Cap Color: PVC Yellow Width: 3" Hole Size: 1/2" Brand: StoltZ

End Caps Bell - PQ2070 - 3"END CAP -YELLOW

SPECS SKU:PQ2070 Type:3" End Cap Color:HD Yellow Width:3" Hole Size:1/2" Brand:StoltZ Weight:.20Lbs

PQ1600 ~ ROLLER END CAP WHEEL 8-1/2" (STOLTZ)

REPRESENTATION PHOTO MAGIC TILT END CAP WHEEL ~ PQ1600 TYPE: ROLLER END CAP WHEEL MATERIAL: POLY SIZE: 8-1/2" WIDE x 1-1/2" THICK HOLE SIZE: 1/2" COLOR: ORANGE BRAND: STOLTZ NOTES: SOLD INDIVIDUALLY OFTEN USED ON SKIFFS OR ANY BOW WITH A LARGE PROTRUSION WHERE ADDITIONAL STANDOFF IS REQUIRED.

End Caps Bell - PQ1450 - POLY END CAP 3"

SPECS SKU:PQ1450 Type:3" Poly End Cap Material:Poly Width:3" Hole Size:1/2" Brand:StoltZ Weight:.19Lbs

End Caps Bell - PP1935- 3" END CAP - BLUE

SPECS SKU:PP1935 Type:End Cap Bell Size:3" End Cap Bell Color:Blue Width:3" Hole Size:1/2" Brand:StoltZ Weight:.35Lbs

End Caps Bell - PP1920 - BELL 4" 1/2" HOLE[Black]

SPECS SKU:PP1920 Type:End Cap Bell Size:4" End Cap Bell Color:Black Material:Heavy Duty Rubber Width:4" Hole Size:1/2" Brand:Yates Weight:1Lbs

End Caps Bell - PP1918 - BELL 3" 1/2"HOLE [Black]

SPECS SKU:PP1918 Type:End Cap Bell Size:3-1/2" End Cap Bell Color:Black Material:Heavy Duty Rubber Width:3-1/2" Hole Size:1/2" Brand:Yates Weight:1Lbs

PQ1650 ~ BOW STOP ROLLER ASSEMBLY 8"

REPRESENTATION PHOTO MAGIC TILT ROLLER ASSEMBLY ~ PQ1650 TYPE: BOW STOP ROLLER ASSEMBLY SIZE: 8" MATERIAL: POLY COLOR: ORANGE APPLICATION: SKIFFS AND FLAT-NOSED BOWS BRAND: STOLTZ * SELECT INNER ROLLER LENGTH (3" OR 4") IN DROP-DOWN. CORRECT BOLT LENGTH WILL BE INCLUDED. INCLUDES: 1 x BOW STOP ROLLER * 2 x PQ1600 WHEEL 8" 1 x CAPSCREW PLATED 1/2 x * GR5 1 x NYLOCK NUT 1/2-13 PLATED 2 x WASHER FLAT 1/2 GALVANIZED

End Caps Bell - PO1745 - BOW STOP - TJ WHEELS

SPECS SKU:PO1745 Size:3" Bow Stop Color:Black

End Caps Bell - PQ2030 -BELL 3" 1/2" HOLE-YELLOW

SPECS SKU: PQ2030 Width: 3" Hole Size: 1/2" Brand: StoltZ

End Caps Bell - PQ3030 - BELL 3" 1/2"HOLE-PVC YELLOW

SPECS SKU: PQ3030 Color: PVC Yellow Width: 3" Hole Size: 1/2" Brand: StoltZ

End Caps Bell - PQ2020 - BELL 4" 1/2"HOLE-YELLOW

SPECS SKU: PQ2020 Type: End Cap Bell Size: 4-1/2" End Cap Bell Color: YELLOW Width: 4-1/2" Hole Size: 1/2" Brand:StoltZ

Winch Post Caps - PO3535 - 2" CHANNEL WINCHCAP

SPECS SKU: PO3535 Type: 2" CHANNEL WINCH POST CAP Size: 2"

Winch Post Caps - PO3541 - 3X3 WINCH POST CAP

SPECS SKU: PO3541 Type: 3X3 WINCH POST CAP Fits: 3x3 Winch Post

Winch Post Caps - PO3542- 3X4 WINCH POST CAP

SPECS SKU: PO3542 Type: 3X4 WINCH POST CAP Fits: 3x4 Winch Post

Winch Post Caps - PO3538- 1-1/2" WINCH POST CAP

SPECS SKU: PO3538 Type: 1-1/2X1-1/2" WINCH POST CAP PLUG Fits: 1-1/2X1-1/2 Winch Post

PO1980 ~ BOW STOP "U" BRACKET

REPRESENTATION PHOTO MAGIC TILT "U" BRACKET ~ PO1980 TYPE: BOW STOP "U" BRACKET WIDTH: 3-1/4" HEIGHT: 10" MATERIAL: GALVANIZED NOTES: DOES NOT INCLUDE MOUNTING HARDWARE , PM1000 WINCH , ROLLER

PO3295 ~ TURN BUCKLE 20-1/4"

REPRESENTATION PHOTO MAGIC TILT TURN BUCKLE ~ PO3295 SIZE: 20-1/4"

NW0192 ~ PINNACLE BOW REST REPLACEMENT BUMPER

REPRESENTATION PHOTO MAGIC TILT D-4 BUMPER ~ NW0192 TYPE: PINNACLE REPLACEMENT BUMPER (EACH) COLOR: GREY LENGTH: 10" WIDTH: 4-1/2" HEIGHT: 3-1/2" SOLD INDIVIDUALLY NOTES: MOUNTING HARDWARE NOT INCLUDED USED ON THE FOLLOWING BOW STOPS (NOT INCLUDED) PO1976 , PO1976N , PO1977 , PO1977N , PO1978 , PO1997 , PO1998

BOW EYE SAFETY CHAIN - PV1705 - HD CHAIN W/1 HOOK 54"

SPECS SKU: PV1705 Type: HD CHAIN W/1 HOOK 54" Length: 54" Finish: Zinc Plated

BOW EYE SAFETY CHAIN - PV1711 - 1/4" CHAIN W/ONE HOOK 40"

SPECS SKU: PV1711 Type: 1/4" CHAIN W/ONE HOOK 40" Length: 40" Finish: Zinc Plated

BOW EYE SAFETY CHAIN - PV1720-CHAIN-1/4 X 30"[EA]

SPECS SKU: PV172O Type: SAFETY CHAIN-1/4 X 30"[EA] Length: 30"

BOW EYE SAFETY CHAIN - PV1545 - BOW EYE SAFETY CHAIN[EA]

SPECS SKU: PV1545 Type: BOW EYE SAFETY CHAIN Material: Zinc plated Length: 16"

BOW EYE SAFETY CHAIN - PV1721 -SAFETY CHAIN-1/4 X 30"[PAIR]

SPECS SKU: PV1721 Type: SAFETY CHAIN-1/4 X 30"[PAIR] Length: 30"

MAGIC TILT SHARK DECAL - PV9732-MAGIC TILT SHARK[1-7/8"X16"]

SPECS SKU: PV9732 Type: MAGIC TILT SHARK DECAL - 1-7/8"X16" Size: 1-7/8"X16"

MAGIC TILT SHARK DECAL - PV9732-1-MAGIC TILT SHARK[2-3/4"x22"]

SPECS SKU: PV9732-1 Type: MAGIC TILT SHARK DECAL - 2-3/4"x22" Size: 2-3/4"x22"

MAGIC TILT SHARK DECAL - PV9732-2-MAGIC TILT SHARK[4"x34"]

Specs SKU: PV9732-2 Type: MAGIC TILT SHARK DECAL - 4"x34" Size: 4"x34"

MAGIC TILT SHARK NON SKID DECAL - PV9000-NON-SKID DECAL-S/A[5-1/2"X24"]

SPECS SKU: PV9000 Type: MAGIC TILT SHARK NON SKID DECAL - S/A [5-1/2"X24"] Size: 5-1/2"X24" Color: Black With MT Logo Material: Non-Skid Tape

MAGIC TILT SHARK NON SKID DECAL - PV9001-NON SKID DECAL-TDM [5-1/2"X36"]

SPECS SKU: PV9001 Type: MAGIC TILT SHARK NON SKID DECAL - TDM Size: 5-1/2"X36" Color: Black With MT Logo Material: Non-Skid Tape

MAGIC TILT SHARK NON SKID DECAL - PV9002-NON SKID DECAL - TRIPLE [7" X 60"]

SPECS SKU: PV9002 Type: MAGIC TILT SHARK NON SKID DECAL - TRIPLE Size: 7" X 60" Color: Black With MT Logo Material: Non-Skid Tape

PO2612 ~ CROSSMEMBER GALVANIZED PONTOON 2" x 2" x 84"

REPRESENTATION PHOTO MAGIC TILT CROSS-MEMBER ~ PO2612 TYPE: PONTOON CROSS-MEMBER W/ OUT TABS SIZE: 2" x 2" LENGTH: 84" GUAGE: 11 MATERIAL: GALVANIZED NOTES: DOES NOT HAVE ANY PRE-DRILLED HOLES END PLUGS NOT INCLUDED

PO2610 ~ CROSSMEMBER GALVANIZED PONTOON 2" x 2" x 96"

REPRESENTATION PHOTO MAGIC TILT CROSS-MEMBER ~ PO2610 (PLEASE CALL 941-358-1117 FOR SHIPPING QUOTE) TYPE: PONTOON CROSS-MEMBER W/ OUT TABS SIZE: 2" x 2" LENGTH: 96" GUAGE: 11 MATERIAL: GALVANIZED NOTES: DOES NOT HAVE ANY PRE-DRILLED HOLES END PLUGS NOT INCLUDED

Stabilizer Jack - PV1080-STABILIZER JACK [11-1/2"]

SPECS SKU: PV1080 Type: ATWOOD STABILIZER JACK [11-1/2"] Color: Black Height: Collapsed- 11-1/2" Capacity: 650Lbs Hole Size: 3/8" mounting holes

3"X4" Galvanized Tongue - PU5002 - 3"X4" PER FOOT 7GA

SPECS SKU:PU5002 Type:3"X4" Tongue Size:3"X4"XPer Foot Material:Galvanized Width:3" Height:4" Length:Per Foot Gauge:7 GA Weight:8Lbs

3"X4" Galvanized Tongue - PU5000 -3"X4" PER FOOT 11GA

SPECS SKU: PU5000 Type: GALVANIZED TUBE 3"X4" PER FOOT 11GA Material: Galvanized Width: 3" Height: 4" Length: Per Foot Gauge: 11ga

3"X4" Galvanized Tongue - PU2750- 3" X 4" X 6' 11 GA

SPECS SKU: PU2750 Type: TONGUE 3" X 4" X 6' 11 GA Size: 3" X 4" X 6' Material: Galvanized Width: 3" Height: 4" Length: 6ft Gauge:11 GA

Swing Tongue Pivot Boxes - PU1425- 3X5 PIVOT BOX-GALV

SPECS SKU: PU1425 Type: 3X5 SWING TONGUE PIVOT BOX-UFP GALV Size: 3x5 MaterialGalvanized BrandUFP

Swing Tongue Pivot Boxes - PU1426 - 3X3 PIVOT BOX-GALV

SPECS SKU: PU1426 Size: 3x3 Material: Galvanized Brand: UFP

Swing Tongue Pivot Boxes - PU1427 - 3X4 PIVOT BOX-GALV

SPECS SKU: PU1427 Size: 3x4 Material: Galvanized Brand: UFP

PT1535 ~ BUNK BRACKET 4" PONTOON (KARAVAN 100-02456-GL)

REPRESENTATION PHOTO MAGIC TILT BUNK BRACKET ~ PT1535 TYPE: PONTOON BUNK BRACKET WIDTH: 5" LENGTH: 11" HEIGTH: 4" MATERIAL: GALVANIZED BRAND: KARAVAN 100-02456-GL LAG SCREWS AND U-BOLTS NOT INCLUDED

PT2018 ~ PONTOON WING BRACKET

REPRESENTATION PHOTO MAGIC TILT PONTOON WING BRACKET ~ PT2018 TYPE: PONTOON WING BRACKET LENGTH OVERALL: 15-5/8" WIDTH OVERALL: 3" HEIGHT OVERALL: 4-3/4" PITCH: 25-DEGREES FROM HORIZONAL MATERIAL: GALVANIZED NOTES: SLOTTED HOLES IN BRACKET ALLOW FOR ADJUSTMENT & STABILITY MULTIPLE MOUNTING HOLES IN WINGS ALLOW YOU TO USE LAG SCREWS OR FANG BOLTS TO SECURE HORIZONTAL BUNKS CAN ACCOMODATE 4", 6", 8" WIDE HORIZONTAL BUNK BOARDS

PT2025 ~ PONTOON WING BRACKET WITH YOKE

REPRESENTATION PHOTO MAGIC TILT PONTOON WING BRACKET ~ PT2025 TYPE: PONTOON WING BRACKET LENGTH OVERALL: 13-5/8" WIDTH OVERALL: 3" HEIGHT OVERALL: 7-3/4" PITCH: 40-DEGREES FROM HORIZONAL APPLICATION: BOLTS OVER 2" x 2" CROSSMEMBERS WITH 3/8" x 3" GALVANIZED BOLTS CROSSMEMBERS: PO2612 (84"), PO2610 (96"), OR BULK TUBING MATERIAL: GALVANIZED NOTES: HOLES IN WINGS ALLOW YOU TO USE LAG SCREWS OR FANG BOLTS TO SECURE HORIZONTAL BUNKS CAN ACCOMODATE 4", 6", 8" WIDE HORIZONTAL BUNK BOARDS

3" x 3" 76"FW "V" Torsion Axles - PH1558-1-AX[V]3X3 HD DISC 76FRM ASSY

SPECS SKU: PH1558 Type: TORSION AX[V]3X3 HD DISC 76FRM ASSY Material: Galvanized Capacity: 3500Lbs FW: 76" Hubs: 5 Lug Disc Spindle/Bearings: 1-3/8X1-1/16" Brand: UFP

3" x 3" 76"FW "V" Torsion Axles - PH1558-AX[V]3X3 HD 5LUG 76FRM ASSY

SPECS SKU: PH1558 Type: TORSION AX[V]3X3 HD 76FRM ASSY Material: Galvanized Capacity: 3500Lbs FW: 76" Hubs: 5 Lug Spindle/Bearings: 1-3/8X1-1/16" Brand: UFP

3-1/2" x 3-1/2" 79"FW Straight Torsion Axles - PH1742-1 -AX [STR]3-1/2 79" FRM [No Hubs]

SPECS SKU: PH1742-1 Type: TORSION AX [STR] 3-1/2X3-1/2 79" FRAME [NO HUBS] Capacity: 5200 FW:79" Hubs: NONE Brand: UFP

3-1/2" x 3-1/2" 79"FW Straight Torsion Axles - PH1590 - TORSION AX[STR]3-1/2 6L 79FRM

SPECS SKU: PH1590 Type: TORSION AX[STR]3-1/2 6L 79FRM Capacity: 5200lbs FW: 79" Hubs: 6 Lug Brand: UFP

3-1/2" x 3-1/2" 79"FW Straight Torsion Axles - PH1590-1-AX[STR]3-1/2 6L DISC 79FM

SPECS SKU: PH1590-1 Type: TORSION AX[STR]3-1/2 6L DISC 79F Capacity: 5200lbs FW: 79" Hubs: 6 Lug Disc Brand: UFP

4" x 4" 79"FW Straight Torsion Axles - PH1512-1-AX 4X4X81" ASSY 6L DISC

SPECS SKU: PH1512-1 Type: TORSION AX 4X4X79" ASSY 6L DISC Material: Galvanized Capacity: 5200Lbs FW: 79" (81" tube length) Hubs: 6 Lug Disc Spindle/Bearings: 1-1/4 X 1-3/4" Brand: UCF

4" x 4" 79"FW Straight Torsion Axles - PH1512-AX 4X4X81" ASSY 6L

SPECS SKU: PH1512 Type: TORSION AX 4X4X79" ASSY 6L Material: Galvanized Capacity: 5200Lbs FW: 79" (81" tube length) Hubs: 6 Lug Spindle/Bearings: 1-1/4 X 1-3/4" Brand: UCF

4" x 4" 79"FW Straight Torsion Axles - PH1513-SS-AX[STR]4X4X81 DISC 8L ASSY SS

SPECS SKU: PH1513-SS Type: TORSION AX[STR]4X4X79 DISC 8L ASSY SS Material: Galvanized Capacity: 7000 FW: 79" (81" tube length) Hubs: 8 Lug Stainless Steel Disc Spindle/Bearings: 1-1/4 X 1-3/4" Brand: UCF

4" x 4" 79"FW Straight Torsion Axles - PH1513-1-AX[STR]4X4X81 DISC 8L ASSY

Specs SKU: PH1513-1 Type: TORSION AX[STR]4X4X79 DISC 8L ASSY Size: [STR]4X4X79 Hub: 8 lug Disc Rotors FW: 79" (81" tube length)

4" x 4" 79"FW Straight Torsion Axles - PH1513-AX[STR]4X4X81 ASSY 8L

Specs SKU: PH1513 Type: TORSION AX[STR]4X4X79 ASSY 8L Material: Galv Hubs: 8 Lug FW: 79" (81" tube length)

4" x 4" 79"FW Straight Torsion Axles - PH150-27-AX[STR]4X4X81"5200#[No Hubs]

Specs SKU: PG150-27 Type: TORSION 4X4X79" 5200# - NO HUBS Material: Galv Size: X4X79" Capacity: 5200# Hubs: None FW: 79" (81" tube length)

4" x 4" 79"FW Straight Torsion Axles - PH150-36-AX[STR]4X4X81" 7000#

Specs SKU: PH150-36 Type: TORSION 4X4X79" 7000# Material: Galv Size: 4X4X79" Capacity: 7000# Hubs: None FW: 79" (81" tube length)

PE1855 ~ RACE 1-1/4" (14276)

REPRESENTATION PHOTO MAGIC TILT RACE ~ PE1855 COMMERCIAL NUMBER: 14276 SPINDLE: 1-1/4" SOLD INDIVIDUALLY NOTES: FOR 8 LUG HUBS

PE1900 ~ RACE 1-3/4" (25520)

REPRESENTATION PHOTO MAGIC TILT RACE ~ PE1900 COMMERCIAL NUMBER: 25520 SPINDLE: 1-3/4" SOLD INDIVIDUALLY

PE1710 ~ RACE 1-1/16" (44610)

REPRESENTATION PHOTO MAGIC TILT RACE ~ PE1710 COMMERCIAL NUMBER: 44610 BEARING SIZE: 1" OR 1-1/16" SOLD INDIVIDUALLY

PE1749 ~ RACE 1-3/8" (68110)

REPRESENTATION PHOTO MAGIC TILT RACE ~ PE1749 COMMERICAL NUMBER: 68110 SPINDLE: 1-3/8" SOLD INDIVIDUALLY

PE1750 ~ RACE 1-3/8" (68111)

REPRESENTATION PHOTO MAGIC TILT RACE ~ PE1750 COMMERCIAL NUMBER: 68111 SPINDLE: 1-3/8" SOLD INDIVIDUALLY

PE1800 ~ RACE 1-1/4" (67010)

REPRESENTATION PHOTO MAGIC TILT RACE ~ PE1800 COMMERCIAL NUMBER: 67010 SPINDLE: 1-1/4" FINSIH: ZINC PLATED SOLD INDIVIDUALLY

PE1850 ~ RACE 1-1/4" (15245)

REPRESENTATION PHOTO MAGIC TILT H.D. RACE ~ PE1850 COMMERCIAL NUMBER: 15245 SPINDLE: 1-1/4" SOLD INDIVIDUALLY NOTES: FOR 6 LUG HEAVY DUTY NON-UFP HUBS

PO1996 ~ PRO-DRIVE WINCH POST ASSEMBLY (ADJUSTABLE)

REPRESENTATION PHOTO MAGIC TILT PRO DRIVE WINCH POST ASSEMBLY ~ PO1996 * PLEASE SPECIFY TONGUE SIZE IN DROP-DOWN * TYPE: PRO-DRIVE ADJUSTABLE WINCH POST W/ SEAT & STOP MATERIAL: GALVANIZED FITS: 2" TO 3" WIDE TONGUES HEIGHT (TONGUE TO ROLLER CENTER): 14" TO 18" ARM LENGTH: 12" MOUNT HOLE SIZE: 1/2" NOTES: USES PO1995 WINCH POST DOES NOT INCLUDE WINCH INCLUDES: MOUNTING HARDWARE FOR TONGUE - SPECIFY TONGUE HEIGHT SIZE IN DROP-DOWN BOW ROLLER BOW EYE SAFETY CHAIN

Undercarriage Angles for Tandem Axle - PK2600 - 63.5"ANGLE-8"STEP 13" Tire

SPECS SKU:PK2600 Type: 63.5"ANGLE-8"STEP 13" TIRE TNDM. Size:63.5" Fits:13" Tire Material:Galvanized Side:LH/RH Step Size:8"

Undercarriage Angles for Tandem Axle - PK2650 - 63.5"ANGLE-12"STEP 13"Tire

SPECS SKU:PK2650 Type: 63.5"ANGLE-12"STEP 13"TIRE TNDM. Size:63.5" Fits:13" Tire Material:Galvanized Side:LH/RH Step Size:12"

Undercarriage Angles for Tandem Axle - PK2690- 71"ANGLE-8"STEP 14"Tire

SPECS SKU:PK2690 Type: 71"ANGLE-8"STEP 14"TIRE Size:71" Fits:14" Tire Material:Galvanized Side:LH/RH Step Size:8"

Undercarriage Angles for Tandem Axle - PK2700-71"ANGLE-12"STEP 14"Tire

SPECS SKU:PK2700 Type: 71"ANGLE-12"STEP 14"TIRE Size:71" Fits:14" Tire Material:Galvanized Side:LH/RH Step Size:12"

PK2705 ~ 2-AXLE UNDERCARRIAGE 78" WITH STEPS

REPRESENTATION PHOTO MAGIC TILT UNDERCARRIAGE ~ PK2705 TYPE: TANDEM AXLE UNDERCARRIAGE WITH WELDED STEPS LENGTH: 78" TRAILER SIDE: LEFT OR RIGHT MOUNT LOCATION: OUTSIDE OF FRAME STEP LENGTH: 12" SPRINGS: 25-1/4" DOUBLE-EYE (NOT INCLUDED) EQUALIZER: 6-1/2" PK1950 (NOT INCLUDED) MOST COMMON TIRE SIZE: 15" FENDER: PI1715 (NOT INCLUDED) MATERIAL: GALVANIZED NOTES: NO FRAME MOUNTING HOLES PRIMARILY USED ON GALVANIZED TRAILERS USES TWO U-BOLTS TO GO AROUND TUBE OR C-CHANNEL FRAMES (NOT INCLUDED) AXLE & SPRING-TO-UNDERCARRIAGE HARDWARE KITS: 2x2 AXLES: GALVANIZED PK1150 , STAINLESS/GALV PK1150-SS 2x3 AXLES: GALVANIZED PK1152 , STAINLESS/GALV PK1152-SS SPRING EYE BOLT: PK1450

PK2655 ~ 2-AXLE UNDERCARRIAGE 71" 68" FENDERS FOR ALUMINUM STEPS

Magic Tilt Undercarriage ~ PK2655 Type: Tandem axle undercarriage for aluminum steps Length: 71" Trailer Side: Left Or Right Mount Location: Outside Of Frame Step Size: 10" Aluminum Step Pads (sold separately) Most Common Tire Size: 14" Distance Between Brackets: 67-1/2" Spring Size: 25-1/4" Double Eye (sold separately) Equalizer: 6-1/4" PK1950 (sold separately) Fenders: PI1905 Or PI1906-S (sold separately) Material: Galvanized Good to know: Primarily used on aluminum i-beam trailers Hole size for mounting to frame: 1/2" On 4-1/4" Centers Bolt pattern for mounting to frame may not match existing undercarriage Axle & Spring-to-undercarriage hardware kits: 2x2 Axles: Galvanized PK1150 , Stainless/Galv PK1150-SS 2x3 Axles: Galvanized PK1152 , Stainless/Galv PK1152-SS Spring Eye Bolt: PK1450

PK2550 ~ 2-AXLE UNDERCARRIAGE 63-1/2" NO STEPS

REPRESENTATION PHOTO MAGIC TILT UNDERCARRIAGE ~ PK2550 TYPE: TANDEM AXLE UNDERCARRIAGE NO STEPS LENGTH: 63-1/2" TRAILER SIDE: LEFT OR RIGHT MOUNT LOCATION: OUTSIDE OF FRAME SPRINGS: PJ1350 (NOT INCLUDED) EQUALIZER: PK1950 STEP SIZE: NONE MOST COMMON TIRE SIZE: 10" & 12" MATERIAL: GALVANIZED NOTES: NO STEPS, FENDER BRACKETS, FRAME MOUNT HOLES USES TWO U-BOLTS TO GO AROUND TUBE OR C-CHANNEL FRAMES (NOT INCLUDED) BOTTOM CAN BE DRILLED TO BOLT DIRECTLY UNDER AN I-BEAM FRAME AXLE & SPRING-TO-UNDERCARRIAGE HARDWARE KITS: 2x2 AXLES: GALVANIZED PK1150 , STAINLESS/GALV PK1150-SS 2x3 AXLES: GALVANIZED PK1152 , STAINLESS/GALV PK1152-SS SPRING EYE BOLT: PK1450

PK2770 ~ 3-AXLE UNDERCARRIAGE 112" WITH STEPS

REPRESENTATION PHOTO (PLEASE CALL 941-358-1117 FOR SHIPPING QUOTE) MAGIC TILT UNDERCARRIAGE ~ PK2770 TYPE: TRIPLE AXLE UNDERCARRIAGE WITH WELDED STEPS LENGTH: 112" TRAILER SIDE: LEFT OR RIGHT MOUNT LOCATION: OUTSIDE OF FRAME SPRINGS: 25-1/4" DOUBLE -EYE (NOT INCLUDED) EQUALIZER: (NOT INCLUDED) STEP LENGTH: 12" FENDER: PI1955 OR PI1956-S (NOT INCLUDED) MOST COMMON TIRE SIZE: 14" & 15" MATERIAL: GALVANIZED NOTES: NO FRAME MOUNTING HOLES USED ON ALUMINUM AND GALVANIZED TRAILERS USES U-BOLTS TO GO AROUND TUBE OR C-CHANNEL FRAMES (NOT INCLUDED) AXLE & SPRING-TO-UNDERCARRIAGE HARDWARE KIT: PK1153 SPRING EYE BOLT: PK1450

BRAKE PADS - PG4849-4 UNIVERSAL BRAKE PAD (SET)

SPECS: SKU: PG4849-4 Type: UNIVERSAL BRAKE PAD, UFP DB35 Brand: UFP Complete axle set, pre-boxed as full axle set of 4

PG4849 ~ DISC BRAKE PAD DEXTER / UFP 1-PAD ONLY

REPRESENTATION PHOTO MAGIC TILT BRAKE PAD ~ PG4849 TYPE: DISC BRAKE PAD FINISH: PAINTED STEEL BRAND: DEXTER / UFP SOLD INDIVIDUALLY NOTES: CONTAINS ONLY ONE BRAKE PAD. ORDER TWO TO OUTFIT ONE CALIPER. CAN ONLY BE USED ON DEXTER/UFP BRAKE SYSTEMS

Dust Caps - PE2304-DUST CAP W/HOLE 2.32 6LUG

SPECS SKU: PE2304 Type: DUST CAP 2.328W/HOLE 6 LUG HUB DISC Size: 2.328 Fits:6 Lug hub

Dust Caps - PE2250- DUST CAP 1" (1.980)

SPECS SKU:PE2250 Type: DUST CAP 1" (1.980) Size:1.98

Dust Caps - PE2301-DUST CAP W/HOLE 1.980

SPECS SKU: PE2301 Type: DUST CAP [CENTER HOLE] 1.980 Size: 1.98 Material: Zinc plated Diameter:1.98" Height:1.4" Thickness:03"

Dust Caps - PE2308-DUST CAP W/HOLE 2.717 8LUG

SPECS SKU:PE2308 Type: DUST CAP W/CENTER HOLE 2.717 8LUG Size: 2.717 Fits:8 Lug hub

PE2311 ~ CENTER HOLE CAP RUBBER PLUG (POSI-LUBE)

REPRESENTATION PHOTO MAGIC TILT RUBBER PLUG FOR POSI-LUBE DUST CAPS ~ PE2311 TYPE: UNIVERSAL DUST CAP RUBBER PLUG DIAMETER: 1-1/2" BRAND: UFP SOLD INDIVIDUALLY NOTES: FITS ALL MODERN POSI-LUBE DUST CAPS OLDER POSI-LUBE DUST CAPS FOR 6 AND 8-LUG HUBS ONCE USED A LARGER PLUG. ALL NEWER DUST CAPS USE THIS UNIVERSAL PLUG.

Rubber Plugs for Center Hole Cap - PE2306-RUBBER PLUG-KNOTT

Specs SKU: PE2306 Type: RUBBER PLUG FOR DUST CAP - KNOTT

Bearing Protectors - PF1102- PROTECTOR #2.328[EACH]

Desc SKU: PF1102 Type: BEARING PROTECTOR #2.328[EACH] Size: 2.32" Finish: Stainless Steel

Bearing Protectors - PF1103-PROTECTOR 2.717 [EACH]

Desc SKU: PF1103 Type: BEARING PROTECTOR 2.717 [EACH] Size: 2.717" Finish: Stainless Steel

Bearing Protectors - PF1054-PROTECTOR S/S #1.980 EACH

Desc SKU: PF1054 Type: BEARING PROTECTOR S/S #1.980 EACH Size: 1.98" Finish: Stainless Steel

Bearing Protectors - PF1053-PROTECTOR SET S/S #1.980

Desc SKU: PF1053 Type: BEARING PROTECTOR SET S/S #1.980 [Pair] Size: 1.98" Finish: Stainless Steel

Bearing Protector Bras - PF1060-PROTECTOR BRA 1.980 [EA]

Bearing Protector Bras - PF1063-PROTECTOR BRA 2.328/2.441/2.717[EA]

Brake Line Kits for Single Axle - PG1330-BRAKE LINE KIT S/A 24'

Specs SKU: PG1330 Type: HYD. BRAKE LINE KIT S/A 24' Contains: 1- HYD. BRAKE HOSE W/SWIVEL 24' 1- HYD.BRAKE/BRASS T-FITTING 1- HYD. BRAKE HOSE W/SWIVEL 1' 1- HYD. BRAKE HOSE W/SWIVEL 6'6" 10 - PLASTIC WIRE TIE HD 14-1/2""

Brake Line Kits for Single Axle - PG1336-BRAKE LINE KIT S/A 26'

Specs SKU: PG1336 Type: HYD.BRAKE LINE KIT S/A 26' Contains: 1- HYD. BRAKE HOSE W/SWIVEL 26' 1- HYD.BRAKE/BRASS T-FITTING 1- HYD. BRAKE HOSE W/SWIVEL 1' 1- HYD. BRAKE HOSE W/SWIVEL 6'6" 10 - PLASTIC WIRE TIE HD 14-1/2""

Brake Line Kits for Single Axle - PG1340-BRAKE LINE KIT S/A 30'

Specs SKU: PG1340 Type: HYD.BRAKE LINE KIT S/A 30' Contains: 1- HYD. BRAKE HOSE W/SWIVEL 30' 1- HYD.BRAKE/BRASS T-FITTING 1- HYD. BRAKE HOSE W/SWIVEL 1' 1- HYD. BRAKE HOSE W/SWIVEL 6'6" 10 - PLASTIC WIRE TIE HD 14-1/2""

Brake Line Kits for Single Axle - PG1326-BRAKE LINE KIT S/A 21'

Specs SKU: PG1326 Type: HYD. BRAKE LINE KIT S/A 21' Contains: 1 - HYD. BRAKE HOSE W/SWIVEL 21'1- HYD.BRAKE/BRASS T-FITTING 1- HYD. BRAKE HOSE W/SWIVEL 1' 1- HYD. BRAKE HOSE W/SWIVEL 6'6" 10 - PLASTIC WIRE TIE HD 14-1/2""

Brake Line Kits for Single Axle - PG1328-BRAKE LINE KIT S/A 23'

Specs SKU: PG1328 Type: HYD. BRAKE LINE KIT S/A 23' Contains: 1- HYD. BRAKE HOSE W/SWIVEL 23' 1- HYD.BRAKE/BRASS T-FITTING 1- HYD. BRAKE HOSE W/SWIVEL 1' 1- HYD. BRAKE HOSE W/SWIVEL 6'6" 10 - PLASTIC WIRE TIE HD 14-1/2""

Brake Line Kits for Single Axle - PG1325-BRAKE LINE KIT S/A 19'

Specs SKU: PG1325 Type: HYD.BRAKE LINE KIT S/A 19' Contains: 1- HYD. BRAKE HOSE W/SWIVEL 19' 1- HYD.BRAKE/BRASS T-FITTING 1- HYD. BRAKE HOSE W/SWIVEL 1' 1- HYD. BRAKE HOSE W/SWIVEL 6'6" 10 - PLASTIC WIRE TIE HD 14-1/2""

Custom Step Pads - PI4025-1 -CUST STEP W/NON-SKID [ LF &RR]

SPECS SKU: PI4025-1 Type: CUSTOM STEP PAD SMOOTH WITH BRACES LF &RR W/NON SKID Material: Aluminum

Custom Step Pads - PI4027-1 -CUST STEP W/NON SKID[RF&LR]

SPECS SKU: PI4027-1 Type: CUSTOM STEP PAD SMOOTH WITH BRACES RF & LR W/NON SKID Material: Aluminum

PG1090 ~ BRAKE ACTUATOR 7.5K IN-LINE DISC DEXTER / UFP (A-60, A-75)

REPRESENTATION PHOTO MAGIC TILT BRAKE ACTUATOR ~ PG1090 TYPE: 4-HOLE IN-LINE DISC BRAKE ACTUATOR TONGUE: 3x4, 3x5 (DO NOT USE ON 3x3 TONGUES) CAPACITY: 7500 LBS. BALL SIZE" 2" BRAKE TYPE: DISC BRAKES ONLY BRAND: DEXTER / UFP (A-60, A-75) NOTES: FOR 3x4 AND 3x5 TONGUES ONLY USE PG1091 FOR 3x3 TONGUES REPLACEMENT EMERGENCY CABLE PG4812 BRAKE LOCKOUT PLUG PG1075 HOW TO RELEASE THE EMERGENCY BRAKE CABLE IN TRAILER KNOWLEDGE OWNERS MANUAL

PG1095 ~ BRAKE ACTUATOR 16K DISC DEXTER / UFP (A-160)

REPRESENTATION PHOTO MAGIC TILT BRAKE ACTUATOR ~ PG1095 TYPE: TOP-MOUNT BRAKE ACTUATOR FOR: 3" WIDE TONGUE CAPACITY: 16,000 LBS. BALL SIZE: 2-5/16" BRAKE TYPE: DISC BRAKES ONLY BRAND: DEXTER / UFP (A-160) NOTES: REPLACEMENT EMERGENCY BRAKE CABLE PG4827 BRAKE LOCKOUT CLIP PG1090-1 HOW TO RELEASE THE EMERGENCY BRAKE CABLE IN TRAILER KNOWLEDGE OWNERS MANUAL

Actuators for 3" Tongues, In-Line - PG1088- 6K# 3HOLE ACTUATOR

SPECS SKU: PG1088 Type: 6000# ACTUATOR[UFP] IN-LINE DISC 3H Capacity: 6,000 lbs Brand: UFP

Actuators for 3" Tongues, In-Line W/Swing - PG1099 - 7K# ACTUATOR W/3X4 SWING ASSY

SPECS SKU: PG1099 Type: 7000# ACT W/3X4 SWING ASSY-UFP 4720 Capacity:7,000 lbs Brand:UFP

Actuators for 3" Tongues, In-Line W/Swing - PG1098 - 6K# ACTUATOR W/SWING

SPECS SKU: PG1098 Type: 6000# ACTUATOR[UFP]IN-LINE W/SWING Capacity: 6,000 lbs Brand: UFP

PG3208 ~ MASTER CYLINDER FILLER CAP DEXTER / TITAN 068-250-01

REPRESENTATION PHOTO MAGIC TILT MASTER CYLINDER FILLER CAP ~ PG3208 APPLICATION: DEXTER / TITAN MODEL 10 AND 20 ACTUATORS MATERIAL: PLASTIC BRAND: DEXTER / TITAN 068-250-01 : OLD PART NUMBER 4830601 SOLD INDIVIDUALLY

PG3104 ~ MASTER CYLINDER CAP DEXTER / TITAN 068-147-00

REPRESENTATION PHOTO MAGIC TILT MASTER CYLINDER CAP ~ PG3104 APPLICATION: MODEL 60 ACTUATOR BRAND: TITAN / DEXTER 068-147-00 : OLD PART NUMBER 4480701

MASTER CYLINDER CAPS - PG3102- MODEL 6 CYLINDER CAP

Specs SKU: PG3102 Type: MODEL 6 MASTER CYLINDER CAP

PL1118 ~ JAMMY J-VID LED "V" LIGHT BAR >80"

REPRESENTATION PHOTO MAGIC TILT SUBMERSIBLE LED LIGHT BAR ~ PL1118 TYPE: LED COLOR: RED SIDE: REAR CENTER LENGTH: 14" TRAILER WIDTH: OVER 80" BRAND: JAMMY J-VID RELATED PARTS (NOT INCLUDED) WIRE HARNESSES: 4-WAY , 5-WAY (FOR BRAKES) PL2311 BUTT CONNECTOR PL2944 WIRE TIE WITH ANCHOR CHASSIS CLIPS

PL1186 ~ LED 3-PIECE LED LIGHT BAR >80" OPTRONICS MCL97

REPRESENTATION PHOTO MAGIC TILT SUBMERSIBLE LED LIGHT BAR ~ PL1186 TYPE: LED 3-LIGHT CLEARANCE BAR LOCATION: REAR COLOR: RED LENGTH: 14-1/4" WIDTH: 1-3/16" HOLE CENTERS: 8-1/2" FOR TRAILER WIDTHS: ALL - REQUIRED FOR TRAILERS OVER 80" WIDE BRAND: OPTRONICS MCL97 NOTES: STAINLESS STEEL BAR IS CORROSION-RESISTANT WITH 3 SEALED LIGHTS PRE-WIRED WITH 36" LEAD WIRE GROUNDS THROUGH MOUNTING HARDWARE RELATED PARTS (NOT INCLUDED) WIRE HARNESSES: 4-WAY , 5-WAY (FOR BRAKES) PL2311 BUTT CONNECTOR PL2944 WIRE TIE WITH ANCHOR CHASSIS CLIPS

PG4815-1 ~ SOLENOID ASSEMBLY DEXTER / UFP (054-140-22)

REPRESENTATION PHOTO MAGIC TILT SOLENOID ASSEMBLY ~ PG4815-1 APPLICATION: DEXTER / UPF A-60, A-75, A-160 "NEW STYLE" MASTER CYLINDERS VOLTAGE: 12 BRAND: DEXTER / UFP (054-140-22) NOTES: THIS IS THE NEW-STYLE SOLENOID WITH TWO WIRES AND WITHOUT A BYPASS HOSE AND WILL ONLY WORK ON THE NEW-STYLE UFP MASTER CYLINDER PG4814-1 . IT WILL NOT WORK ON THE OLD-STYLE UFP MASTER CYLINDERS THAT REQUIRE A BYPASS HOSE.

Actuator Components - PG4814-A-60/75 MASTER CYLINDER W/O SOL

SPECS SKU: PG4814 TYPE: A-60/75 MASTER CYLINDER W/O SOLENOID BRAND: UFP APPLICATIONS: A-60 AND A-70

Actuator Components - PG4815-A-60/75 SOLENOID ASSEMBLY

SPECS SKU: PG4815 TYPE: A-60/75 SOLENOID OLD STYLE CAPACITY: 12 VOLTS BRAND: UFP

Winch Straps - PN1355-WINCH STRAP 25'

SPECS SKU: PN1355 Type: WINCH STRAP 25' Length: 25' Width: 2" Capacity: 2,600 LBS. Color: Black

Winch Straps - PN1353-STRAP 2" X20' YELLOW

SPECS SKU: PN1353 Type: WINCH STRAP 2"X20' YELLOW [10,000#C Length: 20' Width: 2" Capacity: 10,000 LBS. Color: Yellow

Winch Straps - PN1390-STRAP 3"X20' YELLOW

SPECS SKU: PN1390 Type: WINCH STRAP 3" X20' YELLOW Length: 20' Width: 3" Capacity: 10,000 LBS. Color: Yellow

Winch Straps - PN1350-WINCH STRAP 20'

SPECS SKU: PN1350 Type: WINCH STRAP 20' Length: 20' Width: 2" Capacity: 2,600 LBS. Color: Black

Winch Straps - PN1360-WINCH STRAP 3"X25'

SPECS SKU: PN1360 Type: WINCH STRAP 3"X25' Length: 25' Width: 3" Capacity: 2,600 LBS. Color: Black

PG4820 ~ LATCH PIN KIT A-60, A-75, A-160 DEXTER / UFP

REPRESENTATION PHOTO MAGIC TILT LATCH PIN KIT ~ PG4820 APPLICATION: NEWER IN-LINE VERSIONS OF A-60/75 ACTUATORS, TOP-MOUNT A-160 ACTUATORS LENGTH: 3-1/2" BRAND: DEXTER / UFP NOTES: INCLUDES REPLACEMENT SNAP RING FOR 7.5K UFP ACTUATORS ATTACHES TO 16K ACTUATORS WITH POP RIVET (NOT INCLUDED)

FENDER PAD SINGLE - PI1972- 14" SGL UHMW BLACK

SPECS SKU: PI1972 Type: FENDER PAD-ALUM 14" SGL UHMW BLACK MOST COMMON TIRE SIZE: 14" LENGTH: 24" HEIGHT: 6" COLOR: BLACK MATERIAL: UHMW (SEMI-HARD PLASTIC)

Stainless Steel Flat Washers - PY1904 - WASHER FLAT S/S 7/16

SPECS SKU: PY1904 Type: WASHER FLAT S/S 7/16 Material: Stainless Steel

Stainless Steel Flat Washers - PY1902- WASHER FLAT S/S 3/8

Desc SKU: PY1902 Type: WASHER FLAT S/S 3/8 DIAMETER: 3/8" MAERIAL: STAINLESS STEEL

Stainless Steel Flat Washers - PY1905-WASHER FLAT S/S 1/2

Desc SKU: PY1905 Type: WASHER FLAT S/S 1/2 DIAMETER: 1/2" MATERIAL: STAINLESS STEEL

Stainless Steel Lock Washers - PY1020- WASHER LOCK 3/8 SS

Desc SKU: PY1020 Type: WASHER LOCK 3/8 SS DIAMETER: 3/8" MATERIAL: STAINLESS STEEL

Stainless Steel Lock Washers - PY1022 - WASHER LOCK 7/16 SS

Desc SKU: PY1022 Type: WASHER LOCK 7/16 SS DIAMETER: 7/16" MATERIAL: STAINLESS STEEL

Stainless Steel Lock Washers - PY1025- WASHER LOCK 1/2 SS

Desc SKU: PY1025 Type: WASHER LOCK 1/2 SS DIAMETER: 1/2" MATERIAL: STAINLESS STEEL

PY1701 ~ SQUARE SCREW 1/2" x 1-1/2" STAINLESS STEEL

REPRESENTATION PHOTO MAGIC TILT SQUARE HEAD SCREW ~ PY1701 TYPE: SQUARE HEAD FRAME SCREW DIAMETER: 1/2" LENGTH: 1-1/2" MATERIAL: STAINLESS STEEL NOTES: USED TO FASTEN ALL PARTS UNDERNEATH CA SERIES TRAILERS W/ SLIDE CHANNELS IT IS RECOMMENDED TO APPLY NEVER-SEIZE TO STAINLESS THREADS TO PREVENT GALLING

Stainless Steel Hex Head Screws - PY1710-SCREW HX HD S/S 3/8X1 1/4

Specs SKU: PY1710 Type: SCREW HX HD S/S 3/8X1 1/4 Size: 3/8X1 1/4 Material: SS

2″x3″ 86.5″ Track 73-3/8″SC "V" Spring Axles - PH3326- 2X3X86.5TR 73-3/8SC[No Hubs]

SPECS SKU: PH3326 Type: AX[V]2X3X86.5TR 73-3/8SC HD [NO HUBS] Tube Size: 2" x 3" Material: Galvanized Capacity: 3500Lbs Hubs: No Hubs Spindle/Bearing Size: 1-3/8X1-1/16" Spring Centers: 73-3/8" Track: 86.5" Brand: UFP

2″x3″ 86.5″ Track 73-3/8″SC "V" Spring Axles - PH3319- 2X3X86.5TR 73-3/8SC 5L W/FLNG

SPECS SKU: PH3319 Type: AX[V]2X3X86.5TR 73-3/8SC 5L W/FLNG Tube Size: 2" x 3" Material: Galvanized Capacity: 3500Lbs Hubs: 5 Lug Spindle/Bearing Size: 1-3/8X1-1/16" Spring Centers: 73-3/8" Track: 86.5" Brand: UFP

1/2" Galvanized Square U-Bolts - PY2060-UBOLT 1/2X2-3/4X4 SQ GALV

SPECS SKU: PY2060 Type: UBOLT 1/2X2-3/4X4 SQ GALV Material: Galvanized Diameter: 1/2" Width: 2-3/4" Length: 4"

RM-U-Bolt Kits (Minimum Order of 20 Each) - RM5300- 4" CHANNEL U-BOLT KIT